X-Ray Debye Temperature Study of Zinc Nano Particles

2014 ◽  
Vol 3 (2) ◽  
pp. 125-129
Author(s):  
E. Purushotham
Keyword(s):  
Debye Temperature ◽  
Nano Particles ◽  
X Ray ◽  
Temperature Study

A New Polyethylene Corrosion Protecting Coating with Ion Selectivity

2011 ◽  
Vol 314-316 ◽  
pp. 273-278
Author(s):  
Yu Hua Dong ◽  
Ke Ren ◽  
Qiong Zhou
Keyword(s):  
Ion Selectivity ◽  
Nano Particles ◽  
Ammonium Bromide ◽  
Linear Low Density Polyethylene ◽  
X Ray Diffraction ◽  
Sulfosalicylic Acid ◽  
X Ray ◽  
Chemically Modified ◽  
Before And After ◽  
Industrial Standards

Linear low density polyethylene (LLDPE) was chemically modified with grafting maleic anhydride (MAH) monomer on its backbone by melting blending. Nano-particles SiO2 was modified by cationic surfactant hexadecyl trimethyl ammonium bromide (CTAB) and anionic surfactant sulfosalicylic acid (SSA) and added to PE coating respectively. Measurement of membrane potential showed that the coating containing modified SiO2 nano-particles had characteristic of ion selectivity. The properties of the different coatings were investigated according to relative industrial standards. Experimental results indicated that PE coating with ion selectivity had better performances, such as adhesion strength, cathodic disbonding and anti-corrosion, than those of coating without ion selectivity. Crystal structure of the coatings before and after alkali corrosion was characterized by Fourier transform infrared spectra (FTIR) and X-ray diffraction (XRD). Structure of the coating without ion selectivity was damaged by NaOH alkali solution, causing mechanical properties being decreased. And the structure of the ion selective coatings was not affected.

X‐ray determination of the Debye temperature at high pressure using high‐energy synchrotron radiation

1990 ◽  
Vol 68 (6) ◽  
pp. 2719-2722 ◽  
Author(s):  
A. Matsumuro ◽  
M. Kobayashi ◽  
T. Kikegawa ◽  
M. Senoo
Keyword(s):  
High Pressure ◽  
Synchrotron Radiation ◽  
Debye Temperature ◽  
High Energy ◽  
X Ray

X-Ray Determination of the Debye Temperature of Uranium Monocarbide

1969 ◽  
Vol 36 (1) ◽  
pp. 135-142 ◽  
Author(s):  
R. Colella ◽  
D. Dragone ◽  
A. Merlini
Keyword(s):  
Debye Temperature ◽  
X Ray ◽  
Uranium Monocarbide

Synthesis of Nanosized HMS Mesoporous Molecular Sieve in an Ionic Liquid-Water Mixture

2011 ◽  
Vol 236-238 ◽  
pp. 2110-2113
Author(s):  
Hong Liu ◽  
Meng Yang Wang ◽  
Wei Ran Cao
Keyword(s):  
Electron Microscopy ◽  
Ionic Liquid ◽  
Sol Gel ◽  
Mesoporous Molecular Sieve ◽  
Nano Particles ◽  
Water Mixture ◽  
X Ray ◽  
Transmission Electron ◽  
Adsorption Desorption ◽  
Synthesized Materials

The hexagonal mesoporous silica (HMS) nano-particles were prepared in mixture of 1-butyl-3-methyl-imidazolium tetrafluoroborate (BMIM+BF4-) ionic liquid and water by a sol-gel method. The structure and morphology of obtained materials were characterized by X-ray powder diffraction (XRD), N2adsorption-desorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and dynamic light scattering (DLS). The influence of the amount of BMIM+BF4-was investigated. It was shown that the synthesized materials have discrete and uniform spherical morphology with the size in the range of 68-177 nm (obtained from DLS measurements), and the particle size of HMS can be controlled by varying the amount of BMIM+BF4-.

scholarly journals Copper Containing Glass-Based Bone Adhesives for Orthopaedic Applications: Glass Characterization and Advanced Mechanical Evaluation

2020 ◽  
Author(s):  
Sahar. Mokhtari ◽  
Anthony.W. Wren
Keyword(s):  
Mechanical Properties ◽  
Photoelectron Spectroscopy ◽  
Structural Changes ◽  
Viscoelastic Behavior ◽  
Polymer Chains ◽  
Nano Particles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Compression Data

AbstractThis study addresses issues with currently used bone adhesives, by producing novel glass based skeletal adhesives through modification of the base glass composition to include copper (Cu) and by characterizing each glass with respect to structural changes. Bioactive glasses have found applications in fields such as orthopedics and dentistry, where they have been utilized for the restoration of bone and teeth. The present work outlines the formation of flexible organic-inorganic polyacrylic acid (PAA) – glass hybrids, commercial forms are known as glass ionomer cements (GICs). Initial stages of this research will involve characterization of the Cu-glasses, significant to evaluate the properties of the resulting adhesives. Scanning electron microscopy (SEM) of annealed Cu glasses indicates the presence of partial crystallization in the glass. The structural analysis of the glass using Raman suggests the formation of CuO nanocrystals on the surface. X-ray diffraction (XRD) pattern and X-ray photoelectron spectroscopy (XPS) further confirmed the formation of crystalline CuO phases on the surface of the annealed Cu-glass. The setting reaction was studied using Fourier transform infrared spectroscopy (ATR-FTIR). The mechanical properties of the Cu containing adhesives exhibited gel viscoelastic behavior and enhanced mechanical properties when compared to the control composition. Compression data indicated the Cu glass adhesives were efficient at energy dissipation due to the reversible interactions between CuO nano particles and PAA polymer chains.

scholarly journals Photoluminescences properties of lanthanum-silver co-doped ZnO nano particles

2018 ◽  
Vol 4 (4) ◽  
pp. 135-141 ◽  
Author(s):  
V. Porkalai ◽  
B. Sathya ◽  
D. Benny Anburaj ◽  
G Nedunchezhian ◽  
S. Joshua Gnanamuthu ◽  
...  
Keyword(s):  
Zno Nanoparticles ◽  
Zinc Acetate Dihydrate ◽  
Average Particle Size ◽  
Semiconductor Nanoparticles ◽  
Nano Particles ◽  
Average Particle ◽  
Rare Earth Ion ◽  
X Ray ◽  
Doped Zno ◽  
Co Doped

Recently, transition metal (TM) and rare earth ion doped II–VI semiconductor nanoparticles have received much attention because such doping can modify and improve optical properties of II–VI semiconductor nanoparticles by large amount. In this study, undoped, La doped and La+Ag co-doped ZnO nano particles have been successfully synthesized by sol-gel method using the mixture of Zinc acetate dihydrate and ethanol solution. The powders were calcinated at 600 °C for 2 h. The effect of lanthanum and lanthanum-silver incorporation on the structure, morphology, optical and electrical conductivity were examined by X-ray diffraction (XRD), Scanning Electron Microscope (SEM), Energy Dispersive X-ray Absorption (EDAX), Fourier transform infrared spectroscopy (FTIR), UV and Photo Luminescence (PL) Characterization. The average particle size of the synthesized ZnO nanoparticles is calculated using the Scherrer formula and is found to be of less than 20 nm. Luminescences properties were found to be enhanced for the La and La+Ag co-doped ZnO nanoparticles.

Study on Preparation and Photocatalytic Performance of Co-Doped TiO2 with Cu and Ce

2011 ◽  
Vol 399-401 ◽  
pp. 722-726 ◽  
Author(s):  
Jiang Ping Zhao ◽  
Xiao Ni Yang ◽  
Hao Zhang
Keyword(s):  
Photocatalytic Performance ◽  
Sol Gel ◽  
Test Chamber ◽  
Raw Material ◽  
Nano Particles ◽  
Molar Ratio ◽  
X Ray ◽  
Co Doping ◽  
Photocatalytic Activities ◽  
Environmental Test

In this paper, Cu-Ce/TiO2nano-particles, whose molar ratio account for 2%,2.5%,3%,3.5% and 4% respectively, were synthesized by sol-gel method, using Ti(C4H9O)4as the raw material, And the photocatalytic activities of the prepared samples were investigated by degrading formaldehyde gas under pure visible light through simulating indoor environment in the environmental test chamber. Moreover, X-Ray Powder Diffraction (XRD) and Ultraviolet-visible spectrophotometer were applied to analyze the crystallite size and optical properties of the samples. It is indicated that the sample of 2.5% performs best in the test. Besides, photocatalytic mechanism of co-doping of Cu-Ce was discussed.

Sign in / Sign up

Export Citation Format

Share Document