scholarly journals A Simple and Convenient Method for Simultaneous Determination ofSchizandrol A,Schizandrol B,Schisandrin A,γ-Schisandrin, andSchisandrin C

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Yu Zhou ◽  
Wu Ling Wei ◽  
Jiang Xing Hua ◽  
Qingsheng Fan
Keyword(s):  
Simultaneous Determination ◽  
Flow Rate ◽  
Convenient Method ◽  
Mobile Phase ◽  
Gradient Elution ◽  
Hplc Method ◽  
Schisandra Chinensis ◽  
Column Temperature

A simple, rapid, and specific HPLC method was established for simultaneous determination of five major lignans (Schizandrol A,Schizandrol B,Schisandrin A,γ-Schisandrin, andSchisandrin C) inSchisandra chinensis. The five lignans can be separated completely on Kromasil C18column (250 nm × 4.6 nm) and then detected at 254 nm using methanol (mobile phase A) and water (mobile phase B) with gradient elution as the mobile phase at 1.0 mL/min flow rate. The column temperature was 30°C. The method was validated in terms of linearity, precision, stability, repeatability, and recovery. Results showed that the method is accurate and reproducible.

Determination of Paeoniflorin and Paeonol in Houyinan Tablet by UPLC

2012 ◽  
Vol 581-582 ◽  
pp. 68-72
Author(s):  
Chu Qin Yu ◽  
Hua Qing Lin ◽  
Yue Han Hou ◽  
Zhong Feng Shi ◽  
Di Shi Lin
Keyword(s):  
Quality Control ◽  
Simultaneous Determination ◽  
Flow Rate ◽  
Mobile Phase ◽  
Gradient Elution ◽  
The Other ◽  
Column Temperature ◽  
Average Recovery ◽  
Injection Volume

In this study, our purpose was to establish a UPLC method for the simultaneous determination of Paeoniflorin and Paeonol in Houyinan Tablet. The separation was performed on Acquity BEH C18 column(2.1mm×100mm,1.7μm), the mobile phase was acetonitrile-water with gradient elution at a flow rate of 0.2 mL•min-1, the detection wavelength was 230nm, the column temperature was 30°Cand the injection volume was 2μL. Paeoniflorin and Paeonol reached effective separation with the other components in this chromatographic conditions. Paeoniflorin and Paeonol were linear within the range of 0.0406~0.4064μg(r=0.9999) and 0.0426~0.4256μg (r=0.9999), respectively. The average recovery was 99.82% and 100.6%. The results of method validation indicated that the method was simple,quick,accurate, specific and less solvent consumption. It can be used for the quality control of Houyinan Tablet.

scholarly journals Development and Validation of HPLC Method for the Simultaneous Determination of Five Food Additives and Caffeine in Soft Drinks

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Bürge Aşçı ◽  
Şule Dinç Zor ◽  
Özlem Aksu Dönmez
Keyword(s):  
Simultaneous Determination ◽  
Flow Rate ◽  
Mobile Phase ◽  
High Performance ◽  
Food Additives ◽  
Hplc Method ◽  
Soft Drinks ◽  
Phase Ratio ◽  
Potassium Sorbate

Box-Behnken design was applied to optimize high performance liquid chromatography (HPLC) conditions for the simultaneous determination of potassium sorbate, sodium benzoate, carmoisine, allura red, ponceau 4R, and caffeine in commercial soft drinks. The experimental variables chosen were pH (6.0–7.0), flow rate (1.0–1.4 mL/min), and mobile phase ratio (85–95% acetate buffer). Resolution values of all peak pairs were used as a response. Stationary phase was Inertsil OctaDecylSilane- (ODS-) 3V reverse phase column (250 × 4.6 mm, 5 μm) dimensions. The detection was performed at 230 nm. Optimal values were found 6.0 pH, 1.0 mL/min flow rate, and 95% mobile phase ratio for the method which was validated by calculating the linearity (r2>0.9962), accuracy (recoveries ≥ 95.75%), precision (intraday variation ≤ 1.923%, interday variation ≤ 1.950%), limits of detection (LODs), and limits of quantification (LOQs) parameters. LODs and LOQs for analytes were in the range of 0.10–0.19 μg/mL and 0.33–0.63 μg/mL, respectively. The proposed method was applied successfully for the simultaneous determination of the mixtures of five food additives and caffeine in soft drinks.

scholarly journals HPLC method for simultaneous determination of impurities and degradation products in Cardiazol

Pharmacia ◽  
2020 ◽  
Vol 67 (1) ◽  
pp. 29-37
Author(s):  
Iryna Drapak ◽  
Borys Zimenkovsky ◽  
Liudas Ivanauskas ◽  
Ivan Bezruk ◽  
Lina Perekhoda ◽  
...  
Keyword(s):  
Flow Rate ◽  
Mobile Phase ◽  
Degradation Products ◽  
Phase 1 ◽  
Simultaneous Detection ◽  
Hplc Method ◽  
Column Temperature ◽  
Degree Of Separation ◽  
Determination Of Impurities

Aim. The aim of study was to develop a simple and accurate procedure that could be applied for the determination of impurities and degradation products in cardiazol. Materials and methods. Separation in samples was carried out with Acquity H-class UPLC system (Waters, Milford, USA) equipped with Acquity UPLC BEH C18 column (2.1 × 50 mm, 1.7 μm) (Waters, Milford, USA). Xevo TQD triple quadrupole mass spectrometer detector (Waters Millford, USA) was used to obtain MS/MS data. Mobile phase A: 0.1% solution of trifluoroacetic acid R in water R; Mobile phase B: acetonitrile R. Samples were chromatographed in gradient mode (Table 1). Flow rate of the mobile phase: 1 ml / min. Column temperature: 30 °С. Detection: at 240 nm wavelength. Injection volume: 10 μl. Results. The retention time of the main substance is about 18.5 minutes. The order of the peak, the retention times and relative retention times: impurity B (12.04, 0.65); impurity А (18.5; 0.98); Cardiazol (18.87; 1.00). The LOD and LOQ values obtained were in the range of 30 ng/mL to 100 ng/mL and 80 ng/mL to 310 ng/mL respectively (with respect to sample concentration of 2 mg/ml). Linearity was established in the range of LOQ level to 0.2% having regression coefficients in the range of 0.9996 to 0.9999. The change in the temperature of the column affects the degree of separation of cardiazol and the impurity A, and thus, with a decrease of 5 ° C, the degree of separation is (1.06), while with increasing this index (3.43). When changing the flow rate of the mobile phase, the degree of separation changes in the following order, with a decrease to 0.9 ml / min separation (1.90), with an increase in speed to 1.1 ml / min (2.45). When the number of mobile phase B decreases by 5%, the degree of separation varies by (2.65), with an increase of 5% (1.82). In comparison with the chromatogram of the tested solution, the substance is not resistant to the action of peroxide, alkaline and acid decomposition. Conclusion. 1) HPLC method was developed and validated for the simultaneous detection and quantitation of impurities formed during the synthesis of cardiazol. 2) The method proved to be sensitive, selective, precise, linear, accurate and stability-indicating.

scholarly journals THE OPTIMIZATION OF HPLC FOR QUANTITATIVE ANALYSIS OF ACID ORANGE 7 AND SUDAN II IN COSMETIC PRODUCTS USING BOX BEHNKEN DESIGN

2019 ◽  
pp. 130-137 ◽  
Author(s):  
NOVALINA BR PURBA ◽  
ABDUL ROHMAN ◽  
SUDIBYO MARTONO
Keyword(s):  
Flow Rate ◽  
Retention Time ◽  
Mobile Phase ◽  
High Performance ◽  
Hplc Method ◽  
Acid Orange 7 ◽  
Column Temperature ◽  
Box Behnken Design ◽  
Acid Orange

Objective: The objective of this study was to optimize high-performance liquid chromatography (HPLC) method for the determination of acid orange 7 (AO7) and sudan II (SII) in blusher product based on response surface methodology using box behnken design (BBD) approach. Methods: Some factors responsible for HPLC separation including column temperature, mobile phase composition, flow rate were optimized using BBD. The responses evaluated were peak area, retention time, and tailing factor. AO7 and SII in blusher product has different properties, therefore both analytes were analysed using C18 column (Thermo Synergy Gold 250 mm x 4.6 mm i.d.,5 µm) using Shimadzu LC 20AD chromatograph equipped with photo-diode array (PDA) detector at 300-650 nm. The mobile phase used was acetonitrile-water (1:1 v/v), and acetonitrile composition was optimized at 35-50% for separation AO7 (ACN1), and 80-90% for SII (ACN2), delivered at the flow rate of 0.9–1 ml/min, using column temperature at 30-40 °C. Results: BBD showed that separation of AO7 was influenced by the concentration of ACN1, flow rate and column temperature. These factors affected retention time, peak area, and tailing factor with peak area was the most significant. Tailing factor was not significantly affected by each factor, and retention time was slightly effected. Otherwise, Sudan II was affected by all these factors except ACN1. The optimal condition obtained based BBD was ACN1 43%, ACN2 90%, the flow rate of 0.9 ml/min and a column temperature of 40 °C. Conclusion: BBD can be used to get optimum condition for analysis of AO7 and SII in blusher product.

scholarly journals Application of RP-HPLC method for the simultaneous determination of cetirizine in the presence of quinolones

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Hina Shamshad ◽  
Agha Zeeshan Mirza
Keyword(s):  
Human Serum ◽  
Simultaneous Determination ◽  
Flow Rate ◽  
Mobile Phase ◽  
Diclofenac Sodium ◽  
Internal Standard ◽  
Hplc Method ◽  
Rp Hplc ◽  
Ich Guidelines

Abstract Background Present work describes a fast, simple, and sensitive procedure for the simultaneous determination of cetirizine in the presence of quinolones using diclofenac sodium as an internal standard. The present work was designed to analyze these compounds in pharmaceutical and clinical labs being economical for use. Results The mobile phase consisted of the simple composition of methanol, acetonitrile, and water in a ratio of 50:20:30 with a pH adjusted to 3.1 at a flow rate of 1 mL min−1. The UV detection was performed at 225 nm. The linearity was assessed over the range of 2.5–50 μg mL−1 for all drugs. The parameters such as accuracy, precision, linearity (>0.999), and sensitivity were satisfactory. Conclusion The method was equally applicable for formulation and human serum with recovery values between 95 and 105%. The results of the method were validated statistically according to ICH guidelines.

scholarly journals Experimental design approach for the development and validation of an enantiospecific RP-HPLC method for simultaneous determination of clopidogrel and related compounds

2008 ◽  
Vol 27 (1) ◽  
pp. 53 ◽  
Author(s):  
Rumenka Petkovska ◽  
Claus Cornett ◽  
Aneta Dimitrovska
Keyword(s):  
Experimental Design ◽  
Simultaneous Determination ◽  
Mobile Phase ◽  
Hplc Method ◽  
System Response ◽  
Buffer Solution ◽  
Column Temperature ◽  
Rp Hplc ◽  
Related Compounds

An enantiospecific RP-HPLC method was developed and validated for the simultaneous determination of clopidogrel and four related compounds specified as impurities. Experimental design was applied during the method optimization (Full factorial 23 design) and robustness testing (Central Composite Face Centered design). Laboratory mixtures of clopidogrel and its impurities in a concentration ratio of 1: 5.0×10–4 were used as an investigation matrix. The three independent variables were the acetonitrile content in the mobile phase, pH of the mobile phase, and the column temperature. A Chromatographic Response Function (CRF) was used for estimation of the system response resolution (Rs). Separation was achieved using mobile phase composition of ACN: Buffer solution pH 6.5 (40:60 v/v) at 30 ºC. A CHIRAL-AGP 4.0 mm × 100 mm, 5.0 μm particle size column was used. The total time for chromatographic separation was approximately 10.0 min. The method was validated for its selectivity, linearity, precision, accuracy and robustness.

scholarly journals Optimization of RP-HPLC method with UV detection for determination of ursodeoxycholic acid in pharmaceutical formulations

2020 ◽  
Vol 66 (1) ◽  
pp. 85-90
Author(s):  
Zhaklina Poposka Svirkova ◽  
Zorica Arsova-Sarafinovska ◽  
Aleksandra Grozdanova
Keyword(s):  
Ursodeoxycholic Acid ◽  
Flow Rate ◽  
Mobile Phase ◽  
Pharmaceutical Formulations ◽  
Gradient Elution ◽  
Hplc Method ◽  
Uv Detection ◽  
Rp Hplc ◽  
Ich Guidelines

Due to the low absorptivity of bile acids, the aim of this study was to develop and validate a simple and sensitive HPLC/UV method for quantification of ursodeoxycholic acid (UDCA) in pharmaceutical formulations. Effective separation was achieved on C18 end–capped column, with gradient elution of a mobile phase composed of 0.001 M phosphate buffer (pH 2.8±0.5) – acetonitrile mix, at flow rate 1.5 mL min-1, UV detection at 200 nm and injection volumes were 50 µL. The proposed HPLC method was fully validated according to the ICH guidelines and it was found to be simple, accurate, precise and robust. Key words: ursodeoxycholic acid, HPLC/UV, pharmaceutical formulations, validation

scholarly journals RP-HPLC Method Development and Validation for the Estimation of Lansoprazole in Presence of Related Substances by QbD Approach

2021 ◽  
pp. 138-150
Author(s):  
Sachin B. Gholve ◽  
Jaiprakash N. Sangshetti ◽  
Omprakash G. Bhusnure ◽  
Ram S. Sakhare ◽  
Pratap H. Bhosale ◽  
...  
Keyword(s):  
Flow Rate ◽  
Mobile Phase ◽  
Method Development ◽  
Hplc Method ◽  
Drug Substance ◽  
Gastric Ulcers ◽  
Mobile Phase Flow Rate ◽  
Column Temperature ◽  
Rp Hplc

A rapid specific RP-HPLC method has been developed for the determination of Lansoprazole impurities in the drug substance. The control of pharmaceutical impurities is currently a critical issue in the pharmaceutical industry. The International Council for Harmonization (ICH) has formulated a workable guideline regarding the control of impurities. The objective of the recent study was to develop and validate a HPLC method for the quantitative determination of process-related impurities of Lansoprazole in pharmaceutical drug substance. Lansoprazole, 2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl] methyl]-sulfinyl]- 1H-benzimidazole is an proton pump inhibitor used in the management of gastric ulcers. Chromatographic identification of the impurities was carried out by response surface methodology, applying a three-level Box Behnken design with three center points. Three factors selected were a mobile phase, flow rate, column temperature. Evaluation of the main factor, their interaction, and the quadric effect on peak resolution were done on Waters Symmetry C8, 250 x 4.6mm, 5µm column is used for the development of the method. The mobile phase consists of buffer and acetonitrile. The flow rate of the mobile phase was 1.0 ml/min with gradient elution. The column temperature is ambient and the detection wavelength is 235 nm. The injection volume was 10 µL. The method was validated as per ICH guidelines for linearity in the range of 50-150 µg/ml and the LOD & LOQ values obtained were 0.437×10-4 and 0.1325×10-3 µg/ml respectively which specifies the method's sensitivity. The proposed method was successfully used to determine the Lansoprazole impurities in drug substances.

Simultaneous Determination of Oleanolic Acid and Ursolic Acid in Leaves of Paulownia by HPLC

2013 ◽  
Vol 781-784 ◽  
pp. 787-791 ◽  
Author(s):  
Ya Li Xing ◽  
Liang Wu Bi ◽  
Zhen Dong Zhao ◽  
Tian Juan Xia
Keyword(s):  
Phosphoric Acid ◽  
Simultaneous Determination ◽  
Ursolic Acid ◽  
Oleanolic Acid ◽  
Flow Rate ◽  
Mobile Phase ◽  
Leaf Extract ◽  
Hplc Method ◽  
Simultaneous Quantification

A quick and accurate HPLC method has been developed for the simultaneous quantification of two bioactive triterpenes, ursolic acid and oleanolic acid in Paulownia leaves. The samples were analyzed on a Shim-pack ODS-CLC (M) (4.6 mm × 250 mm, 5 μm) column kept at 21 °C, using the methanol and aqueous phase containing 0.05%phosphoric acid with the volumetric ratio of 91.7:8.3 as the mobile phase at a flow rate of 0.6 mL/ min, and the detection wavelength was set at 210 nm. The method was validated and applied to the simultaneous quantification of the two triterpenes in Paulownia leaf extract. The standard curves were established in the range of 0.44 ~ 8.75 μg for oleanolic acid and 0.92 ~ 18.37 μg for ursolic acid. The contents of oleanolic acid and ursolic acid in leaves of Paulownia were determinated using the HPLC method and the contents were 3.87 mg/g and 13.61 mg/g, respectively.

scholarly journals RP-HPLC Method for Simultaneous Determination of Butenafine Hydrochloride and Betamethasone Dipropionate in a Cream Formulation

2011 ◽  
Vol 94 (1) ◽  
pp. 106-109 ◽  
Author(s):  
Suryakant D Bhosale ◽  
Sadhana J Rajput
Keyword(s):  
Simultaneous Determination ◽  
Flow Rate ◽  
Mobile Phase ◽  
Hplc Method ◽  
Betamethasone Dipropionate ◽  
Phase Gradient ◽  
Simultaneous Quantification ◽  
Cream Formulation ◽  
Rp Hplc

Abstract An RP-HPLC method has been developed for the simultaneous determination of butenafine hydrochloride and betamethasone dipropionate on an Inertsil C18 column (250×4.6 mm id) using a mobile phase gradient consisting of methanol and water at a flow rate of 1 mL/min. Detection was carried out at 254 nm. Retention times of betamethasone dipropionate and butenafine hydrochloride were 4.82 (±0.80) and 16.18 (±0.17) min, respectively. The method was validated with respect to specificity, linearity, accuracy, precision, ruggedness, and robustness. This method is simple, precise, and sensitive, and applicable for the simultaneous quantification of butenafine hydrochloride and betamethasone dipropionate in a cream formulation.

Sign in / Sign up

Export Citation Format

Share Document