scholarly journals Dufour and Soret Effects on Square Porous Annulus

2014 ◽  
Vol 6 ◽  
pp. 209753 ◽  
Author(s):  
N. Nik-Ghazali ◽  
Irfan Anjum Badruddin ◽  
A. Badarudin ◽  
S. Tabatabaeikia
Keyword(s):  
Mass Transfer ◽  
Nusselt Number ◽  
Heat And Mass Transfer ◽  
Significant Contribution ◽  
Soret Effect ◽  
Physical Parameters ◽  
Concentration Profiles ◽  
Cool Temperature ◽  
Dufour Effect ◽  
Inner Surface

A study on heat and mass transfer behaviour on porous medium embedded in a square annulus is conducted. The inner surface wall is considered to have a cool temperature T c while the outer surface is exposed to a hot temperature T h. Finite element method (FEM) is used to solve the governing partial differential equations. The results present the influences of the Dufour and Soret effects on the heat and mass transfer of a square annulus. The effects of various physical parameters on the temperature and concentration profiles together with the local Nusselt and Sherwood numbers are presented graphically. It is found that when Dufour parameter is increased, Nusselt number increases. Dufour effect has more influences on velocity profile, while it has no significant effect on the concentration and can be deemed negligible. It is observed that the local Nusselt number is highest at the bottom wall for low values of Dufour parameter; however, the top wall Nusselt number is highest for higher values of Dufour parameter. Soret effect tends to make more significant contribution to the concentration profile than Dufour effect.

Effect of Melting on Mixed Convection Heat and Mass Transfer in a Non-Newtonian Fluid Saturated Non-Darcy Porous Medium

2012 ◽  
Vol 134 (4) ◽  
Author(s):  
R. R. Kairi ◽  
P. V. S. N. Murthy
Keyword(s):  
Mass Transfer ◽  
Porous Medium ◽  
Mixed Convection ◽  
Heat And Mass Transfer ◽  
Newtonian Fluid ◽  
Power Law ◽  
Soret Effect ◽  
Physical Parameters ◽  
Convection Heat ◽  
Wide Range

In this paper, we investigate the influence of melting on mixed convection heat and mass transfer from vertical flat plate in a non-Newtonian fluid-saturated non-Darcy porous medium including the prominent Soret effect. The wall and the ambient medium are maintained at constant but different levels of temperature and concentration such that the heat and mass transfer occurs from the wall to the medium. The Ostwald–de Waele power law model is used to characterize the non-Newtonian fluid behavior. A similarity solution for the transformed governing equations is obtained. The numerical computation is carried out for various values of the nondimensional physical parameters. The variation of temperature, concentration, and heat and mass transfer coefficients with the power law index, mixed convection parameter, inertia parameter, melting parameter, Soret number, buoyancy ratio, and Lewis number is discussed for a wide range of values of these parameters.

scholarly journals Study of MHD Heat and Mass Transfer Flow for Hall and Ion-Slip Currents Effects in High Porosity Medium and Revolving System

2020 ◽  
pp. 100-125
Author(s):  
Md. Delowar Hossain ◽  
Md. Abdus Samad ◽  
Md. Mahmud Alam
Keyword(s):  
Mass Transfer ◽  
Prandtl Number ◽  
Heat And Mass Transfer ◽  
Magnetic Parameter ◽  
Physical Parameters ◽  
Concentration Profiles ◽  
High Porosity ◽  
Ion Slip ◽  
Soret Number ◽  
Transfer Flow

In high porosity medium and revolving system the effects of ion-slip and Hall currents are studied on MHD heat and mass transfer flow. The non-linear coupled partial differential equations are determined using byl transformations and solve these equations employing finite difference method. Velocity, temperature as well as concentration profiles are studied for the concerned physical parameters and results are presented graphically. Due to the Hall and ion-slip parameters, Eckert number, and porosity parameter the velocity profiles are pronounced while it is declined for the effects of magnetic parameter, Prandtl number. Also the magnetic parameter enhances the temperature profiles. On the other hand, the temperature (concentration) profile decreases (increases) for the increasing effect of Prandtl number (Soret number). The rate of changes of velocity, temperature and concentration profiles are also presented graphically.

scholarly journals UNSTEADY MHD HEAT AND MASS TRANSFER FLOW OF A RADIATING FLUID PAST AN ACCELERATED INCLINED POROUS PLATE WITH HALL CURRENT

2017 ◽  
Vol 5 (7) ◽  
pp. 42-59
Author(s):  
G. Sivaiah ◽  
K. Jayarami Reddy
Keyword(s):  
Mass Transfer ◽  
Nusselt Number ◽  
Skin Friction ◽  
Heat And Mass Transfer ◽  
Sherwood Number ◽  
Hall Current ◽  
Porous Plate ◽  
Physical Parameters ◽  
Laplace Transform Technique ◽  
Transfer Flow

In this paper an analysis has been performed to study the effects of Hall current and radiation of MHD free convective heat and mass transfer flow of a radiating fluid past an accelerated inclined porous plate with hall current in presence of thermal diffusion and heat source. The solutions for velocity, temperature and concentration distributions are obtained by using Laplace transform technique. The expressions for skin friction, Nusselt number and Sherwood number are also derived. The variations in fluid velocity, temperature and species concentration are shown graphically, whereas numerical values of skin friction, Nusselt number and Sherwood number are presented in tabular form for various values of physical parameters.

Unsteady MHD Free Convective Heat and Mass Transfer Flow Past a Vertical Porous Plate in the Presence of Radiation and Chemical Reaction

2017 ◽  
Vol 6 (10) ◽  
pp. 116
Author(s):  
J. Buggaramulu ◽  
M. Venkatakrishna ◽  
Y. Harikrishna
Keyword(s):  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Convective Heat ◽  
Chemical Reaction ◽  
Porous Plate ◽  
Physical Parameters ◽  
Governing Equations ◽  
Vertical Porous Plate ◽  
Flow Past ◽  
Transfer Flow

The objective of this paper is to analyze an unsteady MHD free convective heat and mass transfer boundary flow past a semi-infinite vertical porous plate immersed in a porous medium with radiation and chemical reaction. The governing equations of the flow field are solved numerical a two term perturbation method. The effects of the various parameters on the velocity, temperature and concentration profiles are presented graphically and values of skin-frication coefficient, Nusselt number and Sherwood number for various values of physical parameters are presented through tables.

scholarly journals On the Influence of Soret and Dufour Effects on MHD Free Convective Heat and Mass Transfer Flow over a Vertical Channel with Constant Suction and Viscous Dissipation

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Ime Jimmy Uwanta ◽  
Halima Usman
Keyword(s):  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Viscous Dissipation ◽  
Convective Heat ◽  
Vertical Channel ◽  
Skin Friction Coefficient ◽  
Physical Parameters ◽  
Soret And Dufour Effects ◽  
Constant Suction ◽  
Dufour Number

The present paper investigates the combined effects of Soret and Dufour on free convective heat and mass transfer on the unsteady one-dimensional boundary layer flow over a vertical channel in the presence of viscous dissipation and constant suction. The governing partial differential equations are solved numerically using the implicit Crank-Nicolson method. The velocity, temperature, and concentration distributions are discussed numerically and presented through graphs. Numerical values of the skin-friction coefficient, Nusselt number, and Sherwood number at the plate are discussed numerically for various values of physical parameters and are presented through tables. It has been observed that the velocity and temperature increase with the increase in the viscous dissipation parameter and Dufour number, while an increase in Soret number causes a reduction in temperature and a rise in the velocity and concentration.

scholarly journals Analysis of a Chemically Reactive Mhd Flow With Heat and Mass Transfer Over a Permeable Surface

2019 ◽  
Vol 24 (1) ◽  
pp. 53-66
Author(s):  
O.J. Fenuga ◽  
S.J. Aroloye ◽  
A.O. Popoola
Keyword(s):  
Boundary Layer ◽  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Mhd Flow ◽  
Skin Friction Coefficient ◽  
Permeable Surface ◽  
Physical Parameters ◽  
Boundary Layer Equations ◽  
Special Cases ◽  
Momentum Boundary Layer

Abstract This paper investigates a chemically reactive Magnetohydrodynamics fluid flow with heat and mass transfer over a permeable surface taking into consideration the buoyancy force, injection/suction, heat source/sink and thermal radiation. The governing momentum, energy and concentration balance equations are transformed into a set of ordinary differential equations by method of similarity transformation and solved numerically by Runge- Kutta method based on Shooting technique. The influence of various pertinent parameters on the velocity, temperature, concentration fields are discussed graphically. Comparison of this work with previously published works on special cases of the problem was carried out and the results are in excellent agreement. Results also show that the thermo physical parameters in the momentum boundary layer equations increase the skin friction coefficient but decrease the momentum boundary layer. Fluid suction/injection and Prandtl number increase the rate of heat transfer. The order of chemical reaction is quite significant and there is a faster rate of mass transfer when the reaction rate and Schmidt number are increased.

scholarly journals Influence of Couple Stresses and Thermophoresis on Free Convective Heat and Mass Transfer of Viscoelastic Fluid.

2020 ◽  
Vol 17 ◽  
pp. 50-63
Author(s):  
N. T. M. Eldabe ◽  
Ahmed Refaie Ali ◽  
Gamil Ali Shalaby
Keyword(s):  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Convective Heat ◽  
Newtonian Fluid ◽  
Numerical Solutions ◽  
Viscoelastic Model ◽  
Skin Friction Coefficient ◽  
Physical Parameters ◽  
Couple Stresses ◽  
Linear Differential

A theoretical study has been developed to investigate the influence of thermophoresis and couple stresses on the steady flow of non-Newtonian fluid with free convective heat and mass transfer over a channel bounded by two permeable plates. The considered non-Newtonian fluid follows a viscoelastic model. The problem is modulated mathematically by a system of non-linear differential equations pertaining to describe the continuity, momentum, energy, and concentration. These equations involve the effects of viscous dissipation and chemical reaction. The numerical solutions of the dimensionless equations are found as a function of the physical parameters of this problem. The numerical formulas of the velocity (u), temperature Φ and concentration Θ as well as skin friction coefficient T*, Nusselt number(Nu) and Sherwood number(Sh) are computed. The physical parameter's effects of the problem on these formulas are described and illustrated graphically through some figures and tables. It is observed that any increase in the thermophoretic parameter T leads to reduce in velocity profiles as well as concentration layers. In contrast, the velocity increases with increasing the couple stresses inverse parameter.

Hall and ion slip current’s impact on magneto-sodium alginate hybrid nanoliquid past a moving vertical plate with ramped heating, velocity slip and Darcy effects

2020 ◽  
Vol 17 (1) ◽  
pp. 65-101 ◽  
Author(s):  
A. Ali ◽  
Soma Mitra Banerjee ◽  
S. Das
Keyword(s):  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Sodium Alginate ◽  
Velocity Slip ◽  
Physical Parameters ◽  
Shear Stresses ◽  
Transform Method ◽  
Content Type ◽  
Slip Effects ◽  
Ion Slip

PurposeThe purpose of this study is to analyze an unsteady MHD Darcy flow of nonNewtonian hybrid nanoliquid past an exponentially accelerated vertical plate under the influence of velocity slip, Hall and ion slip effects in a rotating frame of reference. The fluids in the flow domain are assumed to be viscously incompressible electrically conducting. Sodium alginate (SA) has been taken as a base Casson liquid. A strong uniform magnetic field is applied under the assumption of low magnetic Reynolds number. Effect of Hall and ion-slip currents on the flow field is examined. The ramped heating and time-varying concentration at the plate are taken into consideration. First-order homogeneous chemical reaction and heat absorption are also considered. Copper and alumina nanoparticles are dispersed in base fluid sodium alginate to be formed as hybrid nanoliquid.Design/methodology/approachThe model problem is first formulated in terms of partial differential equations (PDEs) with physical conditions. Laplace transform method (LTM) is used on the nondimensional governing equations for their closed-form solution. Based on these results, expressions for nondimensional shear stresses, rate of heat and mass transfer are also determined. Graphical presentations are chalked out to inspect the impacts of physical parameters on the pertinent physical flow characteristics. Numerical values of the shear stresses, rate of heat and mass transfer at the plate are tabulated for various physical parameters.FindingsNumerical exploration reveals that a significant increase in the secondary flow (i.e. crossflow) near the plate is guaranteed with an augmenting in Hall parameter or ion slip parameter. MHD and porosity have an opposite effect on velocity component profiles for both types of nanoliquids. Result addresses that both shear stresses are strongly enhanced by the Casson effect. Also, hybrid nanosuspension in Casson fluid (sodium alginate) exhibits a lower rate of heat transfer than usual nanoliquid.Social implicationsThis model may be pertinent in cooling processes of metallic infinite plate in bath and hybrid magnetohydrodynamic (MHD) generators, metallurgical process, manufacturing dynamics of nanopolymers, magnetic field control of material processing, synthesis of smart polymers, making of paper and polyethylene, casting of metals, etc.Originality/valueThe originality of this study is to obtain an analytical solution of the modeled problem by using the Laplace transform method (LTM). Such an exact solution of nonNewtonian fluid flow, heat and mass transfer is rare in the literature. It is also worth remarking that the influence of Hall and ion slip effects on the flow of nonNewtonian hybrid nanoliquid is still an open question.

Sign in / Sign up

Export Citation Format

Share Document