scholarly journals Smart insects repeller

Author(s):  
Suzi Seroja Sarnin ◽  
Nur Jumaatul Hidayati Binti Mohammad ◽  
Nani Fadzlina Naim ◽  
Norsuzila Ya’acob ◽  
Azlina Idris ◽  
...  

<span>One of the key issues for those involved in farming and greenhouse is the use of pesticides. In a recent headline, there has been an epidemic of insect infestation that has destroyed 211 hectares of rice plants. These concerns have led to the discussion of possible over-use of pesticides that are not just killing dangerous pests, but also other animals that help combat the pest. In order to overcome the problem, a research was conducted by introducing a smart insect killer.  In this developing project, Pyroelectric (PIR) sensor will be using as a motion detector towards insects. This sensor plays a role to transmit the signal for action in taking care of the plant. The IR sensors will install around the plant, so that it has good range to detect any motion. As a result, suitable chemical spray will trigger to repel these insects. A light emitting diode as an indicator of functional to the system.  "Smart Insect Repeller" will work when certain pests are detected and this will reduce the use of poisons and the quality of the crop will be preserved due to the use of minimal poisons.</span>

2018 ◽  
Vol 7 (2.8) ◽  
pp. 559
Author(s):  
Gowrishankar Kasilingam ◽  
K Nithiyananthan ◽  
Priyanka Ramesh Mani ◽  
Sunil Thomas

In this paper, a new improved Light Emitting Diode (LED) Display notice board with GSM technology has been created to plugs in all the drawbacks in existing framework. The proposed model has an excellent display notice board to display notices or messages at places that require real-time visibility, thereby transferring messages by Short Message Service (SMS) through cellular device. The proposed work in this paper elaborately narrates the procedure to construct a display notice board that has the quality of displaying messages in continuously running mode, and enabling the user to alter the ongoing message using SMS instantaneously. This system also has the feasibility to bind with other devices such as PC or laptop. The best feature of proposed system is the dual system for changing messages. And also utilizes two way power supply such as Renewable energy (Solar Power) and AC power. This feature enables the proposed model to work under any situations which overcomes the drawback in the existing display notice boards. Additionally, a motion detector has been included which turn ON or OFF the system automatically if any motion is not sensed.


Plants ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 960
Author(s):  
Jenny Manuela Tabbert ◽  
Hartwig Schulz ◽  
Andrea Krähmer

A light-emitting diode (LED) system covering plant-receptive wavebands from ultraviolet to far-red radiation (360 to 760 nm, “white” light spectrum) was investigated for greenhouse productions of Thymus vulgaris L. Biomass yields and amounts of terpenoids were examined, and the lights’ productivity and electrical efficiency were determined. All results were compared to two conventionally used light fixture types (high-pressure sodium lamps (HPS) and fluorescent lights (FL)) under naturally low irradiation conditions during fall and winter in Berlin, Germany. Under LED, development of Thymus vulgaris L. was highly accelerated resulting in distinct fresh yield increases per square meter by 43% and 82.4% compared to HPS and FL, respectively. Dry yields per square meter also increased by 43.1% and 88.6% under LED compared to the HPS and FL lighting systems. While composition of terpenoids remained unaffected, their quantity per gram of leaf dry matter significantly increased under LED and HPS as compared to FL. Further, the power consumption calculations revealed energy savings of 31.3% and 20.1% for LED and FL, respectively, compared to HPS. In conclusion, the implementation of a broad-spectrum LED system has tremendous potential for increasing quantity and quality of Thymus vulgaris L. during naturally insufficient light conditions while significantly reducing energy consumption.


Endoscopy ◽  
2016 ◽  
Vol 48 (10) ◽  
pp. 934-938 ◽  
Author(s):  
Sho Sasaki ◽  
Jun Nishikawa ◽  
Hideo Yanai ◽  
Munetaka Nakamura ◽  
Junichi Nishimura ◽  
...  

2009 ◽  
Vol 1192 ◽  
Author(s):  
Jesse J Cole ◽  
Heiko Jacobs

AbstractWe report a new integration approach to produce arrays of ZnO microcrystals for optoelectronic and photovoltaic applications. Demonstrated applications are n-ZnO/p-GaN heterojunction LEDs and photovoltaic cells. The integration process uses an oxygen plasma treatment in combination with a photoresist pattern on Magnesium doped GaN substrates to define a narrow sub-100nm width nucleation region. ZnO is synthesized in the defined areas by a hydrothermal technique using zinc acetate and hexamethylenetetramine precursors. Nucleation is followed by lateral epitaxial overgrowth producing single crystal disks of ZnO. The process provides control over the dimension and location of the ZnO crystals. The quality of the patterned ZnO is high; the commonly observed defect related emission in the electroluminescence spectra is suppressed and a single near-band-edge UV peak is observed. Transfer printing of the ZnO microcrystals onto a flexible substrate is also demonstrated in the context of transparent flexible electronics.


2013 ◽  
Vol 378 ◽  
pp. 440-443
Author(s):  
Chiu Jung Yang ◽  
Chien Sheng Huang ◽  
Chih Wei Chen ◽  
Po Wen Chen

Thepaperis discussedin coloruniformity study.The experiment divided into two steps in this study,first is modules design and simulation. Second is fabrication and measurement.After measure the LEDs property, calculating the ratio of each colored LEDs by using Grassmanns Law,modeling by Solidworks, and simulating the front study by optical software TracePro.Using four-color mixing with self-developed formula to avoid the present white light emitting diode patent, and the four-color grains are Red, Green, Blue and adding Y to modify the overall quality of the mixed light.The phosphorproduceSteabler-Wronsk hardly in the high temperatureas compared tofour-color mixing.Using four-color mixing to producehigher color rendering index than yellow phosphor.Series-parallel array of grain arrangement adopted to achieve the high demand for uniformity, while simplifying the design conditions by a certain current instead of the general mixed light-driven complex driver circuit,the completion of the mixing module using integrating sphere, light spectrum on the spectrophotometer, optical power, color coordinates values, such as mixing uniformity measurements.The chromaticity coordinates errors after complete results of the mixing module measurement and simulation can be controlled under (0.01x, 0.01y).


2010 ◽  
Vol 139-141 ◽  
pp. 1433-1437
Author(s):  
Kai Lin Pan ◽  
Jiao Pin Wang ◽  
Jing Liu ◽  
Guo Tao Ren

Heat dissipation and cost are the key issues for light-emitting diode (LED) packaging. In this paper, based on the thermal resistance network model of LED packaging, three-dimensional heat dissipation model of high power multi-chip LED packaging is developed and analyzed with the application of finite element method. Temperature distributions of the current multi-chip LED packaging model are investigated systematically under the different materials of the chip substrate, die attach, and/or different structures of the heat sink and fin. The results show that the junction temperature can be decreased effectively by increasing the height of the heat sink, the width of the fin, and the thermal conductivity of the chip substrate and die attach materials. The lower cost and higher reliability for LED source can be obtained through reasonable selection of materials and structure parameters of the LED lighting system.


2016 ◽  
Vol 41 (3) ◽  
pp. E13 ◽  
Author(s):  
Sunil Manjila ◽  
Margherita Mencattelli ◽  
Benoit Rosa ◽  
Karl Price ◽  
Georgios Fagogenis ◽  
...  

OBJECTIVE Rigid endoscopes enable minimally invasive access to the ventricular system; however, the operative field is limited to the instrument tip, necessitating rotation of the entire instrument and causing consequent tissue compression while reaching around corners. Although flexible endoscopes offer tip steerability to address this limitation, they are more difficult to control and provide fewer and smaller working channels. A middle ground between these instruments—a rigid endoscope that possesses multiple instrument ports (for example, one at the tip and one on the side)—is proposed in this article, and a prototype device is evaluated in the context of a third ventricular colloid cyst resection combined with septostomy. METHODS A prototype neuroendoscope was designed and fabricated to include 2 optical ports, one located at the instrument tip and one located laterally. Each optical port includes its own complementary metal-oxide semiconductor (CMOS) chip camera, light-emitting diode (LED) illumination, and working channels. The tip port incorporates a clear silicone optical window that provides 2 additional features. First, for enhanced safety during tool insertion, instruments can be initially seen inside the window before they extend from the scope tip. Second, the compliant tip can be pressed against tissue to enable visualization even in a blood-filled field. These capabilities were tested in fresh porcine brains. The image quality of the multiport endoscope was evaluated using test targets positioned at clinically relevant distances from each imaging port, comparing it with those of clinical rigid and flexible neuroendoscopes. Human cadaver testing was used to demonstrate third ventricular colloid cyst phantom resection through the tip port and a septostomy performed through the lateral port. To extend its utility in the treatment of periventricular tumors using MR-guided laser therapy, the device was designed to be MR compatible. Its functionality and compatibility inside a 3-T clinical scanner were also tested in a brain from a freshly euthanized female pig. RESULTS Testing in porcine brains confirmed the multiport endoscope's ability to visualize tissue in a blood-filled field and to operate inside a 3-T MRI scanner. Cadaver testing confirmed the device's utility in operating through both of its ports and performing combined third ventricular colloid cyst resection and septostomy with an endoscope rotation of less than 5°. CONCLUSIONS The proposed design provides freedom in selecting both the number and orientation of imaging and instrument ports, which can be customized for each ventricular pathological entity. The lightweight, easily manipulated device can provide added steerability while reducing the potential for the serious brain distortion that happens with rigid endoscope navigation. This capability would be particularly valuable in treating hydrocephalus, both primary and secondary (due to tumors, cysts, and so forth). Magnetic resonance compatibility can aid in endoscope-assisted ventricular aqueductal plasty and stenting, the management of multiloculated complex hydrocephalus, and postinflammatory hydrocephalus in which scarring obscures the ventricular anatomy.


Medicine ◽  
2018 ◽  
Vol 97 (37) ◽  
pp. e12264 ◽  
Author(s):  
Carlos Alberto Tenis ◽  
Manoela Domingues Martins ◽  
Marcela Leticia Leal Gonçalves ◽  
Daniela de Fátima Teixeira da Silva ◽  
João Júlio da Cunha Filho ◽  
...  

2021 ◽  
Author(s):  
Lung-Chien Chen ◽  
Yen-Hung Tien ◽  
Jianjun Tian

Abstract In this work, trioctylphosphine oxide (TOPO) ligand is employed to improve the quality of CsPbBr1.2I1.8 quantum dots (QDs) films. Lead nitrate (Pb(NO3)2) is also used to passivate the surface of the films. The study of ligand and surface passivation on the luminous efficiency of red light-emitting diode (LED) is discussed. The CsPbBr1.2I1.8 QDs films co-doped with TOPO and Pb(NO3)2 can effectively improve the performance of the CsPbBr1.2I1.8 QDs LEDs due to reduction of non-radiation recombination of the carriers and smooth morphology in the active layer, thus improving the injection and transportation capabilities of carriers. As a result, the highest luminosity and current efficiency are 502.7 cd/m2 and 0.175 cd/A, respectively.


Author(s):  
David Baeza Moyano ◽  
Roberto Alonso González Lezcano

Office work has so far been carried out in company buildings and was largely based on the use of paper on a horizontal surface. Due to multiple reasons, more workers are working in their homes with electronic devices. As a result, both the working environment and personal tools are changing. Since the discovery about 20 years ago of the non-visual ways of light absorption, it was known that apart from the image forming effects (IF) of light from which the criteria for correct lighting have been developed, non-image forming effects (NIF) of light exist. The discovery of NIF has enhanced researcher belief in the importance of daylighting and has raised new criteria to be taken into account for proper interior lighting. Due to all the factors mentioned above, the parameters to be met by a luminaire and its environment for proper lighting of the workstation have been modified and expanded. The rapid advance in the development of new light-emitting diode (LED) luminaires with which the spectral power distribution (SPD) can be practically created opens the door to a genuine technological revolution comparable to the invention of electric lighting around 150 years ago. The authors of this study will review the latest published studies on the importance of light in our lives, IF and NIF effects of light, the parameters which from these effects are suggested to be taken into account for a correct indoor lighting, the regulations in force on indoor lighting workplaces, and proposals to improve indoor lighting and therefore the quality of life of workers.


Sign in / Sign up

Export Citation Format

Share Document