Effect of nanosilver on the thermal stability and thermal decomposition kinetics of poly(acetoacetoxyethyl methacrylate–styrene)

2018 ◽  
Vol 50 (8) ◽  
pp. 710-719
Author(s):  
Shengtao Gao ◽  
Honglong Xing
Keyword(s):  
Thermal Stability ◽  
Degradation Kinetics ◽  
Nitrate Solution ◽  
Silver Nitrate Solution ◽  
Thermal Degradation Kinetics ◽  
Face Centered Cubic ◽  
Transmission Electron ◽  
Face Centered ◽  
Kinetics Of ◽  
Better Than

Nanosilver/poly(acetoacetoxyethyl methacrylate–styrene) (nano-Ag/P(AAEM-St)) composites were synthesized via emulsifier-free emulsion with silver nitrate solution, AAEM, and St monomer copolymerization by ultrasonic. The morphology and structure of the composites were characterized by ultraviolet and visible spectroscopy, X-ray diffractometer, and transmission electron microscopy, respectively. The results show that Ag nanoparticles with face-centered cubic structure are homogeneously dispersed in the P(AAEM-St) matrix. The thermal stability and the thermal degradation kinetics of P(AAEM-St) were investigated using the thermogravimetric analysis and Kissinger and Flynn–Wall–Ozawa method, respectively. The results prove that the thermal stability of the pure P(AAEM-St) is better than that of the nano-Ag/P(AAEM-St) composites.

scholarly journals Thermal Degradation Kinetics and Modeling Study of Ultra High Molecular Weight Polyethylene (UHMWP)/Graphene Nanocomposite

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1597
Author(s):  
Iman Jafari ◽  
Mohamadreza Shakiba ◽  
Fatemeh Khosravi ◽  
Seeram Ramakrishna ◽  
Ehsan Abasi ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Molecular Weight ◽  
Thermal Degradation ◽  
High Molecular Weight ◽  
Degradation Kinetics ◽  
Graphene Nanosheets ◽  
Thermal Degradation Kinetics ◽  
Graphene Nanocomposites ◽  
Kinetics Of ◽  
Ultra High Molecular Weight

The incorporation of nanofillers such as graphene into polymers has shown significant improvements in mechanical characteristics, thermal stability, and conductivity of resulting polymeric nanocomposites. To this aim, the influence of incorporation of graphene nanosheets into ultra-high molecular weight polyethylene (UHMWPE) on the thermal behavior and degradation kinetics of UHMWPE/graphene nanocomposites was investigated. Scanning electron microscopy (SEM) analysis revealed that graphene nanosheets were uniformly spread throughout the UHMWPE’s molecular chains. X-Ray Diffraction (XRD) data posited that the morphology of dispersed graphene sheets in UHMWPE was exfoliated. Non-isothermal differential scanning calorimetry (DSC) studies identified a more pronounced increase in melting temperatures and latent heat of fusions in nanocomposites compared to UHMWPE at lower concentrations of graphene. Thermogravimetric analysis (TGA) and derivative thermogravimetric (DTG) revealed that UHMWPE’s thermal stability has been improved via incorporating graphene nanosheets. Further, degradation kinetics of neat polymer and nanocomposites have been modeled using equations such as Friedman, Ozawa–Flynn–Wall (OFW), Kissinger, and Augis and Bennett’s. The "Model-Fitting Method” showed that the auto-catalytic nth-order mechanism provided a highly consistent and appropriate fit to describe the degradation mechanism of UHMWPE and its graphene nanocomposites. In addition, the calculated activation energy (Ea) of thermal degradation was enhanced by an increase in graphene concentration up to 2.1 wt.%, followed by a decrease in higher graphene content.

Thermo-oxidative and thermal degradation kinetics of silica/polymethyl methacrylate composites with electrostatic interaction phase interfaces

2019 ◽  
Vol 39 (2) ◽  
pp. 105-116 ◽  
Author(s):  
Hongyan Li ◽  
Yongqiang Fu ◽  
Hongli Liu ◽  
Cong Sun ◽  
Ruyi Li ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Thermal Degradation ◽  
Polymethyl Methacrylate ◽  
Electrostatic Interaction ◽  
Degradation Kinetics ◽  
Thermal Degradation Kinetics ◽  
Degradation Kinetic ◽  
Further Development ◽  
Kinetics Of ◽  
Insulation Performance

AbstractThe thermo-oxidative and thermal degradation kinetic parameters of polymethyl methacrylate-methacryloxyethyltrimethyl ammonium chloride/silica aerogel composites (PMMA-MTC/SA) were investigated in this paper and were compared with the thermal stability and thermal conductivity of different types of composites. As a composite with electrostatic interaction, the thermo-oxidative and thermal degradation activation energies (E) of PMMA-MTC/SA were 173.97 and 188.05 kJ/mol, respectively. The results indicated that the electrostatic interaction could indeed enhance the thermal stability of silica/polymethyl methacrylate composites on the premise of good mechanical properties and heat insulation performance. It is of great significance for the further development of silica-based thermal insulation composites.

Non-isothermal crystallization and thermal degradation kinetics of MXene/linear low-density polyethylene nanocomposites

e-Polymers ◽  
2017 ◽  
Vol 17 (5) ◽  
pp. 373-381 ◽  
Author(s):  
Xinxin Cao ◽  
Mengqi Wu ◽  
Aiguo Zhou ◽  
You Wang ◽  
Xiaofang He ◽  
...  
Keyword(s):  
Activation Energy ◽  
Thermal Stability ◽  
Thermal Degradation ◽  
Isothermal Crystallization ◽  
Degradation Kinetics ◽  
Thermal Degradation Kinetics ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Linear Low Density Polyethylene ◽  
Kinetics Of

AbstractA novel two-dimensional material MXene was used to synthesize nanocomposites with linear low-density polyethylene (LLDPE). The influence of MXene on crystallization and thermal degradation kinetics of LLDPE was investigated. Non-isothermal crystallization kinetics was investigated by using differential scanning calorimetry (DSC). The experimental data was analyzed by Jeziorny theory and the Mo method. It is found that MXene acted as a nucleating agent during the non-isothermal crystallization process, and 2 wt% MXene incorporated in the nanocomposites could accelerate the crystallization rate. Findings from activation energy calculation for non-isothermal crystallization came to the same conclusion. Thermal gravity (TG) analysis of MXene/LLDPE nanocomposites was conducted at different heating rates, and the TG thermograms suggested the nanocomposites showed an improvement in thermal stability. Apparent activation energy (Ea) of thermal degradation was calculated by the Kissinger method, and Ea values of nanocomposites were higher than that of pure LLDPE. The existence of MXene seems to lead to better thermal stability in composites.

Thermal Stability and Failure Mechanisms of Au/Tiw(N)/Si and Au/TiW(N)/Si02/Si Systems

1996 ◽  
Vol 427 ◽  
Author(s):  
C. R. Chen ◽  
L. J. Chen
Keyword(s):  
Thermal Stability ◽  
Failure Mechanisms ◽  
Cubic Phase ◽  
Face Centered Cubic ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Single Face ◽  
Face Centered ◽  
The Stability ◽  
Ar Gas

AbstractThermal stability and failure mechanisms of Au/TiW(N)/Si and Au/TiW(N)/SiO2/Si systems have been studied by both conventional and high-resolution transmission electron microscopy, X- ray diffraction and Auger electron spectroscopy. For films deposited in Ar gas containing 20% N2, a single face-centered-cubic phase was the only crystalline phase detected to form. The samples were found to remain stable after annealing at 700 °C for 30 min. The stability temperature for Au/TiW(N)(Ar:N2=80:20)/SiO2/Si samples was found to be higher than those of Au/TiW(N) (Ar:N2=90:10)/SiO2/Si and Au/TiW/SiO2/Si samples.

Thermal properties and thermal degradation kinetics of phenolic and wood flour-reinforced phenolic foams

2016 ◽  
Vol 51 (1) ◽  
pp. 125-138 ◽  
Author(s):  
JC Domínguez ◽  
B del Saz-Orozco ◽  
M Oliet ◽  
MV Alonso ◽  
F Rodriguez
Keyword(s):  
Thermal Stability ◽  
Thermal Degradation ◽  
Degradation Kinetics ◽  
Wood Flour ◽  
Activation Energies ◽  
Thermal Degradation Kinetics ◽  
Kinetic Methods ◽  
Model Free ◽  
Phenolic Foam ◽  
Kinetics Of

In the present work, the thermal stability, changes in chemical structure during thermal degradation, and the kinetics of thermal degradation of a phenolic foam were studied. An 8.5 wt% of Pinus radiata wood flour reinforcement was added to the phenolic foam. A commercial phenolic resol was used as the matrix for the foam. The wood flour-reinforced foam showed a structure similar to the phenolic foam according to the Fourier transform infrared spectroscopy results. The wood flour increased the thermal stability of the phenolic foam in the first stage of thermal degradation ( T 5%), decreased it in the second step ( T 25%), and negligibly influenced the final stage. The activation energies of the degradation processes of the studied materials were obtained by the Kissinger-Akahira-Sunose and Flynn-Wall-Ozawa model-free kinetic methods and a 2-Gaussian distributed activation energy model. The values of the activation energies obtained by the model-free kinetic methods for the first degradation stage of the phenolic foams were in a range between 110 and 170 kJ mol−1, whereas for the wood flour it was 162 kJ mol−1 for almost all of the conversion range of its main degradation stage. The applied models showed good fits for all the materials, and the activation energies calculated were in agreement with the values found in the literature.

Thermal degradation kinetics of oxo-degradable PP/PLA blends

2018 ◽  
Vol 39 (1) ◽  
pp. 58-67 ◽  
Author(s):  
Dev K. Mandal ◽  
Haripada Bhunia ◽  
Pramod K. Bajpai
Keyword(s):  
Activation Energy ◽  
Thermal Stability ◽  
Thermogravimetric Analysis ◽  
Thermal Degradation ◽  
Kinetic Parameters ◽  
Degradation Kinetics ◽  
Nitrogen Atmosphere ◽  
Thermal Degradation Kinetics ◽  
Heating Rates ◽  
Kinetics Of

AbstractIn this article, the influence of polylactide and pro-oxidant on the thermal stability, degradation kinetics, and lifetime of polypropylene has been investigated using thermogravimetric analysis under nitrogen atmosphere at four different heating rates (i.e. 5, 10, 15, and 20°C/min). The kinetic parameters of degradation were studied over a temperature range of 30–550°C. The derivative thermogravimetric curves have indicated single stage and two stage degradation processes. The activation energy was evaluated by using the Kissinger, Kim-Park, and Flynn-Wall methods under the nitrogen atmosphere. The activation energy value of polypropylene was much higher than that of polylactide. Addition of polylactide and pro-oxidant in polypropylene decreased the activation energy. The lifetime of polypropylene has also decreased with the addition of polylactide and pro-oxidant.

Influence of Organomodified Ni-Al Layered Double Hydroxide (LDH) Content on the Thermal Properties and Degradation Kinetics of Polystyrene (PS)/Ni-Al LDH Nanocomposites Prepared via Solvent Blending Method

2013 ◽  
Vol 747 ◽  
pp. 23-26 ◽  
Author(s):  
Manish Kumar Sinha ◽  
G. Pugazhenthi
Keyword(s):  
Thermal Stability ◽  
Thermal Properties ◽  
Degradation Kinetics ◽  
Decomposition Temperature ◽  
Thermal Degradation Kinetics ◽  
Blending Method ◽  
Friedman Method ◽  
Double Hydroxide ◽  
Kinetics Of ◽  
Thermal Stability Of

A series of polystyrene (PS) nanocomposites with various concentration of organomodified Ni-Al LDH (3, 7 wt%) were synthesized by solvent blending method and the effect of Ni-Al LDH content on the thermal properties and degradation kinetics of PS/ Ni-Al LDH nanocomposites was examined. Thermogravimetric analysis (TGA) was employed to evaluate the thermal properties of the prepared PS nanocomposites with various content of Ni-Al LDH. The obtained TGA results reveal that the PS/Ni-Al LDH nanocomposites exhibits enhanced thermal stability when compared with pure PS and the thermal stability of the nanocomposites increase with an increase in the LDH content from 3 to 7 wt%. When 15% weight loss is selected as a point of comparison, the thermal decomposition temperature of the PS/Ni-Al LDH nanocomposite containing 7 wt% of LDH is about 28°C higher than that of pure PS. The thermal degradation kinetics of the nanocomposite materials are investigated using two kinetic models such as Flynn-Wall-Ozawa method and Friedman method. The improvement of thermal stability of the nanocomposites with increasing LDH content is also validated by increasing the activation energies.

Sign in / Sign up

Export Citation Format

Share Document