scholarly journals Long Barotropic Waves Generated by a Storm Crossing Topography

2007 ◽  
Vol 37 (12) ◽  
pp. 2809-2823 ◽  
Author(s):  
Ross Vennell

Abstract Storms crossing topography are shown to radiate long surface gravity waves. The waves are transients generated by changes in the depth-dependent amplitude of the atmospherically forced pressure wave beneath a storm. This generation mechanism for long waves, known as “meteorological tsunamis” or rissaga, does not appear to have been previously discussed. The transients have periods equal to the passage time of the storm, of order 30 min for small fast-moving storms. A 1D model is used to give the amplitudes of the transient waves generated by a small fast-moving storm crossing a topographic step on to a continental shelf and across a ridge. Large transients are generated by storms whose translation speed is subcritical in deep water and supercritical in shallow water, that is, faster than the shallow-water wave speed. Surprisingly, when the depth difference between the deep water and the continental shelf is large, a gentle transition from deep to shallow water over 10 storm widths only slightly reduces the amplitudes of the transients. The influence of a finite-width shelf on the enhancement of coastal storm surge is also discussed. A 2D numerical model illustrates the topographic transients generated by sub- and supercritical storms moving across a ridge. Topographic transients are suggested as a source of energy for seiches on shelves and within embayments. The energy may come from a storm crossing the adjacent continental slope and possibly from distant open-ocean storms crossing multiple ridges and seamounts.

1968 ◽  
Vol 21 (1) ◽  
pp. 91-91
Author(s):  
J. A. Ewing

I would like to comment on the change in underkeel clearance due to the motion of a ship in a seaway (A. F. Dickson, this Journal, 20, 363).Captain Dickson, in his conclusions, states that known techniques do not allow underkeel clearance to be calculated when ship motion is present. In fact there are a number of reliable ways of calculating the motions of a ship in waves (for example References (1) and (2), which treat the case of pitch and heave) which may help in this problem. These methods usually assume the ship is in deep water and is heading directly into the waves which are further assumed to be long-crested; but I believe it may also be possible to make reliable calculations for shallow-water effects and for waves which are, in reality, short-crested.


Author(s):  
Н.В. Єфремова ◽  
A.Є. Нильва ◽  
Н.Н. Котовська ◽  
М.В. Дрига

Un-running vessel at the shallow-water road anchorage is under exposure to waves that come at arbitrary angle from the high sea. 3D waves from deep-sea area become practically 2D when entering shallow water. While mean periods are kept, waves become shorter and their crests become higher and sharpener than for deep-water ones. As a result of diffraction of waves that come from the deep-water sea at the vessel, a transformation zone appears where waves become 3D again. Dimensions of the waves’ transformation zone, character and height of waves in this zone specify safety of auxiliary crafts, e.g. tugboats, bunker vessels, pilot and road crafts, oil garbage collectors and boom crafts. In the complex 3D waves the trajectory of auxiliary vessel’s movement has to be safe, vessel’s motions have to be moderate. Besides waves’ height is one of the parameters that are used for forecast of movement of spilled oil. Last years the biggest part examination of waves’ problems was devoted to estimation of waves’ impact onto stationary or floating shelf facilities. For validity estimation, waves’ characteristics defined due to different theories, are compared with experimental ones. But characteristics of the waves around shelf facilities are hardly able to be compared to same ones of waves around bodies with vessel-type shape.  At the experiments with vessels’ models, waves’ impact onto vessel was examined, but not the transformation of the waves themselves. So, comparing of waves area’s characteristics defined by both theoretical experimental ways is an actual problem.  Aim of the paper is verification of results of wave area investigation; wave area is located around a vessel that is exposed of arbitrary angle waves at shallow water conditions. Description of experimental investigations of transformed waves in the towing tank is done; transformation zone appears around vessel’s model while running waves diffract on it. Distribution of waves’ amplitudes at the designated points was fixed by the special designed and manufactured unit. Experimental data is compared with computation results both of linear and non-linear theories. It was assumed that experimental results and theoretical data satisfactory meet each other; also that non-linear computations define the maximal values of waves’ amplitudes at all cases.


Author(s):  
Yakov Afanasyev ◽  
Vasily Korabel

Rapidly moving storm crossing the shelf from shallow water to deep water can generate tsunami-like waves which can cause local flooding and damage to docks when the waves hit the coast. We report on laboratory experiments to examine the reflection of waves generated by a moving disturbance from the shelf. Experiments are performed in a two-layer fluid consisting of a layer of oil based ferrofluid lying on top of a layer of water with step bottom. The disturbance is generated by a permanent magnet moving above the surface of ferrofluid. Digital images of the flow are analyzed to obtain the evolution of the wave field. The experimental flows demonstrate two distinct regimes, namely subcritical when the speed of the magnet is less than the phase speed of the wave, and supercritical when the speed of the magnet is greater than the phase speed of the wave. In subcritical regime the disturbance is localized and its size is determined by the spatial extent of the forcing. In supercritical regime the waves form two beams extending at “Mach angle” with respect to the direction of motion. Oblique wave incident on the shelf can experience total reflection if the angle between the wave front and the shelf is greater than a critical value.


2011 ◽  
Vol 1 (6) ◽  
pp. 12
Author(s):  
J. G.H.R. Diephuis ◽  
J. G. Gerritze

This paper deals with the problem of determining the wave characteristics in shallow water from those in deep water. In general this can be done by means of a refraction calculation. If the sea bottom topography is too irregular the height of the waves can be determined by means of a small-scale refraction model. In both cases, however, some additional effects have to be taken into account, viz. the influence of the bottom friction and the influence of the wind.


1968 ◽  
Vol 1 (11) ◽  
pp. 11 ◽  
Author(s):  
Frederick E. Camfield ◽  
Robert L. Street

Experiments were conducted to determine the various effects on the shoaling, breaking and run-up of solitary waves resulting from the bottom configuration. An initial set of experiments investigated the effect of the initial bottom slope on the breaking and run-up of a wave on a second, higher slope. A second set of experiments considered the effect of a continental shelf configuration on the transmissibility of waves in the shoreward direction, and the decomposition of the waves due to the shallower water depth on the continental shelf. It was found that, in order to make predictions at or near the shoreline for waves generated in deep water, it is necessary to consider the total configuration of the bottom leading to the shoreline.


Author(s):  
Jon R. Ineson ◽  
John S. Peel

NOTE: This article was published in a former series of GEUS Bulletin. Please use the original series name when citing this article, for example: Ineson, J. R., & Peel, J. S. (1997). Cambrian shelf stratigraphy of North Greenland. Geology of Greenland Survey Bulletin, 173, 1-120. https://doi.org/10.34194/ggub.v173.5024 _______________ The Lower Palaeozoic Franklinian Basin is extensively exposed in northern Greenland and the Canadian Arctic Islands. For much of the early Palaeozoic, the basin consisted of a southern shelf, bordering the craton, and a northern deep-water trough; the boundary between the shelf and the trough shifted southwards with time. In North Greenland, the evolution of the shelf during the Cambrian is recorded by the Skagen Group, the Portfjeld and Buen Formations and the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups; the lithostratigraphy of these last three groups forms the main focus of this paper. The Skagen Group, a mixed carbonate-siliciclastic shelf succession of earliest Cambrian age was deposited prior to the development of a deep-water trough. The succeeding Portfjeld Formation represents an extensive shallow-water carbonate platform that covered much of the shelf; marked differentiation of the shelf and trough occurred at this time. Following exposure and karstification of this platform, the shelf was progressively transgressed and the siliciclastics of the Buen Formation were deposited. From the late Early Cambrian to the Early Ordovician, the shelf showed a terraced profile, with a flat-topped shallow-water carbonate platform in the south passing northwards via a carbonate slope apron into a deeper-water outer shelf region. The evolution of this platform and outer shelf system is recorded by the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups. The dolomites, limestones and subordinate siliciclastics of the Brønlund Fjord and Tavsens Iskappe Groups represent platform margin to deep outer shelf environments. These groups are recognised in three discrete outcrop belts - the southern, northern and eastern outcrop belts. In the southern outcrop belt, from Warming Land to south-east Peary Land, the Brønlund Fjord Group (Lower-Middle Cambrian) is subdivided into eight formations while the Tavsens Iskappe Group (Middle Cambrian - lowermost Ordovician) comprises six formations. In the northern outcrop belt, from northern Nyeboe Land to north-west Peary Land, the Brønlund Fjord Group consists of two formations both defined in the southern outcrop belt, whereas a single formation makes up the Tavsens Iskappe Group. In the eastern outcrop area, a highly faulted terrane in north-east Peary Land, a dolomite-sandstone succession is referred to two formations of the Brønlund Fjord Group. The Ryder Gletscher Group is a thick succession of shallow-water, platform interior carbonates and siliciclastics that extends throughout North Greenland and ranges in age from latest Early Cambrian to Middle Ordovician. The Cambrian portion of this group between Warming Land and south-west Peary Land is formally subdivided into four formations.The Lower Palaeozoic Franklinian Basin is extensively exposed in northern Greenland and the Canadian Arctic Islands. For much of the early Palaeozoic, the basin consisted of a southern shelf, bordering the craton, and a northern deep-water trough; the boundary between the shelf and the trough shifted southwards with time. In North Greenland, the evolution of the shelf during the Cambrian is recorded by the Skagen Group, the Portfjeld and Buen Formations and the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups; the lithostratigraphy of these last three groups forms the main focus of this paper. The Skagen Group, a mixed carbonate-siliciclastic shelf succession of earliest Cambrian age was deposited prior to the development of a deep-water trough. The succeeding Portfjeld Formation represents an extensive shallow-water carbonate platform that covered much of the shelf; marked differentiation of the shelf and trough occurred at this time. Following exposure and karstification of this platform, the shelf was progressively transgressed and the siliciclastics of the Buen Formation were deposited. From the late Early Cambrian to the Early Ordovician, the shelf showed a terraced profile, with a flat-topped shallow-water carbonate platform in the south passing northwards via a carbonate slope apron into a deeper-water outer shelf region. The evolution of this platform and outer shelf system is recorded by the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups. The dolomites, limestones and subordinate siliciclastics of the Brønlund Fjord and Tavsens Iskappe Groups represent platform margin to deep outer shelf environments. These groups are recognised in three discrete outcrop belts - the southern, northern and eastern outcrop belts. In the southern outcrop belt, from Warming Land to south-east Peary Land, the Brønlund Fjord Group (Lower-Middle Cambrian) is subdivided into eight formations while the Tavsens Iskappe Group (Middle Cambrian - lowermost Ordovician) comprises six formations. In the northern outcrop belt, from northern Nyeboe Land to north-west Peary Land, the Brønlund Fjord Group consists of two formations both defined in the southern outcrop belt, whereas a single formation makes up the Tavsens Iskappe Group. In the eastern outcrop area, a highly faulted terrane in north-east Peary Land, a dolomite-sandstone succession is referred to two formations of the Brønlund Fjord Group. The Ryder Gletscher Group is a thick succession of shallow-water, platform interior carbonates and siliciclastics that extends throughout North Greenland and ranges in age from latest Early Cambrian to Middle Ordovician. The Cambrian portion of this group between Warming Land and south-west Peary Land is formally subdivided into four formations.


Phytotaxa ◽  
2014 ◽  
Vol 190 (1) ◽  
pp. 250 ◽  
Author(s):  
Sonia Maria Barreto Pereira ◽  
JULIANA TORRES ◽  
Lisia Monica de Souza Gestinari

This study investigates the deep-water flora of the continental shelf in Sergipe State, Brazil located between 10º36’08’’ – 11º21’07’’S and 36º28’10’’ – 37º13’47’’W. The samples were collected by dragging at 18 sampling sites, between 10 to 30 m depth, from May 1999 to March 2000. A total of 91 taxa of marine benthic macroalgae were identified (56 Rhodophyta, 20 Heterokontophyta and 15 Chlorophyta). Forty-seven (47) of these are new occurrences for Sergipe flora. Rhodophyta dominated, accounting for 61% of the total species collected, with the order Ceramiales having the highest number of species present (39.55%), followed by Heterokontophyta (23%), mostly represented by Dictyotales (65%). Finally, 15 Chlorophyta taxa were found (16%), mainly composed of Bryopsidales (53%).


Author(s):  
Elton J. B. Ribeiro ◽  
Zhimin Tan ◽  
Yucheng Hou ◽  
Yanqiu Zhang ◽  
Andre Iwane

Currently the oil and gas industry is focusing on challenging deep water projects, particularly in Campos Basin located coast off Brazil. However, there are a lot of prolific reservoirs located in shallow water, which need to be developed and they are located in area very far from the coast, where there aren’t pipelines facilities to export oil production, in this case is necessary to use a floating production unit able to storage produced oil, such as a FPSO. So, the riser system configuration should be able to absorb FPSO’s dynamic response due to wave load and avoid damage at touch down zone, in this case is recommended to use compliant riser configuration, such as Lazy Wave, Tethered Wave or Lazy S. In addition to, the proposed FPSO for Tubarão Martelo development is a type VLCC (Very Large Crude Carrier) using external turret moored system, which cause large vertical motion at riser connection and it presents large static offset. Also are expected to install 26 risers and umbilicals hanging off on the turret, this large number of risers and umbilicals has driven the main concerns to clashing and clearance requirement since Lazy-S configuration was adopted. In this paper, some numerical model details and recommendations will be presented, which became a feasible challenging risers system in shallow water. For instance, to solve clashing problem it is strictly recommended for modeling MWA (Mid Water Arch) gutter and bend stiffener at top I-tube interface, this recommendation doesn’t matter in deep water, but for shallow water problem is very important. Also is important to use ballast modules in order to solve clashing problems.


1971 ◽  
Vol 50 (2) ◽  
pp. 321-334 ◽  
Author(s):  
James Witting

The average changes in the structure of thermal boundary layers at the surface of bodies of water produced by various types of surface waves are computed. the waves are two-dimensional plane progressive irrotational waves of unchanging shape. they include deep-water linear waves, deep-water capillary waves of arbitrary amplitude, stokes waves, and the deep-water gravity wave of maximum amplitude.The results indicate that capillary waves can decrease mean temperature gradients by factors of as much as 9·0, if the average heat flux at the air-water interface is independent of the presence of the waves. Irrotational gravity waves can decrease the mean temperature gradients by factors no more than 1·381.Of possible pedagogical interest is the simplicity of the heat conduction equation for two-dimensional steady irrotational flows in an inviscid incompressible fluid if the velocity potential and the stream function are taken to be the independent variables.


1949 ◽  
Vol 7c (7) ◽  
pp. 432-448 ◽  
Author(s):  
Viola M. Davidson

Underyearling salmon in a circular pond of moving water at 20–25 °C. swam during the day and rested on the bottom at night. Before feeding they translocated actively upstream in rapid shallow water and in all directions in slow deep water. During feeding they held position in slow water, but made short excursions to seize food. After feeding, most moved into rapid, shallow water, the largest into the most rapid water.Translocating salmon usually went upstream and swam faster in more rapid water so that the rate of translocation remained constant. The rate of translocation increased with the size of the fish, more than doubling from 3 to 4 cm. in length.While steady illumination caused the salmon to swim up in the water from the bottom, a sudden change in light intensity when they were swimming, as by an object moving against the sky, caused them to swim quickly from shallow to deep water.Eels translocated upstream regularly only in the more rapid water, the swimming rate increasing with current rate. Eels 7 cm. long translocated almost twice as rapidly as salmon 3.5 cm. long. Eels burrowed in the gravel in bright daylight, came out in the evening and translocated rapidly even at night when the salmon were resting.


Sign in / Sign up

Export Citation Format

Share Document