scholarly journals Protonation and Photocatalytic Activity of the Rb2La2Ti3O10 Layered Oxide in the Reaction of Hydrogen Production

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Ivan A. Rodionov ◽  
Iuliia P. Sokolova ◽  
Oleg I. Silyukov ◽  
Alena A. Burovikhina ◽  
Sergey A. Fateev ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Cell Parameter ◽  
X Ray Diffraction ◽  
Initial Compound ◽  
Solid State Method ◽  
X Ray ◽  
Layered Oxide ◽  
Intermediate Phases ◽  
Water Contents ◽  
Protonation Degree

The Rb2La2Ti3O10 layered oxide was synthesized by the solid-state method. Three phases with different protonation degrees and intercalated water contents were obtained from the initial compound by the treatment with distilled water and hydrochloric acid. The obtained samples were characterized by powder X-ray diffraction, SEM, X-ray microanalysis, BET, DRS, and TG. It was found that the complete ion exchange of Rb+ for H+ in the layered oxide Rb2La2Ti3O10 proceeds through the formation of two metastable intermediate phases with average protonation degrees of 0.5 and 0.75, which successively transform from one to another. Each of these phase transformations is accompanied not only by the contraction of the interlayer distance but also by the displacement of adjacent perovskite layers by 1/2 of the cell parameter which results in the change in the space group. The photocatalytic activity of obtained samples decreases with the increase in the protonation degree, which correlates with the decrease in the intercalated water content.

Preparation and Photocatalytic Study of Nano Cadmium Sulphide

2012 ◽  
Vol 584 ◽  
pp. 406-410 ◽  
Author(s):  
S. Ershadul Haque ◽  
B. Ramdas ◽  
A. Sheela
Keyword(s):  
Photocatalytic Activity ◽  
Room Temperature ◽  
Diffuse Reflectance ◽  
Uv Light ◽  
Cadmium Sulphide ◽  
Spectroscopic Techniques ◽  
X Ray Diffraction ◽  
Solid State Method ◽  
Sunlight Irradiation ◽  
X Ray

Nano CdS has been prepared by solid state method at room temperature in the absence of any surfactants or dopants. It is characterized by powder X-ray diffraction, scanning electron microscopy (SEM) and diffuse reflectance spectroscopic techniques. It shows cubic structure with the particle size ranging about 20nm. It also exhibits a strong photocatalytic activity for the decomposition of methyl orange (MO) and rhodamine B (RB) under UV and sunlight irradiation. The result shows that CdS exerts greater photocatalytic activity for MO (83%) and RB (73%) under sunlight than UV light.

Electron Microscopy/Diffraction Study of the Ternary Mn-Er-S System

1990 ◽  
Vol 48 (1) ◽  
pp. 76-77
Author(s):  
A. R. Landa Canovas ◽  
L.C. Otero Diaz ◽  
T. White ◽  
B.G. Hyde
Keyword(s):  
Electron Microscopy ◽  
Gas Flow ◽  
Graphite Crucible ◽  
Nominal Composition ◽  
X Ray Diffraction ◽  
Alumina Crucible ◽  
X Ray ◽  
Intermediate Phases ◽  
Twin Band ◽  
Ar Gas

X-Ray diffraction revealed two intermediate phases in the system MnS+Er2S3,:MnEr2S4= MnS.Er2S3, and MnEr4S7= MnS.2Er2S3. Their structures may be described as NaCl type, chemically twinned at the unit cell level, and isostructural with CaTi2O4, and Y5S7 respectively; i.e. {l13} NaCl twin band widths are (4,4) and (4,3).The present study was to search for structurally-related (twinned B.) structures and or possible disorder, using the more sensitive and appropiate technigue of electron microscopy/diffraction.A sample with nominal composition MnEr2S4 was made by heating Mn3O4 and Er2O3 in a graphite crucible and a 5% H2S in Ar gas flow at 1500°C for 4 hours. A small amount of this material was thenannealed, in an alumina crucible, contained in sealed evacuated silica tube, for 24 days at 1100°C. Both samples were studied by X-ray powder diffraction, and in JEOL 2000 FX and 4000 EX microscopes.

Photocatalytic activity of TiO2 synthesized by anodization and anodic spark deposition

MRS Advances ◽  
2020 ◽  
Vol 5 (61) ◽  
pp. 3141-3152
Author(s):  
Alma C. Chávez-Mejía ◽  
Génesis Villegas-Suárez ◽  
Paloma I. Zaragoza-Sánchez ◽  
Rafael Magaña-López ◽  
Julio C. Morales-Mejía ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Surface Characteristics ◽  
Amorphous Solids ◽  
X Ray Diffraction ◽  
X Ray ◽  
Catalytic Activities ◽  
Anodic Spark Oxidation ◽  
Porous Surfaces ◽  
Scanning Electron

AbstractSeveral photocatalysts, based on titanium dioxide, were synthesized by spark anodization techniques and anodic spark oxidation. Photocatalytic activity was determined by methylene blue oxidation and the catalytic activities of the catalysts were evaluated after 70 hours of reaction. Scanning Electron Microscopy and X Ray Diffraction analysis were used to characterize the catalysts. The photocatalyst prepared with a solution of sulfuric acid and 100 V presented the best performance in terms of oxidation of the dye (62%). The electric potential during the synthesis (10 V, low potential; 100 V, high potential) affected the surface characteristics: under low potential, catalyst presented smooth and homogeneous surfaces with spots (high TiO2 concentration) of amorphous solids; under low potential, catalyst presented porous surfaces with crystalline solids homogeneously distributed.

scholarly journals Photocurrent density and electrical properties of Bi0.5Na0.5TiO3-BaNi0.5Nb0.5O3 ceramics

2021 ◽  
Author(s):  
Mingqiang Zhong ◽  
Qin Feng ◽  
Changlai Yuan ◽  
Xiao Liu ◽  
Baohua Zhu ◽  
...  
Keyword(s):  
Electrical Properties ◽  
Photovoltaic Effect ◽  
Short Circuit ◽  
Short Circuit Current ◽  
Photocurrent Density ◽  
Open Circuit ◽  
Light Conditions ◽  
X Ray Diffraction ◽  
Solid State Method ◽  
X Ray

AbstractIn this work, the (1−x)Bi0.5Na0.5TiO3-xBaNi0.5Nb0.5O3 (BNT-BNN; 0.00 ⩽ x ⩽ 0.20) ceramics were prepared via a high-temperature solid-state method. The crystalline structures, photovoltaic effect, and electrical properties of the ceramics were investigated. According to X-ray diffraction, the system shows a single perovskite structure. The samples show the normal ferroelectric loops. With the increase of BNN content, the remnant polarization (Pr) and coercive field (Ec) decrease gradually. The optical band gap of the samples narrows from 3.10 to 2.27 eV. The conductive species of grains and grain boundaries in the ceramics are ascribed to the double ionized oxygen vacancies. The open-circuit voltage (Voc) of ∼15.7 V and short-circuit current (Jsc) of ∼1450 nA/cm2 are obtained in the 0.95BNT-0.05BNN ceramic under 1 sun illumination (AM1.5G, 100 mW/cm2). A larger Voc of 23 V and a higher Jsc of 5500 nA/cm2 are achieved at the poling field of 60 kV/cm under the same light conditions. The study shows this system has great application prospects in the photovoltaic field.

Photocatalytic Activity of Fe-Doped ZnO/Montmorillonite Nanocomposite for Degradation of Malachite Green

2015 ◽  
Vol 827 ◽  
pp. 19-24 ◽  
Author(s):  
Nur Afifah ◽  
Nadia Febiana Djaja ◽  
Rosari Saleh
Keyword(s):  
Photocatalytic Activity ◽  
Malachite Green ◽  
Organic Dyes ◽  
Uv Light ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Spin Resonance ◽  
Doped Zno ◽  
Co Precipitation

In this study, the photocatalytic activity of pure Fe- doped ZnO and Fe- doped ZnO/Montmorillonite nanocomposite has been investigated for the degradation of malachite green under UV light irradiation. Both photocatalysts were synthesized using co-precipitation method and characterized by X-ray diffraction, energy dispersive X-ray spectroscopy, Fourier-transform infrared absorption, and electron spin resonance. The results showed that the photocatalytic efficiency is better in the presence of montmorillonite compared to pure Fe- doped ZnO. To detect the possible reactive species involved in degradation of organic dyes control experiments with introducing scavengers into the solution of organic dyes were carried out. It is found that electron plays an important role in the degradation of malachite green.

Preparation of Visible-Light-Responsive TiO2-xNx Photocatalyst by a Very Simple Method

2011 ◽  
Vol 383-390 ◽  
pp. 3188-3191
Author(s):  
Han Jie Huang ◽  
Wen Long She ◽  
Ling Wen Yang ◽  
Hai Peng Huang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflection ◽  
Ammonia Solution ◽  
Reflection Spectra ◽  
X Ray Diffraction ◽  
Simple Method ◽  
X Ray ◽  
Light Excitation

A visible-light-responsive TiO2-xNx photocatalyst was prepared by a very simple method. Ammonia solution was used as nitrogen resource in this paper. The TiO2-xNx photocatalyst was characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), UV-Vis diffuse reflection spectra (DRS), and X-ray photoelectron spectroscopy (XPS). The ethylene was selected as a target pollutant under visible light excitation to evaluate the activity of this photocatalyst. The new prepared TiO2-xNx photocatalyst with strong photocatalytic activity under visible light irradiation was demonstrated in the experiment.

Facile Solid State Method Route Synthesis and Enhance Visible Light Activities of BiVO4 by Doping Co

2016 ◽  
Vol 703 ◽  
pp. 316-320
Author(s):  
Hai Feng Chen ◽  
Jing Ling Hu ◽  
Bing Xu
Keyword(s):  
Solid State ◽  
Visible Light ◽  
Catalytic Effect ◽  
Catalytic Properties ◽  
Raw Materials ◽  
X Ray Diffraction ◽  
Solid State Method ◽  
Illumination Time ◽  
X Ray ◽  
State Method

Using NH4VO3, Bi (NO3)3•5H2O and Co (NO3)2•6H2O as raw materials, Co doped BiVO4 (Co/BiVO4) photocatalysts were successfully prepared by solid state method. And the photo catalytic properties were test in this work. Crystal structures of these samples were characterized by X-ray diffraction (XRD). The Methyl Orange (MO) was simulated as the sewage under the visible light to explorer the influence of the illumination time and the mass of photocatalyst. The visible-light absorption spectrum of BiVO4 was broadening with doping Co. It was found that the Co/BiVO4 had higher photocatalytic activity than pure BiVO4 .The reason of enhanced catalytic effect also had been analyzed and discussed in the article.

Few-Layered MoS2 Nanostructures for Highly Efficient Visible Light Photocatalysis

NANO ◽  
2016 ◽  
Vol 11 (10) ◽  
pp. 1650114 ◽  
Author(s):  
Dan Li ◽  
Jianwei Li ◽  
Caiqin Han ◽  
Xinsheng Zhao ◽  
Haipeng Chu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Electrochemical Impedance ◽  
X Ray Diffraction ◽  
Electron Hole ◽  
Electrochemical Impedance Spectra ◽  
X Ray ◽  
Transmission Electron ◽  
Electron Hole Pair

Few-layered MoS2 nanostructures were successfully synthesized by a simple hydrothermal method without the addition of any catalysts or surfactants. Their morphology, structure and photocatalytic activity were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, electrochemical impedance spectra and UV-Vis absorption spectroscopy, respectively. These results show that the MoS2 nanostructures synthesized at 180[Formula: see text]C exhibit an optimal visible light photocatalytic activity (99%) in the degradation of Rhodamine B owing to the relatively easier adsorption of pollutants, higher visible light absorption and lower electron–hole pair recombination.

Enhanced visible-active photocatalytic behaviors observed in Mn-doped BiFeO3

2018 ◽  
Vol 32 (17) ◽  
pp. 1850185 ◽  
Author(s):  
Yun-Hui Si ◽  
Yu Xia ◽  
Ya-Yun Li ◽  
Shao-Ke Shang ◽  
Xin-Bo Xiong ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Band Gap ◽  
Diffuse Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
Electron Hole ◽  
X Ray ◽  
Mn Doped ◽  
Hole Recombination ◽  
Narrow Band Gap Semiconductors

A series of BiFeO3 and BiFe[Formula: see text]Mn[Formula: see text]O3 (x = 0, 0.02, 0.04, 0.06, 0.08, 0.10) were synthesized by a hydrothermal method. The samples were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy (EDS) and UV–Vis diffuse reflectance spectroscopy, and their photocatalytic activity was studied by photocatalytic degradation of methylene blue in aqueous solution under visible light irradiation. The band gap of BiFeO3 was significantly decreased from 2.26 eV to 1.90 eV with the doping of Mn. Furthermore, the 6% Mn-doped BiFeO3 photocatalyst exhibited the best activity with a degradation rate of 94% after irradiation for 100 min. The enhanced photocatalytic activity with Mn doping could be attributed to the enhanced optical absorption, increment of surface reactive sites and reduction of electron–hole recombination. Our results may be conducive to design more efficient photocatalysts responsive to visible light among narrow band gap semiconductors.

W-Doped TiO2 Preparation and Photocatalytic Degradation of Guaiacol

2014 ◽  
Vol 513-517 ◽  
pp. 33-36 ◽  
Author(s):  
Zi Chang Xie ◽  
Ying Wang ◽  
Peng Wang ◽  
Lei Zhang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photocatalytic Degradation ◽  
Degradation Rate ◽  
Amorphous State ◽  
X Ray Diffraction ◽  
Model Compounds ◽  
Plant Fibers ◽  
X Ray ◽  
Crystallite Structure

In this paper, W-doped TiO2 (W-TiO2) powder was prepared in hydrothermal method by mixing TiO2 and ammonium metatungstate. The catalysts were characterized by X-ray diffraction and ultraviolet spectrophotometer. The results displayed that W-TiO2 showed an anatase crystallite structure with 2 % W content. W-element in W-TiO2 was amorphous state. The guaiacol was degraded with the W-TiO2 in the visible light. It was a model compounds of lignin existed in the plant fibers. The degradation rate of guaiacol was increased with the photocatalytic time, as high as 88.21 % after 360 min irradiation. It was concluded that the W-TiO2 had an obvious photocatalytic activity under visible light. It can be used in the photocatalytic degradation of lignin.

Sign in / Sign up

Export Citation Format

Share Document