Web-Based Data Visualization Platform for MATSim

Author(s):  
Billy Charlton ◽  
Janek Laudan

There are many tools available for analyzing MATSim transport simulation results, both open-source and commercial. This research builds a new open-source visualization platform for MATSim outputs that is entirely web-based. After initial experiments with many different web technologies, a client-server platform design emerges which leverages the advanced user interface capabilities of modern browsers on the front-end, and relies on back-end server processing for more processor-intensive tasks. The initial platform is now operational and includes several aggregate-level visualizations including origin–destination flows, transit supply, and emissions levels as well as a fully disaggregate traffic animation visualization. These visualizations are general enough to be useful for various projects. Further work is needed to make them more compelling and the platform more useful for practitioners.

Author(s):  
Spyros Panagiotakis ◽  
Ioannis Vakintis ◽  
Haroula Andrioti ◽  
Andreas Stamoulias ◽  
Kostas Kapetanakis ◽  
...  

This chapter at first surveys the Web technologies that can enable ubiquitous and pervasive multimedia communications over the Web and then reviews the challenges that are raised by their combination. In this context, the relevant HTML5 APIs and technologies provided for service adaptation are introduced and the MPEG-DASH, X3Dom, and WebRTC frameworks are discussed. What is envisaged for the future of mobile multimedia is that with the integration of these technologies one can shape a diversity of future pervasive and personalized cloud-based Web applications, where the client-server operations are obsolete. In particular, it is believed that in the future Web cloud-based Web applications will be able to communicate, stream, and transfer adaptive events and content to their clients, creating a fully collaborative and pervasive Web 3D environment.


2020 ◽  
Author(s):  
Brian Day ◽  
Emily Law ◽  

<p><strong>Introduction:</strong>  In its investigations of the planet Mercury, NASA’s MESSENGER returned an immense amount of data detailing the dynamic surface of our solar system’s innermost planet. As the European and Japanese space agencies prepared for the launch of BepiColombo, the next mission to explore Mercury, BepiColombo’s project science team asked NASA to produce a new portal within the Solar System Treks suite (https://trek.nasa.gov) featuring data returned by MESSENGER from Mercury. This new portal would be used both for mission planning and for public outreach by the BepiColombo mission. While initially populated with Messenger data, the portal is also being designed to facilitate visualization, analysis, and dissemination of data from BepiColombo after it commences science operations in orbit around Mercury. The initial release of the Mercury Trek in 2019 shortly followed the launch of BepiColombo on its journey to Mercury.</p> <p><strong>The Mercury Trek Portal:</strong>  The initial release of Mercury Trek in July 2019 featured data products from the Mercury Dual Imaging System (MDIS) instrument that operated aboard NASA’s MErcury Surface, Space ENvironment, GEochemistry and Ranging (MESSENGER) mission while in orbit around Mercury from 2011 to 2015. These products include the MDIS Global Mosaic, MDIS BDR Global Mosaic, MDIS Color Global Mosaic, MDIS MD3 Color Global Mosaic, MDIS Enhanced Color Global Mosaic, MDIS LOI (low-incidence angle) Global Mosaic, MDIS Global Digital Elevation Model (DEM), and MDIS Color Hillshade Global map derived from the DEM. An updated release in June 2020 featured enhanced search capabilities, an updated user interface, the option to have user interface control labels in either English or Japanese, and the addition of numerous new data products. These include high resolution MDIS mosaics, DEMs, and slope data for selected regions, and gravimetric maps including crustal thickness, gravity anomaly, gravity degree strength, and gravity disturbance. Also included are 1:5M geologic maps for the Beethoven, Discovery, Kuiper, Michaelangelo, Shakespeare, Tolstoj, and Victoria regions.</p> <p>Mercury Trek’s data visualization capabilities make it easy to stack and blend different data layers in order to optimize depictions of a wide variety of surface features. Data products can be viewed in equatorial, or polar projected views, or on an interactive 3D globe. The Trek interface allows the user to maneuver a first-person visualization of “flying” across the surface of the Mercury.</p> <p>Analysis tools make it easy to measure distances (either straight-line or along a user-defined path) and to create elevation profiles for surface features. Users can draw user-defined bounding boxes across Vesta’s terrain to generate STL or OBJ files for 3D printing. They can also draw a freehand path anywhere across the surface and have Vesta Trek return a QR code that can be scanned into a smartphone (Android or iOS). The smartphone can then be placed into a pair of inexpensive cardboard-compatible goggles. The user will then be able to fly their defined path in virtual reality.</p> <p>We intend to continue working with the BepiColombo mission and the greater planetary science community to enhance the new Mercury Trek portal with additional data products, and solicit suggestions from the community.</p> <p><strong>One Component in an Integrated Suite:</strong>  Mercury Trek is one of a growing number of portals in NASA’s Solar System Treks Project, available at https://trek.nasa.gov. NASA's Solar System Trek online portals for lunar and planetary mapping and modeling provide web-based suites of interactive data visualization and analysis tools to enable mission planners, planetary scientists, students, and the general public to access mapped data products from past and current missions for Mercury, the Moon, Mars, Vesta, Ceres, Titan, seven of Saturn’s smaller icy moons (Dione, Enceladus, Iapetus Mimas, Phoebe, Rhea, and Tethys), Ryugu, and Bennu. As web-based toolsets, the portals do not require users to purchase or install any software beyond current web browsers. These portals are being used for site selection and analysis by NASA and a number of its international partners, supporting upcoming missions.</p> <p><strong>Acknowledgements: </strong>The authors would like to thank the Planetary Science Division of NASA’s Science Mission Directorate, the Science Engagement and Partnerships Division of NASA’s Science Mission Directorate, and the Advanced Explorations Systems Program of NASA’s Human Exploration and Operations Mission Directorate for their support and guidance in the development of the Solar System Treks.</p>


2016 ◽  
Vol 12 (04) ◽  
pp. 68
Author(s):  
Alexandra Ribeiro ◽  
Vitor Sousa ◽  
Alberto Cardoso

This work describes a GIS web-based open source platform for wireless in situ geosensor data visualization and distributed geoprocessing. Emphasis is put on: i) visualization of sensor measurements and sensor location on a map; ii) geoprocessing of these data; iii) and, visualization of geoprocessing results on a map. The platform combines the Open Geospatial Consortium (OGC) Sensor Web Enablement (SWE) standards, in particular the Sensor Observation Service (SOS), and the OGC Web Processing Service (WPS). Several results are presented using different methods of spatial interpolation of air temperature measurements as geoprocessing tasks.


2018 ◽  
Vol 9 (3) ◽  
pp. 36-47
Author(s):  
Pushpa Singh ◽  
Narendra Singh

Free and open source software (FOSS) differs from proprietary software. FOSS facilitates the design of various applications per the user's requirement. Web applications are not exceptional in this way. Web-based applications are mostly based on client server architecture. This article is an analytical study of FOSS products used in web-based client server architecture. This article will provide information about FOSS product such as FireFox (web browser), Apache (web server) and MySQL (RDBMS). These reveal that various FOSS products such as Apache server covers 65% of the market share, while MySQL covers 58.7% market share and hold the top-most rank.


2019 ◽  
Vol 214 ◽  
pp. 03032
Author(s):  
Derek Weitzel ◽  
Brian Bockelman ◽  
Marian Zvada ◽  
Kevin Retzke ◽  
Shreyas Bhat

The OSG has long maintained a central accounting system called Gratia. It uses small probes on each computing and storage resource in order to collect resource usage. The probes report to a central collector which stores the usage in a database. The database is then queried to generate reports. As the OSG aged, the size of the database grew very large. It became too large for the database technology to efficiently query to generate detailed reports. The design of a replacement requires data storage that could be queried efficiently to generate multi-year reports. Additionally, it requires flexibilityto add new attributes to the collected data. In this paper we will describe updates to the GRACC architecture in the last 18 months. GRACC uses modern web technologies that were designed for large data storage, query, and visualization. That includes the open source database Elasticsearch, message broker software RabbitMQ, and Grafana and Kibana as data visualization platforms. It uses multiple agents that perform operations on the data to transform it for easier querying and summarization.


We present in this paper an integrated framework for collection and analysis of Facet-based text data. The integrated framework consists of four components: (1) user interface, (2) web crawler, (3) data analyzer, and (4) database (DB). User interface is used to set input Facet and option values for web crawling and text data analysis using a graphical user interface (GUI). In fact, it offers outcomes of research by data visualization. The web crawler collects text data from articles posted on the web based on input Facets. The data analyzer classifies papers in "relevant articles" (i.e., word sets to be included on such posts) and "nonrelevant articles" with predefined information. It then analyzes the text data of the relevant articles and visualizes the results of the data analysis. Ultimately, the DB holds the generated text information, the predefined user-defined expertise and the outcomes of data analysis and data visualization. We verify the feasibility of an integrated framework by means of proof of concept (PoC) prototyping. The experimental results show that the implemented prototype reliably collects and analyzes the text data of the articles.


2017 ◽  
Author(s):  
Peter Kerpedjiev ◽  
Nezar Abdennur ◽  
Fritz Lekschas ◽  
Chuck McCallum ◽  
Kasper Dinkla ◽  
...  

AbstractWe present HiGlass, an open source visualization tool built on web technologies that provides a rich interface for rapid, multiplex, and multiscale navigation of 2D genomic maps alongside 1D genomic tracks, allowing users to combine various data types, synchronize multiple visualization modalities, and share fully customizable views with others. We demonstrate its utility in exploring different experimental conditions, comparing the results of analyses, and creating interactive snapshots to share with collaborators and the broader public. HiGlass is accessible online athttp://higlass.ioand is also available as a containerized application that can be run on any platform.


Author(s):  
Pushpa Singh ◽  
Narendra Singh

Free and open source software (FOSS) differs from proprietary software. FOSS facilitates the design of various applications per the user's requirement. Web applications are not exceptional in this way. Web-based applications are mostly based on client server architecture. This article is an analytical study of FOSS products used in web-based client server architecture. This article will provide information about FOSS product such as FireFox (web browser), Apache (web server) and MySQL (RDBMS). These reveal that various FOSS products such as Apache server covers 65% of the market share, while MySQL covers 58.7% market share and hold the top-most rank.


Sign in / Sign up

Export Citation Format

Share Document