“Just-in-Place” labor: Driver organizing in the Uber workplace

2020 ◽  
pp. 0308518X2094926
Author(s):  
Katie J Wells ◽  
Kafui Attoh ◽  
Declan Cullen

This paper examines the socio-spatial dynamics of worker agency in the platform economy in the Washington, D.C. region. Drawing on the field of labor geography, we document the collective and inherently spatial conditions of laboring under and through new technologies for three years prior to, and six months after, a strike by Uber drivers in May 2019. In doing so, we explore what Uber’s platform means for the production, accumulation, and contestation of power. We argue that the big innovation of this platform is the creation of a “just-in-place” worker. Akin to those materials for assembly lines that arrived just-in-time for production, so too do drivers end up in just the right place for Uber’s services to be offered. We also argue that Uber’s attempts to keep its workers “just-in-place,” which generally isolate and disempower drivers, can actually enable new modes of organization. At a D.C. airport, drivers who were emplaced in a parking lot overcame one of the fundamental conditions of the Uber workplace: socio-spatial atomization. The airport became a space in which the “just-in-place” worker could, at least for a time, challenge such emplacement and exercise a form of collective worker agency by re-working Uber’s dynamic pricing system.

Author(s):  
Arkadiusz Urbanek

This article discusses securing the right to respect for one's own religion, identity, and culture. However, it confronts them with penitentiary practice in Polish organizational and legal conditions. There emerges an interesting space for analysing different tendencies to uniformize the conditions of punishment and protection of individualization. Not only are procedural issues involved, but, above all, the mentality and attitudes presented by penitentiary officers. The deliberations are focused on a kind of conflict between yielding under the demands of a different culture and the resistance of prison staff against respecting them. Presented conclusions are the results of field research among penitentiary officers in Poland, but they all start a discussion on the creation of penitentiary policy in this area, especially in countries with poor experience in working with Muslims.


This work is to perceive the open space in the halting reach using PLC and SCADA. The rule target is to recognize the unfilled space and demonstrating the driver to a particular opening. This paper tries to layout and execute an electronic stopping region organization structure. Robotized Parking Lot Management System is a totally utilitarian and painstakingly controlled parking structure organization system that is executed with the usage and compromise of different electronic equipment and littler scale figuring. The layout incorporates assorted stages, from the rule unit; process is passed on to different subunits to achieve the target of full motorization. A moving toward auto will pass on (through the driver) remotely with the essential unit associated with the Parking Office Gate. The essential unit will check the transmitted access information and will pass control after affirmation to the gateway framework drivers, this in this way drives the right entryway control (either exit or segment unit). The system currently screens the development of the driver some time later, and for entry, as the driver moves a destined eparation into the workplace ,the system turns back the entryway segment (for finish of entryway) and passes control to the space part and organization unit. The objective of this later unit is to manage the parking spaces available in the package by watching the development of the automobiles inside, allocating the spaces in a precise manner, watching consistence what's more, prompt the general control center (watched out for) of the space(s) open. It has a show interface for talking with the customers of the workplace. There is in like manner a control center that is watched out for by work power and screens the activities inside the parking structure. It is educated regarding any development, space(s) open and moreover the general system can be shut down or changed on from the control center. The basic goal of this errand is to achieve full motorization and it will find snappy use in tremendous workplaces with different access restrictions, government properties, and school grounds to sectionalize educator's auto stop and understudy's auto stop, etc.


Author(s):  
В.П. Хранилов ◽  
П.В. Мисевич ◽  
А.Э. Ермилов

В статье представлены модели описания сценариев функционирования автоматизированных систем (АС). Вводится и анализируется категория "жизненный цикл сценариев АС". Наиболее важными этапами жизненного цикла сценария являются следующие: этап формирования событийного набора для формирования сценария, этап выполнения последовательности сценарных событий и этап ситуационного анализа внешней и внутренней среды события. В статье предложена математическая модель функционирования АС, которая используется для поддержки этапа выполнения последовательности сценарных событий и основана на принципе информационной логистики: каждый параметр (набор данных) находится в нужном месте в АС, "точно в срок" и в нужном формате. Для поддержки ситуационного анализа предлагается модифицированная фреймовая модель. Ситуационный анализ используется для разработки алгоритмов событий и определения следующего события в сценарии. Модифицированная фреймовая модель основана на использовании нечетких логических процедур в фреймовой сети. The paper presents models for describing the operating scenarios of automated systems. The authors introduce and analyze the category “the life cycle of automated system scenarios”. The life cycle consists of a sequence of stages. The leading success factor of any scenario is the support of the scenario during all stages of its life cycle. The most important stages of the scenario life cycle are the following: the stage of forming the event set for generating the scenario, the stage of performing the sequence of scenario events and the stage of situational analysis of the external and internal environment of the event. In the article it is proposed to use a theoretical set model in order to select an element from a set of alternatives. The elements are events for designing a scenario. The model uses fuzzy logic and is based on the process of controlling an array of parameters if variants are available. The model is used to support the stage of forming a set of events for generating the scenario. The mathematical model of automated system operation which is used to support the stage of performing the sequence of scenario events is suggested in the article. The model is based on the principle of information logistics: each parameter (a set of data) is in the right place in the automated system, ‘just-in-time’ and in the required format. A modified frame model is proposed to support situational analysis. The situational analysis is used to operate the event algorithms and to determine the next event in the scenario. The modified frame model is based on the use of fuzzy logic procedures in a frame network.


2020 ◽  
Vol 9 (3) ◽  
pp. 131-144
Author(s):  
D.A. REDIN ◽  

The purpose of the article is to research the history of creation and formation of the Chancellery of Contract Affairs – the first supervisory and regulatory body in the field of public procurement in Russia. The early history of the Contracting Chancellery (1715–1717) can be traced in the context of the development of legislative and administrative regulation of public procurement during the reign of Peter the Great. The institution of public procurement itself, according to the author, is associated with the acquisition of distinct features of the modern state by Russia, which was manifested in the previous time. The immediate impetus for the development of the institution was the reform of the armed forces and the resulting mobilization efforts of the supreme power. The very content of the research predetermined the use of source-based and historical-legal methods. As a result of the study, the author states that the creation of a special body – the Chancellery of Contract Affairs, designed to take control of the situation under state contracts, turned out to be the right decision. The well-coordinated work of the Contracting Chancellery with the Senate, fiscal authorities and investigative bodies led to the creation of a number of important regulatory legal acts, almost ‘from scratch’ forming the legislative basis for the institution of public procurement functioning. The need for further work on the designated topic is noted.


Author(s):  
Petra Molnar

This chapter focuses on how technologies used in the management of migration—such as automated decision-making in immigration and refugee applications and artificial intelligence (AI) lie detectors—impinge on human rights with little international regulation, arguing that this lack of regulation is deliberate, as states single out the migrant population as a viable testing ground for new technologies. Making migrants more trackable and intelligible justifies the use of more technology and data collection under the guide of national security, or even under tropes of humanitarianism and development. Technology is not inherently democratic, and human rights impacts are particularly important to consider in humanitarian and forced migration contexts. An international human rights law framework is particularly useful for codifying and recognizing potential harms, because technology and its development are inherently global and transnational. Ultimately, more oversight and issue specific accountability mechanisms are needed to safeguard fundamental rights of migrants, such as freedom from discrimination, privacy rights, and procedural justice safeguards, such as the right to a fair decision maker and the rights of appeal.


Agronomy ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 952
Author(s):  
Lia Duarte ◽  
Ana Cláudia Teodoro ◽  
Joaquim J. Sousa ◽  
Luís Pádua

In a precision agriculture context, the amount of geospatial data available can be difficult to interpret in order to understand the crop variability within a given terrain parcel, raising the need for specific tools for data processing and analysis. This is the case for data acquired from Unmanned Aerial Vehicles (UAV), in which the high spatial resolution along with data from several spectral wavelengths makes data interpretation a complex process regarding vegetation monitoring. Vegetation Indices (VIs) are usually computed, helping in the vegetation monitoring process. However, a crop plot is generally composed of several non-crop elements, which can bias the data analysis and interpretation. By discarding non-crop data, it is possible to compute the vigour distribution for a specific crop within the area under analysis. This article presents QVigourMaps, a new open source application developed to generate useful outputs for precision agriculture purposes. The application was developed in the form of a QGIS plugin, allowing the creation of vigour maps, vegetation distribution maps and prescription maps based on the combination of different VIs and height information. Multi-temporal data from a vineyard plot and a maize field were used as case studies in order to demonstrate the potential and effectiveness of the QVigourMaps tool. The presented application can contribute to making the right management decisions by providing indicators of crop variability, and the outcomes can be used in the field to apply site-specific treatments according to the levels of vigour.


Laws ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 64
Author(s):  
Carlos Arroyo-Abad

Faced with protecting the right to privacy and, with it, the inviolability of homes, the development of new technologies and the possibility of developing work from home has opened the door to a series of new conflicts that require us to provide a specific legal framework by which such situations can be addressed. In the Spanish case, we speak of Law 10/2021 from 9 July on remote working. The objective of this study is to assess the scope as well as the problems that this law generates during its application, regarding controlling the provision of services. However, we not only identify the incidental factors, but also provide a necessary reinterpretation of the right to privacy from the perspective of the inviolability of homes, especially when its current articulation may operate to the detriment of employees’ rights, as contradictory as this may seem.


Informatics ◽  
2021 ◽  
Vol 8 (2) ◽  
pp. 30
Author(s):  
Mansoor Ahmed Soomro ◽  
Mohd Hizam-Hanafiah ◽  
Nor Liza Abdullah ◽  
Mohd Helmi Ali ◽  
Muhammad Shahar Jusoh

Industry 4.0 revolution, with its cutting-edge technologies, is an enabler for businesses, particularly in reducing the cost and improving the productivity. However, a large number of organizations are still too in their infancy to leverage the true potential of Industry 4.0 and its technologies. This paper takes a quantitative approach to reveal key insights from the companies that have implemented Industry 4.0 technologies. For this purpose, 238 technology companies in Malaysia were studied through a survey questionnaire. As technology companies are usually the first in line to adopt new technologies, they can be studied better as leaders in adopting the latest technologies. The findings of this descriptive study surfaced an array of insights in terms of Industry 4.0 readiness, Industry 4.0 technologies, leadership, strategy, and innovation. This research paper contributes by providing 10 key empirical insights on Industry 4.0 that can be utilized by managers to pace up their efforts towards digital transformation, and can help the policymakers in drafting the right policy to drive the digital revolution.


Author(s):  
Shihan Wang ◽  
Karlijn Sporrel ◽  
Herke van Hoof ◽  
Monique Simons ◽  
Rémi D. D. de Boer ◽  
...  

Just-in-time adaptive intervention (JITAI) has gained attention recently and previous studies have indicated that it is an effective strategy in the field of mobile healthcare intervention. Identifying the right moment for the intervention is a crucial component. In this paper the reinforcement learning (RL) technique has been used in a smartphone exercise application to promote physical activity. This RL model determines the ‘right’ time to deliver a restricted number of notifications adaptively, with respect to users’ temporary context information (i.e., time and calendar). A four-week trial study was conducted to examine the feasibility of our model with real target users. JITAI reminders were sent by the RL model in the fourth week of the intervention, while the participants could only access the app’s other functionalities during the first 3 weeks. Eleven target users registered for this study, and the data from 7 participants using the application for 4 weeks and receiving the intervening reminders were analyzed. Not only were the reaction behaviors of users after receiving the reminders analyzed from the application data, but the user experience with the reminders was also explored in a questionnaire and exit interviews. The results show that 83.3% reminders sent at adaptive moments were able to elicit user reaction within 50 min, and 66.7% of physical activities in the intervention week were performed within 5 h of the delivery of a reminder. Our findings indicated the usability of the RL model, while the timing of the moments to deliver reminders can be further improved based on lessons learned.


Author(s):  
Alexander Gleiss ◽  
Marco Kohlhagen ◽  
Key Pousttchi

AbstractThe healthcare industry has been slow to adopt new technologies and practices. However, digital and data-enabled innovations diffuse the market, and the COVID-19 pandemic has recently emphasized the necessity of a fundamental digital transformation. Available research indicates the relevance of digital platforms in this process but has not studied their economic impact to date. In view of this research gap and the social and economic relevance of healthcare, we explore how digital platforms might affect value creation in this market with a particular focus on Google, Apple, Facebook, Amazon, and Microsoft (GAFAM). We rely on value network analyses to examine how GAFAM platforms introduce new value-creating roles and mechanisms in healthcare through their manifold products and services. Hereupon, we examine the GAFAM-impact on healthcare by scrutinizing the facilitators, activities, and effects. Our analyses show how GAFAM platforms multifacetedly untie conventional relationships and transform value creation structures in the healthcare market.


Sign in / Sign up

Export Citation Format

Share Document