scholarly journals Comprehensive Study on Surrounding Rock Failure Characteristics of Longwall Roadway and Control Techniques

2021 ◽  
Vol 11 (21) ◽  
pp. 9795
Author(s):  
Xiaojie Yang ◽  
Gang Yang ◽  
Ruifeng Huang ◽  
Yajun Wang ◽  
Jianning Liu ◽  
...  
Keyword(s):  
Principal Stress ◽  
Theoretical Calculations ◽  
Maximum Principal Stress ◽  
Surrounding Rock ◽  
Support Design ◽  
Geological Conditions ◽  
Concentration Degree ◽  
The Stability ◽  
Roadway Deformation ◽  
And Control

Research on underground coal mines has primarily focused on the stability of roadways. Mining activities lead to significant damage to the surrounding rocks and also degrade the support to the roadways. Considering the 21309 roadway of the Huojitu coal mine as a case study, this work comprehensively analyzed the characteristics of the surrounding rock using three methods: theoretical calculations, FLAC3D numerical modeling, and field observations. The results indicate that, under the influence of secondary mining, the failure range and stress concentration degree of the surrounding rock are considerably higher than those under the influence of primary mining. In this case, the maximum damage range in the surrounding rock can reach 1.8 m, the maximum principal stress can reach 19.82 MPa, and the ratio of the maximum principal stress to the minimum principal stress can reach 1.95. According to the results, the previous support design for roadways was optimized and applied in the field. Field monitoring revealed that the roadway deformation was effectively controlled, and the optimized support design was safe and reliable. This study is expected to serve as a reference for support designs or optimization under similar geological conditions.

scholarly journals Influence of Discontinuities on Rock Failure under Blasting at Shuangjiangkou Hydropower Station

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Xi Zhao ◽  
Bangbiao Wu ◽  
Liyuan Yu ◽  
Tieshuan Zhao ◽  
Zhonghua Hu
Keyword(s):  
Impact Resistance ◽  
Surrounding Rock ◽  
Hydropower Station ◽  
Dynamic Tests ◽  
Support Design ◽  
Failure Characteristics ◽  
Underground Caverns ◽  
Geological Conditions ◽  
The Stability ◽  
Surrounding Rock Deformation

The underground caverns of Shuangjiangkou hydropower station are under complex geological conditions. During excavation, the stability of the tunnels is severely affected by problems, such as blasting impact and excavation unloading, resulting in abnormal deformation at different locations. On the basis of on-site measurement, the characteristics of rocks at the main powerhouse and the main transformer room are compared through dynamic tests, and a numerical model is established using discrete element method (DEM) to analyze the special influence of fault SPD9-f1 on the deformation after excavation. It is revealed that the surrounding rock of the main powerhouse has stronger impact resistance than that of the main transformer room and that the existence of fault SPD9-f1 accounts for the abnormal deformation. In this study, the failure characteristics and mechanism of surrounding rock deformation controlled by stress and fault are revealed, providing important references for the subsequent excavation and support design of underground projects.

Numerical Simulation on Strengthening Supporting Mechanism and Effect of Anchor-Cables in Deep Coal Mine Roadway

2012 ◽  
Vol 170-173 ◽  
pp. 3512-3515
Author(s):  
Ju Cai Chang ◽  
Guang Xiang Xie
Keyword(s):  
Coal Mine ◽  
Surrounding Rock ◽  
Good Time ◽  
Lagrangian Analysis ◽  
Deformation And Failure ◽  
Deep Coal Mine ◽  
Geological Conditions ◽  
Stress States ◽  
The Stability ◽  
Roadway Deformation

Prestressed anchor-cables supporting technology has become the primary measure for reinforcing the roadway of deep coal mine and complex geological conditions. In this paper, fast Lagrangian analysis of continua (FLAC3D) code is used to analyze the laws of stress, deformation and failure of surrounding rock with and without roadway supporting by anchor-cables. The supporting action mechanism and effect of anchor-cables have been investigated into systematically. The results show that the anchor-cables supporting is adopted at reasonable positions of the roadway in good time which can improve the stress states of deep surrounding rock, decrease the range of failure zone around the roadway, control the roadway deformation effectively and maintain the stability of roadway.

scholarly journals An Analysis of the Impact of Deviatoric Stress and Spherical Stress on the Stability of Surrounding Rocks in Roadway

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Liu Rui ◽  
Zhu Quanjie
Keyword(s):  
Plastic Zone ◽  
Principal Stress ◽  
Tensile Deformation ◽  
Stress Component ◽  
Maximum Principal Stress ◽  
Surrounding Rock ◽  
Deviatoric Stress ◽  
Stress Difference ◽  
Deviator Stress ◽  
The Stability

In this study, a detailed analysis was conducted to evaluate the impacts of the deviatoric stress component and spherical stress component on the stability of surrounding rocks in the roadway via the theoretical analysis and calculation and numerical simulation. Based on the analysis, the distribution laws guiding the main stress differences, plastic zone, convergence of surrounding rocks, and third invariant of stress under various conditions (such as equal spherical stress and unequal deviatoric stress and equal deviatoric stress and unequal spherical stress) were developed, providing an optimization scheme for roadway support misunderstanding under the conditions of high spherical stress field and high deviator stress field. The study further reveals that under the circumstance of the constant spherical stress, the greater the deviatoric stress, the plastic zone range of the surrounding rock of the roadway, the range of tensile deformation of the surrounding rock, the amount of convergence of the surrounding rock, the probability of separation of the roof and floor of the roadway, and the principal stress difference and the main stress, the greater the concentration range of the maximum stress difference is, and the maximum principal stress difference is mainly concentrated in the roof and floor rocks of the roadway, and the greater the deviatoric stress, the greater the probability that the roof and floor rocks of the roadway will be separated, and the maximum principal stress difference is mainly concentrated in the roof and floor rocks of the roadway, the greater the deviator stress, the greater the concentration range of the maximum value of the principal stress difference and the principal stress difference; when the deviator stress is constant, the range of the plastic zone and the maximum principal stress difference concentration range of the surrounding rock of the roadway decrease with the increase of the ball stress, and the principal stress difference, the amount of convergence of the surrounding rock, and the range of tensile deformation increase with the increase of the ball stress. The maximum principal stress difference is mainly concentrated in the roof and floor rocks of the roadway. The principal stress difference increases with the increase of the spherical stress, and the maximum concentration range of the principal stress difference decreases with the increase of the spherical stress. After the method proposed in this paper optimizes the actual roadway support on site, the surrounding rock deformation of the roadway is small and the control is relatively ideal, which basically meets the engineering needs.

scholarly journals Study on instability failure mode and monitoring early warning standard of surrounding rock in fully weathered argillaceous sandstone section of large section tunnel

2019 ◽  
Vol 136 ◽  
pp. 04023
Author(s):  
Ming Zhao ◽  
Ke Li ◽  
Hong Yan Guo ◽  
KaiCheng Hua
Keyword(s):  
Limit State ◽  
Stable State ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Large Section ◽  
Rock Stability ◽  
Geological Conditions ◽  
Construction Step ◽  
The Face ◽  
The Stability

Based on the special geological conditions of a tunnel in Qingyuan section of Huizhou-Zhanzhou Expressway, FLAC3d numerical simulation software is used to simulate the rheological properties and instability of surrounding rock in large-section fully weathered sandstone section, and the stability and loss of surrounding rock are analyzed. The deformation of the dome and the face at steady state is analyzed. It is found that: 1) when the surrounding rock is in a stable state, the deformation curve of the dome is smooth. When the surrounding rock of the face is unstable, the front of the face appears ahead. Deformation should be first strengthened on the surrounding rock in front of the face. 2) The arched foot is an important part of the instability of the surrounding rock. In order to prevent the expansion of the collapsed part, the arched part should be reinforced. 3) In order to obtain the limit state of surrounding rock stability, the strength of surrounding rock is reduced, and the strength reduction coefficient corresponding to the displacement sudden point is taken as the safety factor of rock stability around the hole, and the stability safety coefficients of surrounding rock of each construction step are greater than 1.2. 4) The dynamic standard values of deformation control in the whole construction stage are obtained by analyzing the deformation curves of each data monitoring point with time in the corresponding time period of each construction step.

scholarly journals Study of the Stability Control of the Rock Surrounding Double-Key Strata Recovery Roadways in Shallow Seams

2019 ◽  
Vol 2019 ◽  
pp. 1-21 ◽  
Author(s):  
Cheng Zhu ◽  
Yong Yuan ◽  
Zhongshun Chen ◽  
Zhiheng Liu ◽  
Chaofeng Yuan
Keyword(s):  
Engineering Application ◽  
Stability Control ◽  
Surrounding Rock ◽  
Control Effect ◽  
Pressure Relief ◽  
Support Design ◽  
Key Strata ◽  
Fracture Development ◽  
Surrounding Rock Control ◽  
The Stability

The stability control of the rock surrounding recovery roadways guarantees the safety of the extraction of equipment. Roof falling and support crushing are prone to occur in double-key strata (DKS) faces in shallow seams during the extraction of equipment. Therefore, this paper focuses on the stability control of the rock surrounding DKS recovery roadways by combining field observations, theoretical analysis, and numerical simulations. First, pressure relief technology, which can effectively release the accumulated rock pressure in the roof, is introduced according to the periodic weighting characteristics of DKS roofs. A reasonable application scope and the applicable conditions for pressure relief technology are given. Considering the influence of the eroded area on the roof structure, two roof mechanics models of DKS are established. The calculation results show that the yield load of the support in the eroded area is low. A scheme for strengthening the support with individual hydraulic props is proposed, and then, the support design of the recovery roadway is improved based on the time effects of fracture development. The width of the recovery roadway and supporting parameters is redesigned according to engineering experience. Finally, constitutive models of the support and compacted rock mass in the gob are developed with FLAC3D software to simulate the failure characteristics of the surrounding rock during pressure relief and equipment extraction. The surrounding rock control effects of two support designs and three extraction schemes are comprehensively evaluated. The results show that the surrounding rock control effect of Scheme 1, which combines improved support design and the bidirectional extraction of equipment, is the best. Engineering application results show that Scheme 1 realizes the safe extraction of equipment. The research results can provide a reference and experience for use in the stability control of rock surrounding recovery roadways in shallow seams.

scholarly journals Analysis on Loose Circle of Surrounding Rock of Large Deformation Soft-Rock Tunnel

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Rui Wang ◽  
Yiyuan Liu ◽  
Xianghui Deng ◽  
Yu Zhang ◽  
Xiaodong Huang ◽  
...  
Keyword(s):  
Large Deformation ◽  
Theoretical Calculations ◽  
Rapid Development ◽  
Field Tests ◽  
Soft Rock ◽  
Strength Criterion ◽  
Surrounding Rock ◽  
Distribution Law ◽  
Geological Conditions ◽  
Rock Tunnel

With the rapid development of tunnel construction in China, deep buried and long tunnel projects are emerging in areas with complex engineering geological conditions and harsh environment, and thus large deformation of tunnels under conditions of high in situ stress and soft rock becomes increasingly prominent and endangers engineering safety. Therefore, it is of great significance to control the deformation and improve the stability of surrounding rock by analyzing the thickness and distribution law of loose circle according to the unique mechanical properties and failure mechanism of surrounding rock of large deformation soft-rock tunnel. Based on unified strength theory, this paper deduces the radius calculation formula of the loose circle by considering the influence of intermediate principal stress. Furthermore, the theoretical calculations and field tests of the loose circle in the typical sections of grade II and III deformation of Yuntunbao tunnel are carried out, and the thickness and distribution law of loose circle of surrounding rock of large deformation soft-rock tunnel is revealed. The results show that the formula based on the unified strength criterion is applicable for a large deformation tunnel in soft rock.

scholarly journals Study on the Instability Characteristics and Bolt Support in Deep Mining Roadways Based on the Surrounding Rock Stability Index: Example of Pansan Coal Mine

2020 ◽  
Vol 2020 ◽  
pp. 1-16 ◽  
Author(s):  
Jucai Chang ◽  
Kai He ◽  
Zhiqiang Yin ◽  
Wanfeng Li ◽  
Shihui Li ◽  
...  
Keyword(s):  
Coal Mine ◽  
Stability Index ◽  
Surrounding Rock ◽  
Full Length ◽  
Control Effect ◽  
Support Design ◽  
Rock Stability ◽  
Working Face ◽  
The Stability ◽  
Bolt Support

In view of the influence of mining stress on the stability of the surrounding rock of inclined roof mining roadways in deep mines, the surrounding rock stability index is defined and solved based on the rock strength criterion and the stress distribution. The mining roadway of the 17102(3) working face of the Pansan Coal Mine is used as the engineering background and example. The surrounding rock’ stabilities under the conditions of no support and bolt support are analyzed according to the surrounding rock’s stability index and the deformation data. The results show that the areas of low wall and high wall instability are 1.68 m2 and 2.12 m2, respectively, and the low wall is more stable than the high wall; the areas of the roof and floor instability are 0.33 m2 and 0.35 m2, respectively, and the roof and floor are more stable than the two sides. During mining, the area of instability greatly increases at first, then decreases to 0, and reaches a maximum value at the peak of the abutment pressure. The stability of the surrounding rock decreases first and then increases. Compared with the end anchoring bolt support, the full-length anchoring bolt support reduces the area of instability to a greater extent, and the full-length anchoring bolt support effect is better. The surrounding rock in the end anchoring zone and the full-length anchoring zone began to deform significantly at 200 m and 150 m from the working face, respectively. This indicates that the control effect of the full-length anchoring bolt support is better and verifies the rationality of the surrounding rock stability index to describe the instability characteristics. This research method can provide a theoretical reference for analysis of the stability characteristics and support design of different cross-section roadways.

Mechanics Analysis of Grade V Surrounding Rock Primary Support in Maanziliang Tunnel

2012 ◽  
Vol 164 ◽  
pp. 414-417
Author(s):  
Jia Ming Han
Keyword(s):  
Finite Element ◽  
Safety Factor ◽  
Surrounding Rock ◽  
Qinling Mountains ◽  
The Finite Element Method ◽  
Highway Tunnel ◽  
Geological Conditions ◽  
The Stability ◽  
Primary Support ◽  
Rock Section

Commonly used finite element strength reduction to calculate the safety factor of slope，to analyze the stability of the slope[1～3]. Recently it also proposed the methods to evaluate the safety factor for the stability of surrounding rock of underground chambers and supporting structural mechanics[4～6]. For Qinling Mountains of the complex geological conditions in the Maanziliang highway tunnel, this article use the finite element method from the bolt resist tension, bolt length, the force of sprayed layer of concrete to computing gradeⅤsurrounding rock section of primary support safety factor, to give evaluation to support mechanics of the Maanziliang tunnel.

scholarly journals Study on In Situ Stress Measurement and Surrounding Rock Control Technology in Deep Mine

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Zhongcheng Qin ◽  
Bin Cao ◽  
Yongle Liu ◽  
Tan Li
Keyword(s):  
Stress Field ◽  
Principal Stress ◽  
Coal Mine ◽  
Maximum Principal Stress ◽  
In Situ Stress ◽  
Measured Data ◽  
Surrounding Rock ◽  
In Situ Stress Measurement ◽  
Surrounding Rock Control

In situ stress is the direct cause of roadway deformation and failure in the process of deep mining activities. The measured data of in situ stress in the Shuanghe coal mine show that the maximum principal stress is 44.94~50.61 MPa, and the maximum principal stress direction is near horizontal direction, which belongs to tectonic stress field. The maximum horizontal principal stress is 1.66~1.86 of the vertical stress. The horizontal principal stress controls the deep stress field. According to the measured data of in situ stress, the high-strength prestress bolt and cable collaborative support form is designed in the Shuanghe coal mine. Based on the stress field research of bolt and cable, the optimal prestress ratio of bolt and cable is proposed as 3. When the prestress ratio of bolt and cable is constant, the smaller the length ratio of bolt and cable is, the better the effect of prestressed field formed by cooperative support is. The results are applied to the support design of the mining roadway in the Shuanghe coal mine. Through the field monitoring test results, it is found that the maximum roof subsidence is 86 mm, the maximum floor deformation is 52 mm, and the maximum deformation of two sides is 125 mm. The surrounding rock control effect of the roadway is good, and the surrounding rock deformation conforms to the engineering technology standard requirements. The research results of this paper can provide some reference for the surrounding rock support of high ground stress mining roadway under similar conditions.

scholarly journals The Stability of Gob-Side Entry Retaining in a High-Gas-Risk Mine

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Junwen Zhang ◽  
Yulin Li
Keyword(s):  
Coal Mines ◽  
Surrounding Rock ◽  
Shanxi Province ◽  
Engineering Practice ◽  
Efficient Production ◽  
Coal Recovery ◽  
Working Face ◽  
Geological Conditions ◽  
The Stability ◽  
Strengthening Technique

There are series of problems faced by most of the coal mines in China, ranging from low-coal recovery rate and strained replacement of working faces to gas accumulation in the upper corner of coalfaces. Based on the gob-side entry retaining at the No. 18205 working face in a coal mine in Shanxi Province, theoretical analysis, numerical simulation, and engineering practice were comprehensively used to study the mechanical characteristics of the influence of the width of the filling body beside the roadway and the stability of surrounding rock in a high-gas-risk mine. The rational width of the filling body beside the roadway was determined, and a concrete roadway-side support with a headed reinforcement-integrated strengthening technique was proposed, which have been applied in engineering practice. The stability of the filling body beside the roadway is mainly influenced by the movement of the overlying rock strata, and the stability of the surrounding rock can be improved effectively by rationally determining the width of the filling body beside the roadway. When the width of the roadway-side filling body is 2.5 m, the surrounding rock convergence of the gob-side entry retaining is relatively small at only 5% of the convergence ratio. It has been shown that the figure for roof separation is relatively low, and strata behaviors are relatively alleviated and gas density do not exceed the limit, which are the best results of gob-side entry retaining. The results of this research can provide theoretical guidance for excavation of coal mines with similar geological conditions and have some referential significance to safety and efficient production in coal mines.

Sign in / Sign up

Export Citation Format

Share Document