scholarly journals Influence of Discontinuities on Rock Failure under Blasting at Shuangjiangkou Hydropower Station

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Xi Zhao ◽  
Bangbiao Wu ◽  
Liyuan Yu ◽  
Tieshuan Zhao ◽  
Zhonghua Hu

The underground caverns of Shuangjiangkou hydropower station are under complex geological conditions. During excavation, the stability of the tunnels is severely affected by problems, such as blasting impact and excavation unloading, resulting in abnormal deformation at different locations. On the basis of on-site measurement, the characteristics of rocks at the main powerhouse and the main transformer room are compared through dynamic tests, and a numerical model is established using discrete element method (DEM) to analyze the special influence of fault SPD9-f1 on the deformation after excavation. It is revealed that the surrounding rock of the main powerhouse has stronger impact resistance than that of the main transformer room and that the existence of fault SPD9-f1 accounts for the abnormal deformation. In this study, the failure characteristics and mechanism of surrounding rock deformation controlled by stress and fault are revealed, providing important references for the subsequent excavation and support design of underground projects.

2013 ◽  
Vol 734-737 ◽  
pp. 535-539
Author(s):  
Hai Yuan Liu ◽  
Zhi Gang Wang ◽  
Ji Li ◽  
Lang Bai

broken rock zone is the main reason for the convergence of surrounding rock deformation, and its thickness not only is a reflection of many factors which influence the stability of surrounding rock, but also is the results of the interaction of many factors, a comprehensive classification index. Roadway support design based on classification result of broken rock zone, has a solid theoretical foundation, and the field application effect is remarkable.


Complexity ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Zhi Tang ◽  
Hao Wu ◽  
Jinguo Lv ◽  
Zhuangzhuang Xin ◽  
Wenbo Zuo

In order to improve the impact resistance and mechanical performance of anchor rods and satisfy the requirements for supporting rockburst roadways, the energy balance equation of the energy-absorbing support and roadway surrounding rock system is established. Moreover, to effectively prevent rockburst disasters, the energy criterion for roadway instability is derived. From the perspective of an energy-absorbing support, a yield-absorbing anti-shock anchor composed of a rod body, tray, constant resistance energy-absorbing device, and special-shaped nut is designed and developed; compared with ordinary anchor rods, this rod has stronger mechanical properties for resisting impact. Theoretical and numerical simulation studies show that the energy-absorbing device has a repeatable deformation failure mode and a constant yield force. The paper also presents the principle involved in the design of anti-shock bolt supports. The energy-absorbing support not only effectively guides and controls the release and conversion of impact energy but also consumes the impact energy in the buffering process of the anchor to ensure the stability of surrounding rock and support protection system. This study aims to provide reference for roadway support design and to improve rock bolts used in rockburst roadways.


Energies ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7548
Author(s):  
Yulong Chen ◽  
Junwen Zhang ◽  
Jiahao Zhang ◽  
Bin Xu ◽  
Luji Zhang ◽  
...  

With the rapid development of underground caverns in the fields of hydraulic engineering, mining, railway and highway, the frequency, and intensity of rockburst and dynamic instability have gradually increased, which has become a bottleneck restricting the safe construction of deep caverns. This paper presents a review of the current understanding of rockburst precursors and the dynamic failure mechanism of the deep tunnel. Emphasis is placed on the stability of the surrounding rock of the deep tunnel, the rockburst prediction method, and the dynamic failure characteristics of the surrounding rock of the deep tunnel. Throughout the presentation, the current overall gaps in understanding rockburst precursors and the dynamic failure mechanism of deep tunnels are identified in an attempt to stimulate further research in these promising directions by the research community.


2021 ◽  
Vol 11 (21) ◽  
pp. 9795
Author(s):  
Xiaojie Yang ◽  
Gang Yang ◽  
Ruifeng Huang ◽  
Yajun Wang ◽  
Jianning Liu ◽  
...  

Research on underground coal mines has primarily focused on the stability of roadways. Mining activities lead to significant damage to the surrounding rocks and also degrade the support to the roadways. Considering the 21309 roadway of the Huojitu coal mine as a case study, this work comprehensively analyzed the characteristics of the surrounding rock using three methods: theoretical calculations, FLAC3D numerical modeling, and field observations. The results indicate that, under the influence of secondary mining, the failure range and stress concentration degree of the surrounding rock are considerably higher than those under the influence of primary mining. In this case, the maximum damage range in the surrounding rock can reach 1.8 m, the maximum principal stress can reach 19.82 MPa, and the ratio of the maximum principal stress to the minimum principal stress can reach 1.95. According to the results, the previous support design for roadways was optimized and applied in the field. Field monitoring revealed that the roadway deformation was effectively controlled, and the optimized support design was safe and reliable. This study is expected to serve as a reference for support designs or optimization under similar geological conditions.


2011 ◽  
Vol 368-373 ◽  
pp. 2925-2931
Author(s):  
Chun Yu Gao ◽  
Jian Hui Deng ◽  
Fan Li Meng

The underground cavities of the Guandi Hydropower Station comprise four pressure division tunnels, a generator chamber, a main transformer chamber, a tail water control chamber and two tail water tunnels and arrange in the basalt mountain on the right bank of the dam. Based on the brief introduction of cavity arrangement, geological conditions, monitoring design and execution, the deformation magnitude and deformation characteristics of the three major cavities are focused on analyzing. The stability of the cavities is evaluated. The quality of the surrounding rock masses of the underground cavities of the Guandi Hydropower Station is good and the deformation is normally less than 30mm. However, some parts have large deformation due to the influence of the structure surfaces and the maximum deformation is 61.49 mm. Most of the parts with larger deformation are the middle and upper positions of the side walls and rock anchor beam positions. The structure surfaces have noticeable action for controlling the surrounding rock mass deformation. The stability of the cavities is good.


2019 ◽  
Vol 136 ◽  
pp. 04023
Author(s):  
Ming Zhao ◽  
Ke Li ◽  
Hong Yan Guo ◽  
KaiCheng Hua

Based on the special geological conditions of a tunnel in Qingyuan section of Huizhou-Zhanzhou Expressway, FLAC3d numerical simulation software is used to simulate the rheological properties and instability of surrounding rock in large-section fully weathered sandstone section, and the stability and loss of surrounding rock are analyzed. The deformation of the dome and the face at steady state is analyzed. It is found that: 1) when the surrounding rock is in a stable state, the deformation curve of the dome is smooth. When the surrounding rock of the face is unstable, the front of the face appears ahead. Deformation should be first strengthened on the surrounding rock in front of the face. 2) The arched foot is an important part of the instability of the surrounding rock. In order to prevent the expansion of the collapsed part, the arched part should be reinforced. 3) In order to obtain the limit state of surrounding rock stability, the strength of surrounding rock is reduced, and the strength reduction coefficient corresponding to the displacement sudden point is taken as the safety factor of rock stability around the hole, and the stability safety coefficients of surrounding rock of each construction step are greater than 1.2. 4) The dynamic standard values of deformation control in the whole construction stage are obtained by analyzing the deformation curves of each data monitoring point with time in the corresponding time period of each construction step.


2019 ◽  
Vol 2019 ◽  
pp. 1-21 ◽  
Author(s):  
Cheng Zhu ◽  
Yong Yuan ◽  
Zhongshun Chen ◽  
Zhiheng Liu ◽  
Chaofeng Yuan

The stability control of the rock surrounding recovery roadways guarantees the safety of the extraction of equipment. Roof falling and support crushing are prone to occur in double-key strata (DKS) faces in shallow seams during the extraction of equipment. Therefore, this paper focuses on the stability control of the rock surrounding DKS recovery roadways by combining field observations, theoretical analysis, and numerical simulations. First, pressure relief technology, which can effectively release the accumulated rock pressure in the roof, is introduced according to the periodic weighting characteristics of DKS roofs. A reasonable application scope and the applicable conditions for pressure relief technology are given. Considering the influence of the eroded area on the roof structure, two roof mechanics models of DKS are established. The calculation results show that the yield load of the support in the eroded area is low. A scheme for strengthening the support with individual hydraulic props is proposed, and then, the support design of the recovery roadway is improved based on the time effects of fracture development. The width of the recovery roadway and supporting parameters is redesigned according to engineering experience. Finally, constitutive models of the support and compacted rock mass in the gob are developed with FLAC3D software to simulate the failure characteristics of the surrounding rock during pressure relief and equipment extraction. The surrounding rock control effects of two support designs and three extraction schemes are comprehensively evaluated. The results show that the surrounding rock control effect of Scheme 1, which combines improved support design and the bidirectional extraction of equipment, is the best. Engineering application results show that Scheme 1 realizes the safe extraction of equipment. The research results can provide a reference and experience for use in the stability control of rock surrounding recovery roadways in shallow seams.


2020 ◽  
Vol 2020 ◽  
pp. 1-16 ◽  
Author(s):  
Jucai Chang ◽  
Kai He ◽  
Zhiqiang Yin ◽  
Wanfeng Li ◽  
Shihui Li ◽  
...  

In view of the influence of mining stress on the stability of the surrounding rock of inclined roof mining roadways in deep mines, the surrounding rock stability index is defined and solved based on the rock strength criterion and the stress distribution. The mining roadway of the 17102(3) working face of the Pansan Coal Mine is used as the engineering background and example. The surrounding rock’ stabilities under the conditions of no support and bolt support are analyzed according to the surrounding rock’s stability index and the deformation data. The results show that the areas of low wall and high wall instability are 1.68 m2 and 2.12 m2, respectively, and the low wall is more stable than the high wall; the areas of the roof and floor instability are 0.33 m2 and 0.35 m2, respectively, and the roof and floor are more stable than the two sides. During mining, the area of instability greatly increases at first, then decreases to 0, and reaches a maximum value at the peak of the abutment pressure. The stability of the surrounding rock decreases first and then increases. Compared with the end anchoring bolt support, the full-length anchoring bolt support reduces the area of instability to a greater extent, and the full-length anchoring bolt support effect is better. The surrounding rock in the end anchoring zone and the full-length anchoring zone began to deform significantly at 200 m and 150 m from the working face, respectively. This indicates that the control effect of the full-length anchoring bolt support is better and verifies the rationality of the surrounding rock stability index to describe the instability characteristics. This research method can provide a theoretical reference for analysis of the stability characteristics and support design of different cross-section roadways.


2012 ◽  
Vol 164 ◽  
pp. 414-417
Author(s):  
Jia Ming Han

Commonly used finite element strength reduction to calculate the safety factor of slope,to analyze the stability of the slope[1~3]. Recently it also proposed the methods to evaluate the safety factor for the stability of surrounding rock of underground chambers and supporting structural mechanics[4~6]. For Qinling Mountains of the complex geological conditions in the Maanziliang highway tunnel, this article use the finite element method from the bolt resist tension, bolt length, the force of sprayed layer of concrete to computing gradeⅤsurrounding rock section of primary support safety factor, to give evaluation to support mechanics of the Maanziliang tunnel.


Sign in / Sign up

Export Citation Format

Share Document