scholarly journals Extraction, Purification, Characterization, and Antiangiogenic Activity of Acidic Polysaccharide from Buddleja officinalis

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Xiaoteng Yan ◽  
Zhuan Yan ◽  
Qingping Xiong ◽  
Gaoqin Liu ◽  
Juanjuan Zhu ◽  
...  
Keyword(s):  
Average Molecular Weight ◽  
Acid Group ◽  
Raw Material ◽  
Ultrasonic Power ◽  
Optimal Parameters ◽  
Acidic Polysaccharide ◽  
Antiangiogenic Activity ◽  
Uronic Acid Content ◽  
Ultrasonic Time ◽  
Crude Polysaccharide

Firstly, optimal parameters of crude polysaccharide from Buddleja officinalis were obtained as follows: ratio of water to raw material of 26 : 1, ultrasonic power of 240 W, ultrasonic time of 45 min, and ultrasonic temperature of 62°C. Secondly, acidic polysaccharide (APBOM) from Buddleja officinalis was successfully acquired with the yield of 9.57% by using DEAE-52 cellulose and Sephadex G-100 gel column chromatography. Then, we found that total polysaccharide content of APBOM was 94.37% with a sulfuric acid group of 1.68%, uronic acid content of 17.41%, and average molecular weight of 165.4 kDa. Finally, APBOM was confirmed to have significant antiangiogenic effects.

Study on Ultrasonic Extraction of 1-Deoxynojirimycin(DNJ) and Polysaccharides from Mulberry Leaves

2011 ◽  
Vol 236-238 ◽  
pp. 2759-2764 ◽  
Author(s):  
Shu Xing Liu ◽  
Jun Li Hua ◽  
Hong Liang Li
Keyword(s):  
Orthogonal Experiment ◽  
Extraction Ratio ◽  
Raw Material ◽  
Ultrasonic Power ◽  
Optimum Conditions ◽  
Mulberry Leaves ◽  
Ultrasonic Time ◽  
Optimal Technology ◽  
Single Factor Experiment ◽  
Water Ratio

The study on optimal technology of extracting 1-deoxynojirimycin (DNJ) and polysaccharides from mulberry leaves as raw material is conducted on the basis of the single factor experiment and orthogonal experiment, and the study result shows the optimum conditions of the DNJ extraction are solid to water ratio of 1∶40, the ultrasonic power of 125 w, the ultrasonic temperature of 70°C, and the ultrasonic time of 20 min. The DNJ extraction ratio of 0.092%; while the optimum conditions of the polysaccharides extraction are solid to water ratio of 1 ∶30 , the ultrasonic power of 125 w , the ultrasonic temperature of 80°C, the ultrasonic time of 40 min and the polysaccharides extraction ratio of 2.52%.

scholarly journals Ultrasonic-Assisted Extraction of Natural Yellow Pigment from Physalis pubescens L. and Its Antioxidant Activities

2018 ◽  
Vol 2018 ◽  
pp. 1-6
Author(s):  
Haitang Wang ◽  
Lin Shi ◽  
Xiaoyu Yang ◽  
Rui Hong ◽  
Liang Li
Keyword(s):  
Antioxidant Activities ◽  
Radical Scavenging Activity ◽  
Radical Scavenging ◽  
Yellow Pigment ◽  
Ultrasonic Power ◽  
Optimal Parameters ◽  
Assisted Extraction ◽  
Ultrasonic Time ◽  
Ultrasonic Assisted ◽  
Ultrasonic Assisted Extraction

Physalis pubescens L. is rich in natural pigments but has not yet been fully utilized. Ultrasound-assisted extraction of yellow pigment from Physalis pubescens L. was investigated by response surface methodology in this study. Optimal parameters were ultrasonic power of 29.21%, ultrasonic time of 14.41 min, and ultrasonic interval time of 10.55 s. The yield was 0.193% under optimal parameters. FRAP, ABTS, and superoxide radical scavenging activity of the yellow pigment were 6.11 ± 0.22 mmol/g, 2.80 ± 0.27 mmol/g, and 57281.5 ± 2749.5 U/g, respectively. The results showed that the yield of yellow pigment could be improved by ultrasonic-assisted extraction and the yellow pigment extracted by ultrasound had antioxidant activity.

Efficient Synthesis of 3,4-Dihydropyrimidin-2(1H)-Ketone Using SbCl3 as Catalyst under Ultrasonic Conditions

2013 ◽  
Vol 316-317 ◽  
pp. 1045-1048
Author(s):  
Jin Lin ◽  
Jing Fen Li ◽  
Bin Bin Zheng ◽  
Xiao Ting Dai ◽  
Jia Feng ◽  
...  
Keyword(s):  
Design Optimization ◽  
Ethyl Acetoacetate ◽  
Orthogonal Design ◽  
Optimization Method ◽  
Raw Material ◽  
Ultrasonic Power ◽  
Efficient Synthesis ◽  
Extraction Technology ◽  
Ultrasonic Time ◽  
Ultrasonic Conditions

In this study, SbCl3 as catalyst to benzaldehyde, ethyl acetoacetate and urea as raw material in the ultrasonic radiation synthesis of 3,4-Dihydropyrimidin-2(1H)-ketone. According to the orthogonal design optimization experiment, optimization method ultrasonic extraction technology, and ultimate pass to get the best synthetic condition for: material ratio 1.0,1.0,1.5(mol), ultrasonic power 100 w, ultrasonic time 2 hours, ultrasonic temperature 65°C, the yield is 61.08%.

scholarly journals Optimization of Ultrasonic-Assisted Extraction, Characterization, and Antioxidant Activities of Polysaccharides From Sojae Semen Praeparatum

2021 ◽  
Vol 16 (5) ◽  
pp. 1934578X2110206
Author(s):  
Yongshuai Jing ◽  
Ruijuan Zhang ◽  
Lan Li ◽  
Danshen Zhang ◽  
Yu Liu ◽  
...  
Keyword(s):  
Antioxidant Activities ◽  
Deae Cellulose ◽  
Chemical Compositions ◽  
Hydroxyl Groups ◽  
Ultrasonic Frequency ◽  
Ultrasonic Power ◽  
Assisted Extraction ◽  
Ultrasonic Time ◽  
Ultrasonic Assisted ◽  
Ultrasonic Assisted Extraction

In this study, response surface methodology (RSM) was used to optimize the ultrasonic-assisted extraction parameters of Sojae Semen Praeparatum polysaccharides (SSPP-80), the optimum conditions were determined as follows: ultrasonic frequency of 100 W, ultrasonic power of 80 Hz, ultrasonic temperature of 52℃, ultrasonic time of 23 minutes, and liquid to raw material ratio of 40 mL/g. Based on these conditions, polysaccharides extraction rate was 7.72% ± 0.26%. Then, 2 novel polysaccharides (SSPP-80‐1, SSPP-80‐2) were isolated from SSPP by DEAE-cellulose 52 chromatography. The chemical compositions, physicochemical properties, and structure of SSPPs were investigated by simultaneous thermal analyzer (TGA), scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FI-IR), and high-performance liquid chromatography (HPLC). The results showed that SSPP-80 and 2 fractions were mainly composed of mannose (Man), glucose (Glc), galactose (Gal), xylose (Xyl), and arabinose (Ara). In addition, the antioxidant activities were evaluated against the DPPH and hydroxyl radical in vitro, the IC50 of SSPP-80, SSPP-80‐1 and SSPP-80‐2 against DPPH free radical were 4.407, 8.267, and 5.204 mg/mL, respectively, whereas the IC50values for removing hydroxyl groups were 5.318, 3.516, and 4.016 mg/mL, respectively. It demonstrated that SSPP-80 and 2 fractions had certain antioxidant activity. Theoretical basis for use of Sojae Semen Praeparatum polysaccharides was provided by this study.

Process Optimization of the Preparation of TiO2 Microcapsule Used for Photo-Catalytic Degradation with Ultrasound Irradiation

2012 ◽  
Vol 627 ◽  
pp. 770-774
Author(s):  
Xiao Mei Wang ◽  
Bao Bao Zhao ◽  
Cheng Rong Zhang
Keyword(s):  
Process Optimization ◽  
Ultrasound Irradiation ◽  
Core Material ◽  
Wall Material ◽  
Ultrasonic Power ◽  
Complex Coacervation ◽  
Photo Degradation ◽  
Reaction Solution ◽  
Ultrasonic Time ◽  
Ultrasonic Conditions

Microcapsules were prepared using the complex coacervation method with nano anatase TiO2 as the core material, gelatin/Arabia gum as the wall material, while dispersing TiO2 into the reaction solution using the ultrasonic. The prepared microcapsules can be finished into textiles such as the polypropylene nonwovens, and the microcapsules in the textiles gradually fracture and the anatase TiO2 was released, which would facilitate photo-degradation of the polypropylene nonwovens when exposed in sunlight. The microcapsules size was used as the process optimization evaluation index, and the quadratic general revolving combination design was used to conduct the experiments for obtaining the optimum ultrasonic conditions, and the other progress parameters were the same that used in our early microcapsule preparation. The obtained optimal process for ultrasound is: ultrasonic time is 17min; ultrasonic power is 74W and ultrasound temperature 60 °C.

Behavior of xylans from the Eucalyptus species. Part 2. Characterization of 4-O-methylglucuronoxylans isolated from black liquors of kraft pulping of Eucalyptus grandis and E. urophylla

Holzforschung ◽  
2013 ◽  
Vol 67 (2) ◽  
pp. 123-128
Author(s):  
Andréia S. Magaton ◽  
Teresa Cristina F. Silva ◽  
Jorge Luiz Colodette ◽  
Dorila Piló-Veloso ◽  
Flaviana Reis Milagres ◽  
...  
Keyword(s):  
Average Molecular Weight ◽  
Eucalyptus Grandis ◽  
Kraft Pulping ◽  
Raw Material ◽  
Size Exclusion ◽  
Eucalyptus Species ◽  
Exclusion Chromatography ◽  
Ft Ir ◽  
Black Liquors

Abstract 4-O-methylglucuronoxylans isolated from Eucalyptus grandis and Eucalyptus urophylla kraft black liquors (KBLs) were chemically characterized by Fourier transform infrared spectroscopy (FT-IR), size exclusion chromatography (SEC), and nuclear magnetic resonance (NMR) spectroscopy. Doses of alkali charge, expressed as active alkali (AA), were 16, 17, and 18% while the sulfidity was kept at 25%. Kappa numbers of 19.1, 17.5, and 16.1 for E. grandis and 20.4, 16.8, and 15.4 for E. urophylla were obtained. At higher alkali charges, the recovery of xylans from the KBLs was lower and the degree of substitution of xylans with uronic acids decreased. The average molecular weight (Mw) of the recovered xylans was greater under conditions of mild pulping, i.e., in the case of pulps with higher kappa numbers. Mw of xylans ranged from 16.1 to 19.1 kDa for E. grandis and from 15.4 to 20.4 kDa for E. urophylla. The xylans from KBL may be useful as pulp modifying agents or as a raw material for advanced applications.

Optimization of the Ultrasonic Extraction of Gypenoside III from Gynostemma pentaphyllum by Response Surface Methodology

2012 ◽  
Vol 550-553 ◽  
pp. 1866-1870
Author(s):  
Xiao Dan Tang ◽  
Hai Yang Hang ◽  
Shao Yan Wang ◽  
Jing Xiang Cong
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Extraction Yield ◽  
Raw Material ◽  
Extraction Temperature ◽  
Optimal Conditions ◽  
Gynostemma Pentaphyllum ◽  
Bioactive Component ◽  
Yield Value ◽  
Ultrasonic Time

Gypenosides III is a major bioactive component which is rich in Gynostemma pentaphyllum. For better utilization of the native resource, response surface methodology was used to optimize the extraction conditions of gypenosides III from G. pentaphyllum. The effects of three independent variables on the extraction yield of gypenosides III were investigated and the optimal conditions were evaluated by means of Box-Behnken design. The optimal conditions are as follows: ratio of ethanol to raw material 25, extraction temperature 58°C and ultrasonic time 25min. Under these conditions, the yield of gypenoside III is 1.216±0.05%, which is agreed closely with the predicted yield value.

The Dispersion of MWCNTS in Acetone Solution of SAN

2015 ◽  
Vol 1088 ◽  
pp. 8-12
Author(s):  
Xin Long Ling ◽  
Ling Jiao Xie ◽  
Li Ming Zou ◽  
Yi Zhe Wei
Keyword(s):  
Particle Size ◽  
Average Particle Size ◽  
Acetone Solution ◽  
Average Particle ◽  
Ultrasonic Power ◽  
Acrylonitrile Copolymer ◽  
Mass Percent ◽  
Ultrasonic Time ◽  
Styrene Acrylonitrile

MWCNTs were dispersed in acetone solution of styrene-acrylonitrile copolymer (SAN). Four factors which had effect on the average particle size, including the ratio of MWCNTs to SAN, the mass percent of MWCNTs, the ultrasonic power and the ultrasonic time, were studied. The optimal dispersion conditions of MWCNTs in acetone solution of SAN were the ratio of MWCNTs to SAN 1:3, the mass percent of MWCNTs 0.25%, the ultrasonic power 100%, and the ultrasonic time 30 min.

Optimization of Ultrasonic Extraction of Polyphenol from Pinus Koraiensis Bark Using Response Surface Methodology

2011 ◽  
Vol 183-185 ◽  
pp. 1874-1878 ◽  
Author(s):  
Ji Chang Wang ◽  
Zhen Yu Wang ◽  
Zi Luan Fan ◽  
Li Li Zuo ◽  
Shuang Qi Tian ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Phenolic Compounds ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Processing Parameters ◽  
Ultrasonic Extraction ◽  
Raw Material ◽  
Extraction Time ◽  
Pinus Koraiensis ◽  
Ultrasonic Power

Ultrasonic technology was applied for phenolic compounds extraction from the Pinus koraiensis bark （PKB） and response surface methodology (RSM) was used to optimize the effects of processing parameters on phenolic compounds yields. When ultrasonic power 160W,three independent variables were ultrasonic extraction time (X1 20-40min), ratio of water to raw material (X2 1:20-1:40 g/mL)and ethanol concentration(X3 20％-60％), respectively.The optimal extraction conditions of phenolic compounds were determined as follows: Ultrasonic extraction time 30.61 min, ratio of water to raw material 30.79 mL/g and ethanol concentration 42.2%. Under these conditions, the experimental yield of phenolic compounds was 8.2409 ± 0.0648‰, well matched with the predicted models with the coefficients of determination (R2) of 0.9920, which was agreed closely with the predicted value (8.2963‰).

scholarly journals Preparation of Nanocellulose Aerogel from the Poplar (Populus tomentosa) Catkin Fiber

Forests ◽  
2019 ◽  
Vol 10 (9) ◽  
pp. 749 ◽  
Author(s):  
Wu ◽  
Sun ◽  
Wu ◽  
Shi ◽  
Chen ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Elastic Modulus ◽  
Honeycomb Structure ◽  
Populus Tomentosa ◽  
Raw Material ◽  
Sodium Chlorite ◽  
Maximum Value ◽  
Ultrasonic Time ◽  
Naoh Solution ◽  
The Difference

: The effects of chemical pretreatment on the purification of poplar (Populus tomentosa) catkin fiber and the effect of ultrasonic time for the microfibrillarization of poplar catkin fiber (PCF) were studied. The nanocellulose aerogels were prepared by freeze drying the cellulose solutions. The density, porosity, micro morphology, thermal stability and mechanical properties of the aerogels were analyzed. It was found that the dewaxing time of PCF is shorter than that of unsonicated nanocellulose. After the treatment of 0.5 wt% sodium chlorite for 2 h, the lignin of PCF was removed. After the chemical purification, the PCF was treated with 2 and 5 wt% NaOH solution and ultrasonicated for 5 and 10 min, respectively. When the ultrasonic time was 10 min, the diameter of the nanocellulose was 20-25 nm. When the ultrasonic time was 5 min, the aerogels with porous honeycomb structure can be prepared by using the nanocellulose sol of PCF as raw material. The density of the aerogels was only 0.3-0.4 mg/cm3 and the porosities of the aerogels were all larger than 99%. The difference between the pyrolysis temperature of aerogels was small, the elastic modulus of aerogels was 30–52 kPa, and the compressive strength was 22–27 kPa. With the increase of the concentration of NaOH solution (5 wt%) and ultrasonic time (10 min), the elastic modulus of aerogels increased gradually and reached the maximum value of 52 kPa, while the compressive strength reached the maximum value of 27 kPa when the PCF being treated in 5 wt% NaOH solution and was ultrasonicated for 5 min.

Sign in / Sign up

Export Citation Format

Share Document