Sinking Failure of Drag Embedment Anchors Due to Wave-Induced Seabed Liquefaction

2018 ◽  
Vol 01 (04) ◽  
pp. 1850006
Author(s):  
V. S. Ozgur Kirca ◽  
B. Mutlu Sumer
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Grain Size ◽  
Relative Density ◽  
Parametric Study ◽  
Soil Depth ◽  
Real Life ◽  
Wave Induced ◽  
The Mathematical Model ◽  
O 10

This paper presents the results of an integrated mathematical modeling exercise for sinking of Drag Embedment Anchors (DEA) in a seabed liquefied by waves. The mathematical model consists of three elements (sub-models): (1) Mathematical model for residual liquefaction under waves; (2) Mathematical model for sinking of DEAs in the liquefied soil; and (3) Mathematical model for upward progression of compaction front in the post-liquefaction stage. The study demonstrates the implementation of the model with reference to a selected group of real-life DEAs. The results generally show that the ultimate sinking depths of DEAs are rather large (tens of centimeters short of the liquefaction depth), and accordingly, the ultimate sinking times of DEAs are rather small (O(10[Formula: see text]min)) as a result of the massive weights of these anchors. The paper presents a parametric study carried out in a systematic way to understand the influence of parameters such as the relative density of soil, the soil depth, and the grain size on the end results.

scholarly journals Mathematical modeling of emergency situations at objects of production and gas transportation

2018 ◽  
Vol 251 ◽  
pp. 04012 ◽  
Author(s):  
Victor Orlov ◽  
Elena Detina ◽  
Oleg Kovalchuk
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Life Cycle ◽  
Real Life ◽  
Functional Safety ◽  
Emergency Situations ◽  
Managerial Decisions ◽  
Management Of Resources ◽  
Rational Management ◽  
The Mathematical Model

Mathematical modeling attracts the attention of researchers from different fields, as one of the rigorous methods of justifying the conducted researchs. Mathematical modeling makes it possible forecast to real life situations. Based on the mathematical model, the work provides the innovative recommendations for making managerial decisions on increasing the reliability and functional safety of the pipeline at all stages of its life cycle. The results obtained allow: 1) to consider issues related to the rational management of resources for the maintenance of the infrastructure of gas chemical complexes in conditions of limited means; 2) is have adapt RAMS methodology to the complex of Russian standards and the base of normative and methodological documentation on managing the life cycle processes of systems of to product and transportat of gas.

scholarly journals A Pot-Like Vibrational Microfluidic Rotational Motor

Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 177
Author(s):  
Suzana Uran ◽  
Matjaž Malok ◽  
Božidar Bratina ◽  
Riko Šafarič
Keyword(s):  
Mathematical Model ◽  
Rotational Speed ◽  
Mechanical Energy ◽  
Real Life ◽  
Frequency Region ◽  
Theoretical Research ◽  
Practical Challenge ◽  
The Mathematical Model ◽  
Motor Structure ◽  
Proper Balance

Constructing a micro-sized microfluidic motor always involves the problem of how to transfer the mechanical energy out of the motor. The paper presents several experiments with pot-like microfluidic rotational motor structures driven by two perpendicular sine and cosine vibrations with amplitudes around 10 μm in the frequency region from 200 Hz to 500 Hz. The extensive theoretical research based on the mathematical model of the liquid streaming in a pot-like structure was the base for the successful real-life laboratory application of a microfluidic rotational motor. The final microfluidic motor structure allowed transferring the rotational mechanical energy out of the motor with a central axis. The main practical challenge of the research was to find the proper balance between the torque, due to friction in the bearings and the motor’s maximal torque. The presented motor, with sizes 1 mm by 0.6 mm, reached the maximal rotational speed in both directions between −15 rad/s to +14 rad/s, with the estimated maximal torque of 0.1 pNm. The measured frequency characteristics of vibration amplitudes and phase angle between the directions of both vibrational amplitudes and rotational speed of the motor rotor against frequency of vibrations, allowed us to understand how to build the pot-like microfluidic rotational motor.

Methods of Mathematical Modeling of the Leaching Process of Cobalt-Containing Solutions

2021 ◽  
Vol 316 ◽  
pp. 661-666
Author(s):  
Nataliya V. Mokrova
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Chemical Kinetics ◽  
Group Method ◽  
Data Handling ◽  
Multistage Processes ◽  
Leaching Process ◽  
Proposed Model ◽  
Simulation Results ◽  
The Mathematical Model

Current cobalt processing practices are described. This article discusses the advantages of the group argument accounting method for mathematical modeling of the leaching process of cobalt solutions. Identification of the mathematical model of the cascade of reactors of cobalt-producing is presented. Group method of data handling is allowing: to eliminate the need to calculate quantities of chemical kinetics; to get the opportunity to take into account the results of mixed experiments; to exclude the influence of random interference on the simulation results. The proposed model confirms the capabilities of the group method of data handling for describing multistage processes.

A prey–predator model and control of a nematodes pest using control in banana: Mathematical modeling and qualitative analysis

2021 ◽  
pp. 2150089
Author(s):  
Sudhakar Yadav ◽  
Vivek Kumar
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Local Stability ◽  
Detection Method ◽  
Initial Release ◽  
Pest Detection ◽  
Predator Model ◽  
And Control ◽  
The Mathematical Model ◽  
Theoretical Results

This study develops a mathematical model for describing the dynamics of the banana-nematodes and its pest detection method to help banana farmers. Two criteria: the mathematical model and the type of nematodes pest control system are discussed. The sensitivity analysis, local stability, global stability, and the dynamic behavior of the mathematical model are performed. Further, we also develop and discuss the optimal control mathematical model. This mathematical model represents various modes of management, including the initial release of infected predators as well as the destroying of nematodes. The theoretical results are shown and verified by numerical simulations.

scholarly journals Population Behavior in the Mathematical Model of the Spread of COVID19 Type SEIRS

2021 ◽  
Vol 6 (2) ◽  
pp. 83-88
Author(s):  
Asmaidi As Med ◽  
Resky Rusnanda
Keyword(s):  
Mathematical Modeling ◽  
Numerical Simulation ◽  
Mathematical Model ◽  
Everyday Life ◽  
Applied Mathematics ◽  
Living Things ◽  
Simulation Results ◽  
Parameter Values ◽  
The Mathematical Model ◽  
Disease Free

Mathematical modeling utilized to simplify real phenomena that occur in everyday life. Mathematical modeling is popular to modeling the case of the spread of disease in an area, the growth of living things, and social behavior in everyday life and so on. This type of research is included in the study of theoretical and applied mathematics. The research steps carried out include 1) constructing a mathematical model type SEIRS, 2) analysis on the SEIRS type mathematical model by using parameter values for conditions 1and , 3) Numerical simulation to see the behavior of the population in the model, and 4) to conclude the results of the numerical simulation of the SEIRS type mathematical model. The simulation results show that the model stabilized in disease free quilibrium for the condition  and stabilized in endemic equilibrium for the condition .

scholarly journals SIMULATION AND SENSITIVITY ANALYSIS ON THE PARAMETER OF NON-TARGETED IRRADIATION EFFECTS MODEL

2018 ◽  
Vol 81 (1) ◽  
Author(s):  
Muhamad Hanis Nasir ◽  
Fuaada Mohd Siam
Keyword(s):  
Mathematical Model ◽  
Sensitivity Analysis ◽  
Real Life ◽  
Double Strand Breaks ◽  
Signal Molecules ◽  
Danger Signal ◽  
Survival Fraction ◽  
Strand Breaks ◽  
Radiation Induced ◽  
The Mathematical Model

Real-life situations showed damage effects on non-targeted cells located in the vicinity of an irradiation region, due to danger signal molecules released by the targeted cells. This effect is widely known as radiation-induced bystander effects (RIBE). The purpose of this paper is to model the interaction of non-targeted cells towards bystander factors released by the irradiated cells by using a system of structured ordinary differential equations. The mathematical model and its simulations are presented in this paper. In the model, the cells are grouped based on the number of double-strand breaks (DSBs) and mis-repair DSBs because the DSBs are formed in non-targeted cells. After performing the model's simulations, the analysis continued with sensitivity analysis. Sensitivity analysis will determine which parameter in the model is the most sensitive to the survival fraction of non-targeted cells. The proposed mathematical model can explain the survival fraction of non-targeted cells affected by the bystander factors.

scholarly journals Mathematical Modeling of Pollution Transfer in Open Channel

2019 ◽  
pp. 49-50
Author(s):  
Petro Martyniuk ◽  
Oksana Ostapchuk ◽  
Vitalii Nalyvaiko
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Numerical Solution ◽  
Boundary Problem ◽  
Water Flow ◽  
Numerical Experiments ◽  
Open Channel ◽  
Computational Algorithm ◽  
The Mathematical Model

The problem of pollution transfer by water flow in open channel was considered. The mathematical model of the problem was constructed. The numerical solution of the onedimensional boundary problem was obtained. The computational algorithm for solving the problem was programmed to implement. A series of numerical experiments with their further analysis was conducted.

scholarly journals THE MATHEMATICAL MODELING OF METALS CONTENT IN PEAT

2015 ◽  
Vol 1 ◽  
pp. 249
Author(s):  
Edmunds Teirumnieks ◽  
Ērika Teirumnieka ◽  
Ilmārs Kangro ◽  
Harijs Kalis
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Inductively Coupled Plasma ◽  
Optical Emission ◽  
Peat Bog ◽  
Inductively Coupled ◽  
Pollution Loading ◽  
The Mathematical Model ◽  
Optical Emission Spectrometer

Metals deposition in peat can aid to evaluate impact of atmospheric or wastewaters pollution and thus can be a good indicator of recent and historical changes in the pollution loading. For peat using in agriculture, industrial, heat production etc. knowledge of peat metals content is important. Experimental determination of metals in peat is very long and expensive work. Using experimental data the mathematical model for calculation of concentrations of metals in different points for different layers is developed. The values of the metals (Ca, Mg, Fe, Sr, Cu, Zn, Mn, Pb, Cr, Ni, Se, Co, Cd, V, Mo) concentrations in different layers in peat taken from Knavu peat bog from four sites are determined using inductively coupled plasma optical emission spectrometer. Mathematical model for calculation of concentrations of metal has been described in the paper. As an example, mathematical models for calculation of Pb concentrations have been analyzed.

scholarly journals Mathematical modeling and harmonic analysis of SISFCL

2017 ◽  
Vol 36 (1) ◽  
pp. 258-270
Author(s):  
Debraj Sarkar ◽  
Debabrata Roy ◽  
Amalendu Bikash Choudhury ◽  
Sotoshi Yamada
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Harmonic Analysis ◽  
Voltage Drop ◽  
Element Model ◽  
Iron Core ◽  
Content Type ◽  
Hysteresis Characteristic ◽  
The Core ◽  
The Mathematical Model

Purpose A saturated iron core superconducting fault current limiter (SISFCL) has an important role to play in the present-day power system, providing effective protection against electrical faults and thus ensuring an uninterrupted supply of electricity to the consumers. Previous mathematical models developed to describe the SISFCL use a simple flux density-magnetic field intensity curve representing the ferromagnetic core. As the magnetic state of the core affects the efficient working of the device, this paper aims to present a novel approach in the mathematical modeling of the device with the inclusion of hysteresis. Design/methodology/approach The Jiles–Atherton’s hysteresis model is utilized to develop the mathematical model of the limiter. The model is numerically solved using MATLAB. To support the validity of model, finite element model (FEM) with similar specifications was simulated. Findings Response of the limiter based on the developed mathematical model is in close agreement with the FEM simulations. To illustrate the effect of the hysteresis, the responses are compared by using three different hysteresis characteristics. Harmonic analysis is performed and comparison is carried out utilizing fast Fourier transform and continuous wavelet transform. It is observed that the core with narrower hysteresis characteristic not only produces a better current suppression but also creates a higher voltage drop across the DC source. It also injects more harmonics in the system under fault condition. Originality/value Inclusion of hysteresis in the mathematical model presents a more realistic approach in the transient analysis of the device. The paper provides an essential insight into the effect of the core hysteresis characteristic on the device performance.

Mathematical Modeling of Steppe Fires

2020 ◽  
pp. 48-62 ◽  
Author(s):  
Valeriy Afanasievich Perminov
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Wind Speed ◽  
Vegetation Cover ◽  
Meteorological Conditions ◽  
Condensed Phases ◽  
Pyrolysis Products ◽  
Rate Of Spread ◽  
The Mathematical Model ◽  
Steppe Fires

The chapter presents a mathematical model of the initiation and spread of the steppe fire. The mathematical model is based on the laws of mechanics of multiphase reacting media. The main physicochemical processes describing the drying, pyrolysis, and combustion of gaseous and condensed pyrolysis products are taken into account. As a result of the numerical solution, the distributions of the velocity, temperature, and concentration fields of the components of the gas and condensed phases were determined. The dependence of the rate of spread of the steppe fire on the main parameters of the state of vegetation cover and wind speed was studied. The mathematical model presented in the chapter can be used to predict the spread of steppe fires for various types of steppe vegetation and meteorological conditions, as well as for preventive measures.

Sign in / Sign up

Export Citation Format

Share Document