NiCo2S4/S Composites Used as Cathode Materials in Lithium-Sulfur Batteries with High Performance

NANO ◽  
2021 ◽  
pp. 2150029
Author(s):  
Qian Zhang ◽  
Renxia Zhu ◽  
Chenyu Zhao ◽  
Runze Fan ◽  
Yong Zhang ◽  
...  
Keyword(s):  
High Performance ◽  
High Current Density ◽  
Coulombic Efficiency ◽  
Specific Capacity ◽  
Volumetric Strain ◽  
Electrochemical Performances ◽  
Discharge Process ◽  
Strong Adsorption ◽  
Lithium Sulfur Batteries ◽  
Lithium Sulfur

Application of lithium-sulfur battery has been limited due to polysulfide dissolution, the insulating nature of sulfur and the volumetric strain produced during charge and discharge process. To improve the performance of Li-S batteries, two kinds of bimetallic sulfides of NiCo2S4 with flaky (F-NiCo2S4) and sea urchin-like (S-NiCo2S4) structures were synthesized by using simple hydrothermal method, which were used as sulfur carriers in lithium-sulfur batteries and showed excellent electrochemical properties. At 0.2[Formula: see text]C, both electrodes of F-NiCo2S4/S and S-NiCo2S4/S have high pristine discharge specific capacities of 986[Formula: see text]mAh[Formula: see text]g[Formula: see text] and 959[Formula: see text]mAh[Formula: see text]g[Formula: see text]. At high current density of 4[Formula: see text]C, the F-NiCo2S4/S electrode still has a high pristine discharge specific capacity of 673[Formula: see text]mAh[Formula: see text]g[Formula: see text] and a coulombic efficiency of 97.00%. The specific capacity can remain at 526[Formula: see text]mAh[Formula: see text]g[Formula: see text] with a low average attenuation of 0.17% even after 130 cycles. The excellent electrochemical performances of the cathode material can be ascribed to the synergistic effect of tubular morphology, good electrical conductivity and strong adsorption ability of NiCo2S4 matrix for polysulfide. The job provides a new scheme and material for application of lithium-sulfur batteries with high performance.

scholarly journals High-Performance Lithium Sulfur Batteries Based on Multidimensional Graphene-CNT-Nanosulfur Hybrid Cathodes

Batteries ◽  
2021 ◽  
Vol 7 (2) ◽  
pp. 26
Author(s):  
Álvaro Doñoro ◽  
Álvaro Muñoz-Mauricio ◽  
Vinodkumar Etacheri
Keyword(s):  
High Performance ◽  
Coulombic Efficiency ◽  
Electronic Conductivity ◽  
Specific Capacity ◽  
Synthesis Method ◽  
Graphene Nanoplatelets ◽  
Practical Implementation ◽  
Electrochemical Performances ◽  
High Electronic Conductivity ◽  
Lithium Sulfur

Although lithium-sulfur (Li-S) batteries are one of the promising candidates for next-generation energy storage, their practical implementation is limited by rapid capacity fading due to lithium polysulfide (LiPSs) formation and the low electronic conductivity of sulfur. Herein, we report a high-performance lithium-sulfur battery based on multidimensional cathode architecture consisting of nanosulfur, graphene nanoplatelets (2D) and multiwalled carbon nanotubes (1D). The ultrasonic synthesis method results in the generation of sulfur nanoparticles and their intercalation into the multilayered graphene nanoplatelets. The optimized multidimensional graphene-sulfur-CNT hybrid cathode (GNS58-CNT10) demonstrated a high specific capacity (1067 mAh g−1 @ 50 mA g−1), rate performance (539 @ 1 A g−1), coulombic efficiency (~95%) and cycling stability (726 mAh g−1 after 100 cycles @ 200 mA g−1) compared to the reference cathode. Superior electrochemical performances are credited to the encapsulation of nanosulfur between the individual layers of graphene nanoplatelets with high electronic conductivity, and effective polysulfide trapping by MWCNT bundles.

scholarly journals Three-Dimensionally Ordered Macro/Mesoporous Nb2O5/Nb4N5 Heterostructure as Sulfur Host for High-Performance Lithium/Sulfur Batteries

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1531
Author(s):  
Haoxian Chen ◽  
Jiayi Wang ◽  
Yan Zhao ◽  
Qindan Zeng ◽  
Guofu Zhou ◽  
...  
Keyword(s):  
Mass Transfer ◽  
High Performance ◽  
Discharge Process ◽  
Transformation Mechanism ◽  
Shuttle Effect ◽  
Strong Adsorption ◽  
Lithium Sulfur Batteries ◽  
Sulfur Host ◽  
Lithium Sulfur ◽  
Charge Discharge

The severe shuttle effect of soluble polysulfides hinders the development of lithium–sulfur batteries. Herein, we develop a three-dimensionally ordered macro/mesoporous (3DOM) Nb2O5/Nb4N5 heterostructure, which combines the strong adsorption of Nb2O5 and remarkable catalysis effect of Nb4N5 by the promotion “adsorption-transformation” mechanism in sulfur reaction. Furthermore, the high electrocatalytic activity of Nb4N5 facilitates ion/mass transfer during the charge/discharge process. As a result, cells with the S-Nb2O5/Nb4N5 electrode delivered outstanding cycling stability and higher discharge capacity than its counterparts. Our work demonstrates a new routine for the multifunctional sulfur host design, which offers great potential for commercial high-performance lithium–sulfur batteries.

scholarly journals Confine sulfur in double-hollow carbon sphere integrated with carbon nanotubes for advanced lithium–sulfur batteries

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Maru Dessie Walle ◽  
You-Nian Liu
Keyword(s):  
Carbon Nanotubes ◽  
Coulombic Efficiency ◽  
Specific Capacity ◽  
High Energy ◽  
High Energy Density ◽  
Carbon Sphere ◽  
Hollow Carbon Sphere ◽  
Lithium Sulfur Batteries ◽  
Hollow Carbon ◽  
Lithium Sulfur

AbstractThe lithium–sulfur (Li–S) batteries are promising because of the high energy density, low cost, and natural abundance of sulfur material. Li–S batteries have suffered from severe capacity fading and poor cyclability, resulting in low sulfur utilization. Herein, S-DHCS/CNTs are synthesized by integration of a double-hollow carbon sphere (DHCS) with carbon nanotubes (CNTs), and the addition of sulfur in DHCS by melt impregnations. The proposed S-DHCS/CNTs can effectively confine sulfur and physically suppress the diffusion of polysulfides within the double-hollow structures. CNTs act as a conductive agent. S-DHCS/CNTs maintain the volume variations and accommodate high sulfur content 73 wt%. The designed S-DHCS/CNTs electrode with high sulfur loading (3.3 mg cm−2) and high areal capacity (5.6 mAh mg cm−2) shows a high initial specific capacity of 1709 mAh g−1 and maintains a reversible capacity of 730 mAh g−1 after 48 cycles at 0.2 C with high coulombic efficiency (100%). This work offers a fascinating strategy to design carbon-based material for high-performance lithium–sulfur batteries.

Sulfurized Polyacrylonitrile for High-Performance Lithium Sulfur Batteries: Advances and Prospects

2021 ◽  
Author(s):  
Xiaohui Zhao ◽  
Chonglong Wang ◽  
Ziwei Li ◽  
Xuechun Hu ◽  
Amir A. Razzaq ◽  
...  
Keyword(s):  
Energy Density ◽  
High Performance ◽  
Specific Capacity ◽  
Rechargeable Batteries ◽  
Next Generation ◽  
Lithium Sulfur Batteries ◽  
Theoretical Specific Capacity ◽  
Lithium Sulfur

The lithium sulfur (Li-S) batteries have a high theoretical specific capacity (1675 mAh g-1) and energy density (2600 Wh kg-1), exerting a high perspective as the next-generation rechargeable batteries for...

scholarly journals Lamellar Polypyrene Based on Attapulgite–Sulfur Composite for Lithium–Sulfur Battery

Membranes ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 483
Author(s):  
Jing Wang ◽  
Riwei Xu ◽  
Chengzhong Wang ◽  
Jinping Xiong
Keyword(s):  
Cathode Material ◽  
Current Density ◽  
High Current Density ◽  
Specific Capacity ◽  
Lithium Sulfur Batteries ◽  
Rate Test ◽  
Sulfur Battery ◽  
Lower Capacity ◽  
Lithium Sulfur

We report on the preparation and characterization of a novel lamellar polypyrrole using an attapulgite–sulfur composite as a hard template. Pretreated attapulgite was utilized as the carrier of elemental sulfur and the attapulgite–sulfur–polypyrrole (AT @400 °C–S–PPy) composite with 50 wt.% sulfur was obtained. The structure and morphology of the composite were characterized with infrared spectroscopy (IR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). An AT @400 °C–S–PPy composite was further utilized as the cathode material for lithium–sulfur batteries. The first discharge specific capacity of this kind of battery reached 1175 mAh/g at a 0.1 C current rate and remained at 518 mAh/g after 100 cycles with capacity retention close to 44%. In the rate test, compared with the polypyrrole–sulfur (PPy–S) cathode material, the AT @400 °C–S–PPy cathode material showed lower capacity at a high current density, but it showed higher capacity when the current came back to a low current density, which was attributed to the “recycling” of pores and channels of attapulgite. Therefore, the lamellar composite with special pore structure has great value in improving the performance of lithium–sulfur batteries.

scholarly journals Fabrication of a Covalent Triazine Framework Functional Interlayer for High-Performance Lithium–Sulfur Batteries

Nanomaterials ◽  
2022 ◽  
Vol 12 (2) ◽  
pp. 255
Author(s):  
Ben Hu ◽  
Bing Ding ◽  
Chong Xu ◽  
Zengjie Fan ◽  
Derong Luo ◽  
...  
Keyword(s):  
Electronic Transport ◽  
High Performance ◽  
Capacity Fading ◽  
Transport Pathway ◽  
One Dimensional ◽  
Strong Adsorption ◽  
Lithium Sulfur Batteries ◽  
Covalent Triazine Framework ◽  
Adsorption Capability ◽  
Lithium Sulfur

The shuttling effect of polysulfides is one of the major problems of lithium–sulfur (Li–S) batteries, which causes rapid capacity fading during cycling. Modification of the commercial separator with a functional interlayer is an effective strategy to address this issue. Herein, we modified the commercial Celgard separator of Li–S batteries with one-dimensional (1D) covalent triazine framework (CTF) and a carbon nanotube (CNT) composite as a functional interlayer. The intertwined CTF/CNT can provide a fast lithium ionic/electronic transport pathway and strong adsorption capability towards polysulfides. The Li–S batteries with the CTF/CNT/Celgard separator delivered a high initial capacity of 1314 mAh g−1 at 0.1 C and remained at 684 mAh g−1 after 400 cycles−1 at 1 C. Theoretical calculation and static-adsorption experiments indicated that the triazine ring in the CTF skeleton possessed strong adsorption capability towards polysulfides. The work described here demonstrates the potential for CTF-based permselective membranes as separators in Li–S batteries.

scholarly journals MnO2/rGO/CNTs Framework as a Sulfur Host for High-Performance Li-S Batteries

Molecules ◽  
2020 ◽  
Vol 25 (8) ◽  
pp. 1989 ◽  
Author(s):  
Wei Dong ◽  
Lingqiang Meng ◽  
Xiaodong Hong ◽  
Sizhe Liu ◽  
Ding Shen ◽  
...  
Keyword(s):  
High Performance ◽  
Physical Adsorption ◽  
Rapid Development ◽  
Electronic Conductivity ◽  
Specific Capacity ◽  
Framework Structure ◽  
Shuttle Effect ◽  
Lithium Sulfur Batteries ◽  
Lithium Sulfur ◽  
Initial Capacity

Lithium-sulfur batteries are very promising next-generation energy storage batteries due to their high theoretical specific capacity. However, the shuttle effect of lithium-sulfur batteries is one of the important bottlenecks that limits its rapid development. Herein, physical and chemical dual adsorption of lithium polysulfides are achieved by designing a novel framework structure consisting of MnO2, reduced graphene oxide (rGO), and carbon nanotubes (CNTs). The framework-structure composite of MnO2/rGO/CNTs is prepared by a simple hydrothermal method. The framework exhibits a uniform and abundant mesoporous structure (concentrating in ~12 nm). MnO2 is an α phase structure and the α-MnO2 also has a significant effect on the adsorption of lithium polysulfides. The rGO and CNTs provide a good physical adsorption interaction and good electronic conductivity for the dissolved polysulfides. As a result, the MnO2/rGO/CNTs/S cathode delivered a high initial capacity of 1201 mAh g−1 at 0.2 C. The average capacities were 916 mAh g−1, 736 mAh g−1, and 547 mAh g−1 at the current densities of 0.5 C, 1 C, and 2 C, respectively. In addition, when tested at 0.5 C, the MnO2/rGO/CNTs/S exhibited a high initial capacity of 1010 mAh g−1 and achieved 780 mAh g−1 after 200 cycles, with a low capacity decay rate of 0.11% per cycle. This framework-structure composite provides a simple way to improve the electrochemical performance of Li-S batteries.

Fabrication of layered Ti3C2 with an accordion-like structure as a potential cathode material for high performance lithium–sulfur batteries

2015 ◽  
Vol 3 (15) ◽  
pp. 7870-7876 ◽  
Author(s):  
Xiaoqin Zhao ◽  
Min Liu ◽  
Yong Chen ◽  
Bo Hou ◽  
Na Zhang ◽  
...  
Keyword(s):  
Cathode Material ◽  
Discharge Capacity ◽  
High Performance ◽  
Coulombic Efficiency ◽  
Initial Discharge Capacity ◽  
Capacity Retention ◽  
Initial Discharge ◽  
Lithium Sulfur Batteries ◽  
Lithium Sulfur

L-Ti3C2 was prepared by exfoliating Ti3AlC2 in 40% HF. With sulfur-loaded L-Ti3C2 as cathodes, Li–S batteries deliver a high initial discharge capacity of 1291 mA h g−1, an excellent capacity retention of 970 mA h g−1 and coulombic efficiency of 99% after 100 cycles.

Graphene oxide-polypyrrole composite as sulfur hosts for high-performance lithium-sulfur batteries

2018 ◽  
Vol 11 (06) ◽  
pp. 1840007 ◽  
Author(s):  
Qian Wang ◽  
Chengkai Yang ◽  
Hui Tang ◽  
Kai Wu ◽  
Henghui Zhou
Keyword(s):  
Graphene Oxide ◽  
High Performance ◽  
Density Functional ◽  
Specific Capacity ◽  
High Energy ◽  
High Energy Density ◽  
Composite Cathodes ◽  
Lithium Sulfur Batteries ◽  
Lithium Sulfur ◽  
Capacity Decay

Lithium-sulfur batteries are considered as a promising candidate for the next-generation high energy density storage devices. However, they are still hindered by serious capacity decay on cycling caused by the dissolution of redox intermediates. Here, we designed a unique structure with polypyrrole (ppy) inserting into the graphene oxide (GO) sheet for accommodating sulfur. Such a sulfur host not only exhibits a good electronic and ionic conductivity, but also can suppress polysulfide dissolution effectively. With this advanced design, the composite cathode showed a high specific capacity of 548.4[Formula: see text]mA[Formula: see text]h[Formula: see text]g[Formula: see text] at 5.0 C. A stable Coulombic efficiency of [Formula: see text]99.5% and a capacity decay rate as low as 0.089% per cycle along with 300 cycles at 1.0 C were achieved for composite cathodes with 78[Formula: see text]wt.% of S. Besides, the interaction mechanism between PPy and lithium polysulfides (LPS) was investigated by density-functional theory (DFT), suggesting that only the polymerization of N atoms can bind strongly to Li ions of LPS rather than single N atoms. The 3D structure GO-PPy host with high conductivity and excellent trapping ability to LPS offered a viable strategy to design high-performance cathodes for Li–S batteries.

C–S@PANI composite with a polymer spherical network structure for high performance lithium–sulfur batteries

2016 ◽  
Vol 18 (1) ◽  
pp. 261-266 ◽  
Author(s):  
Junkai Wang ◽  
Kaiqiang Yue ◽  
Xiaodan Zhu ◽  
Kang L. Wang ◽  
Lianfeng Duan
Keyword(s):  
High Performance ◽  
Specific Capacity ◽  
3D Structure ◽  
Conductive Polymer ◽  
Cycling Performance ◽  
High Specific Capacity ◽  
Pani Composite ◽  
Lithium Sulfur Batteries ◽  
And Migration ◽  
Lithium Sulfur

C–S@PANI composite with conductive polymer spherical network was synthesized. Its 3D structure inhibits the dissolution and migration of polysulfides into electrolyte, delivering high specific capacity and a stable cycling performance.

Sign in / Sign up

Export Citation Format

Share Document