Non-isothermal crystallization and thermal degradation kinetics of MXene/linear low-density polyethylene nanocomposites

e-Polymers ◽  
2017 ◽  
Vol 17 (5) ◽  
pp. 373-381 ◽  
Author(s):  
Xinxin Cao ◽  
Mengqi Wu ◽  
Aiguo Zhou ◽  
You Wang ◽  
Xiaofang He ◽  
...  
Keyword(s):  
Activation Energy ◽  
Thermal Stability ◽  
Thermal Degradation ◽  
Isothermal Crystallization ◽  
Degradation Kinetics ◽  
Thermal Degradation Kinetics ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Linear Low Density Polyethylene ◽  
Kinetics Of

AbstractA novel two-dimensional material MXene was used to synthesize nanocomposites with linear low-density polyethylene (LLDPE). The influence of MXene on crystallization and thermal degradation kinetics of LLDPE was investigated. Non-isothermal crystallization kinetics was investigated by using differential scanning calorimetry (DSC). The experimental data was analyzed by Jeziorny theory and the Mo method. It is found that MXene acted as a nucleating agent during the non-isothermal crystallization process, and 2 wt% MXene incorporated in the nanocomposites could accelerate the crystallization rate. Findings from activation energy calculation for non-isothermal crystallization came to the same conclusion. Thermal gravity (TG) analysis of MXene/LLDPE nanocomposites was conducted at different heating rates, and the TG thermograms suggested the nanocomposites showed an improvement in thermal stability. Apparent activation energy (Ea) of thermal degradation was calculated by the Kissinger method, and Ea values of nanocomposites were higher than that of pure LLDPE. The existence of MXene seems to lead to better thermal stability in composites.

Thermal degradation kinetics of oxo-degradable PP/PLA blends

2018 ◽  
Vol 39 (1) ◽  
pp. 58-67 ◽  
Author(s):  
Dev K. Mandal ◽  
Haripada Bhunia ◽  
Pramod K. Bajpai
Keyword(s):  
Activation Energy ◽  
Thermal Stability ◽  
Thermogravimetric Analysis ◽  
Thermal Degradation ◽  
Kinetic Parameters ◽  
Degradation Kinetics ◽  
Nitrogen Atmosphere ◽  
Thermal Degradation Kinetics ◽  
Heating Rates ◽  
Kinetics Of

AbstractIn this article, the influence of polylactide and pro-oxidant on the thermal stability, degradation kinetics, and lifetime of polypropylene has been investigated using thermogravimetric analysis under nitrogen atmosphere at four different heating rates (i.e. 5, 10, 15, and 20°C/min). The kinetic parameters of degradation were studied over a temperature range of 30–550°C. The derivative thermogravimetric curves have indicated single stage and two stage degradation processes. The activation energy was evaluated by using the Kissinger, Kim-Park, and Flynn-Wall methods under the nitrogen atmosphere. The activation energy value of polypropylene was much higher than that of polylactide. Addition of polylactide and pro-oxidant in polypropylene decreased the activation energy. The lifetime of polypropylene has also decreased with the addition of polylactide and pro-oxidant.

scholarly journals Thermal Degradation Kinetics and Modeling Study of Ultra High Molecular Weight Polyethylene (UHMWP)/Graphene Nanocomposite

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1597
Author(s):  
Iman Jafari ◽  
Mohamadreza Shakiba ◽  
Fatemeh Khosravi ◽  
Seeram Ramakrishna ◽  
Ehsan Abasi ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Molecular Weight ◽  
Thermal Degradation ◽  
High Molecular Weight ◽  
Degradation Kinetics ◽  
Graphene Nanosheets ◽  
Thermal Degradation Kinetics ◽  
Graphene Nanocomposites ◽  
Kinetics Of ◽  
Ultra High Molecular Weight

The incorporation of nanofillers such as graphene into polymers has shown significant improvements in mechanical characteristics, thermal stability, and conductivity of resulting polymeric nanocomposites. To this aim, the influence of incorporation of graphene nanosheets into ultra-high molecular weight polyethylene (UHMWPE) on the thermal behavior and degradation kinetics of UHMWPE/graphene nanocomposites was investigated. Scanning electron microscopy (SEM) analysis revealed that graphene nanosheets were uniformly spread throughout the UHMWPE’s molecular chains. X-Ray Diffraction (XRD) data posited that the morphology of dispersed graphene sheets in UHMWPE was exfoliated. Non-isothermal differential scanning calorimetry (DSC) studies identified a more pronounced increase in melting temperatures and latent heat of fusions in nanocomposites compared to UHMWPE at lower concentrations of graphene. Thermogravimetric analysis (TGA) and derivative thermogravimetric (DTG) revealed that UHMWPE’s thermal stability has been improved via incorporating graphene nanosheets. Further, degradation kinetics of neat polymer and nanocomposites have been modeled using equations such as Friedman, Ozawa–Flynn–Wall (OFW), Kissinger, and Augis and Bennett’s. The "Model-Fitting Method” showed that the auto-catalytic nth-order mechanism provided a highly consistent and appropriate fit to describe the degradation mechanism of UHMWPE and its graphene nanocomposites. In addition, the calculated activation energy (Ea) of thermal degradation was enhanced by an increase in graphene concentration up to 2.1 wt.%, followed by a decrease in higher graphene content.

Thermo-oxidative and thermal degradation kinetics of silica/polymethyl methacrylate composites with electrostatic interaction phase interfaces

2019 ◽  
Vol 39 (2) ◽  
pp. 105-116 ◽  
Author(s):  
Hongyan Li ◽  
Yongqiang Fu ◽  
Hongli Liu ◽  
Cong Sun ◽  
Ruyi Li ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Thermal Degradation ◽  
Polymethyl Methacrylate ◽  
Electrostatic Interaction ◽  
Degradation Kinetics ◽  
Thermal Degradation Kinetics ◽  
Degradation Kinetic ◽  
Further Development ◽  
Kinetics Of ◽  
Insulation Performance

AbstractThe thermo-oxidative and thermal degradation kinetic parameters of polymethyl methacrylate-methacryloxyethyltrimethyl ammonium chloride/silica aerogel composites (PMMA-MTC/SA) were investigated in this paper and were compared with the thermal stability and thermal conductivity of different types of composites. As a composite with electrostatic interaction, the thermo-oxidative and thermal degradation activation energies (E) of PMMA-MTC/SA were 173.97 and 188.05 kJ/mol, respectively. The results indicated that the electrostatic interaction could indeed enhance the thermal stability of silica/polymethyl methacrylate composites on the premise of good mechanical properties and heat insulation performance. It is of great significance for the further development of silica-based thermal insulation composites.

Thermal properties and thermal degradation kinetics of phenolic and wood flour-reinforced phenolic foams

2016 ◽  
Vol 51 (1) ◽  
pp. 125-138 ◽  
Author(s):  
JC Domínguez ◽  
B del Saz-Orozco ◽  
M Oliet ◽  
MV Alonso ◽  
F Rodriguez
Keyword(s):  
Thermal Stability ◽  
Thermal Degradation ◽  
Degradation Kinetics ◽  
Wood Flour ◽  
Activation Energies ◽  
Thermal Degradation Kinetics ◽  
Kinetic Methods ◽  
Model Free ◽  
Phenolic Foam ◽  
Kinetics Of

In the present work, the thermal stability, changes in chemical structure during thermal degradation, and the kinetics of thermal degradation of a phenolic foam were studied. An 8.5 wt% of Pinus radiata wood flour reinforcement was added to the phenolic foam. A commercial phenolic resol was used as the matrix for the foam. The wood flour-reinforced foam showed a structure similar to the phenolic foam according to the Fourier transform infrared spectroscopy results. The wood flour increased the thermal stability of the phenolic foam in the first stage of thermal degradation ( T 5%), decreased it in the second step ( T 25%), and negligibly influenced the final stage. The activation energies of the degradation processes of the studied materials were obtained by the Kissinger-Akahira-Sunose and Flynn-Wall-Ozawa model-free kinetic methods and a 2-Gaussian distributed activation energy model. The values of the activation energies obtained by the model-free kinetic methods for the first degradation stage of the phenolic foams were in a range between 110 and 170 kJ mol−1, whereas for the wood flour it was 162 kJ mol−1 for almost all of the conversion range of its main degradation stage. The applied models showed good fits for all the materials, and the activation energies calculated were in agreement with the values found in the literature.

Effect of Pd Nanoparticle on the Thermal Degradation Kinetics of Nylon 6/Pd Nanocomposite Prepared by a Dry Process

2012 ◽  
Vol 486 ◽  
pp. 27-33 ◽  
Author(s):  
Jae Young Lee ◽  
Sung Wan Hong ◽  
Kyeong Sik Han ◽  
Taeck Hong Lee ◽  
Hong Ki Lee
Keyword(s):  
Activation Energy ◽  
Thermal Degradation ◽  
Degradation Kinetics ◽  
Pd Nanoparticles ◽  
Nylon 6 ◽  
Thermal Degradation Kinetics ◽  
Heating Rates ◽  
Dry Process ◽  
Effect Of Pd ◽  
Kinetics Of

Palladium (Pd) nanoparticles were incorporated into a nylon 6 film via a dry process which consisted of simultaneous vaporization, penetration and reduction processes of palladium (II) bis (acetylacetonate, Pd (acac)2) at 180°C for various exposure time. The even dispersion of the generated Pd nanoparticles were observed by transmission electron microscope (TEM) and the Pd loading weight of about 15~43 wt% was measured by thermogravimetric analysis (TGA). In order to study the catalytic effect of Pd nanoparticles on the thermal degradation kinetics of nylon 6, TGA data at various heating rates were introduced to Flynn & Wall equation. The thermal degradation activation energy for neat nylon 6 was ca. 162~178 kJ/mol over the thermal degradation fraction of 0.05~0.40 while that of the nylon 6/Pd (26.5 wt%) nanocomposite was ca. 110~169 kJ/mol over the same fraction range. It meant the Pd nanoparticles were acted as a catalyst on the depolymerization of amide group in nylon 6. It was also found that the activation energy decreased slightly with the increasing Pd loading weight.

scholarly journals Thermomechanical and Morphological Studies of CFRP Tested in Different Environmental Conditions

Materials ◽  
2018 ◽  
Vol 12 (1) ◽  
pp. 63 ◽  
Author(s):  
Claudia Barile ◽  
Caterina Casavola ◽  
Paramsamy Vimalathithan ◽  
Marco Pugliese ◽  
Vincenzo Maiorano
Keyword(s):  
Activation Energy ◽  
Thermal Degradation ◽  
Mass Loss ◽  
Environmental Conditions ◽  
Degradation Kinetics ◽  
Fiber Reinforced Polymers ◽  
Thermal Degradation Kinetics ◽  
Morphological Studies ◽  
Significant Difference ◽  
Kinetics Of

The present work describes the mechanical characterization combined with the thermal degradation kinetics of Carbon Fiber Reinforced Polymers (CFRP). The thermal degradation kinetics of CFRP have never been studied in the past. In that regard, the present work focuses on studying the thermal degradation kinetics of CFRP tested mechanically at different environmental conditions. Tensile tests were performed on the specimens with different lay-ups at room temperature, elevated temperature (71 °C), and cryogenic conditions (−54 °C), and the same specimens were used for thermal degradation kinetic studies. Mechanical tests show different responses respect to the different environmental conditions and different fibers orientation. On the other hand, the thermogravimetric results, mass loss, and derivative mass loss, show no significant difference in the degradation of CFRP tested at different temperatures. However, the thermal degradation kinetics shows more insight into the degradation pattern of the materials. The activation energy of degradation shows that the degradation of materials subjected to elevated conditions increases rapidly in the later stages of degradation, suggesting the formation of high char yield. The varying activation energy has been related to different degradation mechanisms. Lastly, the morphology of the materials was studied under SEM to understand the structural change in the material after tested in different weather conditions.

Thermal Behavior and Degradation Kinetics of Compatibilized Metallocene-Linear Low Density Polyethylene/Nanoclay Nanocomposites

2014 ◽  
Vol 53 (9) ◽  
pp. 890-902 ◽  
Author(s):  
Navid Kaptan ◽  
Seyed Hassan Jafari ◽  
Saeedeh Mazinani ◽  
Shahin Akhlaghi ◽  
Hakimeh Fazilat ◽  
...  
Keyword(s):  
Thermal Behavior ◽  
Degradation Kinetics ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Linear Low Density Polyethylene ◽  
Kinetics Of
Sign in / Sign up

Export Citation Format

Share Document