scholarly journals Effect of Carbon Nanotube Size on Compressive Strengths of Nanotube Reinforced Cementitious Composites

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Tanvir Manzur ◽  
Nur Yazdani ◽  
Md. Abul Bashar Emon
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotube ◽  
High Performance ◽  
Construction Material ◽  
High Potential ◽  
Cement Matrix ◽  
Cementitious Composites ◽  
Cement Composites ◽  
Nanoscale Science ◽  
20 Nm

Application of nanoscale science to construction material has already begun. In recent times, various nanofibers have raised the interest of researchers due to their exceptional mechanical properties and high potential to be used as reinforcement within cement matrix. Carbon nanotube (CNT) is one of the most important areas of research in the field of nanotechnology. The size and exceptional mechanical properties of CNT show their high potential to be used to produce high performance next generation cementitious composites. In this study, an attempt has been made to investigate the effect of size of CNTs on compressive strengths of CNT reinforced cement composites. Seven different sizes of multiwalled nanotubes (MWNTs) were used to produce MWNT-cement composites. A trend was observed regarding the effect of nanotube size on compressive strength of composites in most cases. MWNT with outside diameter (OD) of 20 nm or less exhibited relatively better performance. Smaller MWNT can be distributed at much finer scale and consequently filling the nanopore space within the cement matrix more efficiently. This in turn resulted in stronger composites.

scholarly journals Preparation and Mechanical Properties of Graphene Oxide: Cement Nanocomposites

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Fakhim Babak ◽  
Hassani Abolfazl ◽  
Rashidi Alimorad ◽  
Ghodousi Parviz
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Graphene Oxide ◽  
Cement Mortar ◽  
Cement Matrix ◽  
Cement Composites ◽  
Xrd Diffraction ◽  
Calcium Silicate Hydrates ◽  
The Matrix ◽  
Scanning Electron

We investigate the performance of graphene oxide (GO) in improving mechanical properties of cement composites. A polycarboxylate superplasticizer was used to improve the dispersion of GO flakes in the cement. The mechanical strength of graphene-cement nanocomposites containing 0.1–2 wt% GO and 0.5 wt% superplasticizer was measured and compared with that of cement prepared without GO. We found that the tensile strength of the cement mortar increased with GO content, reaching 1.5%, a 48% increase in tensile strength. Ultra high-resolution field emission scanning electron microscopy (FE-SEM) used to observe the fracture surface of samples containing 1.5 wt% GO indicated that the nano-GO flakes were well dispersed in the matrix, and no aggregates were observed. FE-SEM observation also revealed good bonding between the GO surfaces and the surrounding cement matrix. In addition, XRD diffraction data showed growth of the calcium silicate hydrates (C-S-H) gels in GO cement mortar compared with the normal cement mortar.

scholarly journals Application of the nanoindentation method in assessing of properties of cement composites modified with silica-magnetite nanostructures

2018 ◽  
Vol 163 ◽  
pp. 02002 ◽  
Author(s):  
Elzbieta Horszczaruk ◽  
Roman Jedrzejewski ◽  
Jolanta Baranowska ◽  
Ewa Mijowska
Keyword(s):  
Mechanical Properties ◽  
Magnetite Nanoparticles ◽  
Positive Influence ◽  
Cement Matrix ◽  
Core Shell ◽  
Indentation Modulus ◽  
Cement Composites ◽  
Interfacial Zone ◽  
Berkovich Indenter ◽  
The Core

The results of investigation of the cement composites modified with 5% of silica-magnetite nanostructures of the core-shell type are presented in the paper. The nanoindentation method employing three-sided pyramidal Berkovich indenter was used in the research. The mechanical properties and microstructure of the modified cement composites were evaluated on the basis of the values of hardness and indentation modulus measured inside the cement matrix and in the aggregate-paste interfacial zone. The results were compared with those obtained for the reference composites without nanostructures. The positive influence of the presence of silica-magnetite nanoparticles on the tested properties was found out.

scholarly journals Nanocelluloses: Natural-Based Materials for Fiber-Reinforced Cement Composites. A Critical Review

Polymers ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 518 ◽  
Author(s):  
Ana Balea ◽  
Elena Fuente ◽  
Angeles Blanco ◽  
Carlos Negro
Keyword(s):  
Raw Material ◽  
Modulus Of Rupture ◽  
Cement Matrix ◽  
Future Research ◽  
Cementitious Composites ◽  
Natural Material ◽  
Cement Composites ◽  
Fiber Reinforced ◽  
Industrial Sectors ◽  
Reinforced Cement

Nanocelluloses (NCs) are bio-based nano-structurated products that open up new solutions for natural material sciences. Although a high number of papers have described their production, properties, and potential applications in multiple industrial sectors, no review to date has focused on their possible use in cementitious composites, which is the aim of this review. It describes how they could be applied in the manufacturing process as a raw material or an additive. NCs improve mechanical properties (internal bonding strength, modulus of elasticity (MOE), and modulus of rupture (MOR)), alter the rheology of the cement paste, and affect the physical properties of cements/cementitious composites. Additionally, the interactions between NCs and the other components of the fiber cement matrix are analyzed. The final result depends on many factors, such as the NC type, the dosage addition mode, the dispersion, the matrix type, and the curing process. However, all of these factors have not been studied in full so far. This review has also identified a number of unexplored areas of great potential for future research in relation to NC applications for fiber-reinforced cement composites, which will include their use as a surface treatment agent, an anionic flocculant, or an additive for wastewater treatment. Although NCs remain expensive, the market perspective is very promising.

scholarly journals Tribological Characterization of Carbon Nanotube/Aluminum Functionally Graded Materials Fabricated by Centrifugal Slurry Methods

2021 ◽  
Vol 5 (10) ◽  
pp. 254
Author(s):  
Hideaki Tsukamoto
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotube ◽  
Functionally Graded Materials ◽  
Potassium Carbonate ◽  
High Performance ◽  
Functionally Graded ◽  
Graded Materials ◽  
Tribological Characterization ◽  
Al Matrix

Although carbon nanotube (CNT) is a promising material due to its excellent mechanical and functional properties, CNT has not been effectively used for high performance composites due to the degradation of its mechanical properties as a result of insufficient dispersibility of CNT in its matrix. In this study, CNT/aluminum (Al) matrix functionally graded materials (FGMs) were fabricated by centrifugal slurry methods. The dispersion of CNT was carried out with the solvent of dimethylacetamide (DMAs), and the dispersant of potassium carbonate (K2CO3) under ultrasonic sonication conditions. Tribological characteristics on the FGMs were investigated using a ball-on-disk tribometer. It was demonstrated that the presence of CNT contributed to an increase of the coefficients of friction and an enhancement of wear resistances.

Research Progress on Carbon Nanotubes Reinforced Cement-Based Materials

2014 ◽  
Vol 629-630 ◽  
pp. 487-493
Author(s):  
Bao Min Wang ◽  
Shuai Liu ◽  
Yu Han
Keyword(s):  
Carbon Nanotubes ◽  
High Performance ◽  
Weight Fraction ◽  
Research Field ◽  
Research Progress ◽  
Cement Matrix ◽  
Cement Composites ◽  
Mechanical Stirring ◽  
Cement Based Materials ◽  
Reinforced Cement

For their remarkable properties, carbon nanotubes (CNTs) are considered as promising candidate for next generation of high performance and functional cement-based composites in 21st century. The paper focuses on the dispersibility, mechanical property, durability, conductivity and piezoresistivity properties of CNTs reinforced cement-based materials. A homogenous CNTs-suspension was obtained using the method which combined ultrasonic processing with mechanical stirring, electric-field introduction and surfactant decoration. The low weight fraction of CNTs improved the mechanical properties of CNTs/cement composites. The compressive strength and toughness were correspondingly improved. The added CNTs improved the sulfate attack resistance and impermeability properties of the prepared CNTs/cement mixes. Meanwhile, the added CNTs improved the pressure-sensitive, conductivity and electromagnetic absorption properties of the prepared mixes, which laid a foundation of multi-functional concrete and structure. It concludes that the key issue for CNTs/cement composites is the dispersibility and the compatibility of CNTs in cement matrix. The solving solutions are put forward. In the meantime, the further research prospects in this research field are forecasted.

Mechanical Properties Research on Concrete Block Doped Nano-TiO2 under the Conditions of Common Conservation

2012 ◽  
Vol 238 ◽  
pp. 9-12
Author(s):  
Zhi Yong Deng
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
Construction Material ◽  
Concrete Strength ◽  
High Strength ◽  
Concrete Block ◽  
Compressive Properties ◽  
Compressive Test ◽  
High Durability

As a new high performance construction material, concrete doped nano-TiO2 greatly expanded its application in engineering with the advantages of high strength and high durability. By compressive test of concrete block doped nano-TiO2 under the conditions of common conservation, this paper respectively studies the regulation of compressive properties of the concrete block affected by the factors such as concrete strength and nano-TiO2 dioxide.

scholarly journals Damping Property of a Cement-Based Material Containing Carbon Nanotube

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Wei-Wen Li ◽  
Wei-Ming Ji ◽  
Yi Liu ◽  
Feng Xing ◽  
Yu-Kai Liu
Keyword(s):  
Carbon Nanotube ◽  
Cement Paste ◽  
Load Transfer ◽  
Cement Composite ◽  
Mechanical Analysis ◽  
Cement Matrix ◽  
Cement Composites ◽  
Strength Index ◽  
Damping Property ◽  
Reduction Capacity

This study aimed to explore the damping property of a cement-based material with carbon nanotube (CNT). In the study, the cement composites with different contents of CNT (0 wt%, 0.033 wt%, 0.066 wt%, and 0.1 wt%) were investigated. Logarithmic Decrement method and Dynamic Mechanical Analysis (DMA) method were utilized to study the damping property of CNT/cement composite. The influences of CNT on pore size distribution and microstructure of composite were analyzed by Mercury Intrusion Porosimetry (MIP) and Scanning Electron Microscopy (SEM), respectively. The experimental results showed that CNT/cement composite presented higher flexural strength index than that of a pure cement paste. Additional CNT could improve the vibration-reduction capacity of cement paste. Furthermore, the experiments proved that CNT could bridge adjacent hydration products and support load transfer within cement matrix, which contributed to the energy dissipation during the loading process.

Sign in / Sign up

Export Citation Format

Share Document