scholarly journals Effect of Viscosity Variation on the Micropolar Fluid Squeeze Film Lubrication of a Short Journal Bearing

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
N. B. Naduvinamani ◽  
Archana K. Kadadi
Keyword(s):  
Carrying Capacity ◽  
Micropolar Fluid ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Closed Form Solution ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Viscosity Variation ◽  
Modified Reynolds Equation

A theoretical study of the effect of the viscosity variation on the squeeze film performance of a short journal bearing operating with micropolar fluid is presented. The modified Reynolds equation accounting for the viscosity variation in micropolar fluid is mathematically derived. To obtain a closed form solution, the short bearing approximation under constant load is considered. The modified Reynolds equation is solved for the fluid film pressure and then the bearing characteristics, such as obtaining the load carrying capacity and the squeeze film time. According to the results evaluated, the micropolar fluid as a lubricant improves the squeeze film characteristics and results in a longer bearing life, whereas the viscosity variation factor decreases the load carrying capacity and squeezes film time. The result is compared with the corresponding Newtonian case.

scholarly journals MULTIGRID METHOD FOR THE SOLUTION OF COMBINED EFFECT OF VISCOSITY VARIATION AND SURFACE ROUGHNESS ON THE SQUEEZE FILM LUBRICATION OF JOURNAL BEARINGS

2017 ◽  
Vol 46 (1) ◽  
pp. 1-8
Author(s):  
Vishwanath B. Awati ◽  
Ashwini Kengangutti ◽  
Mahesh Kumar N.
Keyword(s):  
Surface Roughness ◽  
Carrying Capacity ◽  
Micropolar Fluid ◽  
Reynolds Equation ◽  
Multigrid Method ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Viscosity Variation ◽  
Film Lubrication

The paper presents, the multigrid method for the solution of combined effect of surface roughness and viscosity variation on the squeeze film lubrication of a short journal bearing operating with micropolar fluid. The modified Reynolds equation which incorporates the variation of viscosity in micropolar fluid is analysed using Multigrid method. The governing modified Reynolds equation is solved numerically for the fluid film pressure and bearing characteristics viz. load carrying capacity and squeeze time. The analysis of the results predicts that, the viscosity variation factor decreases the load carrying capacity and squeeze film time, resulting into a longer bearing life. The results are compared with the corresponding analytical solutions.

Effect of viscosity variation on non-Newtonian lubrication of squeeze film conical bearing having porous wall operating with Rabinowitsch fluid model

2018 ◽  
Vol 233 (7) ◽  
pp. 2538-2551 ◽  
Author(s):  
Pentyala Srinivasa Rao ◽  
Amit Kumar Rahul
Keyword(s):  
Carrying Capacity ◽  
Reynolds Equation ◽  
Porous Wall ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Film Pressure ◽  
Pressure Load ◽  
Load Carrying ◽  
Newtonian Case ◽  
Viscosity Variation

In this study, the effect of viscosity variation of non-Newtonian lubrication on squeeze film characteristics with porous and Rabinowitsch fluid for conical bearings is analyzed. The modified Reynolds equation representing the characteristics of non-Newtonian fluid with viscosity variation on the porous wall followed by the cubic stress law condition is invoked. For lubricant flow in a bearing clearance and in a porous layer Morgan–Cameron approximation is considered. A small perturbation technique is used to compute the pressure generation using modified Reynolds equation of lubrication. Approximate analytical solutions have been obtained for the squeeze film pressure, load-carrying capacity, squeeze film time, and center of pressure. The outcomes are displayed in diagrams and tables, which show that the effect of viscosity variation and porous wall on the squeeze film lubrication of conical bearings decreases film pressure, load-carrying capacity, and response time for the Newtonian case in comparison to the non-Newtonian case.

scholarly journals Theoretical investigation of porous hydrostatic journal bearing under micropolar fluid lubrication

2020 ◽  
Vol 234 (1-2) ◽  
pp. 11-18
Author(s):  
Biplab Bhattacharjee ◽  
Prasun Chakraborti ◽  
Kishan Choudhuri
Keyword(s):  
Carrying Capacity ◽  
Micropolar Fluid ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Low Flow ◽  
Load Carrying Capacity ◽  
Static Stiffness ◽  
Design Charts ◽  
Hydrostatic Bearings ◽  
Load Carrying

The features of micropolar fluid (a non-Newtonian fluid)–lubricated short single-layered porous hydrostatic journal bearing are analyzed theoretically by an iterative method. To investigate hydrostatic journal bearing characteristics, a modified Reynolds equation in the case of micropolar fluid is derived and solved numerically. The obtained results in this work are validated by comparing the same with previously published results with Newtonian and non-Newtonian lubricants in the form of design charts. The static stiffness and load-carrying capacity of the investigated bearing are 80% and 75% higher than conventional hydrostatic bearings. The porous hydrostatic journal bearing exhibits more economical performance as it requires 40% low flow rate and low pump power, and it generates 50% less heat in contrast with other hydrostatic bearings.

Analysis of a circular journal bearing lubricated with micropolar fluids including EHD effects

2014 ◽  
Vol 66 (2) ◽  
pp. 168-173 ◽  
Author(s):  
Boualem Chetti
Keyword(s):  
Elastic Deformation ◽  
Carrying Capacity ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Newtonian Fluids ◽  
Load Carrying Capacity ◽  
Micropolar Fluids ◽  
Content Type ◽  
Load Carrying ◽  
Modified Reynolds Equation

Purpose – The performance of finite circular journal bearing lubricated with micropolar fluids taking into account the elastic deformation of the bearing liner is presented. The paper aims to discuss these issues. Design/methodology/approach – The modified Reynolds equation is obtained using the micropolar lubrication theory. The solution of the modified Reynolds equation is determined using finite difference technique. The static characteristics in terms of load-carrying capacity, attitude angle, side leakage and friction coefficient for micropolar and Newtonian fluids are determined for various values of eccentricity ratio and different values of elastic coefficient. Findings – Compared with Newtonian fluids, the micropolar fluids produce an increase in the load-carrying capacity and a reduction in the attitude angle, the friction factor and side leakage for both the rigid and deformable bearings. Originality/value – It is concluded that the influence of elastic deformation on the bearing characteristics lubricated with micropolar fluids is significantly apparent compared with bearing lubricated with Newtonian fluids.

SEARCH FOR THE MOST USEFUL GEOMETRY OF AN ACOUSTIC JOURNAL BEARING

Tribologia ◽  
2018 ◽  
Vol 273 (3) ◽  
pp. 15-66 ◽  
Author(s):  
Rafał GAWARKIEWICZ
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Computer Simulations ◽  
Carrying Capacity ◽  
Journal Bearing ◽  
Squeeze Film ◽  
Acoustic Levitation ◽  
Load Carrying Capacity ◽  
The Finite Element Method ◽  
Load Carrying

Computer simulations of a number of journal bearing’s geometries utilising acoustic levitation were carried out. The choice of the best geometry depended on the ability of a deformed shape, created by piezo-electric elements, to facilitate squeeze film ultrasonic levitation, and also to create three evenly distributed diverging aerodynamic gaps. Deformations of analysed variants of the bearing’s shape were generated by numerical simulations utilising the finite element method. For the chosen shapes of geometry, prototype bearings were made and their usefulness verified experimentally. As a result, the bearing with the highest load carrying capacity was identified.

Theoretical Analysis of Externally Pressurized Air Journal Bearing

1970 ◽  
Vol 12 (2) ◽  
pp. 123-129 ◽  
Author(s):  
B. C. Majumdar
Keyword(s):  
Experimental Data ◽  
Carrying Capacity ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Design Parameters ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Dimensional Parameters ◽  
Bearing Design

A theoretical investigation is made to predict the performance of an externally pressurized air journal bearing having several pressure sources. The pressure distribution, which leads to the determination of load-carrying capacity and flow requirement, is obtained by solving Reynolds equation numerically. The load and flow, expressed in non-dimensional parameters, are presented for different bearing design parameters (dimensionless). The results predicted by this method are compared with others' experimental data.

On the study of Rayleigh step slider bearings lubricated with non-Newtonian Rabinowitsch fluid

2017 ◽  
Vol 69 (5) ◽  
pp. 666-672
Author(s):  
N.B. Naduvinamani ◽  
Siddharam Patil ◽  
S.S. Siddapur
Keyword(s):  
Carrying Capacity ◽  
Reynolds Equation ◽  
Maximum Load ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Content Type ◽  
Slider Bearings ◽  
Load Carrying ◽  
Modified Reynolds Equation ◽  
Frictional Coefficients

Purpose Nowadays, the use of Newtonian fluid as a lubricant is diminishing day by day, and the use of non-Newtonian fluids has gained importance. This paper presents an analysis of the static characteristics of Rayleigh step slider bearing lubricated with non-Newtonian Rabinowitsch fluid, which has not been studied so far. The purpose of this paper is to derive the modified Reynolds equation for Rabinowitsch fluids for two regions and to obtain the optimum bearing parameters for the Rayleigh step slider bearings. Design/methodology/approach The governing equations relevant to the problem under consideration are derived. The modified Reynolds equation is derived, and it is found to be highly non-linear and hence small perturbation method is adopted to find solution. Findings From this study it is found that there is an increase in the load-carrying capacity, pressure and frictional coefficients for dilatant fluids as compared to the corresponding Newtonian case. Further, for dilatant lubricants the maximum load-carrying capacity is attained for the slightly larger values of entry region length of Rayleigh step bearing as compared to Newtonian and pseudoplastic lubricants. Originality/value Rabinowitsch fluid is used for the study of lubrication characteristics of Rayleigh step bearings. The author believes that the paper presents these results for the first time.

scholarly journals Non-Newtonian Effects on the Squeeze Film Characteristics between a Sphere and a Flat Plate: Rabinowitsch Model

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Udaya P. Singh ◽  
Ram S. Gupta
Keyword(s):  
Flat Plate ◽  
Carrying Capacity ◽  
Significant Variation ◽  
Reynolds Equation ◽  
Fluid Model ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Film Pressure ◽  
Load Carrying ◽  
Film Characteristics

The use of additives (polyisobutylene, ethylene-propylene, lithium hydroxy stearate, hydrophobic silica, etc.) changes lubricants’ rheology due to which they show pseudoplastic and dilatant nature, which can be modelled as cubic stress fluid model (Rabinowitsch fluid model). The present theoretical analysis investigates the effects of non-Newtonian pseudoplastic and dilatant lubricants on the squeezing characteristics of a sphere and a flat plate. The modified Reynolds equation has been derived and an asymptotic solution for film pressure is obtained. The results for the film pressure distribution, load carrying capacity, and squeezing time characteristics have been calculated for various values of pseudoplastic parameter and compared with the Newtonian results. These characteristics show a significant variation with the non-Newtonian pseudoplastic and dilatant behavior of the fluids.

Elastic Deformation Effects on the Thermo-Hydrodynamic Aspect of Porous Journal Bearings

2014 ◽  
Vol 353 ◽  
pp. 275-279
Author(s):  
S. Boubendir ◽  
Salah Larbi ◽  
R. Bennacer
Keyword(s):  
Elastic Deformation ◽  
Carrying Capacity ◽  
Reynolds Equation ◽  
Maximum Pressure ◽  
Load Carrying Capacity ◽  
Static Characteristics ◽  
Governing Equations ◽  
Load Carrying ◽  
Variation Parameter ◽  
Viscosity Variation

In this paper, the effects of porous bush elastic deformation on the static characteristics of finite porous journal bearing are investigated using Darcy’s law. The modified Reynolds equation applied to thermo-hydrodynamic problems is modified by considering the viscosity variation along the film thickness. The film pressure distribution and other characteristics such as the load carrying capacity and attitude angle are obtained by solving the governing equations numerically. Obtained results showed that deformation is considerable in the maximum pressure zone, and the elastic deformation will decrease the load carrying capacity. The viscosity variation parameter tends also to decrease the load carrying capacity.

Effects of piezo-viscous–coupled stress lubricant on the squeeze film performance of parallel triangular plates

2019 ◽  
Vol 234 (9) ◽  
pp. 1514-1521 ◽  
Author(s):  
H Aminkhani ◽  
M Daliri
Keyword(s):  
Pressure Distribution ◽  
Carrying Capacity ◽  
Couple Stress ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Film Performance ◽  
Pressure Dependency ◽  
Load Carrying ◽  
Viscosity Variation ◽  
Coupled Stress

The paper shows the combined effects of couple stress fluids and lubricant viscosity variation with pressure in squeeze film performance of parallel triangular plates. By solving Reynolds equation and using perturbation method, the pressure distribution is obtained with consideration of viscosity variation with pressure. Also, with integrating pressure in the film region, load-carrying capacity is derived. A fourth-order Rang–Kutta is used to solve the nonlinear differential equation between lubricant film thickness and time. Various cases of couple stress, iso-viscous and piezo-viscous contributions are analyzed. According to the results, it is found that using couple stress fluid as a lubricant and considering viscosity–pressure dependency will increase characteristics of the squeeze film such as load-carrying capacity, pressure distribution, and triangular plates moving time, significantly as compared to the classical Newtonian iso-viscous lubricant.

Sign in / Sign up

Export Citation Format

Share Document