scholarly journals Image-Based Structural Modeling of the Cardiac Purkinje Network

2015 ◽  
Vol 2015 ◽  
pp. 1-15 ◽  
Author(s):  
Benjamin R. Liu ◽  
Elizabeth M. Cherry
Keyword(s):  
Ventricular Arrhythmias ◽  
Experimental Studies ◽  
Three Dimensional ◽  
Structural Models ◽  
Imaging Data ◽  
Purkinje System ◽  
Combined Models ◽  
Physical Limitations ◽  
Flat Networks ◽  
Purkinje Network

The Purkinje network is a specialized conduction system within the heart that ensures the proper activation of the ventricles to produce effective contraction. Its role during ventricular arrhythmias is less clear, but some experimental studies have suggested that the Purkinje network may significantly affect the genesis and maintenance of ventricular arrhythmias. Despite its importance, few structural models of the Purkinje network have been developed, primarily because current physical limitations prevent examination of the intact Purkinje network. In previous modeling efforts Purkinje-like structures have been developed through either automated or hand-drawn procedures, but these networks have been created according to general principles rather than based on real networks. To allow for greater realism in Purkinje structural models, we present a method for creating three-dimensional Purkinje networks based directly on imaging data. Our approach uses Purkinje network structures extracted from photographs of dissected ventricles and projects these flat networks onto realistic endocardial surfaces. Using this method, we create models for the combined ventricle-Purkinje system that can fully activate the ventricles through a stimulus delivered to the Purkinje network and can produce simulated activation sequences that match experimental observations. The combined models have the potential to help elucidate Purkinje network contributions during ventricular arrhythmias.

The functional vascular anatomy of the swine for research

Vascular ◽  
2021 ◽  
pp. 170853812199650
Author(s):  
Joseph Edwards ◽  
Hossam Abdou ◽  
Neerav Patel ◽  
Marta J Madurska ◽  
Kelly Poe ◽  
...  
Keyword(s):  
Translational Research ◽  
Functional Anatomy ◽  
Three Dimensional ◽  
Vascular Anatomy ◽  
Review Article ◽  
Imaging Data ◽  
Preclinical Research ◽  
Iodinated Contrast ◽  
Translational Research Program ◽  
And Function

Objectives Swine ( Sus Scrofa) are utilized broadly in research settings, given similarities to human vessel size and function; however, there are some important differences for clinicians to understand in order to interpret and perform translational research. This review article uses angiograms acquired in the course of a translational research program to present a description of the functional anatomy of the swine. Methods Digital subtraction angiography and computed tomography angiography were obtained throughout the course of multiple studies utilizing power injection with iodinated contrast. Subtracted two-dimensional images and three-dimensional multiplanar reformations were utilized post image acquisition to create maximal intensity projections and three-dimensional renderings of using open-source software (OsiriX). These imaging data are presented along with vessel measurements for reference. Results An atlas highlighting swine vascular anatomy, with an emphasis on inter-species differences that may influence how studies are conducted and interpreted, was compiled. Conclusions Swine are utilized in broad-reaching fields for preclinical research. While many similarities between human and swine vasculature exist, there are important differences to consider when conducting and interpreting research. This review article highlights these differences and presents accompanying images to inform clinicians gaining experience in swine research.

scholarly journals Targeting hepatocyte growth factor in epithelial–stromal interactions in an in vitro experimental model of human periodontitis

Odontology ◽  
2021 ◽  
Author(s):  
Yoko Yamaguchi ◽  
Akira Saito ◽  
Masafumi Horie ◽  
Akira Aoki ◽  
Patrick Micke ◽  
...  
Keyword(s):  
Growth Factor ◽  
Hepatocyte Growth Factor ◽  
Experimental Studies ◽  
Three Dimensional ◽  
Collagen Gel ◽  
Neutralizing Antibody ◽  
Chronic Inflammatory Disease ◽  
Collagen Degradation ◽  
Hepatocyte Growth

AbstractPeriodontitis is a chronic inflammatory disease leading to progressive connective tissue degradation and loss of the tooth-supporting bone. Clinical and experimental studies suggest that hepatocyte growth factor (HGF) is involved in the dysregulated fibroblast–epithelial cell interactions in periodontitis. The aim of this study was to explore effects of HGF to impact fibroblast-induced collagen degradation. A patient-derived experimental cell culture model of periodontitis was applied. Primary human epithelial cells and fibroblasts isolated from periodontitis-affected gingiva were co-cultured in a three-dimensional collagen gel. The effects of HGF neutralizing antibody on collagen gel degradation were tested and transcriptome analyses were performed. HGF neutralizing antibody attenuated collagen degradation and elicited expression changes of genes related to extracellular matrix (ECM) and cell adhesion, indicating that HGF signaling inhibition leads to extensive impact on cell–cell and cell–ECM interactions. Our study highlights a potential role of HGF in periodontitis. Antagonizing HGF signaling by a neutralizing antibody may represent a novel approach for periodontitis treatment.

scholarly journals Numerical and Experimental Studies on a Three-Dimensional Numerical Wave Tank

IEEE Access ◽  
2018 ◽  
Vol 6 ◽  
pp. 6585-6593 ◽  
Author(s):  
Xiaojie Tian ◽  
Qingyang Wang ◽  
Guijie Liu ◽  
Wei Deng ◽  
Zhiming Gao
Keyword(s):  
Experimental Studies ◽  
Three Dimensional ◽  
Numerical Wave Tank ◽  
Wave Tank ◽  
Numerical Wave

scholarly journals Application of 3D printed model for planning the endoscopic endonasal transsphenoidal surgery

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Xing Huang ◽  
Ni Fan ◽  
Hai-jun Wang ◽  
Yan Zhou ◽  
Xudong Li ◽  
...  
Keyword(s):  
3D Printing ◽  
Skull Base ◽  
Transsphenoidal Surgery ◽  
Three Dimensional ◽  
Spatial Relationship ◽  
Cranial Computed Tomography ◽  
Imaging Data ◽  
Endoscopic Endonasal ◽  
Endoscopic Endonasal Transsphenoidal Surgery

AbstractThe application of 3D printing in planning endoscopic endonasal transsphenoidal surgery is illustrated based on the analysis of patients with intracranial skull base diseases who received treatment in our department. Cranial computed tomography/magnetic resonance imaging data are attained preoperatively, and three-dimensional reconstruction is performed using MIMICS (Materialise, Leuven, Belgium). Models of intracranial skull base diseases are printed using a 3D printer before surgery. The models clearly demonstrate the morphologies of the intracranial skull base diseases and the spatial relationship with adjacent large vessels and bones. The printing time of each model is 12.52–15.32 h, and the cost ranges from 900 to 1500 RMB. The operative approach was planned in vitro, and patients recovered postoperatively well without severe complications or death. In a questionnaire about the application of 3D printing, experienced neurosurgeons achieved scores of 7.8–8.8 out of 10, while unexperienced neurosurgeons achieved scores of 9.2–9.8. Resection of intracranial skull base lesions is demonstrated to be well assisted by 3D printing technique, which has great potential in disclosing adjacent anatomical relationships and providing the required help to clinical doctors in preoperative planning.

Numerical Modeling of Tube Hydropiercing Using Phenomenological and Micro-Mechanical Damage Criteria

2013 ◽  
Vol 549 ◽  
pp. 172-179 ◽  
Author(s):  
Amir Hassannejadasl ◽  
Daniel E. Green
Keyword(s):  
Experimental Studies ◽  
Three Dimensional ◽  
Equivalent Plastic Strain ◽  
Mechanical Damage ◽  
High Strength ◽  
Dimensional Finite Element ◽  
Steel Dp600 ◽  
Three Dimensional Finite Element ◽  
Jc Model ◽  
Damage Criteria

Hydropiercing is an efficient way of piercing holes in mass produced hydroformed parts with complex geometries. By driving piercing punches radially into a hydroformed and fully pressurized tube, holes will be pierced and extruded into the tube-wall. Recent experimental studies have shown that the formability of advanced high strength steel (AHSS) tubes can be increased with the application of internal pressure. In this study, three-dimensional finite element simulations of a tube hydropiercing process of a dual phase steel (DP600) were performed in LS-DYNA, using phenomenological, micromechanical and combined damage criteria. Damage was included in the numerical analysis by applying constant equivalent plastic strain (CEPS), the Gurson-Tvergaard-Needleman (GTN), and the Extended GTN (GTN+JC) model. In order to calibrate the parameters in each model, a specialized hole-piercing fixture was designed and piercing tests were carried out on non-pressurized tube specimens. Of the various ductile fracture criteria, the results predicted with the GTN+JC model, such as the punch load-displacement, the roll-over depth, and the quality of the clearance zone correlated the best with the experimental data.

Fracture Mechanics of Thin Plates and Shells Under Combined Membrane, Bending, and Twisting Loads

2005 ◽  
Vol 58 (1) ◽  
pp. 37-48 ◽  
Author(s):  
Alan T. Zehnder ◽  
Mark J. Viz
Keyword(s):  
Fracture Mechanics ◽  
Plate Theory ◽  
Experimental Studies ◽  
Three Dimensional ◽  
Crack Tip ◽  
Thin Plates ◽  
Element Analysis ◽  
Crack Tip Fields ◽  
Plates And Shells ◽  
Membrane Bending

The fracture mechanics of plates and shells under membrane, bending, twisting, and shearing loads are reviewed, starting with the crack tip fields for plane stress, Kirchhoff, and Reissner theories. The energy release rate for each of these theories is calculated and is used to determine the relation between the Kirchhoff and Reissner theories for thin plates. For thicker plates, this relationship is explored using three-dimensional finite element analysis. The validity of the application of two-dimensional (plate theory) solutions to actual three-dimensional objects is analyzed and discussed. Crack tip fields in plates undergoing large deflection are analyzed using von Ka´rma´n theory. Solutions for cracked shells are discussed as well. A number of computational methods for determining stress intensity factors in plates and shells are discussed. Applications of these computational approaches to aircraft structures are examined. The relatively few experimental studies of fracture in plates under bending and twisting loads are also reviewed. There are 101 references cited in this article.

An efficient approach to converting three-dimensional image data into highly accurate computational models

2008 ◽  
Vol 366 (1878) ◽  
pp. 3155-3173 ◽  
Author(s):  
P.G Young ◽  
T.B.H Beresford-West ◽  
S.R.L Coward ◽  
B Notarberardino ◽  
B Walker ◽  
...  
Keyword(s):  
Mesh Generation ◽  
Computational Models ◽  
Three Dimensional ◽  
Image Data ◽  
Model Material ◽  
Imaging Data ◽  
Material Inhomogeneity ◽  
Dimensional Image ◽  
Wide Range ◽  
Impact Modelling

Image-based meshing is opening up exciting new possibilities for the application of computational continuum mechanics methods (finite-element and computational fluid dynamics) to a wide range of biomechanical and biomedical problems that were previously intractable owing to the difficulty in obtaining suitably realistic models. Innovative surface and volume mesh generation techniques have recently been developed, which convert three-dimensional imaging data, as obtained from magnetic resonance imaging, computed tomography, micro-CT and ultrasound, for example, directly into meshes suitable for use in physics-based simulations. These techniques have several key advantages, including the ability to robustly generate meshes for topologies of arbitrary complexity (such as bioscaffolds or composite micro-architectures) and with any number of constituent materials (multi-part modelling), providing meshes in which the geometric accuracy of mesh domains is only dependent on the image accuracy (image-based accuracy) and the ability for certain problems to model material inhomogeneity by assigning the properties based on image signal strength. Commonly used mesh generation techniques will be compared with the proposed enhanced volumetric marching cubes (EVoMaCs) approach and some issues specific to simulations based on three-dimensional image data will be discussed. A number of case studies will be presented to illustrate how these techniques can be used effectively across a wide range of problems from characterization of micro-scaffolds through to head impact modelling.

Noninvasive three-dimensional electrocardiographic imaging of ventricular activation sequence

2005 ◽  
Vol 289 (6) ◽  
pp. H2724-H2732 ◽  
Author(s):  
Xin Zhang ◽  
Indiresha Ramachandra ◽  
Zhongming Liu ◽  
Basharat Muneer ◽  
Steven M. Pogwizd ◽  
...  
Keyword(s):  
Surface Potential ◽  
Body Surface ◽  
Cardiac Arrhythmias ◽  
Experimental Studies ◽  
Three Dimensional ◽  
Electrocardiographic Imaging ◽  
Ventricular Activation ◽  
Body Surface Potential ◽  
Life Threatening ◽  
Activation Sequence

Imaging the myocardial activation sequence is critical for improved diagnosis and treatment of life-threatening cardiac arrhythmias. It is desirable to reveal the underlying cardiac electrical activity throughout the three-dimensional (3-D) myocardium (rather than just the endocardial or epicardial surface) from noninvasive body surface potential measurements. A new 3-D electrocardiographic imaging technique (3-DEIT) based on the boundary element method (BEM) and multiobjective nonlinear optimization has been applied to reconstruct the cardiac activation sequences from body surface potential maps. Ultrafast computerized tomography scanning was performed for subsequent construction of the torso and heart models. Experimental studies were then conducted, during left and right ventricular pacing, in which noninvasive assessment of ventricular activation sequence by means of 3-DEIT was performed simultaneously with 3-D intracardiac mapping (up to 200 intramural sites) using specially designed plunge-needle electrodes in closed-chest rabbits. Estimated activation sequences from 3-DEIT were in good agreement with those constructed from simultaneously recorded intracardiac electrograms in the same animals. Averaged over 100 paced beats (from a total of 10 pacing sites), total activation times were comparable (53.3 ± 8.1 vs. 49.8 ± 5.2 ms), the localization error of site of initiation of activation was 5.73 ± 1.77 mm, and the relative error between the estimated and measured activation sequences was 0.32 ± 0.06. The present experimental results demonstrate that the 3-D paced ventricular activation sequence can be reconstructed by using noninvasive multisite body surface electrocardiographic measurements and imaging of heart-torso geometry. This new 3-D electrocardiographic imaging modality has the potential to guide catheter-based ablative interventions for the treatment of life-threatening cardiac arrhythmias.

Sign in / Sign up

Export Citation Format

Share Document