scholarly journals Evaluation of Bed Cover Properties Produced from Double Fabric Based on Honeycomb

2015 ◽  
Vol 2015 ◽  
pp. 1-7
Author(s):  
A. A. Salama ◽  
A. S. El-Deeb ◽  
I. M. El-shahat
Keyword(s):  
Thermal Comfort ◽  
Water Vapour ◽  
Thermal Insulation ◽  
Abrasion Resistance ◽  
Air Permeability ◽  
Weft Yarn ◽  
Vapour Permeability ◽  
Geometrical Properties ◽  
Fabric Structure ◽  
Air Pockets

This research aims to innovate a new fabric structure, which could be used as a bed cover based on double honeycomb fabric with self-stitching. The honeycomb air pockets were aimed at facing each other to form closed small air chambers which work to sequester the air. The double fabric increases fabric thickness. Thus, the opportunity to improve thermal comfort could be achieved. A number of samples were produced with different densities and counts of weft yarn. Thermal insulation and water vapour permeability were measured and compared with bed covers produced from reversible weft backed structure. Geometrical properties, abrasion resistance, and air permeability were also measured. The results showed that the innovated structure had higher values of thermal insulation than reversible weft backed structure at certain weft counts and densities.

Thermal comfort properties of bamboo tencel knitted fabrics

2016 ◽  
Vol 28 (4) ◽  
pp. 420-428 ◽  
Author(s):  
Govindan Karthikeyan ◽  
Govind Nalankilli ◽  
O L Shanmugasundaram ◽  
Chidambaram Prakash
Keyword(s):  
Thermal Comfort ◽  
Water Vapour ◽  
Air Permeability ◽  
Water Vapour Permeability ◽  
Knitted Fabrics ◽  
Vapour Permeability ◽  
Content Type ◽  
Moisture Management ◽  
Thermal Comfort Properties ◽  
Single Jersey

Purpose – The purpose of this paper is to present the thermal comfort properties of single jersey knitted fabric structures made from bamboo, tencel and bamboo-tencel blended yarns. Design/methodology/approach – Bamboo, tencel fibre and blends of the two fibres were spun into yarns of identical linear density (30s Ne). Each of the blended yarns so produced was converted to single jersey knitted fabrics with loose, medium and tight structures. Findings – An increase in tencel fibre in the fabric had led to a reduction in fabric thickness and GSM. Air permeability and water-vapour permeability also increased with increase in tencel fibre content. The anticipated increase in air permeability and relative water vapour permeability with increase in stitch length was observed. The thermal conductivity of the fabrics was generally found to increase with increase in the proportion of bamboo. Research limitations/implications – It is clear from the foregoing that, although a considerable amount of work has been done on bamboo blends and their properties, still there are many gaps existing in the literature, in particular, on thermal comfort, moisture management and spreading characteristics. Thus the manuscript addresses these issues and provides valuable information on the comfort characteristics of the blended fabrics for the first time. In the evolution of this manuscript, it became apparent that a considerable amount of work was needed to fill up the gaps existing in the literature and hence this work which deals with an investigation of the blend yarn properties and comfort properties of knitted fabrics was taken up. Originality/value – This research work is focused on the thermal comfort parameters of knitted fabrics made from 100 per cent tencel yarn, 100 per cent bamboo yarn and tencel/bamboo blended yarns of different blend ratios.

scholarly journals A study on comfort properties of oak Tasar silk waste and acrylic blended fabrics

2021 ◽  
Vol 13 (2) ◽  
pp. 476-481
Author(s):  
Pallavi Lakhchaura ◽  
Manisha Gahlot
Keyword(s):  
Water Vapour ◽  
Thermal Insulation ◽  
Air Permeability ◽  
Vapour Permeability ◽  
Plain Weave ◽  
Water Vapour Transport ◽  
Weave Fabric ◽  
Blend Ratios ◽  
Twill Weave ◽  
Fibre Waste

Oak Tasar is wild silk with natural golden brown colour and unique texture available in Himalayan region of India. A lot of fibre waste is generated during hand spinning of oak Tasar silk yarn which can be utilized by blending it with compatible fibre to incorporate the properties of both fibres in the yarn.  The present study aimed to develop Oak Tasar silk waste and acrylic blended fabrics and study their comfort properties. The oak Tasar silk and acrylic blended plain weave and twill weave fabrics were prepared with five different blend ratios viz. 100:0, 60:40, 50:50, 40:60 and 0:100. The prepared fabrics were studied for comfort properties like thermal insulation (clo, TIV %), Q-max (warm/cool feeling), air permeability, water vapour transport rate and were statistically analysed. Results revealed that thermal insulation and clo value were found to be increased with increasing acrylic content in the fabric whereas Q- max, air permeability, water vapour permeability values were reduced with the addition of oak Tasar silk fiber in the blend. The 50:50 blended plain weave fabric among the blended fabrics had the highest clo value, i.e. 0.52 and 50:50 blended twill weave fabric had highest Q max value i.e. 0.109W/cm2. It was found from the study that the developed fabrics are comfortable and can be used for light winters.

Analysis of thermal comfort properties of jacquard knitted mattress ticking fabrics

2016 ◽  
Vol 28 (1) ◽  
pp. 105-114 ◽  
Author(s):  
Sena Terliksiz ◽  
Fatma Kalaoğlu ◽  
Selin Hanife Eryürük
Keyword(s):  
Thermal Conductivity ◽  
Sleep Quality ◽  
Thermal Comfort ◽  
Human Body ◽  
Air Permeability ◽  
Vapour Permeability ◽  
Content Type ◽  
Textile Materials ◽  
Sleep Environment ◽  
Comfort Parameters

Purpose – Sleep is a vital and a basic activity of human life and it is a physiological need for human body. Sleep quality is directly influenced by the comfort conditions of sleep environment. The purpose of this paper is to define the role of textile materials utilized as bed fabrics on air and mass transfer from the human body. Design/methodology/approach – Thermal conductivity, thermal resistance, thickness, water vapour permeability and air permeability properties of fabrics were analyzed and statistically evaluated. Thermal conductivity and resistance measurements were performed in Alambeta test instrument. Water vapour permeability tests were done according to the Rotating Platform method, and air permeability was measured in FX 3300 Textest air permeability tester. Relationships between comfort parameters were statistically evaluated with correlation analysis. Findings – Comfort is a major concept in the determination of overall life quality as well as sleep quality of a resting person. Therefore academic studies about thermal comfort prediction of sleep environment and bed surface fabrics are of great importance. This study investigates conventional mattress ticking fabrics in terms of comfort parameters and defines the important fabric properties on comfort parameters. Originality/value – Sleep comfort is a promising area in textile comfort studies with its dynamics different from body thermal comfort during daily life. However, in general comfort studies are about garment materials which are in direct contact with the skin. This study tries to define the comfort status of textile materials which have indirect contact with the human body surface during sleep duration.

scholarly journals Air, moisture and thermal comfort properties of woven fabrics from selected yarns

2018 ◽  
Vol 69 (03) ◽  
pp. 177-182
Author(s):  
ZAHRA QURBAT ◽  
MANGAT ASIF ELAHI ◽  
FRAZ AHMAD ◽  
HUSSAIN SAJID ◽  
ABBAS MUDASSAR ◽  
...  
Keyword(s):  
Water Vapour ◽  
Air Permeability ◽  
Woven Fabrics ◽  
Water Vapour Permeability ◽  
Woven Fabric ◽  
Vapour Permeability ◽  
Weft Direction ◽  
Wetting Time ◽  
Thermal Comfort Properties ◽  
Thermal Absorptivity

Air and moisture transport properties of plain woven fabric made from 20sNec cotton in warp and 20sNec pure yarns of tencel, modal, pro-modal, bamboo, polyester and cotton yarn inweft direction are studied. Major characteristics added for this study include water vapour permeability, air permeability, wettingtime and wicking speed. In comparison of six different samples of variously composed materials in weft direction, the air permeability of tencel was minimum and polyester was maximum, whereas the reverse results were observed for both the samples in case of water vapour permeability. Among the blends with cotton, thermal conductivity of bamboo and thermal absorptivity of polyester was found maximum whereas the minimum thermal resistance was observed for pro modal yarn in weft. Similar pattern was observed in spreading speed and wetting time of the polyester when observed from either side top or bottom. Air and moisture comfort properties of bamboo and pro modal, having nearly similar values are suggested to be used in garments used for golf players

scholarly journals Investigation of the comfort properties of traditional woven fabrics with different structural parameters

2020 ◽  
Vol 71 (04) ◽  
pp. 302-308
Author(s):  
MINE AKGUN ◽  
GIZEM KARAKAN GUNAYDIN ◽  
AYÇA GÜRARDA ◽  
ERHAN KENAN ÇEVEN
Keyword(s):  
Thermal Resistance ◽  
Water Vapour ◽  
Structural Parameters ◽  
Air Permeability ◽  
Woven Fabrics ◽  
Water Vapour Permeability ◽  
Test Results ◽  
Vapour Permeability ◽  
Thermal Absorptivity

Turkish traditional Buldan weavings are known as special fabrics in terms of providing comfortable clothes which are known to be natural and healthy in Denizli, Turkey. The research presented in this paper assesses the effects of different fabric structural parameters of Buldan fabrics on comfort properties such as thermal resistance, thermal absorptivity, water vapour permeability and air permeability. Five different Buldan fabrics woven with different fabric structural parameters were produced. According to test results, cotton/Tencel Buldan fabrics indicated similar comfort properties with the 100% cotton Buldan fabric properties. Additionally, the lowest thermal absorptivity was observed from 100% cotton Buldan fabrics which give the warmth feeling among the evaluated samples.

scholarly journals Correlation of Air Permeability to Other Breathability Parameters of Textiles

Polymers ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 140
Author(s):  
Karel Adámek ◽  
Antonin Havelka ◽  
Zdenek Kůs ◽  
Adnan Mazari
Keyword(s):  
Water Vapour ◽  
Air Permeability ◽  
Water Vapour Permeability ◽  
Textile Material ◽  
Permeability Measurement ◽  
Smart Textiles ◽  
Vapour Permeability ◽  
Clothing Comfort ◽  
Strong Relation ◽  
Water Vapour Resistance

In the field of textile comfort of smart textiles, the breathability of the material is very important. That includes the flow of air, water and water vapours through the textile material. All these experiments are time consuming and costly; only air permeability is much faster and economical. The research is performed to find correlation between these phenomena of breathability and to predict the permeability based on only the air permeability measurement. Furthermore, it introduces a new way of expressing the Ret (water vapour resistance) unit according to SI standards as it is connected with the air permeability of garments. The need to find a correlation between air permeability and water vapour permeability is emphasised in order to facilitate the assessment of clothing comfort. The results show that there is a strong relation between air permeability and water vapour permeability for most of the textile material.

Some Studies on the Moisture Management Properties of Cotton and Bamboo Yarn Knitted Fabrics

2015 ◽  
Vol 1134 ◽  
pp. 225-230 ◽  
Author(s):  
Nadhirah Mohd Amran ◽  
Mohd Rozi Ahmad ◽  
Mohamad Faizul Yahya ◽  
Amily Fikry ◽  
Ahmad Munir Che Muhamed ◽  
...  
Keyword(s):  
Water Vapour ◽  
Air Permeability ◽  
Water Vapour Permeability ◽  
Water Penetration ◽  
Knitted Fabrics ◽  
Vapour Permeability ◽  
Spreading Area ◽  
Moisture Management ◽  
Management Capability ◽  
Cotton Yarns

This paper reports on the moisture management properties of fabrics made from yarns of 100% cotton, 100% bamboo and combination of bamboo and cotton yarns. The fabrics were knitted on a circular knitting machine and scoured before measuring them for moisture management capability, air permeability and water vapour permeability. The results showed that all fabrics have good overall moisture management capability which classified them as water penetration fabric with small spreading area. The fabric consisting of the combination of bamboo and cotton yarns of 83/17 ratio gave the highest air and water vapour permeability.

Effects of finishing on the mechanical and thermal properties of fabrics from wool and hollow polyester fibres

2011 ◽  
Vol 81 (19) ◽  
pp. 2006-2016 ◽  
Author(s):  
Akbar Khoddami ◽  
Mohammad I Soleimani ◽  
Hugh Gong
Keyword(s):  
Thermal Properties ◽  
Water Vapour ◽  
Polyester Fibre ◽  
Air Permeability ◽  
Hollow Fibre ◽  
Water Vapour Permeability ◽  
Mechanical And Thermal Properties ◽  
Shear Rigidity ◽  
Vapour Permeability ◽  
Hollow Fibres

The effects of finishing steps on hollow and solid polyester/wool have been studied in order to establish the processing behaviour and performance characteristics of fabrics from these fibres. The effect of hollow fibres on fabric tensile strength, pilling, and crease recovery were studied. In addition, the water vapour permeability, air permeability, thermal properties and fabric handle were investigated. The results show that finishing has no adverse effects on fabric strength. By using hollow fibres in the fabrics, the extent of pilling was reduced. Among the different steps of finishing, scouring has the most significant effect on fabric hand due mainly to the large reduction in both bending, and shear rigidity and hysteresis. The results on crease recovery, water vapour permeability and air permeability revealed that the fabric properties are more affected by the fabric structure than the type of polyester fibre. In addition, while the hollow fibre fabrics always have lower thermal conductivity than similar fabrics with solid polyester fibres, their thermal properties are greatly affected by the dyeing process.

Thermo-physiological properties of 3D spacer knitted fabrics

2016 ◽  
Vol 28 (3) ◽  
pp. 328-339 ◽  
Author(s):  
Rajesh Mishra ◽  
Arumugam Veerakumar ◽  
Jiri Militky
Keyword(s):  
Thermal Conductivity ◽  
Water Vapour ◽  
Air Permeability ◽  
Water Vapour Permeability ◽  
Knitted Fabrics ◽  
Vapour Permeability ◽  
Content Type ◽  
Spacer Fabric ◽  
Multifilament Yarns ◽  
Spacer Fabrics

Purpose – The purpose of this paper is to investigate effect of material properties in 3D knitted fabrics on thermo-physiological comfort. Design/methodology/approach – In the present study six different spacer fabrics were developed. Among these six fabrics, it was classified into two groups for convenient analysis of results, the first group has been developed using polyester/polypropylene blend with three different proportion and second group with polyester/polypropylene/lycra blend having another three different composition. As a spacer yarn, three different types of 88 dtex polyester monofilament yarn and polyester multifilament yarns (167 dtex and 14.5 tex) were used and 14.5 tex polypropylene and 44 dtex lycra multifilament yarns were also used for the face and back side of the spacer fabrics (Table I). These fabrics were developed in Syntax Pvt Ltd Czech Republic. Findings – The main influence on the water vapour permeability of warp knitted spacer fabrics is the kind of raw material, i.e. fibre wetting and wicking. Also there is no correlation between air permeability and water vapour permeability. It is found that both air permeability and thermal conductivity are closely related to the fabric density. It is also found that the fabric characteristics of spacer fabric show a very significant effect on the air permeability, thermal conductivity and mechanical properties of spacer fabric. Therefore, selection of spacer fabric for winter clothing according to its fabric characteristics. Practical implications – The main objective of the present study is to produce spacer knitted 3D fabrics suitable for defined climatic conditions to be used as clothing or in sports goods. Originality/value – New 3D knitted spacer fabrics can be produced with improved comfort properties.

Effect of environmentally friendly plasma treatment on microfibre fabrics to improve some comfort properties

2018 ◽  
Vol 30 (1) ◽  
pp. 29-37
Author(s):  
Ramakrishnan G. ◽  
Prakash C. ◽  
Janani G.
Keyword(s):  
Plasma Treatment ◽  
Water Vapour ◽  
Functional Properties ◽  
Design Methodology ◽  
Air Permeability ◽  
Water Vapour Permeability ◽  
Test Results ◽  
Vapour Permeability ◽  
Content Type ◽  
Significant Difference

Purpose The purpose of this paper is to investigate plasma treatment for Tencel microfibre fabrics for possible improvement in various functional properties. Design/methodology/approach The plasma treated and untreated fabrics were dyed using reactive dyes and evaluated for comfort properties such as wicking, water vapour permeability and air permeability. Findings The various comfort properties of plasma treated and an untreated Tencel microfibre fabric have been studied. The wicking results showed a significant reduction in wicking time for plasma treated fabrics compared to untreated fabrics. The test results for water vapour permeability show no significant difference between plasma treated and untreated fabrics. The plasma treated samples show higher air permeability than untreated samples. In the wetting test, it is clearly seen that the plasma treated samples absorbed the water at a faster rate. Originality/value This research investigates plasma treatment for Tencel microfibre fabrics for possible improvement in various functional properties.

Sign in / Sign up

Export Citation Format

Share Document