scholarly journals Dual-Mode Patch Filter with Metal Wall Structures

2013 ◽  
Vol 2013 ◽  
pp. 1-4
Author(s):  
D. Kang ◽  
Y. Sung
Keyword(s):  
Insertion Loss ◽  
Fractional Bandwidth ◽  
Dual Mode ◽  
Inductive Element ◽  
Wall Structures ◽  
Capacitive Element ◽  
Metal Wall

A dual-mode patch filter with metal wall structures is presented. The proposed structure consists of substrate 1 with metal wall structures and substrate 2 with a patch resonator. Because the symmetry of the structure can be perturbed by both long and short strips of the metal wall structures, the dual mode is achieved. The inductive element is introduced to the patch resonator through vias of the metal wall structures. The capacitive element is introduced through a gap between the patch resonator and the metal strips. The measured 3 dB fractional bandwidth for the passband is 10.4%, and the measured minimum insertion loss is 1.3 dB.

scholarly journals Novel Hexagonal Dual-Mode Substrate Integrated Waveguide Filter with Source-Load Coupling

2014 ◽  
Vol 2014 ◽  
pp. 1-5
Author(s):  
Ziqiang Xu ◽  
Gen Zhang ◽  
Hong Xia ◽  
Meijuan Xu
Keyword(s):  
Center Frequency ◽  
Substrate Integrated Waveguide ◽  
Fractional Bandwidth ◽  
Dual Mode ◽  
Transmission Zeros ◽  
Cavity Structure ◽  
Waveguide Filter ◽  
And Performance ◽  
Single Cavity ◽  
Good Agreement

Hexagonal dual-mode cavity and its application to substrate integrated waveguide (SIW) filter are presented. The hexagonal SIW resonator which can combine flexibility of rectangular cavity and performance of circular cavity is convenient for dual-mode bandpass filters design. By introducing coupling between source and load, the filter not only has good selectivity due to two controllable transmission zeros, but also has a small size by the virtue of its single-cavity structure. A demonstration filter with a center frequency of 10 GHz and a 3 dB fractional bandwidth of 4% is designed and fabricated to validate the proposed structure. Measured results are in good agreement with simulated ones.

A Wideband Bandpass Filter Integrated Single-Pole Double-Throw Switch with Wide Stopband

Frequenz ◽  
2018 ◽  
Vol 72 (11-12) ◽  
pp. 533-537 ◽  
Author(s):  
Jin Xu ◽  
Qi-Hang Cai ◽  
Zhi-Yu Chen
Keyword(s):  
Insertion Loss ◽  
Bandpass Filter ◽  
Fractional Bandwidth ◽  
Central Frequency ◽  
Resonant Frequencies ◽  
Capacitively Coupled ◽  
Filter Theory ◽  
Compact Size ◽  
Better Than ◽  
Coupled Resonator

Abstract This paper proposes a wideband bandpass filter (BPF) integrated single-pole double-throw (SPDT) switch by using the capacitively coupled LC resonators with loaded p-i-n diodes. The BPF-integrated on-state channel can be synthesized by using the coupled resonator filter theory, and the off-state channel with high suppression is built due to the misaligned resonant frequencies of LC resonators. As an example, a BPF-integrated SPDT switch is designed and fabricated with the central frequency of 1 GHz and the 3 dB fractional bandwidth of 29.7 %. The on-state channel has a measured insertion loss of 1.23 dB, and a 20 dB rejection wide stopband from 1.47 GHz to 8.6 GHz. The off state channel has a 43 dB suppression around 1 GHz. The isolation between two ports is better than 52.4 dB. The fabricated BPF-integrated SPDT switch size including bias circuits but excluding feeding lines has a compact size of 0.086 λg×0.096 λg.

scholarly journals Sharp Skirt Dual-Mode Bandpass Filter with Overlay Plate to Control Upper Passband Edge

2019 ◽  
Vol 8 (6) ◽  
pp. 2357-2360
Keyword(s):  
Analytical Model ◽  
Insertion Loss ◽  
Return Loss ◽  
Bandpass Filter ◽  
Center Frequency ◽  
Dual Mode ◽  
Rf Receivers ◽  
Attenuation Level ◽  
Frequency Selective ◽  
Fixed Center

This paper presents design and analytical model for Sharp Skirt Dual-Mode Bandpass Filter for RF receivers. Proposed filter is designed using open stub loaded H shaped resonator. Based on analytical model insertion loss S21 and return loss S11 for proposed filter are demonstrated. Inductive Overlaying plate is proposed to control upper passband edge of proposed filter to improve frequency selectivity with fixed center frequency. The proposed filter has sharp frequency selective range from 5.1GHz to 9.2GHz. With overlay plate, frequency selective range is tuned to 5.1GHz-8.6GHz. Without overlaying plate the proposed filter has return loss greater than 10dB and insertion loss of 0.7dB. Lower and upper passband edges are at 5.1GHz and 9.2GHz with attenuation level of 52dB and 54dB respectively. With overlaying plate, the filter has same S 11 and S 21 parameters, but upper passband edge is shifted from 9.2GHz to 8.6GHz

Reconfigurable dual-mode band-pass filter with switchable bandwidth using PIN diodes

2014 ◽  
Vol 7 (6) ◽  
pp. 655-660 ◽  
Author(s):  
Photos Vryonides ◽  
Symeon Nikolaou ◽  
Sangkil Kim ◽  
Manos M. Tentzeris
Keyword(s):  
Insertion Loss ◽  
Center Frequency ◽  
Band Pass Filter ◽  
Dual Mode ◽  
Pin Diodes ◽  
Pass Filter ◽  
Physical Size ◽  
Wireless Applications ◽  
Band Pass ◽  
Dc Bias

A reconfigurable band-pass filter with switchable bandwidth, for wireless applications is demonstrated using a dual-mode microstrip square-loop resonator. The proposed filter has been designed on Rogers RO4003C and achieves switchable bandwidth by changing the length of two tuning stubs with the implementation of two strategically placed p-i-n diodes as switching elements. The filter was designed with a center frequency of 2.4 GHz and the two distinct operation states have bandwidths, 113 MHz (4.8%) with an insertion loss of 1.2 dB and 35 MHz (1.5%) with an insertion loss of 1.5 dB. The physical size of the fabricated reconfigurable filter including the implementation of the DC bias lines is comparable to the size of a conventional filter.

Miniaturized Dual-Band Bandpass Filter Using Embedded Dual-Mode Resonator with Controllable Bandwidths

Frequenz ◽  
2016 ◽  
Vol 70 (9-10) ◽  
Author(s):  
Chuanming Zhu ◽  
Jin Xu ◽  
Wei Kang ◽  
Zhenxin Hu ◽  
Wen Wu
Keyword(s):  
Insertion Loss ◽  
Degrees Of Freedom ◽  
Bandpass Filter ◽  
The Other ◽  
Dual Band ◽  
Dual Mode ◽  
Transmission Zeros ◽  
Low Insertion Loss ◽  
Multiple Transmission ◽  
Mode Resonator

AbstractIn this paper, a miniaturized dual-band bandpass filter (DB-BPF) using embedded dual-mode resonator (DMR) with controllable bandwidths is proposed. Two passbands are generated by two sets of resonators operating at two different frequencies. One set of resonators is utilized not only as the resonant elements that yield the lower passband, but also as the feeding structures with source-load coupling to excite the other to produce the upper passband. Sufficient degrees of freedom are achieved to control the center frequencies and bandwidths of two passbands. Moreover, multiple transmission zeros (TZs) are created to improve the passband selectivity of the filter. The design of the filter has been demonstrated by the measurement. The filter features not only miniaturized circuit sizes, low insertion loss, independently controllable central frequencies, but also controllable bandwidths and TZs.

Miniaturized Wideband Bandpass Filter based on Capacitor-loaded One-eighth Wavelength Coupled Line

2021 ◽  
Vol 36 (7) ◽  
pp. 865-871
Author(s):  
Jin Shi ◽  
Jiancheng Dong ◽  
Kai Xu ◽  
Lingyan Zhang
Keyword(s):  
Insertion Loss ◽  
Simple Structure ◽  
Bandpass Filter ◽  
State Of The Art ◽  
Center Frequency ◽  
Fractional Bandwidth ◽  
Coupled Line ◽  
Transmission Zeros ◽  
Compact Size ◽  
Multiple Transmission

A novel miniaturized wideband bandpass filter (BPF) using capacitor-loaded microstrip coupled line is proposed. The capacitors are loaded in parallel and series to the coupled line, which makes the filter just require one one-eighth wavelength coupled line and achieve filtering response with multiple transmission poles (TPs) and transmission zeros (TZs). Compared with the state-of-the-art microstrip wideband BPFs, the proposed filter has the advantages of compact size and simple structure. A prototype centered at 1.47 GHz with the 3-dB fractional bandwidth of 86.5% is demonstrated, which exhibits the compact size of 0.003λ2 g (λg is the guided wavelength at the center frequency) and the minimum insertion loss of 0.37 dB.

scholarly journals Bandwidth Improvement of MMIC Single-Pole-Double-Throw Passive HEMT Switches with Radial Stubs in Impedance-Transformation Networks

Electronics ◽  
2020 ◽  
Vol 9 (2) ◽  
pp. 270
Author(s):  
Yi-Fan Tsao ◽  
Joachim Würfl ◽  
Heng-Tung Hsu
Keyword(s):  
Insertion Loss ◽  
Electron Mobility ◽  
High Electron Mobility Transistor ◽  
Conventional Approach ◽  
High Electron ◽  
Frequency Range ◽  
Fractional Bandwidth ◽  
High Electron Mobility ◽  
State Capacitance ◽  
Better Than

In this paper, we propose a new configuration for improving the isolation bandwidth of MMIC single-pole-double-throw (SPDT) passive high-electron-mobility transistor (HEMT) switches operating at millimeter frequency range. While the conventional configuration adopted open-stub loading for compensation of the off-state capacitance, radial stubs were introduced in our approach to improve the operational bandwidth of the SPDT switch. Implemented in 0.15 m GaAs pHEMT technology, the proposed configuration exhibited a measured insertion loss of less than 2.5 dB with better than 30 dB isolation level over the frequency range from 33 GHz to 44 GHz. In terms of the bandwidth of operation, the proposed configuration achieved a fractional bandwidth of 28.5% compared to that of 12.3% for the conventional approach. Such superior bandwidth performance is mainly attributed to the less frequency dependent nature of the radial stubs.

scholarly journals A Compact Dual-Mode Bandpass Filter with High Out-of-Band Suppression Using a Stub-Loaded Resonator Based on the GaAs IPD Process

Electronics ◽  
2020 ◽  
Vol 9 (5) ◽  
pp. 712 ◽  
Author(s):  
Wei Zhang ◽  
Zhao Yao ◽  
Jie Zhang ◽  
Eun Seong Kim ◽  
Nam Young Kim
Keyword(s):  
Insertion Loss ◽  
High Performance ◽  
Return Loss ◽  
Bandpass Filter ◽  
Open Loop ◽  
Fabrication Process ◽  
Dual Mode ◽  
Transmission Zeros ◽  
Semiconductor Fabrication ◽  
Device Size

In this letter, a compact dual-mode bandpass filter (BPF) with an ultra-wide stopband that employs two folded open-loop resonators (FOLRs) and stub-loaded resonators (SLRs) is proposed. The dual-mode resonators are optimized by loading two SLRs onto the folded open-loop resonators, and this process is analyzed using the dual-mode theory. To miniaturize the device size and increase chip performance, the proposed BPF is fabricated by a III–V compound semiconductor-fabrication process using a high-performance GaAs substrate based on the integration passivation device (IPD) fabrication process. A compact dual-mode BPF with low insertion loss and high return loss is designed and fabricated. Two extra transmission zeros (TZs) located in the high-frequency range increase the wide stopband, and the two TZs near the passband result in a higher selectivity. A resonant frequency centered at 7.45 GHz with an insertion loss of −1.21 dB and a measured return loss of higher than −23.53 dB and 3 dB fractional bandwidths of 5.8% are achieved. The stopband can be suppressed up to 20 GHz owing to the two tunable TZs resulting in higher selectivity and wideband rejection. The size of the filter was drastically optimized using a simplified architecture of two FOLRs and SLRs.

Sign in / Sign up

Export Citation Format

Share Document