scholarly journals Carbon Nanotube-Based Sensors

2006 ◽  
Vol 6 (3) ◽  
pp. 573-590 ◽  
Author(s):  
Niraj Sinha ◽  
Jiazhi Ma ◽  
John T. W. Yeow
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Cost Effective ◽  
Development Work ◽  
Future Research ◽  
Reference Source ◽  
Main Thrust ◽  
Real World Applications ◽  
New Applications

Sensors continue to make significant impact in everyday life. There has been a strong demand for producing highly selective, sensitive, responsive, and cost effective sensors. As a result, research emphasis is on developing new sensing materials and technologies. Carbon nanotubes (CNTs) have many distinct properties that may be exploited to develop next generation of sensors. This manuscript reviews the distinct physical, electronic, and mechanical properties of CNTs. The main thrust of this review is to highlight the present and future research and development work in the area of carbon nanotube sensors for real-world applications. The technical challenges associated with CNT-based sensors, which remain to be fully addressed, have also been outlined at the end of the manuscript. This review aims to act as a reference source for researchers to help them in developing new applications of CNT-based sensors.

Mechanical Properties Of Polyaniline / Multi-walled Carbon Nanotube Composite Films

2003 ◽  
Vol 791 ◽  
Author(s):  
P. C. Ramamurthy ◽  
W. R. Harrell ◽  
R. V. Gregory ◽  
B. Sadanadan ◽  
A. M. Rao
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Composite Films ◽  
Weight Percent ◽  
Organic Electronic Devices ◽  
Multiwalled Carbon ◽  
Multi Walled Carbon Nanotube ◽  
Contact Devices ◽  
Carbon Nanotube Composite

ABSTRACTHigh molecular weight polyaniline / multi-walled carbon nanotube composite films were fabricated using solution processing. Composite films with various weight percentages of multiwalled carbon nanotubes were fabricated. Physical properties of these composites were analyzed by thermogravimetric analysis, tensile testing, and scanning electron microscopy. These results indicate that the addition of multiwalled nanotubes to polyaniline significantly enhances the mechanical properties of the films. In addition, metal–semiconductor (composite) (MS) contact devices were fabricated, and it was observed that the current level in the films increased with increasing multiwalled nanotube content. Furthermore, it was observed that polyaniline containing one weight percent of carbon nanotubes appears to be the most promising composition for applications in organic electronic devices.

Electronic and Mechanical Properties of Super Carbon Nanotube Networks

2006 ◽  
Vol 963 ◽  
Author(s):  
Vitor R. Coluci ◽  
Socrates O. Dantas ◽  
Ado Jorio ◽  
Douglas s Galvao
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Tight Binding ◽  
Deformation Mechanisms ◽  
Different Types ◽  
Dynamics Simulations ◽  
Walled Carbon Nanotubes ◽  
Carbon Nanotube Networks ◽  
Main Deformation

ABSTRACTEletronic and mechanical properties of ordered carbon nanotube networks are studied using molecular dynamics simulations and tight-binding calculations. These networks are formed by single walled carbon nanotubes (SWNT) regularly connected by junctions. The use of different types of junctions (“Y”-, “X”-like junctions, for example) allows the construction of networks with different symmetries. These networks can be very flexible and the elastic deformation was associated with two main deformation mechanisms (bending and stretching ) of the constituents SWNTs. Rolling up the networks, “super” carbon nanotubes can be constructed. These super-tubes share some of the main electronic features of the SWNT which form them but important changes are predicted (e.g. reduction of bandgap value). Simulations of their deformations under tensile stress have revealed that the super-tubes are softer than the corresponding SWNT and that their rupture occur in higher strain values.

The influence of functionalization time of carbon nanotube on the mechanical properties of the epoxy composites

2017 ◽  
Vol 51 (12) ◽  
pp. 1693-1701 ◽  
Author(s):  
EA Zakharychev ◽  
EN Razov ◽  
Yu D Semchikov ◽  
NS Zakharycheva ◽  
MA Kabina
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Tensile Strength ◽  
Elastic Modulus ◽  
Carbon Nanotube ◽  
Composite Materials ◽  
Polymer Composites ◽  
Epoxy Composites ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

This paper investigates the structure, length, and percentage of functional groups of multi-walled carbon nanotubes (CNT) depending on the time taken for functionalization in HNO3 and H2SO4 mixture. The carbon nanotube content and influence of functionalization time on mechanical properties of polymer composite materials based on epoxy matrix are studied. The extreme dependencies of mechanical properties of carbon nanotube functionalization time of polymer composites were established. The rise in tensile strength of obtained composites reaches 102% and elastic modulus reaches 227% as compared to that of unfilled polymer. The composites exhibited best mechanical properties by including carbon nanotube with 0.5 h functionalization time.

Characterization of Mechanical Properties of Carbon Nanotubes in Copper-Matrix Nanocomposites

2006 ◽  
Author(s):  
Seunghyun Baik ◽  
Byeongsoo Lim ◽  
Bumjoon Kim ◽  
Untae Sim ◽  
Seyoung Oh ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Pure Copper ◽  
Copper Matrix ◽  
Mixing Process ◽  
Mechanical Mixing ◽  
Matrix Nanocomposites ◽  
Coated Carbon

Carbon nanotubes have received considerable attention because of their excellent mechanical properties. In this study, carbon nanotube - copper composites have been sintered by a mechanical mixing process. The interfacial bonding between nanotubes and the copper matrix was improved by coating nanotubes with nickel. Sintered pure copper samples were used as control materials. The displacement rate of nanotube-copper composites was found to increase at 200°C whereas that of nickel-coated nanotue-copper composites significantly decreased. The incorporation of carbon nanotubes and nickel-coated carbon nanotubes in the copper matrix decreased friction coefficients and increased the time up to the onset of scuffing compared with those of pure copper specimens.

scholarly journals Fabrication and Characterization of Polylactic Acid Electrospun Scaffolds Modified with Multi-Walled Carbon Nanotubes and Hydroxyapatite Nanoparticles

Biomimetics ◽  
2020 ◽  
Vol 5 (3) ◽  
pp. 43
Author(s):  
Athanasios Kotrotsos ◽  
Prokopis Yiallouros ◽  
Vassilis Kostopoulos
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Polylactic Acid ◽  
Physical And Mechanical Properties ◽  
Polymeric Materials ◽  
Cost Effective ◽  
Electrospinning Process ◽  
Wide Range ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

The solution electrospinning process (SEP) is a cost-effective technique in which a wide range of polymeric materials can be electrospun. Electrospun materials can also be easily modified during the solution preparation process (prior SEP). Based on this, the aim of the current work is the fabrication and nanomodification of scaffolds using SEP, and the investigation of their porosity and physical and mechanical properties. In this study, polylactic acid (PLA) was selected for scaffold fabrication, and further modified with multi-walled carbon nanotubes (MWCNTs) and hydroxyapatite (HAP) nanoparticles. After fabrication, porosity calculation and physical and mechanical characterization for all scaffold types were conducted. More precisely, the morphology of the fibers (in terms of fiber diameter), the surface properties (in terms of contact angle) and the mechanical properties under the tensile mode of the fabricated scaffolds have been investigated and further compared against pristine PLA scaffolds (without nanofillers). Finally, the scaffold with the optimal properties was proposed as the candidate material for potential future cell culturing.

Mechanical Properties of Functionalized Carbon Nanotube as Reinforcements

2012 ◽  
Vol 583 ◽  
pp. 22-26 ◽  
Author(s):  
Cui Cui Ling ◽  
Qing Zhong Xue ◽  
Xiao Yan Zhou
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Molecular Dynamics ◽  
Carbon Nanotube ◽  
Binding Energy ◽  
Functional Groups ◽  
Functional Group ◽  
Young Modulus ◽  
Electrostatic Energy ◽  
Walled Cnts

The effects of functional groups and degree of functionalization on the young modulus of carbon nanotubes (CNTs) are investigated through molecular dynamics and molecular mechanics simulations. It is found that young’s modulus depends greatly on the functional groups and degree of functionalization. The results show that the fluorine (-F) can replace the hydrogen, and young modulus of sing-walled CNTs (SWNT) modified by -F functional group can inherit the mechanical properties of intrinsic SWNT. The binding energy between functional groups and SWNT, and electrostatic energy among the functional groups are mainly responsible for these findings. These characteristics rival those of SWNT modified by hydrogen allow one to consider SWNT modified by -F functional group for a range of technologies, in particular require better inertness and stability than unachievable for the compound.

Evaluation of mechanical and dynamic mechanical properties of multiwalled carbon nanotube-based ethylene–propylene copolymer composites mixed by masterbatch dilution

2016 ◽  
Vol 50 (29) ◽  
pp. 4093-4101 ◽  
Author(s):  
Maija Hoikkanen ◽  
Minna Poikelispää ◽  
Amit Das ◽  
Uta Reuter ◽  
Wilma Dierkes ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Aspect Ratio ◽  
Melt Mixing ◽  
Multiwalled Carbon ◽  
Mixing Processes ◽  
Ethylene Propylene ◽  
Dynamic Mechanical ◽  
Mixing Method

A two-step masterbatch mixing technique was studied for preparation of carbon nanotube-filled ethylene–propylene diene elastomer compounds, and compared to conventional one-step mixing process. In the two-step process, a masterbatch compound with carbon nanotube content of 50 parts per hundred was prepared by melt-mixing ethylene–propylene diene elastomer. This material was then compounded with pristine ethylene–propylene diene elastomer and composites with different carbon nanotube concentrations were compared. The aim of this study is to compare the efficiency of two different mixing processes on the dispersion of carbon nanotubes and to facilitate the handling of carbon nanotubes, as the masterbatch can be prepared in a controlled way and used for further dilution without the problems related to carbon nanotube processing. The compound properties were studied with emphasis on mechanical characterization and dynamic mechanical thermal analysis. Masterbatch mixing resulted in the similar mechanical properties of the composites compared to the direct mixing method. At the relatively low loadings of carbon nanotubes, the considerable improvements of the mechanical properties were observed. The aspect ratio of the carbon nanotubes determined by transmission electron microscope was found to be similar to the one calculated from the Guth equation. It showed a considerable reduction in aspect ratio independent of the used mixing method.

Sign in / Sign up

Export Citation Format

Share Document