scholarly journals Near-Infrared Spectroscopy Combined with Multivariate Calibration to Predict the Yield of Sesame Oil Produced by Traditional Aqueous Extraction Process

2017 ◽  
Vol 2017 ◽  
pp. 1-5
Author(s):  
Yong-Dong Xu ◽  
Yan-Ping Zhou ◽  
Jing Chen
Keyword(s):  
Near Infrared ◽  
Multivariate Calibration ◽  
Nir Spectroscopy ◽  
Extraction Process ◽  
Sesame Oil ◽  
Aqueous Extraction ◽  
Oil Yield ◽  
Support Vector ◽  
Calibration Model ◽  
Aqueous Extraction Process

Sesame oil produced by the traditional aqueous extraction process (TAEP) has been recognized by its pleasant flavor and high nutrition value. This paper developed a rapid and nondestructive method to predict the sesame oil yield by TAEP using near-infrared (NIR) spectroscopy. A collection of 145 sesame seed samples was measured by NIR spectroscopy and the relationship between the TAEP oil yield and the spectra was modeled by least-squares support vector machine (LS-SVM). Smoothing, taking second derivatives (D2), and standard normal variate (SNV) transformation were performed to remove the unwanted variations in the raw spectra. The results indicated that D2-LS-SVM (4000–9000 cm−1) obtained the most accurate calibration model with root mean square error of prediction (RMSEP) of 1.15 (%, w/w). Moreover, the RMSEP was not significantly influenced by different initial values of LS-SVM parameters. The calibration model could be helpful to search for sesame seeds with higher TAEP oil yields.

scholarly journals Determination of the Lignocellulosic Components of Olive Tree Pruning Biomass by Near Infrared Spectroscopy

Energies ◽  
2019 ◽  
Vol 12 (13) ◽  
pp. 2497 ◽  
Author(s):  
José Luis Fernández ◽  
Felicia Sáez ◽  
Eulogio Castro ◽  
Paloma Manzanares ◽  
Mercedes Ballesteros ◽  
...  
Keyword(s):  
Near Infrared ◽  
Multivariate Calibration ◽  
Chemical Characterization ◽  
Nir Spectroscopy ◽  
Olive Tree ◽  
Calibration Method ◽  
Calibration Model ◽  
Alternative Method ◽  
Tree Pruning

The determination of chemical composition of lignocellulose biomass by wet chemistry analysis is labor-intensive, expensive, and time consuming. Near infrared (NIR) spectroscopy coupled with multivariate calibration offers a rapid and no-destructive alternative method. The objective of this work is to develop a NIR calibration model for olive tree lignocellulosic biomass as a rapid tool and alternative method for chemical characterization of olive tree pruning over current wet methods. In this study, 79 milled olive tree pruning samples were analyzed for extractives, lignin, cellulose, hemicellulose, and ash content. These samples were scanned by reflectance diffuse near infrared techniques and a predictive model based on partial least squares (PLS) multivariate calibration method was developed. Five parameters were calibrated: Lignin, cellulose, hemicellulose, ash, and extractives. NIR models obtained were able to predict main components composition with R2cv values over 0.5, except for lignin which showed lowest prediction accuracy.

scholarly journals Nonlinear Multivariate Calibration of Shelf Life of Preserved Eggs (Pidan) by Near Infrared Spectroscopy: Stacked Least Squares Support Vector Machine with Ensemble Preprocessing

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Lu Xu ◽  
Si-Min Yan ◽  
Chen-Bo Cai ◽  
Xiao-Ping Yu ◽  
Jian-Hui Jiang ◽  
...  
Keyword(s):  
Support Vector Machine ◽  
Shelf Life ◽  
Least Squares ◽  
Nonlinear Model ◽  
Near Infrared ◽  
Multivariate Calibration ◽  
Data Preprocessing ◽  
Computational Time ◽  
Support Vector ◽  
Calibration Model

This paper aims at developing a rapid and nondestructive method for analyzing the shelf life of preserved eggs (pidan) by near infrared (NIR) spectroscopy and nonlinear multivariate calibration. A major concern with a nonlinear model is that the noncomposition-correlated spectral variations among pidan objects of different batches and production dates would unnecessarily increase model complexity and cause overfitting and degradation of prediction. To reduce the negative influence of unwanted spectral variations, stacked least squares support vector machine (LS-SVM) with an ensemble of 62 commonly used preprocessing methods is proposed to automatically optimize data preprocessing and develop the nonlinear model. The analysis results indicate that stacked LS-SVM can obtain stable calibration model, and the prediction accuracy is improved compared with models with single-preprocessing methods. Since LS-SVM is much faster than its ordinary counterparts, stacked LS-SVM with ensemble preprocessing can be performed within an acceptable computational time. When the objects and spectral variations are very complex, the proposed method can provide a useful tool for data preprocessing and nonlinear multivariate calibration.

Essential Oil Yield in Rosewood (Aniba Rosaeodora Ducke): Initial Application of Rapid Prediction by near Infrared Spectroscopy Based on Wood Spectra

2016 ◽  
Vol 24 (6) ◽  
pp. 507-515 ◽  
Author(s):  
Nadine Amusant ◽  
Jacques Beauchène ◽  
Alexis Digeon ◽  
Gilles Chaix
Keyword(s):  
Essential Oil ◽  
Near Infrared ◽  
Management Strategies ◽  
Nir Spectroscopy ◽  
Quality Parameters ◽  
Oil Yield ◽  
Yield Potential ◽  
Calibration Model ◽  
Wood Powder ◽  
Essential Oil Yield

Rosewood ( Aniba rosaeodora) essential oil is a valuable ingredient that has long been used in the perfume and cosmetic industries. The main rosewood timber quality parameters are its essential oil yield and quality. A hydrodistillation method has been developed for yield determination, but it is time consuming. Here we tested the applicability of near infrared (NIR) spectroscopy for determining essential oil yield directly from wood powder. Essential oil from 139 wood powders was extracted via hydrodistillation. The measurements were based on the ratio between the extracted essential oil mass and the oven-dried wood mass and were correlated with the wood powder NIR spectra. The calibration model statistical findings demonstrated that NIR could be a fast and feasible alternative method for selecting trees with a high essential oil yield potential. NIR-based predictions obtained in an independent validation set indicated a high correlation ( r2 = 0.92) with laboratory essential oil yield measurements. This NIR model could help wood managers in selecting trees with a high essential oil yield potential and in developing sustainable rosewood management strategies.

Calibration Transfer and Measurement Stability of Near-Infrared Spectrometers

1992 ◽  
Vol 46 (5) ◽  
pp. 764-771 ◽  
Author(s):  
Yongdong Wang ◽  
Bruce R. Kowalski
Keyword(s):  
Near Infrared ◽  
Multivariate Calibration ◽  
Process Analysis ◽  
Starch Content ◽  
Industrial Process ◽  
Nir Spectroscopy ◽  
Calibration Model ◽  
Calibration Transfer ◽  
Small Set ◽  
Transfer Method

Near-infrared (NIR) spectroscopy has been widely accepted as a quantitative technique in which multivariate calibration plays an important role. The application of NIR to process analysis, however, has been largely limited by a problem identified as calibration transfer, the attempt to transfer a well-established calibration model from one instrument (e.g., located in the central laboratory) to another instrument of the same type (e.g., located on an industrial process). A calibration transfer method called piecewise direct standardization (PDS) is applied to a set of gasoline samples measured on two different NIR spectrometers. On the basis of the measurement of a small set of transfer samples on both instruments, a structured transformation matrix can be determined and applied to transform spectra between two instruments, enabling the transfer of calibration models. The effect of spectrum preprocessing on standardization is studied with the use of a set of gasoline samples. In a separate study, the day-to-day instrument variation as observed from the change in the polystyrene spectrum is related to the prediction of moisture, oil, protein, and starch content in corn samples, and then the possibility of using such generic standards to replace real samples in a transfer set is explored. In all cases, a standard error for prediction comparable to full set cross-validation is obtained through standardization.

scholarly journals Cancer Discrimination Using Fourier Transform Near-Infrared Spectroscopy with Chemometric Models

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Hui Chen ◽  
Zan Lin ◽  
Chao Tan
Keyword(s):  
Cancer Diagnosis ◽  
Near Infrared ◽  
Nir Spectroscopy ◽  
Principal Component ◽  
Classification Model ◽  
Support Vector ◽  
Biomedical Analysis ◽  
First Derivative ◽  
Svm Model ◽  
High Prediction

Near-infrared (NIR) spectroscopy technique offers many potential advantages as tool for biomedical analysis since it enables the subtle biochemical signatures related to pathology to be detected and extracted. In conjunction with advanced chemometrics, NIR spectroscopy opens the possibility of their use in cancer diagnosis. The study focuses on the application of near-infrared (NIR) spectroscopy and classification models for discriminating colorectal cancer. A total of 107 surgical specimens and a corresponding NIR diffuse reflection spectral dataset were prepared. Three preprocessing methods were attempted and least-squares support vector machine (LS-SVM) was used to build a classification model. The hybrid preprocessing of first derivative and principal component analysis (PCA) resulted in the best LS-SVM model with the sensitivity and specificity of 0.96 and 0.96 for the training and 0.94 and 0.96 for test sets, respectively. The similarity performance on both subsets indicated that overfitting did not occur, assuring the robustness and reliability of the developed LS-SVM model. The area of receiver operating characteristic (ROC) curve was 0.99, demonstrating once again the high prediction power of the model. The result confirms the applicability of the combination of NIR spectroscopy, LS-SVM, PCA, and first derivative preprocessing for cancer diagnosis.

Visible/Near infrared (VIS/NIR) spectroscopy and multivariate data analysis (MVDA) for identification and quantification of olive leaf spot (OLS) disease

2014 ◽  
Vol 2 (1) ◽  
pp. 1-9
Author(s):  
Nawaf Abu-Khalaf ◽  
Mazen Salman
Keyword(s):  
Leaf Spot ◽  
Near Infrared ◽  
Latent Infection ◽  
Linear Method ◽  
Nir Spectroscopy ◽  
Support Vector ◽  
Olive Leaf ◽  
Classification Rate ◽  
Infection Period ◽  
Linear Svm

Early detection of plant disease requires usually elaborating methods techniques and especially when symptoms are not visible. Olive Leaf Spot (OLS) infecting upper surface of olive leaves has a long latent infection period. In this work, VIS/NIR spectroscopy was used to determine the latent infection and severity of the pathogens. Two different classification methods were used, Partial Least Squared-Discrimination Analysis (PLS-DA) (linear method) and Support Vector Machine (SVM) (non-linear). SVM-classification was able to classify severity levels 0, 1, 2, 3, 4, and 5 with classification rates of 94, 90, 73, 79, 83 and 100%, respectively The overall classification rate was about 86%. PLS-DA was able to classify two different severity groups (first group with severity 0, 1, 2, 3, and second group with severity 4, 5), with a classification rate greater than 95%. The results promote further researches, and the possibility of evaluation OLS in-situ using portable VIS/NIR devices.

Visible/Near infrared (VIS/NIR) spectroscopy and multivariate data analysis (MVDA) for identification and quantification of olive leaf spot (OLS) disease

2014 ◽  
Vol 2 (1) ◽  
pp. 1-9
Author(s):  
Nawaf Abu-Khalaf ◽  
Mazen Salman
Keyword(s):  
Leaf Spot ◽  
Near Infrared ◽  
Latent Infection ◽  
Linear Method ◽  
Nir Spectroscopy ◽  
Support Vector ◽  
Olive Leaf ◽  
Classification Rate ◽  
Infection Period ◽  
Linear Svm

Early detection of plant disease requires usually elaborating methods techniques and especially when symptoms are not visible. Olive Leaf Spot (OLS) infecting upper surface of olive leaves has a long latent infection period. In this work, VIS/NIR spectroscopy was used to determine the latent infection and severity of the pathogens. Two different classification methods were used, Partial Least Squared-Discrimination Analysis (PLS-DA) (linear method) and Support Vector Machine (SVM) (non-linear). SVM-classification was able to classify severity levels 0, 1, 2, 3, 4, and 5 with classification rates of 94, 90, 73, 79, 83 and 100%, respectively The overall classification rate was about 86%. PLS-DA was able to classify two different severity groups (first group with severity 0, 1, 2, 3, and second group with severity 4, 5), with a classification rate greater than 95%. The results promote further researches, and the possibility of evaluation OLS in-situ using portable VIS/NIR devices.

Sign in / Sign up

Export Citation Format

Share Document