Influence of Sol–Gel Conditions on the Growth of Thiol-Functionalized Silsesquioxanes Prepared by In Situ Water Production

2016 ◽  
Vol 16 (3) ◽  
pp. 3030-3038 ◽  
Author(s):  
Evgeny Borovin ◽  
Emanuela Callone ◽  
Benjamin Papendorf ◽  
Graziano Guella ◽  
Sandra Diré
Keyword(s):  
Sol Gel ◽  
Water Production

In-Situ Study of NiO Growth on Textured Nickel Tape Using Environmental Scanning Electron Microscope (ESEM) and Hot Stage

2001 ◽  
Vol 7 (S2) ◽  
pp. 1276-1277
Author(s):  
Y. Akin ◽  
R.E. Goddard ◽  
W. Sigmund ◽  
Y.S. Hascicek
Keyword(s):  
Buffer Layer ◽  
Lattice Mismatch ◽  
Sol Gel ◽  
Surface Oxidation ◽  
Dip Coating ◽  
Buffer Layers ◽  
Superconducting Film ◽  
Environmental Scanning ◽  
Cold Rolling And Annealing

Deposition of highly textured ReBa2Cu3O7−δ (RBCO) films on metallic substrates requires a buffer layer to prevent chemical reactions, reduce lattice mismatch between metallic substrate and superconducting film layer, and to prevent diffusion of metal atoms into the superconductor film. Nickel tapes are bi-axially textured by cold rolling and annealing at appropriate temperature (RABiTS) for epitaxial growth of YBa2Cu3O7−δ (YBCO) films. As buffer layers, several oxide thin films and then YBCO were coated on bi-axially textured nickel tapes by dip coating sol-gel process. Biaxially oriented NiO on the cube-textured nickel tape by a process named Surface-Oxidation- Epitaxy (SEO) has been introduced as an alternative buffer layer. in this work we have studied in situ growth of nickel oxide by ESEM and hot stage.Representative cold rolled nickel tape (99.999%) was annealed in an electric furnace under 4% hydrogen-96% argon gas mixture at 1050°C to get bi-axially textured nickel tape.

scholarly journals Carbon Nitride Quantum Dots Modified TiO2 Inverse Opal Photonic Crystal for Solving Indoor VOCs Pollution

Catalysts ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 464
Author(s):  
Jie Yu ◽  
Angel Caravaca ◽  
Chantal Guillard ◽  
Philippe Vernoux ◽  
Liang Zhou ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Carbon Nitride ◽  
Sol Gel ◽  
Green Energy ◽  
Inverse Opal ◽  
Oxidation Reactions ◽  
Composite Photocatalyst ◽  
Colloidal Photonic Crystals ◽  
Inverse Opal Structure

Indoor toxic volatile organic compounds (VOCs) pollution is a serious threat to people’s health and toluene is a typical representative. In this study, we developed a composite photocatalyst of carbon nitride quantum dots (CNQDs) in situ-doped TiO2 inverse opal TiO2 IO for efficient degradation of toluene. The catalyst was fabricated using a sol-gel method with colloidal photonic crystals as the template. The as-prepared catalyst exhibited excellent photocatalytic performance for degradation of toluene. After 6 h of simulated sunlight irradiation, 93% of toluene can be converted into non-toxic products CO2 and H2O, while only 37% of toluene is degraded over commercial P25 in the same condition. This greatly enhanced photocatalytic activity results from two aspects: (i) the inverse opal structure enhances the light harvesting while providing adequate surface area for effective oxidation reactions; (ii) the incorporation of CNQDs in the framework of TiO2 increases visible light absorption and promotes the separation of photo-generated charges. Collectively, highly efficient photocatalytic degradation of toluene has been achieved. In addition, it can be expanded to efficient degradation of organic pollutants in liquid phase such as phenol and Rhodamine B. This study provides a green, energy saving solution for indoor toxic VOCs removal as well as for the treatment of organic wastewater.

scholarly journals Characterization of in-situ zirconia/mullite composites prepared by sol-gel technique

2021 ◽  
pp. 1-7
Author(s):  
Abdu. I. Abdallah ◽  
M. Sayed ◽  
M. Awaad ◽  
Adam H. E. Yousif ◽  
S.M. Naga
Keyword(s):  
Sol Gel ◽  
Gel Technique

Studies on Adsorption Performance of Reactive Dye Remazol Navy RGB (RN-RGB) via Epoxide Functional Magnetic ?-Al2O3 Nanocomposite Particles

2017 ◽  
Vol 9 (4) ◽  
pp. 421-429
Author(s):  
S. S. Bristy ◽  
H. Ahmad
Keyword(s):  
Sol Gel ◽  
Reactive Dye ◽  
Al2o3 Nanoparticles ◽  
Silica Layer ◽  
Seeded Polymerization ◽  
Nanocomposite Particles ◽  
Adsorption Performance ◽  
Magnetite Fe3o4 ◽  
Co Precipitation

The nanocomposite particles named as ?-Al2O3/Fe3O4/SiO2/poly(glycidyl methacrylate) or ?-Al2O3/Fe3O4/SiO2/PGMA were prepared by multi-step process. At first, ?- Al2O3 nanoparticles were prepared by sol-gel method. Magnetite, Fe3O4, nanoparticles were then precipitated by in situ co-precipitation in presence of ?-Al2O3 particles, followed by incorporation of mesoporous silica layer using Stöber process. Finally, the surface of the ?-Al2O3/Fe3O4/SiO2 nanocomposite particles was modified by seeded polymerization of GMA using free radical polymerization. The surface modification, morphology and size distribution of the prepared nanocomposite particles were confirmed by FTIR, scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). The adsorption capacity of ?-Al2O3/Fe3O4/SiO2/PGMA nanocomposite particles was evaluated using remazol navy RGB (RN-RGB) as a model dye.

Synthesis and Intermolecularly Mediated Assembly of Organic Pigment in Hybrid Coating Films

1998 ◽  
Vol 519 ◽  
Author(s):  
Y. Yan ◽  
Z. Duan ◽  
D.-G. Chen ◽  
S. Ray Chaudhuri
Keyword(s):  
Sol Gel ◽  
Hybrid Coating ◽  
Hypsochromic Shift ◽  
Hybrid Films ◽  
Coating Films ◽  
Organic Pigment ◽  
Inorganic Hybrid ◽  
Matrix Interactions ◽  
Sol Gel Process

AbstractThe insoluble, strongly hydrogen bonded organic pigment of 3,6-bis-(4-chlorphenyl)-l,4- diketopyrrolo [3,4-c] pyrrole was transiently blocked by adding carbamate groups, and consequently incorporated into organic-inorganic hybrid matrices by a sol-gel process. The homo- (pigment-pigment) and hetero-intermolecular (pigment-matrix) interactions were found to control both the assembly and dispersion of pigment molecules in the hybrid coating films. A weaker interaction between matrices and pigment molecules results in aggregation of the carbamate pigment in the methyl-silicate films. A stronger interaction forms a homogenous dispersion and coloration of the phenyl-silicate films. The as-prepared methyl- and phenylsilicate films doped with the organic pigment were distinguished by a morphology change and a blue (hypsochromic) shift in absorption from 550 to 460 nm. Thermal treatment can remove the carbamate groups and in-situ form the organic pigment in the hybrid films.

Reinforcing efficiency and compatibilizing effect of sol–gel derived in situ silica for natural rubber/chloroprene rubber blends

RSC Advances ◽  
2014 ◽  
Vol 4 (102) ◽  
pp. 58816-58825 ◽  
Author(s):  
Bharat P. Kapgate ◽  
Chayan Das
Keyword(s):  
Natural Rubber ◽  
Sol Gel ◽  
Rubber Blends ◽  
In Situ Silica ◽  
Chloroprene Rubber ◽  
Compatibilizing Effect

The strong CR/in situ silica interaction causes filler accumulation at the interphase and enhances the compatibility and reinforcement in the NR/CR blend.

A NEW ORGANIC/INORGANIC HYBRID WITH HIGH ELECTRORHEOLOGICAL ACTIVITY

2002 ◽  
Vol 16 (17n18) ◽  
pp. 2454-2460 ◽  
Author(s):  
X. P. ZHAO ◽  
X. DUAN
Keyword(s):  
Activation Energy ◽  
Shear Stress ◽  
Necessary Conditions ◽  
Sol Gel ◽  
Root Temperature ◽  
Sedimentation Stability ◽  
Inorganic Hybrid ◽  
Active Particles ◽  
Static Shear

In-situ sol-gel method to prepare colloidal hybrids of surfactant modified polysucchride and titanium oxide has been presented, and experiments indicated these highly ER active particles exhibited a remarkable ER effect. The static shear stress can be up to 37 k Pa (shear rate 5 S -1) under DC field of 4 kV/mm at root temperature, well above that of simple blends of starch and TiO 2. In the meanwhile, temperature dependence and sedimentation stability were also greatly improved. Based on recent experimental facts, we find that dielectric properties and surface (interface) activity are two necessary conditions fulfilling the requirement of high ER activity. Adequate grinding of particles with oil can effectively enhance the shear stress, which may be owed to the decline of the activation energy needed for restructuring. It has provided us a new horizon for preparation of excellent ER materials and further studies should be continued to make.

Bioencapsulation in Sol-Gel Glasses

1998 ◽  
Vol 519 ◽  
Author(s):  
L. Bergogne ◽  
S. Fennouh ◽  
J. Livage ◽  
C. Roux
Keyword(s):  
Sol Gel ◽  
Porous Silica ◽  
Silica Matrix ◽  
Whole Cells ◽  
The Past ◽  
Wide Range ◽  
Activity Of Enzymes ◽  
Gel Glasses ◽  
Micro Organisms

AbstractBioencapsulation in sol-gel materials has been widely studied during the past decade. Trapped species appear to retain their bioactivity in the porous silica matrix. Small analytes can diffuse through the pores allowing bioreactions to be performed in-situ, inside the sol-gel glass. A wide range of biomolecules and micro-organisms have been encapsulated. The catalytic activity of enzymes is used for the realization of biosensors or bioreactors. Antibody-antigen recognition has been shown to be feasible within sol-gel matrices. Trapped antibodies bind specifically the corresponding haptens and can be used for the detection of traces of chemicals. Even whole cells are now encapsulated without any alteration of their cellular organization. They can be used for the production of chemicals or as antigens for immunoassays.

Sign in / Sign up

Export Citation Format

Share Document