Stability Analysis of Spin-Torque Nano-oscillator in the Rotating Frame

SPIN ◽  
2019 ◽  
Vol 09 (03) ◽  
pp. 1950008
Author(s):  
HaoHsuan Chen ◽  
Lang Zeng ◽  
ChingMing Lee ◽  
Weisheng Zhao
Keyword(s):  
High Performance ◽  
Electrical Current ◽  
Nonstationary Process ◽  
Laboratory Frame ◽  
Spin Torque ◽  
Rotating Frame ◽  
Magnetization Dynamics ◽  
Applied Current ◽  
Frequency Tunability ◽  
Out Of Plane

Spin-torque nano-oscillators (STNOs) have become one of the emerging and novel microwave devices with the high performance and tunability of GHz range frequency. The nanopillar structure with an out-of-plane (OP) spin polarizer and an in-plane (IP) magnetized free layer (FL) has been considered as a good candidate for the STNOs. Using the local rotational coordinate transformation, a nonstationary process describing magnetization dynamics in the laboratory frame is therefore transformed into a stationary one in the rotating frame. In this way, the state phase diagram of this type of STNOs is well established as a function of an applied current and external field, which is also evidenced by the macrospin simulations. Also, we show that the frequency tunability of the STNOs through electrical current can be well elevated by applying a static magnetic field anti-parallel to the spin-polarizer vector.

Modeling of spin-torque driven magnetization dynamics in a spin-valve with combined in-plane and out-of-plane polarizers

2011 ◽  
Vol 99 (22) ◽  
pp. 222509 ◽  
Author(s):  
Zhiwei Hou ◽  
Zongzhi Zhang ◽  
Jianwei Zhang ◽  
Yaowen Liu
Keyword(s):  
Spin Valve ◽  
Spin Torque ◽  
Magnetization Dynamics ◽  
Out Of Plane

scholarly journals Effective Hamiltonian for silicene under arbitrary strain from multi-orbital basis

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Zhuo Bin Siu ◽  
Mansoor B. A. Jalil
Keyword(s):  
Tight Binding ◽  
Spin Torque ◽  
Spin Accumulation ◽  
Effective Hamiltonian ◽  
Fermi Surfaces ◽  
Orbital Basis ◽  
Lattice Symmetry ◽  
Out Of Plane ◽  
Coupling Parameters ◽  
Spin Orbit Interactions

AbstractA tight-binding (TB) Hamiltonian is derived for strained silicene from a multi-orbital basis. The derivation is based on the Slater–Koster coupling parameters between different orbitals across the silicene lattice and takes into account arbitrary distortion of the lattice under strain, as well as the first and second-order spin–orbit interactions (SOI). The breaking of the lattice symmetry reveals additional SOI terms which were previously neglected. As an exemplary application, we apply the linearized low-energy TB Hamiltonian to model the current-induced spin accumulation in strained silicene coupled to an in-plane magnetization. The interplay between symmetry-breaking and the additional SOI terms induces an out-of-plane spin accumulation. This spin accumulation remains unbalanced after summing over the Fermi surfaces of the occupied bands and the two valleys, and can thus be utilized for spin torque switching.

scholarly journals Route towards efficient magnetization reversal driven by voltage control of magnetic anisotropy

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Roxana-Alina One ◽  
Hélène Béa ◽  
Sever Mican ◽  
Marius Joldos ◽  
Pedro Brandão Veiga ◽  
...  
Keyword(s):  
Magnetic Anisotropy ◽  
Random Access ◽  
Low Power Consumption ◽  
Surface Anisotropy ◽  
Magnetization Dynamics ◽  
Storage Density ◽  
Switching Regime ◽  
Major Interest ◽  
Out Of Plane

AbstractThe voltage controlled magnetic anisotropy (VCMA) becomes a subject of major interest for spintronics due to its promising potential outcome: fast magnetization manipulation in magnetoresistive random access memories with enhanced storage density and very low power consumption. Using a macrospin approach, we carried out a thorough analysis of the role of the VCMA on the magnetization dynamics of nanostructures with out-of-plane magnetic anisotropy. Diagrams of the magnetization switching have been computed depending on the material and experiment parameters (surface anisotropy, Gilbert damping, duration/amplitude of electric and magnetic field pulses) thus allowing predictive sets of parameters for optimum switching experiments. Two characteristic times of the trajectory of the magnetization were analyzed analytically and numerically setting a lower limit for the duration of the pulses. An interesting switching regime has been identified where the precessional reversal of magnetization does not depend on the voltage pulse duration. This represents a promising path for the magnetization control by VCMA with enhanced versatility.

Electrostatic bellow muscle actuators and energy harvesters that stack up

2021 ◽  
Vol 6 (51) ◽  
pp. eaaz5796
Author(s):  
I. D. Sîrbu ◽  
G. Moretti ◽  
G. Bortolotti ◽  
M. Bolignari ◽  
S. Diré ◽  
...  
Keyword(s):  
High Performance ◽  
High Reliability ◽  
Low Cost ◽  
Artificial Muscle ◽  
Pressure Head ◽  
Robotic Systems ◽  
Maximum Pressure ◽  
Term Operation ◽  
Energy Harvesters ◽  
Out Of Plane

Future robotic systems will be pervasive technologies operating autonomously in unknown spaces that are shared with humans. Such complex interactions make it compulsory for them to be lightweight, soft, and efficient in a way to guarantee safety, robustness, and long-term operation. Such a set of qualities can be achieved using soft multipurpose systems that combine, integrate, and commute between conventional electromechanical and fluidic drives, as well as harvest energy during inactive actuation phases for increased energy efficiency. Here, we present an electrostatic actuator made of thin films and liquid dielectrics combined with rigid polymeric stiffening elements to form a circular electrostatic bellow muscle (EBM) unit capable of out-of-plane contraction. These units are easy to manufacture and can be arranged in arrays and stacks, which can be used as a contractile artificial muscle, as a pump for fluid-driven soft robots, or as an energy harvester. As an artificial muscle, EBMs of 20 to 40 millimeters in diameter can exert forces of up to 6 newtons, lift loads over a hundred times their own weight, and reach contractions of over 40% with strain rates over 1200% per second, with a bandwidth over 10 hertz. As a pump driver, these EBMs produce flow rates of up to 0.63 liters per minute and maximum pressure head of 6 kilopascals, whereas as generator, they reach a conversion efficiency close to 20%. The compact shape, low cost, simple assembling procedure, high reliability, and large contractions make the EBM a promising technology for high-performance robotic systems.

Mechanism of the Transition From In-Plane Buckling to Helical Buckling for a Stiff Nanowire on an Elastomeric Substrate

2016 ◽  
Vol 83 (4) ◽  
Author(s):  
Youlong Chen ◽  
Yong Zhu ◽  
Xi Chen ◽  
Yilun Liu
Keyword(s):  
High Performance ◽  
Three Dimensional ◽  
Stretchable Electronics ◽  
Buckling Mode ◽  
Design And Optimization ◽  
Out Of Plane ◽  
Plane Direction ◽  
Plane Displacement ◽  
Helical Buckling ◽  
Selection Of

In this work, the compressive buckling of a nanowire partially bonded to an elastomeric substrate is studied via finite-element method (FEM) simulations and experiments. The buckling profile of the nanowire can be divided into three regimes, i.e., the in-plane buckling, the disordered buckling in the out-of-plane direction, and the helical buckling, depending on the constraint density between the nanowire and the substrate. The selection of the buckling mode depends on the ratio d/h, where d is the distance between adjacent constraint points and h is the helical buckling spacing of a perfectly bonded nanowire. For d/h > 0.5, buckling is in-plane with wavelength λ = 2d. For 0.27 < d/h < 0.5, buckling is disordered with irregular out-of-plane displacement. While, for d/h < 0.27, buckling is helical and the buckling spacing gradually approaches to the theoretical value of a perfectly bonded nanowire. Generally, the in-plane buckling induces smaller strain in the nanowire, but consumes the largest space. Whereas the helical mode induces moderate strain in the nanowire, but takes the smallest space. The study may shed useful insights on the design and optimization of high-performance stretchable electronics and three-dimensional complex nanostructures.

scholarly journals Actuation Behavior of Multilayer Graphene Nanosheets/Polydimethylsiloxane Composite Films

Polymers ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1243 ◽  
Author(s):  
Chunmei Zhang ◽  
Tianliang Zhai ◽  
Chao Zhan ◽  
Qiuping Fu ◽  
Chao Ma
Keyword(s):  
Composite Film ◽  
High Performance ◽  
Graphene Nanosheets ◽  
Composite Films ◽  
Multilayer Graphene ◽  
Layer By Layer ◽  
Pdms Film ◽  
Out Of Plane ◽  
Dielectric Actuation ◽  
Electromechanical Actuation

The graphene nanosheets (GNS)/polydimethylsiloxane (PDMS) composite films with out-of-plane dielectric actuation behavior were prepared through a layer-by-layer spin coating process. The GNS-PDMS/PDMS composite films with 1~3 layers of GNS-PDMS films were spin coated on top of the PDMS film. The dielectric, mechanical, and electromechanical actuation properties of the composite films were investigated. The dielectric constant of the GNS-PDMS3/PDMS composite film at 1 kHz is 5.52, which is 1.7 times that of the GNS-PDMS1/PDMS composite film. The actuated displacement of the GNS-PDMS/PDMS composite films is greatly enhanced by increasing the number of GNS-PDMS layers. This study provides a novel alternative approach for fabricating high-performance actuators with out-of-plane actuation behavior.

SNR Improvement of Envelope Demodulation Using Two Temporal Magnetization Dynamics From Dual-Spin-Torque Oscillator

2018 ◽  
Vol 54 (11) ◽  
pp. 1-4 ◽  
Author(s):  
Y. Nakamura ◽  
M. Nishikawa ◽  
H. Osawa ◽  
Y. Okamoto ◽  
T. Kanao ◽  
...  
Keyword(s):  
Spin Torque ◽  
Magnetization Dynamics ◽  
Snr Improvement

Precession frequency and fast switching dependence on the in-plane and out-of-plane dual spin-torque polarizers

2012 ◽  
Vol 100 (14) ◽  
pp. 142409 ◽  
Author(s):  
Hong Zhang ◽  
Zhiwei Hou ◽  
Jianwei Zhang ◽  
Zongzhi Zhang ◽  
Yaowen Liu
Keyword(s):  
Precession Frequency ◽  
Spin Torque ◽  
Fast Switching ◽  
Out Of Plane

scholarly journals Magnetization Dynamics in a Perpendicular Anisotropy Free Layer under a Spin Torque Effect with Crossed Polarization

2020 ◽  
Vol 25 (1) ◽  
pp. 54
Author(s):  
Nafeesa Rahman ◽  
Rachid Sbiaa
Keyword(s):  
Tunnel Junction ◽  
Magnetic Tunnel Junction ◽  
Film Plane ◽  
Spin Torque ◽  
Spin Angular Momentum ◽  
Perpendicular Anisotropy ◽  
Free Layer ◽  
Magnetization Dynamics ◽  
Magnetization Direction ◽  
Spin Polarized

The transfer of spin angular momentum from a spin polarized current provides an efficient way of reversing the magnetization direction of the free layer of the magnetic tunnel junction (MTJ), and while faster reversal will reduce the switching energy, this in turn will lead to low power consumption. In this work, we propose a design where a spin torque oscillator (STO) is integrated with a conventional magnetic tunnel junction (MTJ) which will assist in the ultrafast reversal of the magnetization of the free layer of the MTJ. The structure formed (MTJ stacked with STO), will have the free layer of the MTJ sandwiched between two spin polarizer layers, one with a fixed magnetization direction perpendicular to film plane (main static polarizer) and the other with an oscillatory magnetization (dynamic polarizer). The static polarizer is the fixed layer of the MTJ itself and the dynamic polarizer is the free layer of the STO.

Sign in / Sign up

Export Citation Format

Share Document