scholarly journals Decoration of Silver Nanoparticles on Multiwalled Carbon Nanotubes: Antibacterial Mechanism and Ultrastructural Analysis

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Ngo Xuan Dinh ◽  
Nguyen Van Quy ◽  
Tran Quang Huy ◽  
Anh-Tuan Le
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Silver Nanoparticles ◽  
Cell Membrane ◽  
Multiwalled Carbon Nanotubes ◽  
Ultrastructural Changes ◽  
Physical Interaction ◽  
Ag Nps ◽  
Multiwalled Carbon ◽  
Membrane Function

Recently, development of carbon nanocomposites composed of carbon nanostructures and metal nanoparticles has attracted much interests because of their large potential for technological applications such as catalyst, sensor, biomedicine, and disinfection. In this work, we established a simple chemistry method to synthesize multiwalled carbon nanotubes (MWCNTs) decorated with silver nanoparticles (Ag-NPs) using a modified photochemical reaction (Tollens process). The formation and interaction of Ag-NPs with functionalized groups on the surface of MWCNTs were analyzed by X-ray diffraction, transmission electron microscopy, Raman spectroscopy, and Fourier-transform infrared spectroscopy. The average size of Ag-NPs on the MWCNTs was approximately ~7 nm with nearly uniform size distribution. Antibacterial effect of Ag-MWCNTs nanocomposites was evaluated against two pathogenic bacteria including Gram-negativeEscherichia Coliand Gram-positiveStaphylococcus aureusbacteria. Interaction and bactericidal mechanism of Ag-MWCNTs with tested bacteria was studied by adapting the electron microscopy. Analysis on ultrastructural changes of bacterial cells indicates that antibacterial action mechanism of Ag-MWCNTs is physical interaction with cell membrane, the large formation of cell-Ag-MWCNTs aggregates, and faster destructibility of cell membrane and disruption of membrane function, hence resulting in cells death.

Comparative evaluation of half-maximum inhibitory concentration and cytotoxicity of silver nanoparticles and multiwalled carbon nanotubes using buffalo bull spermatozoa as a cell model

2018 ◽  
Vol 34 (9) ◽  
pp. 640-652 ◽  
Author(s):  
Sandhya Sanand ◽  
Sandeep Kumar ◽  
Nisha Bara ◽  
Gautam Kaul
Keyword(s):  
Oxidative Stress ◽  
Carbon Nanotubes ◽  
Silver Nanoparticles ◽  
Multiwalled Carbon Nanotubes ◽  
Inhibitory Concentration ◽  
Membrane Integrity ◽  
Time Interval ◽  
Half Maximum ◽  
Ag Nps ◽  
Multiwalled Carbon

There is a dearth of information regarding the safety of silver nanoparticles (Ag NPs) and multiwalled carbon nanotubes (MWCNTs) with respect to their impact on human/animal health and the environment. This study aimed to determine the half-maximum inhibitory concentration (IC50) of Ag NPs and MWCNTs by employing different doses and time interval combinations in buffalo bull spermatozoa. Semen samples containing 100 million spermatozoa each were incubated with 1, 10, 25, 50, 75 and 100 µg/mL of Ag NPs and MWCNTs at 37°C for 30, 60 and 120 min. Sperm viability was monitored by the MTT assay and eosin–nigrosin staining followed by estimation of IC50 values using correlation–regression analysis. Spermatozoa treated with IC50 doses of Ag NPs and MWCNTs were also assessed for different sperm functionality parameters including oxidative stress and membrane integrity. These parameters were observed to be significantly affected in treated spermatozoa compared with the controls. We concluded that both nanomaterials showed cytotoxicity, mediated principally via oxidative stress. This work has provided valuable toxicological information that will serve as a benchmark for future studies aimed at safe use of nanomaterials.

scholarly journals Temperature Dependence of Sensors Based on Silver-Decorated Nitrogen-Doped Multiwalled Carbon Nanotubes

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Eduardo Gracia-Espino ◽  
Bernabé Rebollo-Plata ◽  
Hugo Martínez-Gutiérrez ◽  
Emilio Muñoz-Sandoval ◽  
Florentino López-Urías ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Multiwalled Carbon Nanotubes ◽  
Density Functional ◽  
Chemical Vapor ◽  
Ag Nps ◽  
Multiwalled Carbon ◽  
Detection Mechanism ◽  
Nitrogen Doped ◽  
Vapor Sensors

Vapor sensors are easily fabricated onto alumina substrates using foils of silver-decorated nitrogen-doped multiwalled carbon nanotubes (CNX-MWNTs-Ag) as active sensing material. The vapor sensors are tested using carbon disulfide, acetone, ethanol, and chloroform vapors. The CNX-MWNTs are produced by chemical vapor deposition process and then decorated with 14 nm Ag nanoparticles (Ag-NPs). The samples are characterized using scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. Our results demonstrate that Ag-decorated CNX-MWNTs exhibit a better response and sensitivity when compared with pristine CNX-MWNTs based sensors, making them promising candidates for air-pollutants environmental monitoring. The temperature effect on the sensor performance is also studied; we found that the detection mechanism could be tuned from physisorption, at room temperature, to chemisorption at higher working temperature. Finally, first-principles density functional calculations are carried out to understand the interactions between the systems involved in the sensors, finding good agreement between experimental results and the theoretical approach.

SILK FIBROIN FILMS CRYSTALLIZED BY MULTIWALLED CARBON NANOTUBES

2008 ◽  
Vol 22 (09n11) ◽  
pp. 1807-1812 ◽  
Author(s):  
H.-S. KIM ◽  
W.-I. PARK ◽  
Y. KIM ◽  
H.-J. JIN
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Multiwalled Carbon Nanotubes ◽  
Silk Fibroin ◽  
Composite Films ◽  
Tensile Modulus ◽  
Multiwalled Carbon ◽  
Regenerated Silk Fibroin ◽  
Silk Films ◽  
Β Sheet

Silk films prepared from regenerated silk fibroin are normally stabilized by β-sheet formation through the use of solvents (methanol, water etc.). Herein, we report a new method of preparing water-stable films without a β-sheet conformation from regenerated silk fibroin solutions by incorporating a small amount (0.2 wt%) of multiwalled carbon nanotubes (MWCNTs). To extend the biomaterial utility of silk proteins, forming water-stable silk-based materials with enhanced mechanical properties is essential. Scanning electron microscopy and transmission electron microscopy were used to observe the morphology of the MWCNT-incorporated silk films. The wide-angle X-ray diffraction provided clear evidence of the crystallization of the silk fibroin induced by MWCNT in the composite films without any additional annealing processing. The tensile modulus and strength of the composite films were improved by 108% and 51%, respectively, by the incorporation of 0.2 wt% of MWCNTs, as compared with those of the pure silk films. The method described in this study will provide an alternative means of crystallizing silk fibroin films without using an organic solvent or blending with any other polymers, which may be important in biomedical applications.

scholarly journals Surface Properties of Silica–MWCNTs/PDMS Composite Coatings Deposited on Plasma Activated Glass Supports

2021 ◽  
Vol 11 (19) ◽  
pp. 9256
Author(s):  
Michał Chodkowski ◽  
Iryna Ya. Sulym ◽  
Konrad Terpiłowski ◽  
Dariusz Sternik
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Scanning Electron Microscopy ◽  
Multiwalled Carbon Nanotubes ◽  
Composite Coatings ◽  
Thermal Analyses ◽  
Sol Gel ◽  
Visible Range ◽  
Multiwalled Carbon ◽  
Scanning Electron

In this paper, we focus on fabrication and physicochemical properties investigations of silica–multiwalled carbon nanotubes/poly(dimethylsiloxane) composite coatings deposited on the glass supports activated by cold plasma. Air or argon was used as the carrier gas in the plasma process. Multiwalled carbon nanotubes were modified with poly(dimethylsiloxane) in order to impart their hydrophobicity. The silica–multiwalled carbon nanotubes/poly(dimethylsiloxane) nanocomposite was synthesized using the sol–gel technique with acid-assisted tetraethyl orthosilicate hydrolysis. The stability and the zeta potential of the obtained suspension were evaluated. Then, the product was dried and used as a filler in another sol–gel process, which led to the coating application via the dip-coating method. The substrates were exposed to the hexamethyldisilazane vapors in order to improve their hydrophobicity. The obtained surfaces were characterized by the wettability measurements and surface free energy determination as well as optical profilometry, scanning electron microscopy, and transmittance measurements. In addition, the thermal analyses of the carbon nanotubes as well as coatings were made. It was found that rough and hydrophobic coatings were obtained with a high transmittance in the visible range. They are characterized by the water contact angle larger than 90 degrees and the transmission at the level of 95%. The X-ray diffraction studies as well as scanning electron microscopy images confirmed the chemical and structural compositions of the coatings. They are thermally stable at the temperature up to 250 °C. Moreover, the thermal analysis showed that the obtained composite material has greater thermal resistance than the pure nanotubes.

Covalent functionalization of multiwalled carbon nanotubes with super-hydrophobic property

2018 ◽  
Vol 38 (6) ◽  
pp. 537-543 ◽  
Author(s):  
Minghua Li ◽  
Zhiyuan Xu ◽  
Jinyang Chen ◽  
San-E Zhu
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Multiwalled Carbon Nanotubes ◽  
Chemical Interaction ◽  
Hydrophobic Property ◽  
Covalent Functionalization ◽  
Multiwalled Carbon ◽  
Surface Contact Angle ◽  
Loading Ratio ◽  
Functionalized Mwcnts

AbstractSurface covalent functionalization of multiwalled carbon nanotubes (MWCNTs) is carried out by coupling of isocyanate-decorated MWCNTs with hydroxyl-terminated polydimethylsiloxane (HTPS), resulting in the formation of functionalized MWCNTs. Thermogravimetry analysis (TGA) of functionalized MWCNTs-1,2,3 exhibits the similar peaks in the temperature range of 200–500°C, which all correspond to the degradation of chemically grafted polyurethane on the nanotube surface. Field emission scanning electron microscopy (FE-SEM) reveals that as the polyurethane grafted onto the surface of MWCNTs loading ratio increased, the surface roughness of the MWCNTs is reduced. The chemical interaction of HTPS with isocyanate-decorated nanotube surface using the grafting-to strategy in a one-step process is confirmed by Fourier transform infrared spectroscopy (FT-IR). The surface contact angle of MWCNTs-3 with the largest content of polyurethane reached 171°, indicating that the surface covered with low surface energy polyurethane shows a super-hydrophobic property. The good dispersion of polyurethane-functionalized MWCNT-3, particularly at high content in the NR nanocomposites, is evidenced from transmission electron microscopy (TEM).

Morphology and thermal properties of nanocomposites based on chiral poly(ester-imide) matrix reinforced by vitamin B1 functionalized multiwalled carbon nanotubes

2016 ◽  
Vol 51 (16) ◽  
pp. 2291-2300 ◽  
Author(s):  
Shadpour Mallakpour ◽  
Samaneh Soltanian
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Multiwalled Carbon Nanotubes ◽  
Vitamin B1 ◽  
Multiwalled Carbon ◽  
Transmission Electron ◽  
Functionalized Multiwalled Carbon Nanotubes ◽  
Scanning Electron

Chemical functionalization of carboxylated multiwalled carbon nanotubes with vitamin B1 was carried out under ultrasonic irradiation. The functionalized nanotubes were embedded in a chiral and biodegradable poly(ester-imide) to prepare multiwalled carbon nanotubes reinforced polymer nanocomposites. Optically active poly(ester-imide) was synthesized by step-growth polymerization of aromatic diol and amino acid based diacid. The vitamin B1 functionalized multiwalled carbon nanotubes and the resulting nanocomposites were examined using Fourier-transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction, transmission electron microscopy, and field-emission scanning electron microscopy. Thermogravimetric analysis results indicated that temperature at 10% weight loss was increased from 409℃ for pure PEI to 419℃, 427℃, and 430℃ for nanocomposites containing 5%, 10%, and 15% functionalized multiwalled carbon nanotubes, respectively. The Fourier-transform scanning electron microscopy and transmission electron microscopy images exhibited that the functionalized multiwalled carbon nanotubes were separated individually and enwrapped by polymer chains.

scholarly journals One-Step Route to Synthesize Multiwalled Carbon Nanotubes Filled with MgO Nanorods

2010 ◽  
Vol 2010 ◽  
pp. 1-5 ◽  
Author(s):  
Jing Liu ◽  
Chunli Guo ◽  
Xiaojian Ma ◽  
Changhui Sun ◽  
Fengxia Li ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Transmission Electron Microscopy ◽  
Multiwalled Carbon Nanotubes ◽  
Multiwalled Carbon ◽  
X Ray ◽  
Transmission Electron ◽  
Good Crystallinity ◽  
One Step ◽  
Walled Cnts

Multiwalled carbon nanotubes filled with MgO nanorods were synthesized through the reaction of ethanol and Mg powder in the presence ofTiO2at 400C°. X-ray powder diffraction indicated that the sample was composed of graphite and cubic MgO. Transmission electron microscopy studies showed that multi-walled CNTs with the outer diameters of 70–130 nm were filled with discontinuous MgO nanorods whose diameter was in the range of 25–40 nm. The ratios of the band intensities(ID/IG=0.67)in Raman spectrum implied that carbon nanotubes had good crystallinity. The influence of correlative reaction factors on the morphology of the sample and the possible formation mechanism were discussed.

Corrosion characteristics of an automotive coolant formulation dispersed with nanomaterials

2019 ◽  
Vol 37 (3) ◽  
pp. 245-257
Author(s):  
Sriganesh Gandham ◽  
V. Choudhary Nettem ◽  
V.C. Rao Peddy ◽  
Rajiv Kumar T. A. ◽  
Srinivas Vadapalli
Keyword(s):  
Carbon Nanotubes ◽  
Weight Loss ◽  
Silver Nanoparticles ◽  
Corrosion Resistance ◽  
Ethylene Glycol ◽  
Multiwalled Carbon Nanotubes ◽  
Multiwalled Carbon ◽  
Automotive Systems ◽  
Alumina Particles ◽  
Surface Modified

AbstractThis paper summarizes the anti-corrosive and anti-erosive properties of water-ethylene glycol based commercial coolant dispersed with nanomaterials. Multiwalled carbon nanotubes (MWCNTs), silver nanoparticles (Ag) and nanosized alumina particles (Al2O3) are dispersed in 0.5% weight in automotive coolants and tested for anti-corrosive properties as per ASTM standards. Prior to dispersion, the nanomaterials are surface modified to get good stability in coolant solutions. The corrosion resistance is measured in terms of weight loss of materials that is commonly used in automotive systems. It is found that oxidized MWCNTs are suitable to automotive systems while silver and Al2O3 nanoparticles are found to be deleterious in nature.

Sign in / Sign up

Export Citation Format

Share Document