Mechanical properties of the surface membrane of lattice spacer-fabric flexible inflatable composites

2021 ◽  
pp. 004051752110466
Author(s):  
Tong Yang ◽  
Min Luo ◽  
Zhuanyong Zou ◽  
Pibo Ma
Keyword(s):  
Mechanical Properties ◽  
Surface Membrane ◽  
Composite Membranes ◽  
Vital Role ◽  
Specific Strength ◽  
Spacer Fabric ◽  
Bearing Loads ◽  
Spacer Fabrics ◽  
Woven Structure ◽  
Performance Research

The surface membrane plays a vital role in bearing loads of flexible inflatable composites. In this work, the mechanical properties of the upper and lower surfaces of inflatable composites and spacer fabrics were studied. It focused on the changes in mechanical properties of surfaces of spacer fabrics with different structures after coating and damage characteristics. The results show that the PVC resin improves the mechanical properties of the surface, which penetrates into the structure to make the yarns bond to each other and adhere to the resin on the surface. And compared with knitted structures, composite membranes with a woven structure have the characteristics of specific strength. This provides data accumulation for performance research of flexible inflatable composites, finite element calculation analysis, and the experimental reference for broadening the application in military pontoons and marching tents.

Study on Structure and Mechanical Properties of Spacer Fabric

2011 ◽  
Vol 332-334 ◽  
pp. 1093-1096
Author(s):  
Xiao Liu ◽  
Zhao Qun Du ◽  
Wei Dong Yu
Keyword(s):  
Mechanical Properties ◽  
Tensile Properties ◽  
Sandwich Structures ◽  
Experimental Results ◽  
Spacer Fabric ◽  
Spacer Fabrics ◽  
The Relationship

3D spacer fabrics have obviously better performance compared with ordinary fabrics due to their special "sandwich" structures. The paper is to investigate the structures and their compression performances, tensile properties and bending performances on 20 kinds of 3D spacer fabrics. The experimental results showed the relationship between mechanical properties and structures of spacer fabric, and obtained the correlation between each mechanics index and fabric, stiffness. It is useful in expressing the special behaviors of spacer fabrics.

scholarly journals Effect of Silicone Inlaid Materials on Reinforcing Compressive Strength of Weft-Knitted Spacer Fabric for Cushioning Applications

Polymers ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3645
Author(s):  
Annie Yu ◽  
Sachiko Sukigara ◽  
Miwa Shirakihara
Keyword(s):  
Mechanical Properties ◽  
Compressive Strain ◽  
Compression Properties ◽  
Elastic Tubes ◽  
Compression Behaviour ◽  
Silicone Foam ◽  
Three Samples ◽  
Spacer Fabric ◽  
Different Types ◽  
Spacer Fabrics

Spacer fabrics are commonly used as cushioning materials. They can be reinforced by using a knitting method to inlay materials into the connective layer which reinforces the structure of the fabric. The compression properties of three samples that were fabricated by inlaying three different types of silicone-based elastic tubes and one sample without inlaid material have been investigated. The mechanical properties of the elastic tubes were evaluated and their relationship to the compression properties of the inlaid spacer fabrics was analysed. The compression behaviour of the spacer fabrics at an initial compressive strain of 10% is not affected by the presence of the inlaid tubes. The Young’s modulus of the inlaid tubes shows a correlation with fabric compression. Amongst the inlaid fabric samples, the spacer fabric inlaid with highly elastic silicone foam tubes can absorb more compression energy, while that inlaid with silicone tubes of higher tensile strength has higher compressive stiffness.

Flat-knitted innovative three-dimensional spacer fabrics: a competitive solution for lightweight composite applications

2011 ◽  
Vol 82 (3) ◽  
pp. 288-298 ◽  
Author(s):  
MD Abounaim ◽  
Chokri Cherif
Keyword(s):  
Mechanical Properties ◽  
Sensor Networks ◽  
Health Monitoring ◽  
Complex Shape ◽  
Three Dimensional ◽  
Surface Layers ◽  
Fabric Structure ◽  
Spacer Fabric ◽  
Processing Step ◽  
Spacer Fabrics

Flat-knitted spacer fabrics offer a strong potential for complex shape preforms, which could be used to manufacture composites with reduced waste and shorter production times. A reinforced spacer fabric made of individual surface layers and joined with connecting layers shows improved mechanical properties for lightweight applications, such as textile-based sandwich preforms. We report the development of flat-knitted multi-layered innovative three-dimensional (3D) spacer fabrics from hybrid yarns consisting of glass and polypropylene filaments. Moreover, for structural health monitoring of composites, sensor networks could be created into a 3D spacer fabric structure in a single processing step through innovative integration of functional yarns.

scholarly journals Biological Applications of Severely Plastically Deformed Nano-Grained Medical Devices: A Review

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 748
Author(s):  
Katayoon Kalantari ◽  
Bahram Saleh ◽  
Thomas J. Webster
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Bacterial Colonization ◽  
Antibiotic Use ◽  
Bone Cell ◽  
Corrosion Properties ◽  
Biomedical Implant ◽  
Specific Strength ◽  
Biological Functionality ◽  
Bone Cell Proliferation

Metallic materials are widely used for fabricating medical implants due to their high specific strength, biocompatibility, good corrosion properties, and fatigue resistance. Recently, titanium (Ti) and its alloys, as well as stainless steel (SS), have attracted attention from researchers because of their biocompatibility properties within the human body; however, improvements in mechanical properties while keeping other beneficial properties unchanged are still required. Severe plastic deformation (SPD) is a unique process for fabricating an ultra-fine-grained (UFG) metal with micrometer- to nanometer-level grain structures. SPD methods can substantially refine grain size and represent a promising strategy for improving biological functionality and mechanical properties. This present review paper provides an overview of different SPD techniques developed to create nano-/ultra-fine-grain-structured Ti and stainless steel for improved biomedical implant applications. Furthermore, studies will be covered that have used SPD techniques to improve bone cell proliferation and function while decreasing bacterial colonization when cultured on such nano-grained metals (without resorting to antibiotic use).

Morphology of Rigid-Rod Molecular Composites: An Overview

1988 ◽  
Vol 134 ◽  
Author(s):  
Stephen J. Krause
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
Morphological Characterization ◽  
High Ratio ◽  
Structure Property ◽  
Chain Polymer ◽  
Specific Strength ◽  
Composite Systems ◽  
Molecular Composites ◽  
Rigid Rod

ABSTRACTRigid-rod molecular composites are a new class of high performance structural polymers which have high specific strength and modulus and also high thermal and environmental resistance. A rigid-rod, extended chain polymer component is used to reinforce a matrix of a ductile polymer with the intent of achieving a “composite” on the molecular level. After synthesis, the key to producing a molecular composite is to control morphology to disperse the reinforcing rod molecules as finely as possible in the matrix polymer. Individual rod molecules or bundles of molecular rods must have dimensions which result in a high ratio of length to width (aspect ratio) for efficient reinforcement. To achieve this, the reinforcing rod component must not phase separate at any stage of processing. Morphological characterization techniques, which can measure the orientation and dispersion (or, conversely, the degree of phase separation) of rod molecules provide the tools for correlating theoretically predicted and experimentally observed mechanical properties. Various morphological techniques which have been applied to molecular composite systems will be reviewed, including wide angle x-ray scattering and scanning and transmission electron microscopy. Structure-property correlations for molecular composite systems will be discussed with regard to models for mechanical properties. Application of new morphological techniques will also be discussed.

Effect of Nano Clay on Mechanical Behavior of Bamboo Fiber Reinforced Polyester Composites

2018 ◽  
Vol 877 ◽  
pp. 294-298 ◽  
Author(s):  
Kundan Patel ◽  
Jay Patel ◽  
Piyush Gohil ◽  
Vijaykumar Chaudhary
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Clay Content ◽  
Weight Fraction ◽  
Industrial Applications ◽  
Vital Role ◽  
Bamboo Fiber ◽  
Nano Clay ◽  
Different Types ◽  
Polyester Composite

Composite materials play a vital role in many industrial applications. Researchers are working on fabrication of new composite materials worldwide to enhance the applicability of these materials. The present study aimed to investigate the effect of Nano clay loading as filler on the mechanical properties of the bamboo fiber yarn reinforced polyester composite. Five different types of composite specimen were prepared with Nano clay loadings of 0 to 4 % weight fraction using hand lay-up technique. It was observed that the composite sheet with 1 wt % nano clay content exhibited the optimized tensile and flexural strength. However the mechanical properties tend to decrease with addition of nano clay content from 2 to 4 wt %. In spite of that the values of mechanical properties with 2 and 3 wt % nano clay content is higher than 0 wt % nano clay content.

scholarly journals Experimental Investigation into the Effect of Surface Roughness and Mechanical Properties of 3D-Printed Titanium Ti-64 ELI after Heat Treatment

2021 ◽  
Author(s):  
Lebogang Lebea ◽  
Harry M Ngwangwa ◽  
Dawood Desai ◽  
Fuluphelo Nemavhola
Keyword(s):  
Mechanical Properties ◽  
Surface Roughness ◽  
Dental Implants ◽  
Dental Implant ◽  
Complex Geometry ◽  
Poor Performance ◽  
Vital Role ◽  
Ultimate Tensile Stress ◽  
3D Printed ◽  
Effect Of Surface

The initial stability after implantology is paramount to the survival of the dental implant and the surface roughness of the implant plays a vital role in this regard. The characterisation of surface topography is a complicated branch of metrology, with a huge range of parameters available. Each parameter contributes significantly towards the survival and mechanical properties of 3D-printed specimens. The purpose of this paper is to experimentally investigate the effect of surface roughness of 3D-printed dental implants and 3D-printed dogbone tensile samples under areal height (Ra) parameters, amplitude parameters (average of ordinates), skewness (Rsk) parameters and mechanical properties. During the experiment, roughness values were analysed and the results showed that the skewness parameter demonstrated a minimum value of 0.596%. The 3D-printed dental implant recorded Ra with a 3.4 mm diameter at 43.23% and the 3D-printed dental implant with a 4.3 mm diameter at 26.18%. Samples with a complex geometry exhibited a higher roughness surface, which was the greatest difficulty of additive manufacturing when evaluating surface finish. The results show that when the ultimate tensile stress (UTS) decreases from 968.35 MPa to 955.25 MPa, Ra increases by 1.4% and when UTS increases to 961.18 MPa, Ra increases by 0.6%. When the cycle decreases from 262142 to 137433, Ra shows that less than a 90.74% increase in cycle is obtained. For 3D-printed dental implants, the higher the surface roughness, the lower the mechanical properties, ultimately leading to decreased implant life and poor performance.

scholarly journals Knitting Technologies And Tensile Properties Of A Novel Curved Flat-Knitted Three-Dimensional Spacer Fabrics

2015 ◽  
Vol 15 (3) ◽  
pp. 191-197 ◽  
Author(s):  
Xiaoying Li ◽  
Gaoming Jiang ◽  
Xiaolin Nie ◽  
Pibo Ma ◽  
Zhe Gao
Keyword(s):  
Tensile Stress ◽  
Tensile Properties ◽  
Dimensional Stability ◽  
Three Dimensional ◽  
Tensile Tests ◽  
Weft Direction ◽  
Aramid Fibres ◽  
Spacer Fabric ◽  
Fabric Deformation ◽  
Spacer Fabrics

AbstractThis paper introduces a knitting technique for making innovative curved three-dimensional (3D) spacer fabrics by the computer flat-knitting machine. During manufacturing, a number of reinforcement yarns made of aramid fibres are inserted into 3D spacer fabrics along the weft direction to enhance the fabric tensile properties. Curved, flat-knitted 3D spacer fabrics with different angles (in the warp direction) were also developed. Tensile tests were carried out in the weft and warp directions for the two spacer fabrics (with and without reinforcement yarns), and their stress–strain curves were compared. The results showed that the reinforcement yarns can reduce the fabric deformation and improve tensile stress and dimensional stability of 3D spacer fabrics. This research can help the further study of 3D spacer fabric when applied to composites.

Sign in / Sign up

Export Citation Format

Share Document