Development and Testing of a Surface Flux and Planetary Boundary Layer Model for Application in Mesoscale Models

1995 ◽  
Vol 34 (1) ◽  
pp. 16-32 ◽  
Author(s):  
Jonathan E. Pleim ◽  
Aijun Xiu
Keyword(s):  
Boundary Layer ◽  
Soil Moisture ◽  
Planetary Boundary Layer ◽  
Land Surface ◽  
Field Experiments ◽  
Weather Prediction ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Global Climate Models ◽  
Pbl Model

Abstract Although the development of soil, vegetation, and atmosphere interaction models has been driven primarily by the need for accurate simulations of long-term energy and moisture budgets in global climate models, the importance of these processes at smaller scales for short-term numerical weather prediction and air quality studies is becoming more appreciated. Planetary boundary layer (PBL) development is highly dependent on the partitioning of the available net radiation into sensible and latent heat fluxes. Therefore, adequate treatmentof surface properties such as soil moisture and vegetation characteristics is essential for accurate simulation of PBL development, convective and low-level cloud processes, and the temperature and humidity of boundary layer air. In this paper, the development ofa simple coupled surface and PBL model, which is planned for incorporation into the Pennsylvania State University-National Center for Atmospheric Research Mesoscale Model (MM4/5), is described. The soil-vegetation model is based on a simple force-restore algorithm with explicit soil moisture and evapotranspiration. The PBL model is a hybrid of nonlocal closure for convective conditions and eddy diffusion for all other conditions. A one-dimensional version of the model has been applied to several case studies from field experiments in both dry desert-like conditions (Wangara) and moist vegetated conditions(First International Satellite Land Surface Climatology Project Field Experiment) to demonstrate the model's ability to realistically simulate surface fluxes as well as PBL development. This new surface-PBL model is currently being incorporated into the MM4-MM5 system.

scholarly journals Trends in Land–Atmosphere Interactions from CMIP5 Simulations

2013 ◽  
Vol 14 (3) ◽  
pp. 829-849 ◽  
Author(s):  
Paul A. Dirmeyer ◽  
Yan Jin ◽  
Bohar Singh ◽  
Xiaoqin Yan
Keyword(s):  
Boundary Layer ◽  
Soil Moisture ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Lower Troposphere ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Future Climate Change ◽  
Boreal Winter ◽  
The Future

Abstract Data from 15 models of phase 5 of the Coupled Model Intercomparison Project (CMIP5) for preindustrial, historical, and future climate change experiments are examined for consensus changes in land surface variables, fluxes, and metrics relevant to land–atmosphere interactions. Consensus changes in soil moisture and latent heat fluxes for past-to-present and present-to-future periods are consistent with CMIP3 simulations, showing a general drying trend over land (less soil moisture, less evaporation) over most of the globe, with the notable exception of high northern latitudes during winter. Sensible heat flux and net radiation declined from preindustrial times to current conditions according to the multimodel consensus, mainly due to increasing aerosols, but that trend reverses abruptly in the future projection. No broad trends are found in soil moisture memory except for reductions during boreal winter associated with high-latitude warming and diminution of frozen soils. Land–atmosphere coupling is projected to increase in the future across most of the globe, meaning a greater control by soil moisture variations on surface fluxes and the lower troposphere. There is also a strong consensus for a deepening atmospheric boundary layer and diminished gradients across the entrainment zone at the top of the boundary layer, indicating that the land surface feedback on the atmosphere should become stronger both in absolute terms and relative to the influence of the conditions of the free atmosphere. Coupled with the trend toward greater hydrologic extremes such as severe droughts, the land surface seems likely to play a greater role in amplifying both extremes and trends in climate on subseasonal and longer time scales.

scholarly journals Convective Planetary Boundary Layer Interactions with the Land Surface at Diurnal Time Scales: Diagnostics and Feedbacks

2007 ◽  
Vol 8 (5) ◽  
pp. 1082-1097 ◽  
Author(s):  
Joseph A. Santanello ◽  
Mark A. Friedl ◽  
Michael B. Ek
Keyword(s):  
Boundary Layer ◽  
Soil Moisture ◽  
Planetary Boundary Layer ◽  
Mixed Layer ◽  
Land Surface ◽  
Atmospheric Stability ◽  
Surface Fluxes ◽  
Surface Model ◽  
Wide Range ◽  
Convective Planetary Boundary Layer

Abstract The convective planetary boundary layer (PBL) integrates surface fluxes and conditions over regional and diurnal scales. As a result, the structure and evolution of the PBL contains information directly related to land surface states. To examine the nature and magnitude of land–atmosphere coupling and the interactions and feedbacks controlling PBL development, the authors used a large sample of radiosonde observations collected at the southern Atmospheric Research Measurement Program–Great Plains Cloud and Radiation Testbed (ARM-CART) site in association with simulations of mixed-layer growth from a single-column PBL/land surface model. The model accurately predicts PBL evolution and realistically simulates thermodynamics associated with two key controls on PBL growth: atmospheric stability and soil moisture. The information content of these variables and their influence on PBL height and screen-level temperature can be characterized using statistical methods to describe PBL–land surface coupling over a wide range of conditions. Results also show that the first-order effects of land–atmosphere coupling are manifested in the control of soil moisture and stability on atmospheric demand for evapotranspiration and on the surface energy balance. Two principal land–atmosphere feedback regimes observed during soil moisture drydown periods are identified that complicate direct relationships between PBL and land surface properties, and, as a result, limit the accuracy of uncoupled land surface and traditional PBL growth models. In particular, treatments for entrainment and the role of the residual mixed layer are critical to quantifying diurnal land–atmosphere interactions.

scholarly journals Influence of Land Cover and Soil Moisture on the Horizontal Distribution of Sensible and Latent Heat Fluxes in Southeast Kansas during IHOP_2002 and CASES-97

2007 ◽  
Vol 8 (1) ◽  
pp. 68-87 ◽  
Author(s):  
Margaret A. LeMone ◽  
Fei Chen ◽  
Joseph G. Alfieri ◽  
Mukul Tewari ◽  
Bart Geerts ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Latent Heat ◽  
Land Surface ◽  
Field Experiments ◽  
Time Of Day ◽  
Horizontal Distribution ◽  
Heat Fluxes ◽  
Surface Model ◽  
Green Vegetation ◽  
The Impact

Abstract Analyses of daytime fair-weather aircraft and surface-flux tower data from the May–June 2002 International H2O Project (IHOP_2002) and the April–May 1997 Cooperative Atmosphere Surface Exchange Study (CASES-97) are used to document the role of vegetation, soil moisture, and terrain in determining the horizontal variability of latent heat LE and sensible heat H along a 46-km flight track in southeast Kansas. Combining the two field experiments clearly reveals the strong influence of vegetation cover, with H maxima over sparse/dormant vegetation, and H minima over green vegetation; and, to a lesser extent, LE maxima over green vegetation, and LE minima over sparse/dormant vegetation. If the small number of cases is producing the correct trend, other effects of vegetation and the impact of soil moisture emerge through examining the slope ΔxyLE/ΔxyH for the best-fit straight line for plots of time-averaged LE as a function of time-averaged H over the area. Based on the surface energy balance, H + LE = Rnet − Gsfc, where Rnet is the net radiation and Gsfc is the flux into the soil; Rnet − Gsfc ∼ constant over the area implies an approximately −1 slope. Right after rainfall, H and LE vary too little horizontally to define a slope. After sufficient drying to produce enough horizontal variation to define a slope, a steep (∼−2) slope emerges. The slope becomes shallower and better defined with time as H and LE horizontal variability increases. Similarly, the slope becomes more negative with moister soils. In addition, the slope can change with time of day due to phase differences in H and LE. These trends are based on land surface model (LSM) runs and observations collected under nearly clear skies; the vegetation is unstressed for the days examined. LSM runs suggest terrain may also play a role, but observational support is weak.

Irrigation in JULES Land-Only Simulations over South and East Asia

2021 ◽  
Author(s):  
Markus Todt ◽  
Pier Luigi Vidale ◽  
Patrick C. McGuire ◽  
Omar V. Müller
Keyword(s):  
Soil Moisture ◽  
East Asia ◽  
Land Surface ◽  
River Flow ◽  
Heat Fluxes ◽  
Global Climate Models ◽  
Irrigated Agriculture ◽  
Irrigation Season ◽  
Irrigation Scheme ◽  
The Impact

<p>Capturing soil moisture-atmosphere feedbacks in a weather or climate model requires realistic simulation of various land surface processes. However, irrigation and other water management methods are still missing in most global climate models today, despite irrigated agriculture being the dominant land use in parts of Asia. In this study, we test the irrigation scheme available in the land model JULES (Joint UK Land Environment Simulator) by running land-only simulations over South and East Asia driven by WFDEI (WATCH Forcing Data ERA-Interim) forcing data. Irrigation in JULES is applied on a daily basis by replenishing soil moisture in the upper soil layers to field capacity, and we use a version of the irrigation scheme that extracts water for irrigation from groundwater and rivers, which physically limits the amount of irrigation that can be applied. We prescribe irrigation for C3 grasses in order to simulate the effects of agriculture, albeit retaining the simpler, widely used 5-PFT (plant functional type) configuration in JULES. Irrigation generally increases soil moisture and evapotranspiration, which results in increasing latent heat fluxes and decreasing sensible heat fluxes. Comparison with combined observational/machine-learning products for turbulent fluxes shows that while irrigation can reduce biases, other biases in JULES, unrelated to irrigation, are larger than improvements due to the inclusion of irrigation. Irrigation also affects water fluxes within the soil, e.g. runoff and drainage into the groundwater level, as well as soil moisture outside of the irrigation season. We find that the irrigation scheme, at least in the uncoupled land-atmosphere setting, can rapidly deplete groundwater to the point that river flow becomes the main source of irrigation (over the North China Plain and the Indus region) and can have the counterintuitive effect of decreasing annual average soil moisture (over the Ganges plain). Subsequently, we will explore the impact of irrigation on regional climate by conducting coupled land-atmosphere simulations.</p>

scholarly journals Climatology of Planetary Boundary Layer Height-Controlling Meteorological Parameters Over the Korean Peninsula

2020 ◽  
Vol 12 (16) ◽  
pp. 2571
Author(s):  
Shaik Allabakash ◽  
Sanghun Lim
Keyword(s):  
Boundary Layer ◽  
Soil Moisture ◽  
Planetary Boundary Layer ◽  
Korean Peninsula ◽  
Meteorological Parameters ◽  
Weather Forecasting ◽  
High Elevation ◽  
Transport Processes ◽  
Surface Fluxes ◽  
Pollution Transport

Planetary boundary layer (PBL) height plays a significant role in climate modeling, weather forecasting, air quality prediction, and pollution transport processes. This study examined the climatology of PBL-associated meteorological parameters over the Korean peninsula and surrounding sea using data from the ERA5 dataset produced by the European Centre for Medium-range Weather Forecasts (ECMWF). The data covered the period from 2008 to 2017. The bulk Richardson number methodology was used to determine the PBL height (PBLH). The PBLH obtained from the ERA5 data agreed well with that derived from sounding and Global Positioning System Radio Occultation datasets. Significant diurnal and seasonal variability in PBLH was observed. The PBLH increases from morning to late afternoon, decreases in the evening, and is lowest at night. It is high in the summer, lower in spring and autumn, and lowest in winter. The variability of the PBLH with respect to temperature, relative humidity, surface pressure, wind speed, lower tropospheric stability, soil moisture, and surface fluxes was also examined. The growth of the PBLH was high in the spring and in southern regions due to the low soil moisture content of the surface. A high PBLH pattern is evident in high-elevation regions. Increasing trends of the surface temperature and accordingly PBLH were observed from 2008 to 2017.

Development and Evaluation of a Coupled Photosynthesis-Based Gas Exchange Evapotranspiration Model (GEM) for Mesoscale Weather Forecasting Applications

2009 ◽  
Vol 48 (2) ◽  
pp. 349-368 ◽  
Author(s):  
Dev Niyogi ◽  
Kiran Alapaty ◽  
Sethu Raman ◽  
Fei Chen
Keyword(s):  
Boundary Layer ◽  
Soil Moisture ◽  
Gas Exchange ◽  
Surface Energy ◽  
Land Surface ◽  
Weather Forecasting ◽  
Stomatal Resistance ◽  
Surface Fluxes ◽  
Surface Model ◽  
Area Index

Abstract Current land surface schemes used for mesoscale weather forecast models use the Jarvis-type stomatal resistance formulations for representing the vegetation transpiration processes. The Jarvis scheme, however, despite its robustness, needs significant tuning of the hypothetical minimum-stomatal resistance term to simulate surface energy balances. In this study, the authors show that the Jarvis-type stomatal resistance/transpiration model can be efficiently replaced in a coupled land–atmosphere model with a photosynthesis-based scheme and still achieve dynamically consistent results. To demonstrate this transformative potential, the authors developed and coupled a photosynthesis, gas exchange–based surface evapotranspiration model (GEM) as a land surface scheme for mesoscale weather forecasting model applications. The GEM was dynamically coupled with a prognostic soil moisture–soil temperature model and an atmospheric boundary layer (ABL) model. This coupled system was then validated over different natural surfaces including temperate C4 vegetation (prairie grass and corn field) and C3 vegetation (soybean, fallow, and hardwood forest) under contrasting surface conditions (such as different soil moisture and leaf area index). Results indicated that the coupled model was able to realistically simulate the surface fluxes and the boundary layer characteristics over different landscapes. The surface energy fluxes, particularly for latent heat, are typically within 10%–20% of the observations without any tuning of the biophysical–vegetation characteristics, and the response to the changes in the surface characteristics is consistent with observations and theory. This result shows that photosynthesis-based transpiration/stomatal resistance models such as GEM, despite various complexities, can be applied for mesoscale weather forecasting applications. Future efforts for understanding the different scaling parameterizations and for correcting errors for low soil moisture and/or wilting vegetation conditions are necessary to improve model performance. Results from this study suggest that the GEM approach using the photosynthesis-based soil vegetation atmosphere transfer (SVAT) scheme is thus superior to the Jarvis-based approaches. Currently GEM is being implemented within the Noah land surface model for the community Weather Research and Forecasting (WRF) Advanced Research Version Modeling System (ARW) and the NCAR high-resolution land data assimilation system (HRLDAS), and validation is under way.

scholarly journals Sensitivity of Numerical Weather Forecasts to Initial Soil Moisture Variations in CFSv2

2016 ◽  
Vol 31 (6) ◽  
pp. 1973-1983 ◽  
Author(s):  
Paul A. Dirmeyer ◽  
Subhadeep Halder
Keyword(s):  
Boundary Layer ◽  
Soil Moisture ◽  
Time Scales ◽  
Land Surface ◽  
Forecast Model ◽  
Surface Fluxes ◽  
Near Surface ◽  
Weather Forecasts ◽  
Initial Soil Moisture ◽  
Initial Soil

Abstract When initial soil moisture is perturbed among ensemble members in the operational NWS global forecast model, surface latent and sensible fluxes are immediately affected much more strongly, systematically, and over a greater area than conventional land–atmosphere coupling metrics suggest. Flux perturbations are likewise transmitted to the atmospheric boundary layer more formidably than climatology-based metrics would indicate. Impacts are not limited to the traditional land–atmosphere coupling hot spots, but extend over nearly all ice-free land areas of the globe. Key to isolating this effect is that initial atmospheric states are identical among quantities correlated, pinpointing soil moisture and snow cover. A consequence of this high sensitivity is that significant positive impacts of realistic land surface initialization on the skill of deterministic near-surface temperature and humidity forecasts are also immediate and nearly universal during boreal spring and summer (the period investigated) and persist for at least 3 days over most land areas. Land surface initialization may be more broadly important for weather forecasts than previously realized, as the research focus historically has been on subseasonal-to-seasonal time scales. This study attempts to bridge the gap between climate studies with their associated coupling assessments and weather forecast time scales. Furthermore, errors in land surface initialization and shortcomings in the parameterization of atmospheric processes sensitive to surface fluxes may have greater consequences than previously recognized, the latter exemplified by the lack of impact on precipitation forecasts even though the simulation of boundary layer development is shown to be greatly improved with realistic soil moisture initialization.

scholarly journals Land surface spinup for episodic modeling

2014 ◽  
Vol 14 (15) ◽  
pp. 8165-8172 ◽  
Author(s):  
W. M. Angevine ◽  
E. Bazile ◽  
D. Legain ◽  
D. Pino
Keyword(s):  
Boundary Layer ◽  
Soil Moisture ◽  
Spatial Variability ◽  
Land Surface ◽  
Large Scale ◽  
Layer Structure ◽  
Numerical Models ◽  
Surface Fluxes ◽  
Boundary Layer Structure ◽  
Soil Variables

Abstract. Soil moisture strongly controls the surface fluxes in mesoscale numerical models, and thereby influences the boundary layer structure. Proper initialization of soil moisture is therefore critical for faithful simulations. In many applications, such as air quality or process studies, the model is run for short, discrete periods (a day to a month). This paper describes one method for soil initialization in these cases – self-spinup. In self-spinup, the model is initialized with a coarse-resolution operational model or reanalysis output, and run for a month, cycling its own soil variables. This allows the soil variables to develop appropriate spatial variability, and may improve the actual values. The month (or other period) can be run more than once if needed. The case shown is for the Boundary Layer Late Afternoon and Sunset Turbulence experiment, conducted in France in 2011. Self-spinup adds spatial variability, which improves the representation of soil moisture patterns around the experiment location, which is quite near the Pyrenees Mountains. The self-spinup also corrects a wet bias in the large-scale analysis. The overall result is a much-improved simulation of boundary layer structure, evaluated by comparison with soundings from the field site. Self-spinup is not recommended as a substitute for multi-year spinup with an offline land data assimilation system in circumstances where the data sets required for such spinup are available at the required resolution. Self-spinup may fail if the modeled precipitation is poorly simulated. It is an expedient for cases when resources are not available to allow a better method to be used.

scholarly journals Influences of a Winter Wheat Belt on the Evolution of the Boundary Layer

2005 ◽  
Vol 133 (8) ◽  
pp. 2178-2199 ◽  
Author(s):  
Renee A. McPherson ◽  
David J. Stensrud
Keyword(s):  
Boundary Layer ◽  
Land Use ◽  
Heat Flux ◽  
Soil Moisture ◽  
Winter Wheat ◽  
Latent Heat ◽  
Planetary Boundary Layer ◽  
Heat Fluxes ◽  
Scale Transformation ◽  
Sensible Heat

Abstract Evidence exists that a large-scale alteration of land use by humans can cause changes in the climatology of the region. The largest-scale transformation is the substitution of native landscape by agricultural cropland. This modeling study examines the impact of a direct substitution of one type of grassland for another—in this case, the replacement of tallgrass prairie with winter wheat. The primary difference between these grasses is their growing season: native prairie grasses of the U.S. Great Plains are warm-season grasses whereas winter wheat is a cool-season grass. Case study simulations were conducted for 27 March 2000 and 5 April 2000—days analyzed in previous observational studies. The simulations provided additional insight into the physical processes involved and changes that occurred throughout the depth of the planetary boundary layer. Results indicate the following: 1) with the proper adjustment of vegetation parameters, land-use type, fractional vegetation coverage, and soil moisture, the numerical simulations were able to capture the overall patterns measured near the surface across a growing wheat belt during benign springtime conditions in Oklahoma; 2) the impacts of the mesoscale belt of growing wheat included increased values of latent heat flux and decreased values of sensible heat flux over the wheat, increased values of atmospheric moisture near the surface above and downstream of the wheat, and a shallower planetary boundary layer (PBL) above and downstream of the wheat; 3) in the sheared environments that were examined, a shallower PBL that resulted from growing wheat (rather than natural vegetation) led to reduced entrainment of higher momentum air into the PBL and, thus, weaker winds within the PBL over and downwind from the growing wheat; 4) for the cases studied, gradients in sensible heat were insufficient to establish an unambiguous vegetation breeze or its corresponding mesoscale circulation; 5) the initialization of soil moisture within the root zone aided latent heat fluxes from growing vegetation; and 6) reasonable specification of land surface parameters was required for the correct simulation and prediction of surface heat fluxes and resulting boundary layer development.

Sign in / Sign up

Export Citation Format

Share Document