scholarly journals A Comparative Study on the Thermal Conductivity of Concrete with Coal Bottom Ash under Different Drying Conditions

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
In-Hwan Yang ◽  
Jihun Park ◽  
Kyoung-Chul Kim ◽  
Sung-Won Yoo
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Fly Ash ◽  
Ultrasonic Velocity ◽  
Bottom Ash ◽  
Unit Weight ◽  
Coal Bottom Ash ◽  
Concrete Mixtures ◽  
Drying Conditions

The utilization of coal bottom ash (CBA) and fly ash in concrete has become more common. For CBA concrete, curing conditions would influence the thermal properties of the concrete due to the high water absorption capacity of the CBA aggregate. In addition, CBA and fly ash contents in concrete affect the thermal properties of the concrete. Therefore, the effects of the drying conditions and the CBA and fly ash contents on the thermal conductivity of CBA concrete were investigated in this study. The thermal conductivity of concrete was measured under two different curing and drying conditions: oven-dried conditions and saturated surface-dry (SSD) conditions, with curing times of 28 and 91 days. The concrete mixtures also contained different levels of CBA and fly ash. Crushed sand in the concrete mixtures was replaced by CBA with replacement ratios of 25%, 50%, 75%, and 100% by volume. In addition, cement in the concrete mixture was substituted by fly ash with replacement ratios of 20 and 40% by volume. The thermal conductivity of concrete under the oven-dried conditions was much lower than that under the SSD conditions. Moreover, the thermal conductivity of the concrete decreased as the CBA content increased under both the oven-dried and SSD conditions. The material properties of the concrete, including unit weight, compressive strength, and ultrasonic velocity, were also measured in the study. Compared with the SSD conditions, the compressive strength, unit weight, and ultrasonic velocity of CBA concrete were considerably lower under the oven-dried conditions. Moreover, the relationships between the thermal conductivity and unit weight, compressive strength, and ultrasonic velocity were suggested.

scholarly journals A Study on the Thermal Properties of High-Strength Concrete Containing CBA Fine Aggregates

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1493 ◽  
Author(s):  
In-Hwan Yang ◽  
Jihun Park
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Ultrasonic Velocity ◽  
High Strength Concrete ◽  
High Strength ◽  
Unit Weight ◽  
Test Results ◽  
Strength Concrete ◽  
Fine Aggregates

The thermal conductivity of concrete is a key factor for efficient energy consumption in concrete buildings because thermal conductivity plays a significant role in heat transfer through concrete walls. This study investigated the effects of replacing fine aggregates with coal bottom ash (CBA) and the influence of curing age on the thermal properties of high-strength concrete with a compressive strength exceeding 60 MPa. The different CBA aggregate contents included 25%, 50%, 75%, and 100%, and different curing ages included 28 and 56 days. For concrete containing CBA fine aggregate, the thermal and mechanical properties, including the unit weight, thermal conductivity, compressive strength, and ultrasonic velocity, were measured. The experimental results reveal that the unit weight and thermal conductivity of the CBA concrete were highly dependent on the CBA content. The unit weight, thermal conductivity, and compressive strength of the concrete decreased as the CBA content increased. Relationships between the thermal conductivity and the unit weight, thermal conductivity and compressive strength of the CBA concrete were proposed in the form of exponential functions. The equations proposed in this study provided predictions that were in good agreement with the test results. In addition, the test results show that there was an approximately linear relationship between the thermal conductivity and ultrasonic velocity of the CBA concrete.

scholarly journals Mechanical and Thermal Properties of UHPC Exposed to High-Temperature Thermal Cycling

2019 ◽  
Vol 2019 ◽  
pp. 1-12
Author(s):  
In-Hwan Yang ◽  
Jihun Park
Keyword(s):  
Thermal Conductivity ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Thermal Properties ◽  
High Temperature ◽  
Thermal Cycling ◽  
Steel Fiber ◽  
Unit Weight ◽  
Maximum Temperature ◽  
Mechanical And Thermal Properties

The effects of high-temperature thermal cycling (temperatures up to 500°C) and steel fiber contents on the mechanical and thermal properties of ultrahigh-performance concrete (UHPC) containing polypropylene (PP) fibers were investigated in this study. The different maximum temperatures for thermal cycling included 300, 400, and 500°C. The mechanical properties, including the compressive strength and tensile strength, and thermal properties, including the unit weight and thermal conductivity, of the UHPC specimens were measured. The experimental results indicated that the compressive strength, tensile strength, unit weight, and thermal conductivity decreased as the temperature increased to 500°C. Test results showed that for each maximum temperature, the reduction of the thermal conductivities from one to six thermal cycles was not significant. The thermal conductivity of the UHPC decreased as the unit weight of the UHPC decreased, and the thermal conductivity also decreased as the compressive strength of the UHPC decreased. Scanning electron microscopy (SEM) analysis showed that the microstructures of the UHPC specimens exposed to high temperatures contained voids due to the PP fiber melting. The porosity of the UHPC specimens increased as the maximum temperature of the thermal cycles increased, which decreased the unit weights and thermal conductivities of the UHPC specimens. Moreover, the porosity at a temperature of 500°C increased by 60.0, 74.5, and 123.4% for steel fiber contents of 1.0, 1.5, and 2.0%, respectively. It might be due to incompatible thermal expansion between the concrete matrix and steel fiber.

Characterization of Power Plant Bottom Ash and its Application to Cement Mortar

2009 ◽  
Vol 620-622 ◽  
pp. 221-224
Author(s):  
Woo Teck Kwon ◽  
Byung Ik Kim ◽  
Y. Kim ◽  
Soo Ryong Kim ◽  
Sang Wook Ha
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Fly Ash ◽  
Power Plant ◽  
Building Material ◽  
Cement Mortar ◽  
Bottom Ash ◽  
Chemical Properties ◽  
Chemical Compositions

In this work, the physical & chemical properties of bottom ash generated from power plant are analyzed. Characteristic mortar property and thermal conductivity for building material were investigated with content of added bottom ash. According to the analytic result of bottom ash, chemical compositions of bottom ash is similar to those of fly ash and compressive strength after 7days related to pozzolanic activity shows 2.5N/cm2 and it is confirmed that bottom ash possess a certain amount of moisture activity. Although the fluidity of cement mortar is rapidly decreased with increasing addition of bottom ash, compressive strength for 3 and 7days is increased. The thermal conductivity is not sensitive to the addition of bottom ash.

scholarly journals Selected Strength Properties of Coal Bottom Ash (CBA) Concrete Containing Fly Ash under Different Curing and Drying Conditions

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5381
Author(s):  
Ji-Hun Park ◽  
Quang-The Bui ◽  
Sang-Hwa Jung ◽  
In-Hwan Yang
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Fly Ash ◽  
Bottom Ash ◽  
Ultrasonic Pulse Velocity ◽  
Strength Properties ◽  
Pulse Velocity ◽  
Splitting Tensile Strength ◽  
Fine Aggregates ◽  
Drying Conditions

This study aims to evaluate the effect of curing and drying conditions on the strength properties of concrete containing coal bottom ash (CBA) and fly ash as substitutes for fine aggregates and cement, respectively. The strength properties of the concrete including CBA and fly ash were evaluated under two different curing and drying conditions: saturated surface-dry (SSD) conditions and oven-dried conditions at curing ages of 28 and 91 days. The natural fine aggregates of the mixtures were replaced by CBA fine aggregates at 25%, 50%, 75%, and 100% by volume. In addition, the cement in the mixtures was partly replaced with fly ash at 20% and 40%. The experimental program included the measurement of the unit weight, compressive strength, splitting tensile strength, flexural strength, and ultrasonic pulse velocity of the concrete. The test results showed that the compressive strength, splitting tensile strength, and flexural strength decreased as the CBA content increased under both SSD and oven-dried conditions. The curing and drying conditions of the concrete with CBA and fly ash considerably influenced the reduction in the compressive, splitting, and flexural tensile strengths of the concrete. Additionally, the experimental results showed that fly ash insignificantly contributed to the reduction in the strength properties under both SSD and oven-dried conditions. Finally, the relationships between ultrasonic pulse velocity and the splitting tensile strength, flexural tensile strength, and compressive strength were investigated.

COMPRESSIVE STRENGTH AND THERMAL CONDUCTIVITY OF WATER AND AIR CURED PORTLAND CEMENT-FLY ASH-SILICA FUME MORTARS

2018 ◽  
Vol 17 (9) ◽  
pp. 2023-2030
Author(s):  
Arnon Chaipanich ◽  
Chalermphan Narattha ◽  
Watcharapong Wongkeo ◽  
Pailyn Thongsanitgarn
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Fly Ash ◽  
Portland Cement ◽  
Silica Fume

scholarly journals Reactivity of Ground Coal Bottom Ash to Be Used in Portland Cement

J ◽  
2021 ◽  
Vol 4 (3) ◽  
pp. 223-232
Author(s):  
Esperanza Menéndez ◽  
Cristina Argiz ◽  
Miguel Ángel Sanjuán
Keyword(s):  
Fly Ash ◽  
Coal Fly Ash ◽  
Bottom Ash ◽  
Blended Cement ◽  
Coal Ash ◽  
Pozzolanic Reaction ◽  
Natural Sand ◽  
Coal Bottom Ash ◽  
Novel Material ◽  
Pozzolanic Properties

Ground coal bottom ash is considered a novel material when used in common cement production as a blended cement. This new application must be evaluated by means of the study of its pozzolanic properties. Coal bottom ash, in some countries, is being used as a replacement for natural sand, but in some others, it is disposed of in a landfill, leading thus to environmental problems. The pozzolanic properties of ground coal bottom ash and coal fly ash cements were investigated in order to assess their pozzolanic performance. Proportions of coal fly ash and ground coal bottom ash in the mixes were 100:0, 90:10, 80:20, 50:50, 0:100. Next, multicomponent cements were formulated using 10%, 25% or 35% of ashes. In general, the pozzolanic performance of the ground coal bottom ash is quite similar to that of the coal fly ash. As expected, the pozzolanic reaction of both of them proceeds slowly at early ages, but the reaction rate increases over time. Ground coal bottom ash is a promising novel material with pozzolanic properties which are comparable to that of coal fly ashes. Then, coal bottom ash subjected to an adequate mechanical grinding is suitable to be used to produce common coal-ash cements.

scholarly journals Eco-Friendly Fired Brick Produced from Industrial Ash and Natural Clay: A Study of Waste Reuse

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 877 ◽  
Author(s):  
Neslihan Doğan-Sağlamtimur ◽  
Ahmet Bilgil ◽  
Magdalena Szechyńska-Hebda ◽  
Sławomir Parzych ◽  
Marek Hebda
Keyword(s):  
Compressive Strength ◽  
Bottom Ash ◽  
Unit Weight ◽  
Waste Reuse ◽  
Industrial Solid Waste ◽  
Second Stage ◽  
Before And After ◽  
Fired Bricks ◽  
Two Stages ◽  
And Storage

Bottom ash (BA) is an industrial solid waste formed by the burning of coal. The environmental problems and storage costs caused by this waste increase with every passing day. In this study, the use of BA as an additive (clay substitute) in fired brick production was investigated. The study consisted of two stages. In the first stage, cylinder blocks were produced from clay used in brick production. The second stage was the examination of the experimental substitution of clay with 10, 20, 30 and 40% BA. Samples were fired at 900, 1000, 1100 and 1150 °C to produce fired brick samples. The unit weight, compressive strength (before and after freeze–thawing) and water absorption were analyzed for the samples. The unit weight values decreased in the samples containing BA. The mechanical properties met the conditions prescribed in the relevant standards; i.e., all of the samples fired at 1100 and 1150 °C had a sufficient compressive strength over 20 MPa. The high potential of fired bricks for the construction industry was proved. BA can be used as a clay substitute, while the developed protocol can be used to effectively produce fired bricks.

Microstructure and Mechanical Properties of Ambiently-Cured Blended Coal Ash-Based Geopolymer Concrete

2016 ◽  
Vol 857 ◽  
pp. 400-404
Author(s):  
Tian Yu Xie ◽  
Togay Ozbakkaloglu
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Compressive Strength ◽  
Fly Ash ◽  
Bottom Ash ◽  
Coal Ash ◽  
Geopolymer Concrete ◽  
Mass Ratio ◽  
Blended Coal ◽  
Microstructure And Mechanical Properties

This paper presents the results of an experimental study on the behavior of fly ash-, bottom ash-, and blended fly and bottom ash-based geopolymer concrete (GPC) cured at ambient temperature. Four bathes of GPC were manufactured to investigate the influence of the fly ash-to-bottom ash mass ratio on the microstructure, compressive strength and elastic modulus of GPC. All the results indicate that the mass ratio of fly ash-to-bottom ash significantly affects the microstructure and mechanical properties of GPCs

Sign in / Sign up

Export Citation Format

Share Document