Evaluation of the CLM4 Lake Model at a Large and Shallow Freshwater Lake*

2013 ◽  
Vol 14 (2) ◽  
pp. 636-649 ◽  
Author(s):  
Bin Deng ◽  
Shoudong Liu ◽  
Wei Xiao ◽  
Wei Wang ◽  
Jiming Jin ◽  
...  
Keyword(s):  
Latent Heat ◽  
Lake Taihu ◽  
Large Fraction ◽  
Heat Fluxes ◽  
Freshwater Lake ◽  
Sediment Layer ◽  
Local Climate ◽  
Community Land Model ◽  
Numerical Predictions ◽  
Lake Model

Abstract Models of lake physical processes provide the lower flux boundary conditions for numerical predictions of weather and climate in lake basins. So far, there have been few studies on evaluating lake model performance at the diurnal time scale and against flux observations. The goal of this paper is to evaluate the National Center for Atmospheric Research Community Land Model version 4–Lake, Ice, Snow and Sediment Simulator using the eddy covariance and water temperature data obtained at a subtropical freshwater lake, Lake Taihu, in China. Both observations and model simulations reveal that convective overturning was commonplace at night and timed when water switched from being statically stable to being unstable. By reducing the water thermal diffusivity to 2% of the value calculated with the Henderson–Sellers parameterization, the model was able to reproduce the observed diurnal variations in water surface temperature and in sensible and latent heat fluxes. The small diffusivity suggests that the drag force of the sediment layer in this large (2500 km2) and shallow (2-m depth) lake may be strong, preventing unresolved vertical motions and suppressing wind-induced turbulence. Model results show that a large fraction of the incoming solar radiation energy was stored in the water during the daytime, and the stored energy was diffused upward at night to sustain sensible and latent heat fluxes to the atmosphere. Such a lake–atmosphere energy exchange modulated the local climate at the daily scale in this shallow lake, which is not seen in deep lakes where dominant lake–atmosphere interactions often occur at the seasonal scale.

scholarly journals Air-Sea Interactions over Eddies in the Brazil-Malvinas Confluence

2021 ◽  
Vol 13 (7) ◽  
pp. 1335
Author(s):  
Ronald Souza ◽  
Luciano Pezzi ◽  
Sebastiaan Swart ◽  
Fabrício Oliveira ◽  
Marcelo Santini
Keyword(s):  
Latent Heat ◽  
Large Scale ◽  
Surface Wind ◽  
Heat Fluxes ◽  
Lower Atmosphere ◽  
Meteorological Variables ◽  
Global Ocean ◽  
Study Region ◽  
Cold Core

The Brazil–Malvinas Confluence (BMC) is one of the most dynamical regions of the global ocean. Its variability is dominated by the mesoscale, mainly expressed by the presence of meanders and eddies, which are understood to be local regulators of air-sea interaction processes. The objective of this work is to study the local modulation of air-sea interaction variables by the presence of either a warm (ED1) and a cold core (ED2) eddy, present in the BMC, during September to November 2013. The translation and lifespans of both eddies were determined using satellite-derived sea level anomaly (SLA) data. Time series of satellite-derived surface wind data, as well as these and other meteorological variables, retrieved from ERA5 reanalysis at the eddies’ successive positions in time, allowed us to investigate the temporal modulation of the lower atmosphere by the eddies’ presence along their translation and lifespan. The reanalysis data indicate a mean increase of 78% in sensible and 55% in latent heat fluxes along the warm eddy trajectory in comparison to the surrounding ocean of the study region. Over the cold core eddy, on the other hand, we noticed a mean reduction of 49% and 25% in sensible and latent heat fluxes, respectively, compared to the adjacent ocean. Additionally, a field campaign observed both eddies and the lower atmosphere from ship-borne observations before, during and after crossing both eddies in the study region during October 2013. The presence of the eddies was imprinted on several surface meteorological variables depending on the sea surface temperature (SST) in the eddy cores. In situ oceanographic and meteorological data, together with high frequency micrometeorological data, were also used here to demonstrate that the local, rather than the large scale forcing of the eddies on the atmosphere above, is, as expected, the principal driver of air-sea interaction when transient atmospheric systems are stable (not actively varying) in the study region. We also make use of the in situ data to show the differences (biases) between bulk heat flux estimates (used on atmospheric reanalysis products) and eddy covariance measurements (taken as “sea truth”) of both sensible and latent heat fluxes. The findings demonstrate the importance of short-term changes (minutes to hours) in both the atmosphere and the ocean in contributing to these biases. We conclude by emphasizing the importance of the mesoscale oceanographic structures in the BMC on impacting local air-sea heat fluxes and the marine atmospheric boundary layer stability, especially under large scale, high-pressure atmospheric conditions.

scholarly journals Evaluation of Satellite-Derived Latent Heat Fluxes

1997 ◽  
Vol 10 (11) ◽  
pp. 2782-2795 ◽  
Author(s):  
Jörg Schulz ◽  
Jens Meywerk ◽  
Stefan Ewald ◽  
Peter Schlüssel
Keyword(s):  
Latent Heat ◽  
Heat Fluxes

scholarly journals Influence of Land Cover and Soil Moisture on the Horizontal Distribution of Sensible and Latent Heat Fluxes in Southeast Kansas during IHOP_2002 and CASES-97

2007 ◽  
Vol 8 (1) ◽  
pp. 68-87 ◽  
Author(s):  
Margaret A. LeMone ◽  
Fei Chen ◽  
Joseph G. Alfieri ◽  
Mukul Tewari ◽  
Bart Geerts ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Latent Heat ◽  
Land Surface ◽  
Field Experiments ◽  
Time Of Day ◽  
Horizontal Distribution ◽  
Heat Fluxes ◽  
Surface Model ◽  
Green Vegetation ◽  
The Impact

Abstract Analyses of daytime fair-weather aircraft and surface-flux tower data from the May–June 2002 International H2O Project (IHOP_2002) and the April–May 1997 Cooperative Atmosphere Surface Exchange Study (CASES-97) are used to document the role of vegetation, soil moisture, and terrain in determining the horizontal variability of latent heat LE and sensible heat H along a 46-km flight track in southeast Kansas. Combining the two field experiments clearly reveals the strong influence of vegetation cover, with H maxima over sparse/dormant vegetation, and H minima over green vegetation; and, to a lesser extent, LE maxima over green vegetation, and LE minima over sparse/dormant vegetation. If the small number of cases is producing the correct trend, other effects of vegetation and the impact of soil moisture emerge through examining the slope ΔxyLE/ΔxyH for the best-fit straight line for plots of time-averaged LE as a function of time-averaged H over the area. Based on the surface energy balance, H + LE = Rnet − Gsfc, where Rnet is the net radiation and Gsfc is the flux into the soil; Rnet − Gsfc ∼ constant over the area implies an approximately −1 slope. Right after rainfall, H and LE vary too little horizontally to define a slope. After sufficient drying to produce enough horizontal variation to define a slope, a steep (∼−2) slope emerges. The slope becomes shallower and better defined with time as H and LE horizontal variability increases. Similarly, the slope becomes more negative with moister soils. In addition, the slope can change with time of day due to phase differences in H and LE. These trends are based on land surface model (LSM) runs and observations collected under nearly clear skies; the vegetation is unstressed for the days examined. LSM runs suggest terrain may also play a role, but observational support is weak.

scholarly journals Averaging-Related Biases in Monthly Latent Heat Fluxes

2012 ◽  
Vol 29 (7) ◽  
pp. 974-986 ◽  
Author(s):  
Paul J. Hughes ◽  
Mark A. Bourassa ◽  
Jeremy J. Rolph ◽  
Shawn R. Smith
Keyword(s):  
Latent Heat ◽  
Classical Method ◽  
Surface Flux ◽  
Heat Fluxes ◽  
Western Boundary ◽  
State University ◽  
Boundary Current ◽  
Surface Energy Fluxes ◽  
Temporal Averaging ◽  
The Impact

Abstract Seasonal-to-multidecadal applications that require ocean surface energy fluxes often require accuracies of surface turbulent fluxes to be 5 W m−2 or better. While there is little doubt that uncertainties in the flux algorithms and input data can cause considerable errors, the impact of temporal averaging has been more controversial. The biases resulting from using monthly averaged winds, temperatures, and humidities in the bulk aerodynamic formula (i.e., the so-called classical method) to estimate the monthly mean latent heat fluxes are shown to be substantial and spatially varying in a manner that is consistent with most prior work. These averaging-related biases are linked to nonnegligible submonthly covariances between the wind, temperature, and humidity. To provide additional insight into the averaging-related bias, the methodology behind the third-generation Florida State University monthly mean surface flux product (FSU3) is detailed to highlight additional sources of errors in gridded datasets. The FSU3 latent heat fluxes suffer from this averaging-related bias, which can be as large as 90 W m−2 in western boundary current regions during winter and can exceed 40 W m−2 in synoptically active portions of the tropics. The regional impacts of these biases on the mixed layer temperature tendency are shown to demonstrate that the error resulting from applying the classical method is physically substantial.

The Effect of Soil on the Summertime Surface Energy Budget of a Humid Subarctic Tundra in Northern Quebec, Canada

2021 ◽  
Vol 22 (10) ◽  
pp. 2547-2564
Author(s):  
Georg Lackner ◽  
Daniel F. Nadeau ◽  
Florent Domine ◽  
Annie-Claude Parent ◽  
Gonzalo Leonardini ◽  
...  
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Arctic Region ◽  
Heat Fluxes ◽  
Surface Energy Budget ◽  
Turbulent Heat ◽  
Turbulent Heat Fluxes

AbstractRising temperatures in the southern Arctic region are leading to shrub expansion and permafrost degradation. The objective of this study is to analyze the surface energy budget (SEB) of a subarctic shrub tundra site that is subject to these changes, on the east coast of Hudson Bay in eastern Canada. We focus on the turbulent heat fluxes, as they have been poorly quantified in this region. This study is based on data collected by a flux tower using the eddy covariance approach and focused on snow-free periods. Furthermore, we compare our results with those from six Fluxnet sites in the Arctic region and analyze the performance of two land surface models, SVS and ISBA, in simulating soil moisture and turbulent heat fluxes. We found that 23% of the net radiation was converted into latent heat flux at our site, 35% was used for sensible heat flux, and about 15% for ground heat flux. These results were surprising considering our site was by far the wettest site among those studied, and most of the net radiation at the other Arctic sites was consumed by the latent heat flux. We attribute this behavior to the high hydraulic conductivity of the soil (littoral and intertidal sediments), typical of what is found in the coastal regions of the eastern Canadian Arctic. Land surface models overestimated the surface water content of those soils but were able to accurately simulate the turbulent heat flux, particularly the sensible heat flux and, to a lesser extent, the latent heat flux.

scholarly journals Challenges in Modeling Turbulent Heat Fluxes to Snowpacks in Forest Clearings

2018 ◽  
Vol 19 (10) ◽  
pp. 1599-1616 ◽  
Author(s):  
Jonathan P. Conway ◽  
John W. Pomeroy ◽  
Warren D. Helgason ◽  
Nicholas J. Kinar
Keyword(s):  
Heat Exchange ◽  
Surface Temperature ◽  
Latent Heat ◽  
Turbulent Fluxes ◽  
Heat Fluxes ◽  
Turbulent Heat ◽  
Snow Surface ◽  
Turbulent Heat Exchange ◽  
Uncertainty Estimates ◽  
Model Tuning

Abstract Forest clearings are common features of evergreen forests and produce snowpack accumulation and melt differing from that in adjacent forests and open terrain. This study has investigated the challenges in specifying the turbulent fluxes of sensible and latent heat to snowpacks in forest clearings. The snowpack in two forest clearings in the Canadian Rockies was simulated using a one-dimensional (1D) snowpack model. A trade-off was found between optimizing against measured snow surface temperature or snowmelt when choosing how to specify the turbulent fluxes. Schemes using the Monin–Obukhov similarity theory tended to produce negatively biased surface temperature, while schemes that enhanced turbulent fluxes, to reduce the surface temperature bias, resulted in too much melt. Uncertainty estimates from Monte Carlo experiments showed that no realistic parameter set could successfully remove biases in both surface temperature and melt. A simple scheme that excludes atmospheric stability correction was required to successfully simulate surface temperature under low wind speed conditions. Nonturbulent advective fluxes and/or nonlocal sources of turbulence are thought to account for the maintenance of heat exchange in low-wind conditions. The simulation of snowmelt was improved by allowing enhanced latent heat fluxes during low-wind conditions. Caution is warranted when snowpack models are optimized on surface temperature, as model tuning may compensate for deficiencies in conceptual and numerical models of radiative, conductive, and turbulent heat exchange at the snow surface and within the snowpack. Such model tuning could have large impacts on the melt rate and timing of the snow-free transition in simulations of forest clearings within hydrological and meteorological models.

Full 3D Conjugate Heat Transfer Simulation and Heat Transfer Coefficient Prediction for the Effusion-Cooled Wall of a Gas Turbine Combustor

2008 ◽  
Author(s):  
Andreas Jeromin ◽  
Christian Eichler ◽  
Berthold Noll ◽  
Manfred Aigner
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Gas Turbine ◽  
Conjugate Heat Transfer ◽  
Solid Wall ◽  
Heat Fluxes ◽  
Computational Domain ◽  
Transfer Coefficients ◽  
Wall Functions ◽  
Numerical Predictions

Numerical predictions of conjugate heat transfer on an effusion cooled flat plate were performed and compared to detailed experimental data. The commercial package CFX® is used as flow solver. The effusion holes in the referenced experiment had an inclination angle of 17 degrees and were distributed in a staggered array of 7 rows. The geometry and boundary conditions in the experiments were derived from modern gas turbine combustors. The computational domain contains a plenum chamber for coolant supply, a solid wall and the main flow duct. Conjugate heat transfer conditions are applied in order to couple the heat fluxes between the fluid region and the solid wall. The fluid domain contains 2.4 million nodes, the solid domain 300,000 nodes. Turbulence modeling is provided by the SST turbulence model which allows the resolution of the laminar sublayer without wall functions. The numerical predictions of velocity and temperature distributions at certain locations show significant differences to the experimental data in velocity and temperature profiles. It is assumed that this behavior is due to inappropriate modeling of turbulence especially in the effusion hole. Nonetheless, the numerically predicted heat transfer coefficients are in good agreement with the experimental data at low blowing ratios.

Sign in / Sign up

Export Citation Format

Share Document