scholarly journals Effect of Various Ring Yarns on Fabric Comfort

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Mukesh Kumar Singh ◽  
Akansha Nigam
Keyword(s):  
Thermal Conductivity ◽  
Free Space ◽  
Linear Density ◽  
Air Permeability ◽  
Vapour Permeability ◽  
Spun Yarns ◽  
Woven Structures ◽  
Body Level ◽  
Fabric Comfort ◽  
Moisture Vapour

Comfort performance of woven structures made of various types of ring spun yarns like carded, combed, and compact spun yarns has been reported in the present study. Carded, combed, and compact spun yarns are entirely different in structure in terms of fibre migration inside the yarn body, level of free space inside the yarn, number of hairs, and length of hairs on yarn surfaces. In this study, 197 dtex and 144 dtex (30s Ne and 40s Ne) ring spun combed yarns are used as a warp. The same cotton mixing was used to manufacture 30s Ne and 40s Ne carded, combed, and compact yarns. Both 30s and 40s Ne linear density yarns were prepared by all three carded, combed, and compact yarn manufacturing routes. The structure of fibre strand in filling yarn has a great impact on comfort related properties, that is, thermal conductivity, , air permeability, wicking, and moisture vapour permeability.

Optimization of Knitted Fabric Comfort and UV Protection using Desirability Function

2016 ◽  
Vol 11 (4) ◽  
pp. 155892501601100 ◽  
Author(s):  
Anindya Ghosh ◽  
Prithwiraj Mal ◽  
Abhijit Majumdar ◽  
Debmalya Banerjee
Keyword(s):  
Thermal Conductivity ◽  
Desirability Function ◽  
Air Permeability ◽  
Quality Parameters ◽  
Uv Protection ◽  
Knitted Fabric ◽  
Uv Resistance ◽  
Knitted Fabrics ◽  
Target Values ◽  
Fabric Comfort

The present study deals with the optimization of multiple quality parameters of single jersey and 1×1 rib knitted fabrics using the desirability function approach. Comfort properties such as air permeability, thermal conductivity and safety properties such as UV protection are combined to yield an ‘overall desirability’ varying from zero to one. The overall desirability has been maximized versus target values for air permeability, thermal conductivity and UV resistance. Experimental validation confirms that the proposed method can be used to design a knitted fabric with desired comfort and UV resistance characteristics.

Analysis of thermal comfort properties of jacquard knitted mattress ticking fabrics

2016 ◽  
Vol 28 (1) ◽  
pp. 105-114 ◽  
Author(s):  
Sena Terliksiz ◽  
Fatma Kalaoğlu ◽  
Selin Hanife Eryürük
Keyword(s):  
Thermal Conductivity ◽  
Sleep Quality ◽  
Thermal Comfort ◽  
Human Body ◽  
Air Permeability ◽  
Vapour Permeability ◽  
Content Type ◽  
Textile Materials ◽  
Sleep Environment ◽  
Comfort Parameters

Purpose – Sleep is a vital and a basic activity of human life and it is a physiological need for human body. Sleep quality is directly influenced by the comfort conditions of sleep environment. The purpose of this paper is to define the role of textile materials utilized as bed fabrics on air and mass transfer from the human body. Design/methodology/approach – Thermal conductivity, thermal resistance, thickness, water vapour permeability and air permeability properties of fabrics were analyzed and statistically evaluated. Thermal conductivity and resistance measurements were performed in Alambeta test instrument. Water vapour permeability tests were done according to the Rotating Platform method, and air permeability was measured in FX 3300 Textest air permeability tester. Relationships between comfort parameters were statistically evaluated with correlation analysis. Findings – Comfort is a major concept in the determination of overall life quality as well as sleep quality of a resting person. Therefore academic studies about thermal comfort prediction of sleep environment and bed surface fabrics are of great importance. This study investigates conventional mattress ticking fabrics in terms of comfort parameters and defines the important fabric properties on comfort parameters. Originality/value – Sleep comfort is a promising area in textile comfort studies with its dynamics different from body thermal comfort during daily life. However, in general comfort studies are about garment materials which are in direct contact with the skin. This study tries to define the comfort status of textile materials which have indirect contact with the human body surface during sleep duration.

Thermo-physiological properties of 3D spacer knitted fabrics

2016 ◽  
Vol 28 (3) ◽  
pp. 328-339 ◽  
Author(s):  
Rajesh Mishra ◽  
Arumugam Veerakumar ◽  
Jiri Militky
Keyword(s):  
Thermal Conductivity ◽  
Water Vapour ◽  
Air Permeability ◽  
Water Vapour Permeability ◽  
Knitted Fabrics ◽  
Vapour Permeability ◽  
Content Type ◽  
Spacer Fabric ◽  
Multifilament Yarns ◽  
Spacer Fabrics

Purpose – The purpose of this paper is to investigate effect of material properties in 3D knitted fabrics on thermo-physiological comfort. Design/methodology/approach – In the present study six different spacer fabrics were developed. Among these six fabrics, it was classified into two groups for convenient analysis of results, the first group has been developed using polyester/polypropylene blend with three different proportion and second group with polyester/polypropylene/lycra blend having another three different composition. As a spacer yarn, three different types of 88 dtex polyester monofilament yarn and polyester multifilament yarns (167 dtex and 14.5 tex) were used and 14.5 tex polypropylene and 44 dtex lycra multifilament yarns were also used for the face and back side of the spacer fabrics (Table I). These fabrics were developed in Syntax Pvt Ltd Czech Republic. Findings – The main influence on the water vapour permeability of warp knitted spacer fabrics is the kind of raw material, i.e. fibre wetting and wicking. Also there is no correlation between air permeability and water vapour permeability. It is found that both air permeability and thermal conductivity are closely related to the fabric density. It is also found that the fabric characteristics of spacer fabric show a very significant effect on the air permeability, thermal conductivity and mechanical properties of spacer fabric. Therefore, selection of spacer fabric for winter clothing according to its fabric characteristics. Practical implications – The main objective of the present study is to produce spacer knitted 3D fabrics suitable for defined climatic conditions to be used as clothing or in sports goods. Originality/value – New 3D knitted spacer fabrics can be produced with improved comfort properties.

scholarly journals Porosity and air permeability relationship of denim fabrics produced using core-spun yarns with different filament finenesses for filling

2019 ◽  
Vol 14 ◽  
pp. 155892501983781 ◽  
Author(s):  
Esin Sarıoğlu ◽  
Osman Babaarslan
Keyword(s):  
Linear Density ◽  
Total Porosity ◽  
Air Permeability ◽  
Control Group ◽  
Ring Spinning ◽  
Significance Level ◽  
Spun Yarns ◽  
Denim Fabric ◽  
Relationship Of ◽  
Core Part

In this article, porosity and air permeability of denim fabric produced from filament core-spun yarns with different filament fineness and yarn linear density were demonstrated. For this purpose, 110 dtex drawn textured polyester filaments with conventional, fine, and micro finenesses were used as core part, and combed cotton fiber was used as sheath part to obtain core-spun yarns with four different yarn linear density on a modified ring spinning system with the same spinning parameters. Besides the production of core-spun yarns, 100% cotton ring-spun yarns were produced as control group at the same conditions for each yarn linear density, as well. To evaluate the effect of filament fineness and yarn linear density on air permeability and total porosity, denim fabrics were obtained by using 24 yarn samples as weft at the same cover factor with four determined weft densities. Results showed that filament fineness and yarn linear density have a significant effect on total porosity and air permeability at a significance level of 0.05. In addition, high correlation (79.4%) between air permeability and total porosity of denim fabric samples was observed at a significance level of 0.01.

Evaluation of compression-recovery and thermal characteristics of multilayer bedding textiles

2020 ◽  
Vol 32 (5) ◽  
pp. 631-643
Author(s):  
Sedat Özer ◽  
Yaşar Erayman Yüksel ◽  
Yasemin Korkmaz
Keyword(s):  
Thermal Conductivity ◽  
Sleep Quality ◽  
Thermal Comfort ◽  
Sleep Duration ◽  
Human Body ◽  
Design Methodology ◽  
Thermal Characteristics ◽  
Air Permeability ◽  
Content Type ◽  
Thermal Comfort Properties

PurposeDesign of bedding textiles that contact the human body affects the sleep quality. Bedding textiles contribute to comfort sense during the sleep duration, in addition to ambient and bed microclimate. The purpose of this study is to evaluate the effects of different layer properties on the compression recovery and thermal characteristics of multilayer bedding textiles.Design/methodology/approachIn this study, woven and knitted multilayer bedding textiles were manufactured from fabric, fiber, sponge and interlining, respectively. Different sponge thickness, fiber and interlining weight were used in the layers of samples. Later, the pilling resistance, compression and recovery, air permeability and thermal conductivity of multilayer bedding textiles were investigated.FindingsThe results indicated that samples with the higher layer weight and thickness provide better compression recovery and lower air permeability properties. It was also found that knitted surfaces show the higher air permeability than the woven surfaces depending on the fabric porosity. Layer properties have insignificant effect on the thermal conductivity values.Originality/valueWhile researchers mostly focus on thermal comfort properties of garments, there are limited studies about comfort properties of bedding textiles in the literature. Furthermore, compression recovery properties of bedding textiles have also a great importance in terms of comfort. Originality of this study is that these properties were analyzed together.

scholarly journals Evaluation of Bed Cover Properties Produced from Double Fabric Based on Honeycomb

2015 ◽  
Vol 2015 ◽  
pp. 1-7
Author(s):  
A. A. Salama ◽  
A. S. El-Deeb ◽  
I. M. El-shahat
Keyword(s):  
Thermal Comfort ◽  
Water Vapour ◽  
Thermal Insulation ◽  
Abrasion Resistance ◽  
Air Permeability ◽  
Weft Yarn ◽  
Vapour Permeability ◽  
Geometrical Properties ◽  
Fabric Structure ◽  
Air Pockets

This research aims to innovate a new fabric structure, which could be used as a bed cover based on double honeycomb fabric with self-stitching. The honeycomb air pockets were aimed at facing each other to form closed small air chambers which work to sequester the air. The double fabric increases fabric thickness. Thus, the opportunity to improve thermal comfort could be achieved. A number of samples were produced with different densities and counts of weft yarn. Thermal insulation and water vapour permeability were measured and compared with bed covers produced from reversible weft backed structure. Geometrical properties, abrasion resistance, and air permeability were also measured. The results showed that the innovated structure had higher values of thermal insulation than reversible weft backed structure at certain weft counts and densities.

scholarly journals Hygrothermal simulation of building performance: data for Scottish masonry materials

2021 ◽  
Vol 54 (4) ◽  
Author(s):  
P. F. G. Banfill
Keyword(s):  
Thermal Conductivity ◽  
Water Vapour ◽  
Material Properties ◽  
Simulation Software ◽  
Water Vapour Permeability ◽  
High Porosity ◽  
Water Absorption Coefficient ◽  
Vapour Permeability ◽  
Hygrothermal Simulation ◽  
Current Production

AbstractRetrofitting thermal insulation to solid masonry walls alters their hygrothermal behaviour, which can be modelled by hygrothermal simulation software. However, such software needs values of key material properties to ensure satisfactory results and until now data has not been available for Scottish masonry buildings. This work aims to contribute to a Scotland-specific dataset of material properties for use by designers working on such buildings. Thermal conductivity, water vapour permeability, sorptivity, water absorption coefficient, hygroscopic sorption, density and porosity were all determined experimentally for selected historic and contemporary masonry materials. Within the range of materials tested three groups of materials properties emerge. Natural hydraulic lime mortars, hot-mixed quicklime mortar and earth mortar all show comparatively low density, high porosity, low thermal conductivity, high water vapour permeability and variable but generally high hygroscopic sorption. Craigleith, Hailes and Giffnock sandstones, no longer available but obtained from conservation works on historic buildings, and Locharbriggs and Hazeldean sandstones, obtained from current production, all show intermediate values of these properties. Crathes granodiorite and Scottish whinstone (from current production) show high density, low porosity, high thermal conductivity, low water vapour permeability and low hygroscopic sorption. It is shown that these materials are all relevant to Scottish buildings constructed in traditional masonry and this paper presents the first comprehensive set of hygrothermal property data for them.

scholarly journals Manufacturing Technique of Heat-Insulating and Flame-Retardant Three-Dimensional Composite Base Fabrics

2013 ◽  
Vol 8 (1) ◽  
pp. 155892501300800
Author(s):  
Jia-Horng Lin ◽  
Chen-Hung Huang ◽  
Ching-Wen Lin ◽  
Ching Wen Lou
Keyword(s):  
Thermal Conductivity ◽  
Tensile Strength ◽  
Melting Point ◽  
Flame Retardant ◽  
Three Dimensional ◽  
Weight Ratio ◽  
Air Permeability ◽  
Maximum Tensile Strength ◽  
Manufacturing Technique ◽  
Pu Foam

In this research, we create a PET/TPU/PU composite base fabric from a PET nonwoven base fabric, a TPU honeycomb grid, and a PU foam plank. First, the PET base fabric is made from 7D three-dimensional-hollow-crimp fiber (7D PET) and low-melting-point (low-Tm) fibers with weight ratio and number of lamination layers as the parameters. The hardness and rebound resilience rate of the PET nonwoven base fabric are 71% and 63.5%, respectively. The PET nonwoven base fabric's optimum air permeability is 240 cm3/s/cm2. The maximum tensile strength of the PET nonwoven base fabric with 9 layers of lamination is 39.8 kg/cm2, and when the weight ratio is either 4:6 or 3:7, changes to 40 kg/cm2. The PET/TPU/PU composite base fabric has a LOI of 33 when the number of lamination layers is 10, or when the low-Tm fiber content is 50%; the composite base fabric's average optimum thermal conductivity is 0.914 W/mK.

scholarly journals Investigation of the Characteristics of Elasticised Woven Fabric by Using PBT Filament Yarns

2016 ◽  
Vol 16 (2) ◽  
pp. 109-117 ◽  
Author(s):  
Hüseyin Kadoğlu ◽  
Krste Dimitrovski ◽  
Arzu Marmaralı ◽  
Pınar Çelik ◽  
Güldemet Başal Bayraktar ◽  
...  
Keyword(s):  
Air Permeability ◽  
Woven Fabrics ◽  
Woven Fabric ◽  
Cotton Yarn ◽  
Cotton Fibres ◽  
Spun Yarns ◽  
Cotton Yarns ◽  
Permanent Elongation ◽  
Thermal Absorptivity ◽  
Sheath Material

Abstract Owing to growing demand for comfortable clothes, elastane filament yarns are being used in fabrics for several garments. In this study, core spun yarns were produced with cotton fibres and PBT/elastane filament yarns (cotton as sheath material, PBT yarn and elastane as core yarns). Twill woven (1/3 Z) fabrics were produced by using core spun yarns (30 tex) and cotton yarns (30 tex) as weft, and 100% cotton yarn (59 tex) as warp yarns. The fabrics consisting of PBT were washed at 100°C for 30 minutes to gain the elasticity. The woven fabrics’ weight, thickness, elongation, permanent elongation, dimensional stability, air permeability, thermal conductivity, thermal absorptivity characteristics were tested and statistically evaluated. According to the results, the fabrics containing PBT and elastane filaments had similar elongation and shrinkage values. PBT filament yarns have a great potential to produce lightweight elastic fabrics.

scholarly journals Neural Network for Predicting Thermal Conductivity of Knit Materials

2008 ◽  
Vol 3 (4) ◽  
pp. 155892500800300 ◽  
Author(s):  
Faten Fayala ◽  
Hamza Alibi ◽  
Sofien Benltoufa ◽  
Abdelmajid Jemni
Keyword(s):  
Neural Network ◽  
Thermal Conductivity ◽  
Mathematical Modelling ◽  
Physical Characteristic ◽  
Air Permeability ◽  
Network Approach ◽  
Conductivity Data ◽  
Neural Network Approach ◽  
Knitted Structure ◽  
Relationship Of

The major aim of comfort research is to find the comfort temperature for an individual or group. This subjective property can be evaluated by means of thermal conductivity as a physical characteristic of fabric. This phenomenon depends on many fabric parameters and it is difficult to study the effect of ones without changing the others. In addition, the non-linear relationship of fabric parameters and thermal conductivity handicap mathematical modelling. So a neural network approach was used to predict the thermal conductivity of knitting structure as a function of porosity, air permeability, weight and fiber conductivity. Data on thermal conductivity are measured by experiments carried out on jersey knitted structure.

Sign in / Sign up

Export Citation Format

Share Document