Leveraging Intelligent Compaction and Thermal Profiling Technologies to Improve Asphalt Pavement Construction Quality: A Case Study

2018 ◽  
Vol 2672 (26) ◽  
pp. 48-56 ◽  
Author(s):  
George K. Chang ◽  
Kiran Mohanraj ◽  
William A. Stone ◽  
Daniel J. Oesch ◽  
Victor (Lee) Gallivan
Keyword(s):  
Real Time ◽  
Satellite System ◽  
Material Transfer ◽  
Intelligent Compaction ◽  
Two Factors ◽  
Thermal Profiling ◽  
Compaction Control ◽  
Pavement Construction ◽  
Global Navigation Satellite

Intelligent compaction (IC) is an emerging technology with rollers equipped with global navigation satellite system (GNSS), an accelerometer-based measurement system, and an onboard color-coded display for real-time monitoring and compaction control. Paver-mounted thermal profiling (PMTP) is used to monitor asphalt surface temperatures behind a paver with a thermal scanner, and to track paver speeds, stops, and stop durations. Leveraging both IC and PMTP technologies allows for paving and compaction controls in real time, and for executing appropriate adjustments as needed. A case study is used to demonstrate the advantage of using both IC and PMTP over conventional operations. Postconstruction asphalt coring and tests, as well as pavement profile surveys were conducted to provide asphalt density data and pavement smoothness acceptance data for comparison and correlation analysis with IC and PMTP data. The data from 2 days of operations, one without the Material Transfer Vehicle (MTV) and another with the MTV, were analyzed and compared to illustrate the benefits of using IC, PMTP, and MTV for producing quality pavement products. Durability and smoothness are two key construction qualities for agencies and users of hot mix asphalt (HMA) pavements. These two factors also affect the long-term structural and functional pavement performance.

scholarly journals Inventory of Locations of Old Mining Works Using LiDAR Data: A Case Study in Slovakia

2021 ◽  
Vol 13 (12) ◽  
pp. 6981
Author(s):  
Marcela Bindzarova Gergelova ◽  
Slavomir Labant ◽  
Jozef Mizak ◽  
Pavel Sustek ◽  
Lubomir Leicher
Keyword(s):  
Satellite System ◽  
Precise Determination ◽  
Lidar Data ◽  
Positional Accuracy ◽  
Current Form ◽  
Mining History ◽  
Mining Works ◽  
Gnss Measurements ◽  
Global Navigation Satellite

The concept of further sustainable development in the area of administration of the register of old mining works and recent mining works in Slovakia requires precise determination of the locations of the objects that constitute it. The objects in this register have their uniqueness linked with the history of mining in Slovakia. The state of positional accuracy in the registration of objects in its current form is unsatisfactory. Different database sources containing the locations of the old mining works are insufficient and show significant locational deviations. For this reason, it is necessary to precisely locate old mining works using modern measuring technologies. The most effective approach to solving this problem is the use of LiDAR data, which at the same time allow determining the position and above-ground shape of old mining works. Two localities with significant mining history were selected for this case study. Positional deviations in the location of old mining works among the selected data were determined from the register of old mining works in Slovakia, global navigation satellite system (GNSS) measurements, multidirectional hill-shading using LiDAR, and accessible data from the open street map. To compare the positions of identical old mining works from the selected database sources, we established differences in the coordinates (ΔX, ΔY) and calculated the positional deviations of the same objects. The average positional deviation in the total count of nineteen objects comparing documents, LiDAR data, and the register was 33.6 m. Comparing the locations of twelve old mining works between the LiDAR data and the open street map, the average positional deviation was 16.3 m. Between the data sources from GNSS and the registry of old mining works, the average positional deviation of four selected objects was 39.17 m.

scholarly journals Methodology for the Correction of the Spatial Orientation Angles of the Unmanned Aerial Vehicle Using Real Time GNSS, a Shoreline Image and an Electronic Navigational Chart

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2810
Author(s):  
Krzysztof Naus ◽  
Piotr Szymak ◽  
Paweł Piskur ◽  
Maciej Niedziela ◽  
Aleksander Nowak
Keyword(s):  
Real Time ◽  
Spatial Orientation ◽  
Orientation Angle ◽  
Satellite System ◽  
Angle Measurement ◽  
Angle Correction ◽  
Lidar Measurements ◽  
Aerial Vehicle ◽  
Marine Applications ◽  
Global Navigation Satellite

Undoubtedly, Low-Altitude Unmanned Aerial Vehicles (UAVs) are becoming more common in marine applications. Equipped with a Global Navigation Satellite System (GNSS) Real-Time Kinematic (RTK) receiver for highly accurate positioning, they perform camera and Light Detection and Ranging (LiDAR) measurements. Unfortunately, these measurements may still be subject to large errors-mainly due to the inaccuracy of measurement of the optical axis of the camera or LiDAR sensor. Usually, UAVs use a small and light Inertial Navigation System (INS) with an angle measurement error of up to 0.5∘ (RMSE). The methodology for spatial orientation angle correction presented in the article allows the reduction of this error even to the level of 0.01∘ (RMSE). It can be successfully used in coastal and port waters. To determine the corrections, only the Electronic Navigational Chart (ENC) and an image of the coastline are needed.

scholarly journals HEIGHT DETERMINATION TECHNIQUES FOR THE NEXT NATIONAL HEIGHT SYSTEM OF FINLAND - A CASE STUDY

2015 ◽  
Vol 41 (4) ◽  
pp. 145-155
Author(s):  
Timo Saari ◽  
Markku Poutanen ◽  
Veikko Saaranen ◽  
Harri Kaartinen ◽  
Antero Kukko ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Pilot Project ◽  
Satellite System ◽  
Reference Station ◽  
Virtual Reference ◽  
Precise Levelling ◽  
Height Determination ◽  
Weak Points ◽  
Global Navigation Satellite

Precise levelling is known for its accuracy and reliability in height determination, but the process itself is slow, laborious and expensive. We have started a project to study methods for height determination that could decrease the creation time of national height systems without losing the accuracy and reliability that is needed for them. In the pilot project described here, we study some of the alternative techniques with a pilot field test where we compared them with the precise levelling. The purpose of the test is not to evaluate the mutual superiority or suitability of the techniques, but to establish the background for a larger test and to find strong and weak points of each technique. The techniques chosen for this study were precise levelling, Mobile Laser Scanning (MLS) and Global Navigation Satellite System (GNSS) levelling, which included static Global Positioning System (GPS) and Virtual Reference Station (VRS) measurements. This research highlighted the differences of the studied techniques and gave insights about the framework and procedure for the later experiments. The research will continue in a larger scale, where the suitability of the techniques regarding the height systems is to be determined.

On the phase detrending to disentangle refraction and diffraction on GNSS signals: a case study over Antarctica

2021 ◽  
Author(s):  
Luca Spogli ◽  
Hossein Ghobadi ◽  
Antonio Cicone ◽  
Lucilla Alfonsi ◽  
Claudio Cesaroni ◽  
...  
Keyword(s):  
Single Case ◽  
Cutoff Frequency ◽  
Satellite System ◽  
Fine Tuning ◽  
Scintillation Index ◽  
Ionospheric Scintillation ◽  
Iterative Filtering ◽  
Global Navigation Satellite ◽  
Value Changes

<p>We investigate the reliability of the phase scintillation index determined by receiving Global Navigation Satellite System (GNSS) signals at ground in the high-latitudes. To the scope, we report about the capabilities of recently introduced detrending scheme based on the signal decomposition provided by the Fast Iterative Filtering (FIF) technique. This detrending scheme enables a fine tuning of the cutoff frequency for phase detrending used in the phase scintillation index definition, aimed at disentangling diffraction and refraction effects. On a single case study based on GPS and Galileo data taken by a GNSS Ionospheric Scintillation Monitor Receiver (ISMR) in Concordia Station (Antarctica), we show how the FIF-based detrending allows deriving adaptive cutoff frequencies, whose value changes minute-by-minute. They are found to range between 0.4 Hz and 1.2 Hz. This allows better accounting for diffractive effects in phase scintillation index calculation and also showing the limitations on the use of such index, being still widely used in the community, both to characterize the features of ionospheric irregularities and to adopt mitigation solutions.</p>

APLICAÇÃO DE GEOTECNOLOGIAS NA ANÁLISE DE VIABILIDADE TÉCNICA E ECONÔMICA DO PROJETO DE IMPLANTAÇÃO DO IFMA - CAMPUS ITAQUI-BACANGA.

2021 ◽  
Vol 14 (2) ◽  
pp. 105
Author(s):  
Maelckson Bruno Barros Gomes ◽  
André Luis Silva Santos
Keyword(s):  
Real Time ◽  
Global Navigation Satellite System ◽  
Satellite System ◽  
Navigation Satellite ◽  
Real Time Kinematic ◽  
Global Navigation ◽  
Global Navigation Satellite

<p class="04CorpodoTexto">Este artigo tem por objetivo aplicar geotecnologias para obtenção de informações planialtimétricas a fim de avaliar a viabilidade de implantação do campus Centro Histórico/Itaqui-Bacanga do IFMA. Considerando que para realização de levantamento por métodos tradicionais é recomendado que seja realizado o destocamento e a limpeza do terreno previamente, avaliou-se a realização do levantamento planialtimétrico a partir de um par de receptores <em>Global Navigation Satellite System</em> (GNSS) pelo método <em>Real Time Kinematic</em> (RTK) pós processado e também a partir da realização de levantamento fotogramétrico, utilizando aeronave remotamente pilotada (ARP), popularmente conhecida como drone. Esta análise permitiu demonstrar que o aerolevantamento com a ARP pode ser aplicado na concepção inicial de um projeto de engenharia, conforme classificação do Tribunal de Contas da União (TCU) para níveis de precisão, pois obteve-se uma diferença orçamentária de 19% entre os projetos elaborados a partir das duas geotecnologias.</p><div> </div>

scholarly journals Online Near real-time Mine Disaster Monitoring System Based on Geosensor Networks

2016 ◽  
Vol 12 (03) ◽  
pp. 64
Author(s):  
Haifeng Hu
Keyword(s):  
Real Time ◽  
Monitoring System ◽  
Satellite System ◽  
Open Pit ◽  
Observation Data ◽  
Complex Data ◽  
Disaster Monitoring ◽  
Process Observation ◽  
Global Navigation Satellite ◽  
Safety And Stability

Abstract—An online automatic disaster monitoring system can reduce or prevent geological mine disasters to protect life and property. Global Navigation Satellite System receivers and the GeoRobot are two kinds of in-situ geosensors widely used for monitoring ground movements near mines. A combined monitoring solution is presented that integrates the advantages of both. In addition, a geosensor network system to be used for geological mine disaster monitoring is described. A complete online automatic mine disaster monitoring system including data transmission, data management, and complex data analysis is outlined. This paper proposes a novel overall architecture for mine disaster monitoring. This architecture can seamlessly integrate sensors for long-term, remote, and near real-time monitoring. In the architecture, three layers are used to collect, manage and process observation data. To demonstrate the applicability of the method, a system encompassing this architecture has been deployed to monitor the safety and stability of a slope at an open-pit mine in Inner Mongolia.

scholarly journals Real-Time Precise Point Positioning Using Orbit and Clock Corrections as Quasi-Observations for Improved Detection of Faults

2018 ◽  
Vol 71 (4) ◽  
pp. 769-787 ◽  
Author(s):  
Ahmed El-Mowafy
Keyword(s):  
Real Time ◽  
Precise Point Positioning ◽  
Exclusion Process ◽  
Satellite Orbit ◽  
Satellite System ◽  
Navigation Satellite ◽  
System Service ◽  
Point Positioning ◽  
Predicted Values ◽  
Global Navigation Satellite

Real-time Precise Point Positioning (PPP) relies on the use of accurate satellite orbit and clock corrections. If these corrections contain large errors or faults, either from the system or by meaconing, they will adversely affect positioning. Therefore, such faults have to be detected and excluded. In traditional PPP, measurements that have faulty corrections are typically excluded as they are merged together. In this contribution, a new PPP model that encompasses the orbit and clock corrections as quasi-observations is presented such that they undergo the fault detection and exclusion process separate from the observations. This enables the use of measurements that have faulty corrections along with predicted values of these corrections in place of the excluded ones. Moreover, the proposed approach allows for inclusion of the complete stochastic information of the corrections. To facilitate modelling of the orbit and clock corrections as quasi-observations, International Global Navigation Satellite System Service (IGS) real-time corrections were characterised over a six-month period. The proposed method is validated and its benefits are demonstrated at two sites using three days of data.

scholarly journals Multi-GNSS Combined Precise Point Positioning Using Additional Observations with Opposite Weight for Real-Time Quality Control

2019 ◽  
Vol 11 (3) ◽  
pp. 311 ◽  
Author(s):  
Wenju Fu ◽  
Guanwen Huang ◽  
Yuanxi Zhang ◽  
Qin Zhang ◽  
Bobin Cui ◽  
...  
Keyword(s):  
Quality Control ◽  
Real Time ◽  
Precise Point Positioning ◽  
Satellite System ◽  
Convergence Time ◽  
Navigation Satellite ◽  
Positioning Accuracy ◽  
Global Navigation ◽  
Point Positioning ◽  
Global Navigation Satellite

The emergence of multiple global navigation satellite systems (multi-GNSS), including global positioning system (GPS), global navigation satellite system (GLONASS), Beidou navigation satellite system (BDS), and Galileo, brings not only great opportunities for real-time precise point positioning (PPP), but also challenges in quality control because of inevitable data anomalies. This research aims at achieving the real-time quality control of the multi-GNSS combined PPP using additional observations with opposite weight. A robust multiple-system combined PPP estimation is developed to simultaneously process observations from all the four GNSS systems as well as single, dual, or triple systems. The experiment indicates that the proposed quality control can effectively eliminate the influence of outliers on the single GPS and the multiple-system combined PPP. The analysis on the positioning accuracy and the convergence time of the proposed robust PPP is conducted based on one week’s data from 32 globally distributed stations. The positioning root mean square (RMS) error of the quad-system combined PPP is 1.2 cm, 1.0 cm, and 3.0 cm in the east, north, and upward components, respectively, with the improvements of 62.5%, 63.0%, and 55.2% compared to those of single GPS. The average convergence time of the quad-system combined PPP in the horizontal and vertical components is 12.8 min and 12.2 min, respectively, while it is 26.5 min and 23.7 min when only using single-GPS PPP. The positioning performance of the GPS, GLONASS, and BDS (GRC) combination and the GPS, GLONASS, and Galileo (GRE) combination is comparable to the GPS, GLONASS, BDS and Galileo (GRCE) combination and it is better than that of the GPS, BDS, and Galileo (GCE) combination. Compared to GPS, the improvements of the positioning accuracy of the GPS and GLONASS (GR) combination, the GPS and Galileo (GE) combination, the GPS and BDS (GC) combination in the east component are 53.1%, 43.8%, and 40.6%, respectively, while they are 55.6%, 48.1%, and 40.7% in the north component, and 47.8%, 40.3%, and 34.3% in the upward component.

scholarly journals Determination of the Stability of High-Steep Slopes by Global Navigation Satellite System (GNSS) Real-Time Monitoring in Long Wall Mining

2020 ◽  
Vol 10 (6) ◽  
pp. 1952 ◽  
Author(s):  
Xugang Lian ◽  
Zoujun Li ◽  
Hongyan Yuan ◽  
Haifeng Hu ◽  
Yinfei Cai ◽  
...  
Keyword(s):  
Real Time ◽  
Global Navigation Satellite System ◽  
Satellite System ◽  
Slope Movement ◽  
Navigation Satellite ◽  
Real Time Monitoring ◽  
Uniform Deformation ◽  
Working Face ◽  
Global Navigation Satellite ◽  
Steep Slopes

Surface movement and deformation induced by underground coal mining causes slopes to collapse. Global Navigation Satellite System (GNSS) real-time monitoring can provide early warnings and prevent disasters. A stability analysis of high-steep slopes was conducted in a long wall mine in China, and a GNSS real-time monitoring system was established. The moving velocity and displacement at the monitoring points were an integrated response to the influencing factors of mining, topography, and rainfall. Underground mining provided a continuous external driving force for slope movement, the steep terrain provided sufficient slip conditions in the slope direction, and rainfall had an acceleration effect on slope movement. The non-uniform deformation, displacement field, and time series images of the slope body revealed that ground failure was concentrated in the area of non-uniform deformation. The non-uniform deformation was concentrated ahead of the working face, the speed of deformation behind the working face was reduced, the instability of the slope body was increased, and the movement of the top of the slope was larger than at the foot. The high-steep slope stability in the mine was influenced by the starting deformation (low stability), iso-accelerated deformation (increased stability), deformation deceleration (reduced stability), and deformation remaining unchanged (improved stability).

Sign in / Sign up

Export Citation Format

Share Document