Interaction between Graphene Oxide and the Mycelia of Morchella sextelata

NANO ◽  
2020 ◽  
Vol 15 (03) ◽  
pp. 2050035
Author(s):  
Renhao Tan ◽  
Jiwei Li ◽  
Li Zhou ◽  
Lu Zhou ◽  
Jia Lei ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Growth Process ◽  
Culture Media ◽  
Xps Analysis ◽  
Potential Harm ◽  
X Ray ◽  
Nitrogen Doped ◽  
Mda Content ◽  
High Level

Graphene oxide (GO) is expected to be harmful to the environment due to the toxicity. Accordingly, this work aimed to assess the potential harm of GO to the environment by investigating the toxicity of GO to the M. sextelata, and the effects of M. sextelata to GO. The dry weights, IR spectra, morphology, ultra-structures of mycelia, pH, conductivities of culture media, the activity of superoxide dismutase (SOD) and malondialdehyde (MDA) contents were measured to display the potential hazards of GO to M. sextelata. Then the Raman spectroscopy, dispersibility, and X-ray photoelectron spectroscopy (XPS) of GO were measured to show the effect of M. sextelata on GO. The results indicated that the lower GO concentrations promoted the growth of M. sextelata while the high level of GO inhibited the growth process of M. sextelata. After 7 d of culture, the effect was suppressive, with the biomass significantly reduced by 10.10%, the MDA content of G200 increased by 69.06%. GO nanosheets covered the surface of mycelia which caused change of the mycelial microstructures. Correspondingly, M. sextelata induces more defects in GO, accompanied by poor dispersion of GO in ethanol. Based on the XPS analysis, in the G10, G50 and G200 treatments, their atomic percentage of nitrogen in GO increased by 3.03%, 4.28% and 2.2%, respectively, and the atomic percentage of oxygen in GO reduced by 8.61%, 9.42% and 4.09%, respectively. The effect of mycelia on GO is mainly in deoxygenated and nitrogen-doped. We expected that the above results would provide a reference for the environmental hazard of GO.

Fabrication of Nickel Sulfide/Nitrogen-Doped Reduced Graphene Oxide Nanocomposite as Anode Material for Lithium-Ion Batteries and Its Electrochemical Performance

2020 ◽  
Vol 20 (11) ◽  
pp. 6782-6787
Author(s):  
Yeon-Ju Lee ◽  
Tae-Hyun Ha ◽  
Gyu-Bong Cho ◽  
Ki-Won Kim ◽  
Jou-Hyeon Ahn ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Lithium Ion ◽  
Treatment Method ◽  
Retention Capacity ◽  
Graphene Nanocomposites ◽  
X Ray ◽  
Nitrogen Doped ◽  
Reduced Graphene

In this study, NiS/graphene nanocomposites were synthesized by simple heat treatment method of three graphene materials (graphene oxide (GO), reduced graphene oxide (rGO) and nitrogen-doped graphene oxide (N-rGO)) and NiS precursor. The morphology and crystal structure of NiS/graphene nanocomposites were characterized using field emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. Electrochemical properties were also investigated. NiS/graphene nanocomposites homogeneously wrapped by graphene materials have been successfully manufactured. Among the three nanocomposites, NiS/N-rGO nanocomposite exhibited the highest initial and retention capacity in discharge, respectively, of 1240 mAh/g and 467 mAh/g up to 100 cycles at 0.5 C.

Fabrication and Electrochemical Performance of Nitrogen-Doped Graphene Synthesized by Hydrothermal Method

2014 ◽  
Vol 804 ◽  
pp. 35-38
Author(s):  
Sen Liang ◽  
Min Luo ◽  
Yuan Yun Dou ◽  
Lei Guo ◽  
Bin Liang ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Electrical Measurements ◽  
X Ray ◽  
Nitrogen Doped ◽  
Reduced Graphene ◽  
Nitrogen Doped Graphene ◽  
Doped Graphene ◽  
Nitrogen Substitution ◽  
Pyridinic N

In this study, nitrogen doped graphene (NG) was prepared by using hydrothermal treatment of graphene oxide (GO) and ethylene diamine (EDA). The surface chemistry of the reduced graphene oxide (rGO) and the NG was investigated by the X-ray photoelectron spectroscopy (XPS). The results revealed that there were four kinds of nitrogen substitution: pyrollic N, pyridinic N, graphitic N and C-NH2. Further, the electrical measurements illustrated that the NG had superior capacitive performance than that of the rGO. Specifically, the maximum specific capacitance of NG was 200.6 F/g due to the double-layer capacitive and pseudocapacitive effect from the nitrogen-doped graphene. In addition, the present studies showed that the EDA was not only choose as nitrogen doping source but also played a key role in reduction.

scholarly journals X-ray Photoelectron Spectroscopy Analysis of Chitosan–Graphene Oxide-Based Composite Thin Films for Potential Optical Sensing Applications

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 478
Author(s):  
Wan Mohd Ebtisyam Mustaqim Mohd Daniyal ◽  
Yap Wing Fen ◽  
Silvan Saleviter ◽  
Narong Chanlek ◽  
Hideki Nakajima ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Functional Group ◽  
Optical Sensing ◽  
Composite Thin Films ◽  
Cobalt Ions ◽  
X Ray ◽  
Sensing Applications

In this study, X-ray photoelectron spectroscopy (XPS) was used to study chitosan–graphene oxide (chitosan–GO) incorporated with 4-(2-pyridylazo)resorcinol (PAR) and cadmium sulfide quantum dot (CdS QD) composite thin films for the potential optical sensing of cobalt ions (Co2+). From the XPS results, it was confirmed that carbon, oxygen, and nitrogen elements existed on the PAR–chitosan–GO thin film, while for CdS QD–chitosan–GO, the existence of carbon, oxygen, cadmium, nitrogen, and sulfur were confirmed. Further deconvolution of each element using the Gaussian–Lorentzian curve fitting program revealed the sub-peak component of each element and hence the corresponding functional group was identified. Next, investigation using surface plasmon resonance (SPR) optical sensor proved that both chitosan–GO-based thin films were able to detect Co2+ as low as 0.01 ppm for both composite thin films, while the PAR had the higher binding affinity. The interaction of the Co2+ with the thin films was characterized again using XPS to confirm the functional group involved during the reaction. The XPS results proved that primary amino in the PAR–chitosan–GO thin film contributed more important role for the reaction with Co2+, as in agreement with the SPR results.

scholarly journals A Facile and Green Synthesis of a MoO2-Reduced Graphene Oxide Aerogel for Energy Storage Devices

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 594 ◽  
Author(s):  
Mara Serrapede ◽  
Marco Fontana ◽  
Arnaud Gigot ◽  
Marco Armandi ◽  
Glenda Biasotto ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Electrochemical Impedance ◽  
Chemical Reduction ◽  
Low Cost ◽  
Xps Analysis ◽  
3D Scaffold ◽  
Energy Storage Devices ◽  
Reduced Graphene

A simple, low cost, and “green” method of hydrothermal synthesis, based on the addition of l-ascorbic acid (l-AA) as a reducing agent, is presented in order to obtain reduced graphene oxide (rGO) and hybrid rGO-MoO2 aerogels for the fabrication of supercapacitors. The resulting high degree of chemical reduction of graphene oxide (GO), confirmed by X-Ray Photoelectron Spectroscopy (XPS) analysis, is shown to produce a better electrical double layer (EDL) capacitance, as shown by cyclic voltammetric (CV) measurements. Moreover, a good reduction yield of the carbonaceous 3D-scaffold seems to be achievable even when the precursor of molybdenum oxide is added to the pristine slurry in order to get the hybrid rGO-MoO2 compound. The pseudocapacitance contribution from the resulting embedded MoO2 microstructures, was then studied by means of CV and electrochemical impedance spectroscopy (EIS). The oxidation state of the molybdenum in the MoO2 particles embedded in the rGO aerogel was deeply studied by means of XPS analysis and valuable information on the electrochemical behavior, according to the involved redox reactions, was obtained. Finally, the increased stability of the aerogels prepared with l-AA, after charge-discharge cycling, was demonstrated and confirmed by means of Field Emission Scanning Electron Microscopy (FESEM) characterization.

X-Ray Photoelectron Spectroscopy Study on Reduction of Graphene Oxide with Hydrazine Hydrate

2011 ◽  
Vol 287-290 ◽  
pp. 539-543 ◽  
Author(s):  
Wen Shi Ma ◽  
Jun Wen Zhou ◽  
Xiao Dan Lin
Keyword(s):  
Graphene Oxide ◽  
Hydrazine Hydrate ◽  
Photoelectron Spectroscopy ◽  
Reduction Rate ◽  
Reduction Reaction ◽  
Chemical Compositions ◽  
Total Oxygen ◽  
Graphene Oxides ◽  
X Ray ◽  
Oxygen Groups

Graphene oxide was prepared through Hummers' method，then different reduced graphenes were prepared via reduction of graphene oxide with hydrazine hydrate for 1h、12h and 24h. X-ray photoelectron spectroscopy (XPS) was used for the characterization of graphene oxide and the reduced graphenes. The variation of the contents of carbon in carbon and oxygen functional groups and chemical compositions of graphene oxides were investigated through analysis the content of different carbon atoms in different reduced graphenes. The results showed that the reduction reaction was very fast in the first 1 h, the content of total oxygen bonded carbon atoms decreased from 83.6% to 22.1%, and then after the reduction rate became very slow. After 12h, the content of total oxygen bonded carbon atom is 19.56%, only 2.54% lower than that of 1h’s. At the same time, C-N was introduced in the graphene oxides; this increased the stereo-hindrance for hydrazine hydrate attacking the C-Oxygen groups, thus reduced the reduction rate. After reduction for 24h, there still exists 16.4% oxygen bonded carbon atoms and the total conversion ratio of graphene approaches 70%.

Formation of GaN Self-Organized Nanotips by Nanomasking Effect

2001 ◽  
Vol 707 ◽  
Author(s):  
Harumasa Yoshida ◽  
Tatsuhiro Urushido ◽  
Hideto Miyake ◽  
Kazumasa Hiramtsu
Keyword(s):  
Monte Carlo Simulation ◽  
Monte Carlo ◽  
Aspect Ratio ◽  
Formation Mechanism ◽  
High Aspect Ratio ◽  
Photoelectron Spectroscopy ◽  
Nanometer Scale ◽  
Xps Analysis ◽  
X Ray ◽  
Self Organized

ABSTRACTWe have successfully fabricated self-organized GaN nanotips by reactive ion etching using chlorine plasma, and have revealed the formation mechanism. Nanotips with a high density and a high aspect ratio have been formed after the etching. We deduce from X-ray photoelectron spectroscopy (XPS) analysis that the nanotip formation is attributed to nanometer-scale masks of SiO2 on GaN. The structures calculated by Monte Carlo simulation of our formation mechanism are very similar to the experimental nanotip structures.

Ternary Composite of Molybdenum Disulfide-Graphene Oxide-Polyaniline for Supercapacitor

2021 ◽  
Author(s):  
Ke Qu ◽  
Yuqi Bai ◽  
Miao Deng
Keyword(s):  
Graphene Oxide ◽  
Molybdenum Disulfide ◽  
Photoelectron Spectroscopy ◽  
Electrochemical Impedance ◽  
Light Emitting Diode ◽  
Rate Capability ◽  
Energy Storage And Conversion ◽  
Carbon Paper ◽  
Power Sources ◽  
X Ray

Abstract The ever-increasing need for small and lightweight power sources for use in portable or wearable electronic devices has spurred the development of supercapacitors as a promising energy storage and conversion system. In this work, a simple, facile and easy-to-practice method has been developed to employ carbon paper (CP) as the support to coat molybdenum disulfide (MoS2) and graphene oxide (GO), followed by electrodeposition of polyaniline (PANI) to render CP/MoS2-GO-PANI. The preparation parameters, such as amounts of MoS2, GO and number of aniline electropolymerization cycles, have been optimized to render CP/MoS2-GO-PANI the best capacitive performance. The as-prepared optimal CP/MoS2-GO-PANI is characterized by X-ray powder diffraction, scanning electron microscopy, energy-dispersive spectroscopy, and X-ray photoelectron spectroscopy. The supercapacitive properties of CP/MoS2-GO-PANI as an electrode have been evaluated electrochemically via cyclic voltammetry, galvanostatic charge/discharge, and electrochemical impedance spectroscopy testing. CP/MoS2-GO-PANI delivers a specific capacitance of 255.1 F/g at 1.0 A/g and exhibits excellent rate capability under larger current densities. Moreover, a symmetrical supercapacitor is assembled and three are connected in series to power a light-emitting diode for ~15 minutes, demonstrating the promising application potential of CP/MoS2-GO-PANI-based supercapacitor.

Comparative Study of Time-Dependent PAES and XPS on a Ni/Pd Surface

2017 ◽  
Vol 373 ◽  
pp. 313-316 ◽  
Author(s):  
Samantha Zimnik ◽  
Christian Piochacz ◽  
Sebastian Vohburger ◽  
Christoph Hugenschmidt
Keyword(s):  
Photoelectron Spectroscopy ◽  
Electron Spectroscopy ◽  
Auger Electron ◽  
Structural Changes ◽  
Time Dependent ◽  
Xps Analysis ◽  
Time Constants ◽  
X Ray ◽  
Residual Gas ◽  
Rule Out

We report on time-dependent Positron annihilation induced Auger Electron Spectroscopy (PAES) study on 0.5 monolayers (ML) Ni on polycrystalline Pd accompanied by complementary X-ray induced Photoelectron Spectroscopy (XPS). The normalized PAES spectra showed a significant decrease in the Ni intensity and an increase in the Pd intensity as a function of time. To rule out varying influence on the elements e.g. from surface contaminates due to the residual gas, a time-dependent XPS analysis was performed on pure Ni and Pd as well as to analyze the main contaminants C and O. The O fraction was found to be constant within the measurement time and the time constants for C significantly differ from those of Ni and Pd in the PAES data. Consequently, it was concluded that the PAES data show a superposition of C contamination and structural changes at the surface of Ni/Pd.

Xps Analysis of the Sapphire Surface as a Function of High Temperature Vacuum Annealing

1989 ◽  
Vol 159 ◽  
Author(s):  
E.D. Richmond
Keyword(s):  
High Temperature ◽  
Binding Energy ◽  
Photoelectron Spectroscopy ◽  
Vacuum Annealing ◽  
Xps Analysis ◽  
Chemical Changes ◽  
Cleaning Procedure ◽  
Sapphire Surface ◽  
X Ray ◽  
First Time

ABSTRACTFor the first time the (1102) surface of sapphire has been investigated by X-ray photoelectron spectroscopy to ascertain chemical changes resulting from annealing in vacuum at 1300° C and 1450° C. As received substrates had a substantial surface C contaminant. For substrates that were chemically cleaned before inserting them into the MBE system no trace of carbon is detected. A residual flourine contaminant results from the cleaning procedure and is desorbed by the vacuum annealing. Spectra of annealed substrates are compared to the unannealed chemically cleaned substrates. The annealed substrates exhibit 0.4 to 0.5 eV shift to higher binding energy of the Al peak and a 0.3 eV shift to higher binding energy of the O peak. In addition, a 2% depletion of oxygen from the surface occurs.

Characterization of X-ray irradiated graphene oxide coatings using X-ray diffraction, X-ray photoelectron spectroscopy, and atomic force microscopy

2013 ◽  
Vol 28 (2) ◽  
pp. 68-71 ◽  
Author(s):  
Thomas N. Blanton ◽  
Debasis Majumdar
Keyword(s):  
Atomic Force Microscopy ◽  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
High Energy ◽  
X Ray Diffraction ◽  
Carbon Phase ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Before And After

In an effort to study an alternative approach to make graphene from graphene oxide (GO), exposure of GO to high-energy X-ray radiation has been performed. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) have been used to characterize GO before and after irradiation. Results indicate that GO exposed to high-energy radiation is converted to an amorphous carbon phase that is conductive.

Sign in / Sign up

Export Citation Format

Share Document