An efficient scheme for curve and surface construction based on a set of interpolatory basis functions

2011 ◽  
Vol 30 (2) ◽  
pp. 1-11 ◽  
Author(s):  
Ren-Jiang Zhang ◽  
Weiyin Ma
Keyword(s):  
Basis Functions ◽  
Efficient Scheme ◽  
Surface Construction

Development of the UHV-STM

1990 ◽  
Vol 48 (1) ◽  
pp. 322-323
Author(s):  
M. Iwatsuki ◽  
S. Kitamura ◽  
A. Mogami
Keyword(s):  
Surface Science ◽  
Real Space ◽  
Atomic Scale ◽  
Scanning Tunneling ◽  
Great Promise ◽  
Force Microscopy ◽  
Atomic Force ◽  
Stm Image ◽  
Surface Construction ◽  
Very High

Since Binnig, Rohrer and associates observed real-space topographic images of Si(111)-7×7 and invented the scanning tunneling microscope (STM),1) the STM has been accepted as a powerful surface science instrument.Recently, many application areas for the STM have been opened up, such as atomic force microscopy (AFM), magnetic force microscopy (MFM) and others. So, the STM technology holds a great promise for the future.The great advantages of the STM are its high spatial resolution in the lateral and vertical directions on the atomic scale. However, the STM has difficulty in identifying atomic images in a desired area because it uses piezoelectric (PZT) elements as a scanner.On the other hand, the demand to observe specimens under UHV condition has grown, along with the advent of the STM technology. The requirment of UHV-STM is especially very high in to study of surface construction of semiconductors and superconducting materials on the atomic scale. In order to improve the STM image quality by keeping the specimen and tip surfaces clean, we have built a new UHV-STM (JSTM-4000XV) system which is provided with other surface analysis capability.

Spectral analysis with a minimal basis functions approach for quantification of ligand-receptor dynamic PET study

2005 ◽  
Vol 25 (1_suppl) ◽  
pp. S634-S634 ◽  
Author(s):  
Yun Zhou ◽  
Weiguo Ye ◽  
James R Brasic ◽  
Mohab Alexander ◽  
John Hilton ◽  
...  
Keyword(s):  
Spectral Analysis ◽  
Basis Functions ◽  
Dynamic Pet ◽  
Minimal Basis

Material Identification in Presence of Metal for Baggage Screening

2020 ◽  
Vol 2020 (14) ◽  
pp. 294-1-294-8
Author(s):  
Sandamali Devadithya ◽  
David Castañón
Keyword(s):  
Atomic Number ◽  
Effective Atomic Number ◽  
Simulated Data ◽  
Dual Energy ◽  
Basis Functions ◽  
Total Variation Regularization ◽  
Ct Scanner ◽  
Edge Preserving ◽  
Baggage Screening ◽  
Dual Energy Imaging

Dual-energy imaging has emerged as a superior way to recognize materials in X-ray computed tomography. To estimate material properties such as effective atomic number and density, one often generates images in terms of basis functions. This requires decomposition of the dual-energy sinograms into basis sinograms, and subsequently reconstructing the basis images. However, the presence of metal can distort the reconstructed images. In this paper we investigate how photoelectric and Compton basis functions, and synthesized monochromatic basis (SMB) functions behave in the presence of metal and its effect on estimation of effective atomic number and density. Our results indicate that SMB functions, along with edge-preserving total variation regularization, show promise for improved material estimation in the presence of metal. The results are demonstrated using both simulated data as well as data collected from a dualenergy medical CT scanner.

Designing an Energy Efficient Scheme in MANET using Reconfigurable Directional (RDA) Algorithm

2018 ◽  
Vol 8 (4) ◽  
pp. 92
Author(s):  
Rinkle Chhabra ◽  
Anuradha Saini
Keyword(s):  
Ad Hoc ◽  
Energy Savings ◽  
Setup Time ◽  
Directional Antennas ◽  
Directional Antenna ◽  
Efficient Scheme ◽  
Primary Focus ◽  
Hoc Networks ◽  
Energy Gains ◽  
Insight Into

Mobile Ad Hoc Networks (MANET) are autonomous, infrastructure less and self-configuring networks. MANETs has gained lots of popularity due to on the fly deployment i.e. small network setup time and ability to provide communication in obstreperous terrains. Major challenges in MANETs include routing, energy efficiency, network topology control, security etc. Primary focus in this article is to provide method and algorithm to ensure significant energy savings using re-configurable directional antennas. Significant energy gains can be clinched using directional antenna. Key challenges while using directional antenna are to find destination location, antenna focusing, signal power and distance calculations. Re-configurable directional antenna can ensure significant energy gains if used intelligently. This article provides a brief insight into improved energy savings using re-configurable directional antennas and an associated algorithm

ON THE INTERACTION OF A VISCOELASTIC CYLINDRICAL PIPE WITH INNER UNIFORM COATING AND INSERTS WITH A COMPLEX PROFILE

2020 ◽  
Author(s):  
Kirill Kazakov
Keyword(s):  
Complex Shape ◽  
High Accuracy ◽  
Contact Stresses ◽  
Basis Functions ◽  
Complex Profile ◽  
Cylindrical Pipe ◽  
Interference Fit ◽  
Uniform Coating ◽  
Special Basis ◽  
Insert Region

This work is devoted to the formulation and construction of an analytical solution to the problem of contact between a cylindrical viscoelastic aging pipe with an internal thin coating and an insert having a complex shape placed inside the pipe with an interference fit. In practice, the presence of such coatings is required, for example, to protect the main structure from aggressive external or internal environments, for its electrical insulation, etc. The manufacturing process of the inner coating determines its possible heterogeneity (dependence of properties on coordinates). An insert placed inside a pipe can have a complex profile that has a rapidly changing function. Taking these features into account is important when analyzing the stress-strain state of pipes with an internal coating. Using an approach based on the use of special basis functions and the type of solution, a representation for the contact stresses in the pipe in the region of the rigid insert is obtained. This approach makes it possible to distinguish functions that describe the properties of the inner coating and the shape of the outer profile of the insert in the form of separate terms and factors in the expression for the contact stresses in the insert region. Therefore, in order to achieve high accuracy when carrying out calculations, it is sufficient to restrict ourselves to a relatively small number of terms

Sign in / Sign up

Export Citation Format

Share Document