scholarly journals An Analytical Model for a Pneumatic Vibration Isolator with the Stiffness Effect of the Elastomeric Diaphragm

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
Dengfeng Xu ◽  
Qiang Yu ◽  
Fei Shen ◽  
Yu Zhu ◽  
Gaofeng Guan
Keyword(s):  
Analytical Model ◽  
Parameter Design ◽  
Vibration Isolator ◽  
Relevant Model ◽  
Axial Section ◽  
Uniaxial Stretching ◽  
Vibration Isolators ◽  
The Standard Model ◽  
Strain Equation ◽  
Pneumatic Cylinders

The elastomeric diaphragm is widely used in pneumatic vibration isolators, and the relevant model is often ignored due to its complexity. Considering that the ignored model of the elastomeric diaphragm in pneumatic vibration isolators plays an important role in the discrepancy between the predicted and practical behavior, this paper develops an analytical model for the elastomeric diaphragm using the Mooney-Rivlin modeling method and elastomeric theory. Specifically, the elastomeric diaphragm consists of several segments in the axial section. After considering the structural restriction, each segment can be simplified as uniaxial stretching, and the force-strain equation can be established for each segment. By combining the equations of all segments, an analytical model of the elastomeric diaphragm can be built and solved via numerical methods. The developed model is added to the standard model of pneumatic cylinders to supply a complete analytical model for pneumatic vibration isolators. The experimental results demonstrate that the analytically predicted behavior is similar to the practical behavior. The proposed analytical model can be used as a guide for the parameter design of pneumatic isolators in practice.

Vibration Isolator System for Electron Microscope

1990 ◽  
Vol 48 (1) ◽  
pp. 182-183
Author(s):  
K. Ohi ◽  
M. Mizuno ◽  
T. Kasai ◽  
Y. Ohkura ◽  
K. Mizuno ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Magnetic Fields ◽  
Environmental Conditions ◽  
Vibration Isolator ◽  
Air Conditioners ◽  
Vibration Isolators ◽  
Large Size ◽  
Electron Microscopes

In recent years, with electron microscopes coming into wider use, their installation environments do not necessarily give their performance full play. Their environmental conditions include air-conditioners, magnetic fields, and vibrations. We report a jointly developed entirely new vibration isolator which is effective against the vibrations transmitted from the floor.Conventionally, large-sized vibration isolators which need the digging of a pit have been used. These vibration isolators, however, are large present problems of installation and maintenance because of their large-size.Thus, we intended to make a vibration isolator which1) eliminates the need for changing the installation room2) eliminates the need of maintenance and3) are compact in size and easily installable.

On the Effects of Mistuning a Force-Excited System Containing a Quasi-Zero-Stiffness Vibration Isolator

2015 ◽  
Vol 137 (4) ◽  
Author(s):  
Ali Abolfathi ◽  
M. J. Brennan ◽  
T. P. Waters ◽  
B. Tang
Keyword(s):  
Vibration Isolation ◽  
Dynamic Stiffness ◽  
Low Frequency ◽  
Vibration Isolator ◽  
Linear Vibration ◽  
Vibration Isolators ◽  
Zero Dynamic ◽  
Low Frequency Vibration ◽  
Excited System ◽  
Better Than

Nonlinear isolators with high-static-low-dynamic-stiffness have received considerable attention in the recent literature due to their performance benefits compared to linear vibration isolators. A quasi-zero-stiffness (QZS) isolator is a particular case of this type of isolator, which has a zero dynamic stiffness at the static equilibrium position. These types of isolators can be used to achieve very low frequency vibration isolation, but a drawback is that they have purely hardening stiffness behavior. If something occurs to destroy the symmetry of the system, for example, by an additional static load being applied to the isolator during operation, or by the incorrect mass being suspended on the isolator, then the isolator behavior will change dramatically. The question is whether this will be detrimental to the performance of the isolator and this is addressed in this paper. The analysis in this paper shows that although the asymmetry will degrade the performance of the isolator compared to the perfectly tuned case, it will still perform better than the corresponding linear isolator provided that the amplitude of excitation is not too large.

Shock isolation characteristics of a bistable vibration isolator with tunable magnetic controlled stiffness

2021 ◽  
pp. 1-28
Author(s):  
Bo Yan ◽  
Peng Ling ◽  
Yanlin Zhou ◽  
Chuan-yu Wu ◽  
Wen-Ming Zhang
Keyword(s):  
Damping Ratio ◽  
Excitation Amplitude ◽  
Relative Displacement ◽  
Vibration Isolator ◽  
Maximum Acceleration ◽  
Vibration Isolators ◽  
Displacement Ratio ◽  
Shock Isolation ◽  
Maximum Relative Displacement ◽  
Isolation Performance

Abstract This paper investigates the shock isolation characteristics of an electromagnetic bistable vibration isolator (BVI) with tunable magnetic controlled stiffness. The theoretical model of the BVI is established. The maximum acceleration ratio (MAR), maximum absolute displacement ratio (MADR) and maximum relative displacement ratio (MRDR) are introduced to evaluate the shock isolation performance of the BVI. The kinetic and potential energy are observed to further explore the performance of the BVI. The effects of the potential barrier, shape of potential well, damping ratio on the BVI are discussed compared to the linear vibration isolators (LVI). The results demonstrate that the intrawell oscillations and snap-through oscillations are determined by the excitation amplitude and duration time of main pulse. MADR and MRDR of the BVI are smaller than those of the LVI. The maximum acceleration peak amplitude of the BVI is far below that of the LVI, especially when the snap-through oscillation occurs. In brief, the proposed BVI has a better shock isolation performance than the LVI and has the potential to suppress the shock of space structures during the launch and on-orbit deploying process.

Recent Study on the Passive and Active Vibration Isolators

2014 ◽  
Vol 494-495 ◽  
pp. 491-496
Author(s):  
Hua Ping Mei ◽  
Hao Yue Tian ◽  
Shuan Huang
Keyword(s):  
Vibration Isolation ◽  
Control Method ◽  
Low Frequency ◽  
Research Direction ◽  
Magnetic Suspension ◽  
High Frequency Oscillation ◽  
Future Research ◽  
Vibration Isolator ◽  
Vibration Isolators ◽  
Active Vibration

The vibration isolators have witnessed significant developments due to pressing demands for high resolution metrology and manufacturing, optical, physical and chemical experiments. In the view of these requirements, the engineers and physicists have exploited different types of vibration isolators. This paper firstly presents the recent developments on the passive vibration isolators. It finds that the passive vibration isolators can constrain the high frequency oscillation. The active control is the efficient method to cancel the low frequency vibration. Then, the paper is concerned with the recent advances on the active vibration isolator. The appropriate actuator, sensor and advanced control method are the key component of the active vibration isolator to enhance their vibration isolation properties. Finally, the author proposes that the magnetic suspension vibration isolator is a future research direction in the field of the vibration isolation.

Fluidic Composite Tunable Vibration Isolators

2010 ◽  
Author(s):  
Lloyd H. Scarborough ◽  
Christopher D. Rahn ◽  
Edward C. Smith
Keyword(s):  
Material Properties ◽  
Unique Feature ◽  
Vibration Reduction ◽  
Vibration Isolator ◽  
Frequency Range ◽  
Vibration Isolators ◽  
New Class ◽  
Isolation Frequency ◽  
Transmitted Force ◽  
Flexible Matrix Composite

Coupling a Fluidic Flexible Matrix Composite (F2MC) to an air-pressurized fluid port produces a fundamentally new class of tunable vibration isolator. This device provides significant vibration reduction at an isolation frequency that can be tuned over a broad frequency range. The material properties and geometry of the F2MC element, as well as the port inertance, determine the isolation frequency. A unique feature of this device is that the port inertance depends on pressure so the isolation frequency can be adjusted by changing the air pressure. For constant port inertance, the isolation frequency is largely independent of the isolated mass so the device is robust to changes in load. A nonlinear model is developed to predict isolator length and port inertance. The model is linearized and the frequency response calculated. Experiments agree with theory, demonstrating a tunable isolation range from 9 Hz to 36 Hz and minimum transmitted force reductions of 90% at the isolation frequency.

Improved Feasible Load Range and Its Effect on the Frequency Response of Origami-Inspired Vibration Isolators With Quasi-Zero-Stiffness Characteristics1

2018 ◽  
Vol 141 (2) ◽  
Author(s):  
Kazuya Inamoto ◽  
Sachiko Ishida
Keyword(s):  
Numerical Analysis ◽  
Vibration Isolator ◽  
Spring Stiffness ◽  
Frequency Range ◽  
Torsional Buckling ◽  
Load Range ◽  
Nonlinear Characteristics ◽  
Vibration Isolators ◽  
Initial Load ◽  
Linear Spring

We describe herein a method for extending the load range of a vibration isolator using a foldable cylinder consisting of a torsional buckling pattern and evaluate the vibration isolating performance through excitation experiments. A previous study determined that the foldable cylinder is bistable and acts as a vibration isolator with nonlinear characteristics in a displacement region, where the spring stiffness is zero. Its spring characteristics and vibration isolating performance were clarified by numerical analysis and excitation experiments. The findings indicated that the vibration in a certain frequency range is reduced where the spring stiffness is zero. However, this vibration isolator has a disadvantage in that it can only support an initial load that transfers to the zero-spring-stiffness region. Therefore, in this research, we improve the position of the linear spring attached to the isolator. As a result, the initial load range is extended by two to four times that of the conventional vibration isolator. Furthermore, the isolating performance is maintained even when the initial load is changed within a given load range.

scholarly journals A Novel Ring Spring Vibration Isolator for Metro Superstructure

2021 ◽  
Vol 11 (18) ◽  
pp. 8422
Author(s):  
Yuhong Ling ◽  
Shan Wu ◽  
Jingxin Gu ◽  
Hongtao Lai
Keyword(s):  
Vibration Isolation ◽  
Common Knowledge ◽  
Displacement Curve ◽  
Vibration Isolator ◽  
Spring Stiffness ◽  
Dynamic Simulations ◽  
Theoretical Derivation ◽  
Vibration Isolators ◽  
Good Energy ◽  
Compression Springs

Due to the serious impact of metro vibration on people’s lives, it is important to design vibration isolators. In this study, the dynamic characteristics of a thick-walled ring spring are studied first. Through theoretical derivation, a new formula suitable for thick-walled ring springs is proposed. Finite element numerical analysis was performed to study the load–displacement curve and stress of the ring spring and verified the correctness of the formula. According to the studied mechanic characteristics, a novel ring spring isolator is proposed for vibration isolation of the metro superstructure. With the help of a ring spring, the proposed isolator has good energy absorption and self-reset function. The dynamic simulations were conducted in a multi-story building with the ring spring isolator as the isolator to study the vibration performance. It is common knowledge that the vertical natural frequency of the superstructure that is isolated by compression springs is given by the mass of the superstructure and the spring stiffness. In order to obtain vibration attenuation and control the vertical deformation, the spring stiffness needs to be 500–1000 kN/mm. Hence, it is clear that the vibration isolator does reduce the vertical eigenfrequency. By comparing the isolated structure with the non-isolated structure, it is proved that the new isolator can effectively improve a building’s serviceability.

Acoustic decoupling for structural elements by affixed supports - inherent contradiction or perfect complement? Restrained vibration isolation supports - a critical review

2021 ◽  
Vol 263 (4) ◽  
pp. 2801-2811
Author(s):  
Adam Wells ◽  
Patrick Carels
Keyword(s):  
Analytical Model ◽  
Critical Review ◽  
Laboratory Testing ◽  
Vibration Isolation ◽  
Mechanical Vibration ◽  
Structural Elements ◽  
Noise And Vibration ◽  
Vibration Isolators ◽  
Models Comparison ◽  
Isolation Performance

Restrained vibration isolation supports balance efficient isolation performance and stability for the supporting body under present loads. Necessary and beneficially for noise and vibration isolation applications with stringent stability requirements, such as full building isolation with potential uplift, interior partition sway bracing, curtain walls, elevator rail isolation, and mechanical vibration isolation, the performance of restrained vibration isolators are often misunderstood or oversimplified. This paper investigates the general vibration isolation theory used to create the analytical model for restrained isolation supports, intricacies of vibration isolation materials which may cause reality to diverge from well-known models, comparison of theory to laboratory testing, and a review of common uses/applications for these types of vibration isolation solutions, and recommendation to avoid undesired results from common pitfalls associated with restrained isolation supports implementation and installations.

ASONIKA-V: mechanical influence simulation of electronic structures installed on vibration isolators

2021 ◽  
Author(s):  
Keyword(s):  
Electronic Structures ◽  
Software Package ◽  
Random Vibration ◽  
Mechanical Characteristics ◽  
Acoustic Noise ◽  
Linear Acceleration ◽  
Vibration Isolator ◽  
Vibration Isolators ◽  
Characteristics Analysis ◽  
Mechanical Influence

The ASONIKA-V software package, intended for the mechanical characteristics analysis of the cabinets, racks and blocks of radio-electronic equipment installed on vibration isolators is consi dered. Account of harmonic vibration, random vibration, shock loads, linear acceleration, acoustic noise is provided. The issues of identification, parametric and structural optimization are considered. Keywords radio engineering device; mechanical characteristics; identification; math modeling; vibration isolator; optimization

Vibration Suppression Performance of a Desktop Vibration Isolator Supported by Four Air Spring

2017 ◽  
Author(s):  
Yuichi Baba ◽  
Kento Onishi ◽  
Toshihiko Asami
Keyword(s):  
Support System ◽  
Vibration Isolation ◽  
Vibration Suppression ◽  
Theoretical Calculations ◽  
Small Diameter ◽  
Measuring Instruments ◽  
Vibration Isolator ◽  
Air Spring ◽  
Damping Force ◽  
Vibration Isolators

Desktop vibration isolators are often used as precision measuring instruments. This article discusses the accuracy of performance prediction methods for vibration isolators elastically supported by four air springs. Each air spring possesses a reservoir tank to ensure the natural frequency of the support system remains low and to provide adequate damping force. For practical use, air springs and reservoir tanks should be installed in separate locations and connected by a small-diameter pipe because desktop isolators must be thin. Our previous studies have shown that there is a secondary resonance point in systems supported by air springs with long pipes and reservoir tanks and that it is not simple to theoretically calculate the amplitude and frequency at this point because this type of air spring support system has nonlinear characteristics. In this study, the change in the vibration isolation performance of a desktop vibration isolator with the length of the pipe connecting the main air tank and the reservoir tank of an air spring-supported system was examined experimentally and approximated using theoretical calculations.

Sign in / Sign up

Export Citation Format

Share Document