EFFECT OF NANOSIZED TiO2 POWDER ON PREPARATION AND PROPERTIES OF Ag-BASED ELECTRODE MATERIALS

2004 ◽  
Vol 03 (06) ◽  
pp. 829-837
Author(s):  
SOON-JONG JEONG ◽  
JUNG-HYUK KOH ◽  
DONG-YOON LEE ◽  
JAE-SEOK LEE ◽  
MUN-SU HA ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Bonding Strength ◽  
Electrode Materials ◽  
Precipitation Process ◽  
Nano Oxide ◽  
Diffusion Controlled ◽  
State Diffusion ◽  
Acid Reaction ◽  
Co Precipitation ◽  
Mechanical Bonding

This study presents the synthesis of nano-oxide-added Ag/Pd powders and its properties tolerable at temperatures above 1100°C for an electrode material utilized in multilayer ceramic devices. The powders of xAg/yPd powder around core cell TiO 2 were formed in a co-precipitation process of Ag and Pd in nano-oxide-dispersed solution, where Ag and Pd precursors are melted in HNO 3 acid. Reaction between ceramic and electrode layers with nanoparticle oxide powder allows internal stress to reduce and mechanical bonding strength to increase due to anchor effect. The densification of the nano-oxide-added electrode paste followed the TiO 2 solid state diffusion-controlled mechanism upon sintering process. The mechanical bonding strength and electrical conductivity were measured after sintering the electrode-printed sheets. As a result, very high adhesive strength over the piezoelectric ceramics' fracture strength and good electrical conductivity of more than 104/Ωcm could be obtained in the multilayer ferroelectric structure which is a form of stacking ceramics layer and electrode layer containing nanoparticles.

An investigation on the synthesis of nickel aluminate

2019 ◽  
Vol 48 (6) ◽  
pp. 487-492
Author(s):  
Liliya Frolova
Keyword(s):  
Electrical Conductivity ◽  
Single Phase ◽  
Molar Ratio ◽  
Precipitation Process ◽  
Complex Method ◽  
Nickel Aluminate ◽  
Content Type ◽  
Wide Range ◽  
Co Precipitation ◽  
Derivatographic Analysis

Purpose The purpose of this paper is to study the process of coprecipitation of polyhydroxocomplexes of nickel and aluminum from solutions of nickel (Ni) (II) sulfate and aluminum (Al) (III) sulfate with caustic soda and to study the conversion process to nickel aluminate and to check its properties. Design/methodology/approach For the thermodynamic analysis of the precipitation process, the software package MEDUSA was used. The dependences of the electrical conductivity, pH and residual concentrations as functions of the OH/Me ratio were obtained. Using X-ray phase analysis, spectroscopic analysis and derivatographic analysis, the properties of the products obtained were studied. The effects of OH/Me ratio and molar ratio cation of reagents on the physicochemical properties of the products were analyzed. Findings The paper deals with the results of theoretical and experimental research on the synthesis pigments of blue and green colors based on Ni-Al spinel. The influence of the molar ratio cation content on optical and color characterise of pigments were studied. Originality/value The original complex method of studying the processes of co-precipitation of cations in the form of hydroxides is proposed. pH precipitation of aluminum hydroxide and nickel are different. It is interesting to study their co-precipitation. The resulting single-phase product is a precursor of nickel aluminate over a wide range of cation ratios. The dependences of the electrical conductivity, pH and residual concentrations as functions of the OH/Me ratio were obtained.

scholarly journals Understanding the electrochemical performance of LiNi0. 5Mn1.5O4 coated with Yttria and distributed over graphene nanosheets as cathode in li-ion batteries

2021 ◽  
Author(s):  
Hanan Abdurehman Tariq ◽  
Zawar Alam Qureshi ◽  
Jeffin James Abraham ◽  
Shakoor Abdul ◽  
Siham Alqaradawi ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Electrode Materials ◽  
Graphene Nanosheets ◽  
Lithium Ion ◽  
Precipitation Method ◽  
Oxide Coatings ◽  
Material Synthesis ◽  
Active Particles ◽  
Co Precipitation ◽  
Synthesis Approach

LiNi0.5Mn1.5O4 is a promising cathode material for lithium-ion batteries with a high-voltage spinel structure. A microwave-assisted chemical co-precipitation method was used to synthesize Y2O3 coated quasi-spheres of LiNi0.5Mn1.5O4. The coating of Y2O3 and subsequent wrapping of quasi-spheres in graphene nanosheets does not alter the volume or promote the formation of unwanted phases. TGA analysis shows high thermal stability in the material. The material has an initial capacity of 133 mAh g−1 at C/10 with a retention of 98% after 100 cycles. In addition, cathode samples show a good capacity of 132 g−1 after 20 cycles at higher temperatures (55 °C). Oxide coatings protect the particles from ionic leaching but limit the electrical conductivity of the materials. However, graphene enhances the conductivity of the synthesized material and wraps active particles in a conductive channel. Due to the synergistic design of the material and the robust manufacturing technique, parasitic reactions are suppressed without affecting the electrical conductivity. To increase their cyclic performance, the suggested material synthesis approach may successfully be applied to various electrode materials.

Preparing Fe[sub 3]O[sub 4] Nanoparticles from Fe[sup 2+] Ions Source by Co-precipitation Process in Various pH

2011 ◽  
Author(s):  
Darminto ◽  
Machida N. Cholishoh ◽  
Feby A. Perdana ◽  
Malik A. Baqiya ◽  
Mashuri ◽  
...  
Keyword(s):  
Precipitation Process ◽  
Co Precipitation

Preparation and Properties of Fe3O4/PMMA Nanocomposite Films

2009 ◽  
Vol 79-82 ◽  
pp. 505-508
Author(s):  
Li Li ◽  
H. Zhao ◽  
Wei Wang ◽  
F.F. Nie
Keyword(s):  
Fe3o4 Nanoparticles ◽  
Chemical Structure ◽  
Silane Coupling Agent ◽  
Blood Compatibility ◽  
Nanocomposite Films ◽  
Precipitation Process ◽  
Silane Coupling ◽  
Magnetic Fe3o4 Nanoparticles ◽  
Co Precipitation ◽  
Magnetic Fe3o4

The magnetic Fe3O4 nanoparticles had been synthesized by co-precipitation process and surface treatment by silane coupling agent (KH570). The magnetic Fe3O4/PMMA nanocomposite films were prepared by blend method, and the chemical structure, mechanical properties, surface morphology and the biocompatibility of the nanocomposite films were studied in this work. The magnetic Fe3O4 nanoparticles were well dispersed in the Fe3O4/PMMA nanocomposite films. The strength of the nanocomposite films, as well as the strain, decreased first and then increased with the increasing of the nanoparticles. The hemolytic ratio indicated that the nanocomposite films had a better blood compatibility.

scholarly journals Structural differences between Sb- and Nb-doped tin oxides and consequences for electrical conductivity

2016 ◽  
Vol 40 (3) ◽  
pp. 2655-2660 ◽  
Author(s):  
Emma Oakton ◽  
Jérémy Tillier ◽  
Georges Siddiqi ◽  
Zlatko Mickovic ◽  
Olha Sereda ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Tin Oxides ◽  
Structural Differences ◽  
Co Precipitation

High surface area Nb and Sb-doped tin oxides are prepared by co-precipitation. The differences in conductivity are rationalised using HT-XRD, SSNMR and Nb K-edge XANES characterisation.

Electrical Properties of Y0.06Sr0.94Ti0.6Fe0.4O3-δ-YSZ Composites as Electrode Materials

2016 ◽  
Vol 697 ◽  
pp. 327-330 ◽  
Author(s):  
Ke Shan ◽  
Xing Min Guo ◽  
Feng Rui Zhai ◽  
Zhong Zhou Yi
Keyword(s):  
Electrical Conductivity ◽  
Electrode Materials ◽  
Electronic Conductivity ◽  
Ionic Conductivities ◽  
Conductivity Measurement ◽  
Transference Numbers ◽  
Secondary Phases ◽  
Electrical Conductivity Measurement ◽  
Total Electrical Conductivity ◽  
Phase Compatibility

Y0.06Sr0.94Ti0.6Fe0.4O3-δ-YSZ composites were prepared by mixing Y, Fe co-doped SrTiO3 (Y0.06Sr0.94Ti0.6Fe0.4O3-δ known as YSTF) and 8 mol% Y2O3 stabilized ZrO2 (YSZ) in different weight fractions. The phase stability, phase compatibility, microstructure and mixed ionic-electronic conductivity of composites were investigated. Phase analysis by XRD showed no clearly detectable secondary phases. The electrical conductivity measurement on the YSTF-YSZ composites showed a drastic decrease in total electrical and ionic conductivities when more than 10 wt% of YSZ was used in the composites. The total electrical conductivity was 0.102 S/cm for Y0.06Sr0.94Ti0.6Fe0.4O3-δ and 0.043 S/cm for YSTF-20YSZ at 700 oC, respectively. The value at 700 oC is approximately 2.4 times higher than that of YSTF-20YSZ. The ionic conductivity of Y0.06Sr0.94Ti0.8Fe0.2O3-δ varies from 0.015S/cm at 700 oC to 0.02 S/cm at 800 oC, respectively. The value at 800°C is approximately 12.5 times higher than YSTF-20YSZ. The ion transference numbers of YSTF-YSZ composites vary from 0.14 to 0.28 at 800 °C.

Joining of Ti3SiC2 with Ti–6Al–4V Alloy

2002 ◽  
Vol 17 (1) ◽  
pp. 52-59 ◽  
Author(s):  
N.F. Gao ◽  
Y. Miyamoto
Keyword(s):  
Solid State ◽  
Rate Constant ◽  
Liquid State ◽  
Parabolic Rate Constant ◽  
Diffusion Path ◽  
Solid State Diffusion ◽  
Diffusion Controlled ◽  
State Diffusion ◽  
Rate Controlled ◽  
Higher Temperature

The joining of a Ti3SiC2 ceramic with a Ti–6Al–4V alloy was carried out at the temperature range of 1200–1400 °C for 15 min to 4 h in a vacuum. The total diffusion path of joining was determined to be Ti3SiC2/Ti5Si3Cx/Ti5Si3Cx + TiCx/TiCx/Ti. The reaction was rate controlled by the solid-state diffusion below 1350 °C and turned to the liquid-state diffusion controlled with a dramatic increase of parabolic rate constant Kp when the temperature exceeded 1350 °C. The TiCx tended to grow at the boundarywith the Ti–6Al–4V alloy at a higher temperature and longer holding time. TheTi3SiC2/Ti–6Al–4V joint is expected to be applied to implant materials.

Novel Fe3O4/HNT@rGO composite via a facile co-precipitation method for the removal of contaminants from aqueous system

RSC Advances ◽  
2016 ◽  
Vol 6 (54) ◽  
pp. 49228-49235 ◽  
Author(s):  
Chengwei Gao ◽  
Baojun Li ◽  
Ning Chen ◽  
Jie Ding ◽  
Qiang Cai ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Water Treatment ◽  
Potential Application ◽  
High Performance ◽  
Aqueous System ◽  
Precipitation Method ◽  
Precipitation Process ◽  
System P ◽  
Removal Of Contaminants ◽  
Co Precipitation

Fe3O4/HNT@rGO composite (FHGC) was fabricated via a facile co-precipitation process, followed by heat treatment. For RhB and As5+removal, the high performance and easy separation of FHGC highlight its potential application in water treatment.

Structural and Optical Properties of F-Doped ZnO Nanoparticles Synthesized by Co-Precipitation Process

2016 ◽  
Vol 675-676 ◽  
pp. 69-72
Author(s):  
Krisana Chongsri ◽  
Wanichaya Mekprasart ◽  
Wisanu Pecharapa
Keyword(s):  
Zno Nanoparticles ◽  
Fluoride Concentration ◽  
Precursor Solution ◽  
Hexagonal Wurtzite Structure ◽  
Ammonium Fluoride ◽  
Zinc Nitrate ◽  
Precipitation Process ◽  
Vis Spectroscopy ◽  
Doped Zno ◽  
Co Precipitation

In this work, we reported the preparation of F-doped ZnO nanoparticles by facile precipitation process using zinc nitrate and ammonium fluoride as starting precursors for Zn and F, respectively dissolved in deionized water. The precursor solution was prepared at various fluoride composition ranging from 1-5 wt%. The as-precipitated powders were calcined at different temperature from 500 °C to 700 °C for 2 h. Effect of calcination temperature and fluoride concentration on structural, morphologies, optical and electrical properties were investigated by X-ray diffraction (XRD), scanning electron microscope (SEM), UV-Vis spectroscopy, respectively. XRD results indicated the complete formation of hexagonal wurtzite structure of ZnO. SEM micrographs showed the agglomeration for each sample that noticeably influenced by fluoride content.

Sign in / Sign up

Export Citation Format

Share Document