Effect of three non-axisymmetric stator schemes on compressor performance with distorted inlet

2021 ◽  
pp. 095441002110498
Author(s):  
Wenguang Fu ◽  
Peng Sun
Keyword(s):  
Flow Field ◽  
Stability Margin ◽  
Aerodynamic Performance ◽  
Uniform Flow ◽  
Transonic Compressor ◽  
Maximum Stability ◽  
Compressor Performance ◽  
Twisted Blade ◽  
The Stability ◽  
Stator Design

In the boundary layer ingesting propulsion system, the compressor suffers from a non-uniform flow field. The compressor operating with distorted inflow continuously results in the loss of aerodynamic performance and stability margin. In this paper, three non-axisymmetric configurations are described for the stator of a transonic compressor to match the non-uniform flow field. The flow fields with distorted inflow at near stall condition are obtained and analyzed, the effects of the prototype stator and the three non-axisymmetric stators on aerodynamic performance are compared in detail. Results show that the non-axisymmetric stator schemes can effectively improve the stability margin of the transonic compressor and the maximum stability margin is relatively increased by 22.3% in all the three non-axisymmetric stators. The non-axisymmetric stator design is effective on decreasing the aerodynamic losses and improving the performance of the compressor operating with distorted inflow. Overall, the results show that in the design of the non-axisymmetric stator, the adoption of a curved-twisted blade and the increase of cascade solidity have the potential to reduce loss sources caused by distorted inflow.

Numerical Analysis to Investigate the Effect of Swept Rotor on the Overall Performance of a Transonic Compressor Stage

2014 ◽  
Author(s):  
Shobhavathy M. Thimmaiah ◽  
Ramesha Gurikelu ◽  
Nisha Sherief
Keyword(s):  
Flow Field ◽  
Total Pressure ◽  
Pressure Ratio ◽  
Stability Margin ◽  
Compressor Stage ◽  
Operating Range ◽  
Transonic Compressor ◽  
Overall Performance ◽  
Design Speed ◽  
The Stability

This paper presents the steady state numerical analyses carried out to investigate the effect of forward and backward swept rotor on the overall performance and stability margin of single stage transonic axial flow compressor. Initially, the analyses were carried out on a radially stacked rotor/baseline configuration and obtained the overall performance map of the compressor stage. These results were compared with the available experimental data for validation. Further, investigations were carried out on geometrically modified rotor with six configurations having 5, 10 and 15° forward and backward sweep. A commercial 3-Dimensional CFD package, ANSYS FLUENT was used to compute the complex flow field of transonic compressor rotors. The flow field structures were studied with the help of Mach number total pressure contours. The results of modified rotor geometry indicated that the peak adiabatic efficiency and the total pressure ratio for all the tested forward and backward swept rotor configurations are marginally higher than that of the baseline configuration at all speeds. The operating ranges of all the swept rotor configurations are found to be higher than that of the baseline configuration. The operating range is broader at lower operating speeds than at design speed condition. Rotor with 10° forward sweep and 5° backward sweep indicated the noteworthy improvement in the operating range against the baseline configuration. The stability margin of 11.3, 6.6, 5.2 and 3.5% at 60, 80, 90 and 100% of the design speed respectively compared to the baseline configuration obtained from 10° forward sweep. Rotor with 5° backward sweep showed the stability margin of 12, 4, 3.9 and 3% at 60, 80, 90 and 100% of the design speed respectively compared to the baseline configuration.

Numerical Investigation on the Effects of Circumferential Coverage of Injection in a Transonic Compressor With Discrete Tip Injection

2014 ◽  
Author(s):  
Wei Wang ◽  
Wuli Chu ◽  
Haoguang Zhang ◽  
Yanhui Wu
Keyword(s):  
Total Pressure ◽  
Pressure Ratio ◽  
Time Lag ◽  
Three Dimensional ◽  
Stability Margin ◽  
Transonic Compressor ◽  
Blade Tip ◽  
Tip Injection ◽  
The Stability ◽  
Total Pressure Ratio

Discrete tip injection upstream of the rotor tip is an effective technique to extend stability margin for a compressor system in an aeroengine. The current study investigates the effects of injectors’ circumferential coverage on compressor performance and stability using time-accurate three-dimensional numerical simulations for multi passages in a transonic compressor. The percentage of circumferential coverage for all the six injectors ranges from 6% to 87% for the five investigated configurations. Results indicate that circumferential coverage of tip injection can greatly affect compressor stability and total pressure ratio, but has little influence on adiabatic efficiency. The improvement of compressor total pressure ratio is linearly related with the increasing circumferential coverage. The unsteady flow fields show that there exists a non-ignorable time lag of the injection effects between the passage inlet and outlet, and blade tip loading will not decline until the injected flow reaches the passage outlet. Stability improves sharply with the increasing circumferential coverage when the coverage is less than 27%, but increases flatly for the rest. It is proven that the injection efficiency which is a measurement of averaged blockage decrement in the injected region is an effective guideline to predict the stability improvement.

Unsteady Effects of Blade Row Interaction on Flow Field and Aerodynamic Performance of a Transonic Centrifugal Compressor Impeller

2021 ◽  
Author(s):  
Kazutoyo Yamada ◽  
Kosuke Kubo ◽  
Kenichiro Iwakiri ◽  
Yoshihiro Ishikawa ◽  
Hirotaka Higashimori
Keyword(s):  
Steady State ◽  
Flow Field ◽  
Centrifugal Compressor ◽  
Aerodynamic Performance ◽  
Vaned Diffuser ◽  
Tip Leakage ◽  
Transonic Centrifugal Compressor ◽  
Compressor Performance ◽  
Unsteady Effects ◽  
Rans Analysis

Abstract This paper discusses the unsteady effects associated with the impeller/diffuser interaction on the internal flow field and aerodynamic performance of a centrifugal compressor. In centrifugal compressors with a vaned diffuser, the flow field is inherently unsteady due to the influence of interaction between the impeller and the diffuser, and the unsteadiness of the flow field can often have a great influence on the aerodynamic performance of the compressor. Especially in high-load compressors, it is considered that large unsteady effects are produced on the compressor performance with a strong flow unsteadiness. The unsteady effect on aerodynamic performance of the compressor has not been fully revealed yet, and sometimes the steady-state RANS simulation finds it difficult to predict the compressor performance. In this study, numerical simulations have been conducted for a transonic centrifugal compressor with a vaned diffuser. The unsteady effects were clarified by comparing the numerical results between a single-passage steady-state RANS analysis and a full-annulus unsteady RANS analysis. The comparison of simulation results showed the difference in entropy generation in the impeller. The impingement of diffuser shock wave with the impeller pressure surface brought about a cyclic increase in the blade loading near the impeller trailing edge. Accordingly, with increasing tip leakage flow rate, a second tip leakage vortex was newly generated in the aft part of the impeller, which resulted in additional unsteady loss generation inside the impeller.

Inducer Stall in a Centrifugal Compressor With Inlet Distortion

1987 ◽  
Vol 109 (1) ◽  
pp. 27-35 ◽  
Author(s):  
I. Ariga ◽  
S. Masuda ◽  
A. Ookita
Keyword(s):  
Flow Rate ◽  
Centrifugal Compressor ◽  
Stability Margin ◽  
Rotating Stall ◽  
Characteristic Parameters ◽  
Inlet Distortion ◽  
Rate Region ◽  
Compressor Performance ◽  
The Stability ◽  
Lower Flow Rate

The effects of inlet distortion on the inducer stall in a centrifugal compressor are investigated. Cases of both radial and circumferential distortion are investigated. It is shown that the rotating stall onset is amplified by radial distortions, and restrained by circumferential distortions. These results are compared with calculations based on the small disturbance theory. The authors find that the stall onset is governed by the characteristic parameters related to the lower flow rate region for radial distortions, but affected by those of the higher flow rate region for circumferential distortion. It is shown that the process of stall is different for each distortion pattern. Existence of inlet distortion reduces compressor performance characteristics and strongly influences the stability margin.

Aerodynamic-Rotordynamic Interaction in Axial Compression Systems: Part II — Impact of Interaction on Overall System Stability

2002 ◽  
Author(s):  
Ammar A. Al-Nahwi ◽  
James D. Paduano ◽  
Samir A. Nayfeh
Keyword(s):  
Flow Field ◽  
Axial Compression ◽  
Coupling Parameter ◽  
Stability Margin ◽  
Integrated Treatment ◽  
Tip Clearance ◽  
System Stability ◽  
Aerodynamic Forces ◽  
Design Point ◽  
The Stability

This paper presents an integrated treatment of the dynamic coupling between the flow field (aerodynamics) and rotor structural vibration (rotordynamics) in axial compression systems. This work is motivated by documented observations of tip clearance effects on axial compressor flow field stability, the destabilizing effect of fluid-induced aerodynamic forces on rotordynamics, and their potential interaction. This investigation is aimed at identifying the main nondimensional design parameters governing this interaction, and assessing its impact on overall stability of the coupled system. The model developed in this work employs a reduced-order Moore-Greitzer model for the flow field, and a Jeffcott-type model for the rotordynamics. The coupling between the fluid and structural dynamics is captured by incorporating a compressor pressure rise sensitivity to tip clearance, together with a momentum based model for the aerodynamic forces on the rotor (presented in Part I of this paper). The resulting dynamic model suggests that the interaction is largely governed by two nondimensional parameters: the sensitivity of the compressor to tip clearance and the ratio of fluid mass to rotor mass. The aerodynamic-rotordynamic coupling is shown to generally have an adverse effect on system stability. For a supercritical rotor and a typical value of the coupling parameter, the stability margin to the left of the design point is shown to decrease by about 5% in flow coefficient (from 20% for the uncoupled case). Doubling the value of the coupling parameter not only produces a reduction of about 8% in the stability margin at low flow coefficients, but also gives rise to a rotordynamic instability at flow coefficients 7% higher than the design point.

scholarly journals Prediction of Non-Uniform Distorted Flows, Effects on Transonic Compressor Using CFD, Regression Analysis and Artificial Neural Networks

2021 ◽  
Vol 11 (8) ◽  
pp. 3706
Author(s):  
Muhammad Umer Sohail ◽  
Hossein Raza Hamdani ◽  
Asad Islam ◽  
Khalid Parvez ◽  
Abdul Munem Khan ◽  
...  
Keyword(s):  
Computational Cost ◽  
Axial Compressor ◽  
Radial Pressure ◽  
Stability Range ◽  
Stall Margin ◽  
Ambient Temperatures ◽  
Transonic Compressor ◽  
Compressor Performance ◽  
Artificial Neural ◽  
The Stability

Non-uniform inlet flows frequently occur in aircrafts and result in chronological distortions of total temperature and total pressure at the engine inlet. Distorted inlet flow operation of the axial compressor deteriorates aerodynamic performance, which reduces the stall margin and increases blade stress levels, which in turn causes compressor failure. Deep learning is an efficient approach to predict catastrophic compressor failure, and its stability for better performance at minimum computational cost and time. The current research focuses on the development of a transonic compressor instability prediction tool for the comprehensive modeling of axial compressor dynamics. A novel predictive approach founded by an extensive CFD-based dataset for supervised learning has been implemented to predict compressor performance and behavior at different ambient temperatures and flow conditions. Artificial Neural Network-based results accurately predict compressor performance parameters by minimizing the Root Mean Square Error (RMSE) loss function. Computational results show that, as compared to the tip radial pressure distortion, hub radial pressure distortion has improved the stability range of the compressor. Furthermore, the combined effect of pressure distortion with the bulk flow has a qualitative and deteriorator effect on the compressor.

Effects of Probe Stem Surface Suction on the Aerodynamic Performance of a Compressor

2021 ◽  
Author(s):  
Yafei Zhong ◽  
Hongwei Ma ◽  
Yi Yang
Keyword(s):  
Flow Field ◽  
Pressure Ratio ◽  
Three Dimensional ◽  
Stability Margin ◽  
Aerodynamic Performance ◽  
Vortex Identification ◽  
Flow Angle ◽  
Surface Suction ◽  
Three Dimensional Models ◽  
Downstream Flow

Abstract Pneumatic probes can be used to obtain the flow field parameters such as pressure, temperature and air flow angle, and has been widely used to measure the flow field in compressors. When probes are inserted into the compressor to measure the flow field, the probe stems will cause blockage in the flow field and interfere with it, reducing the pressure ratio and efficiency of the compressor. This paper proposes a method to reduce the interference of the stems by their surface suction. Three-dimensional models of a compressor with different types of probe stems were established. Computational Fluid Dynamics (CFD) simulations of the flow within a low-speed compressor without/with the probe stems and the stems having surface suction holes were conducted. The involved numerical methods were validated by the experimental data. The effects of the surface suction holes on the performance of this compressor were compared and analyzed in terms of blockage coefficient in the passage by the vortex identification method. The results show that probe stem surface suction can reduce the blockage of the stems on the downstream flow field. Compared with the situation of no suction, there is an optimal suction mass flow rate that can minimize the adverse effect of probe stems on the compressor aerodynamic performance. For the same type of the probe stems, the compressor performances, i.e., pressure ratio, efficiency and stability margin, are recovered with the increase of the number of suction holes along the span-wise direction.

Aerodynamic-Rotordynamic Interaction in Axial Compression Systems—Part II: Impact of Interaction on Overall System Stability

2003 ◽  
Vol 125 (3) ◽  
pp. 416-424 ◽  
Author(s):  
Ammar A. Al-Nahwi ◽  
James D. Paduano ◽  
Samir A. Nayfeh
Keyword(s):  
Flow Field ◽  
Axial Compression ◽  
Coupling Parameter ◽  
Stability Margin ◽  
Integrated Treatment ◽  
Tip Clearance ◽  
System Stability ◽  
Aerodynamic Forces ◽  
Design Point ◽  
The Stability

This paper presents an integrated treatment of the dynamic coupling between the flow field (aerodynamics) and rotor structural vibration (rotordynamics) in axial compression systems. This work is motivated by documented observations of tip clearance effects on axial compressor flow field stability, the destabilizing effect of fluid-induced aerodynamic forces on rotordynamics, and their potential interaction. This investigation is aimed at identifying the main nondimensional design parameters governing this interaction, and assessing its impact on overall stability of the coupled system. The model developed in this work employs a reduced-order Moore-Greitzer model for the flow field, and a Jeffcott-type model for the rotordynamics. The coupling between the fluid and structural dynamics is captured by incorporating a compressor pressure rise sensitivity to tip clearance, together with a momentum based model for the aerodynamic forces on the rotor (presented in Part I of this paper). The resulting dynamic model suggests that the interaction is largely governed by two nondimensional parameters: the sensitivity of the compressor to tip clearance and the ratio of fluid mass to rotor mass. The aerodynamic-rotordynamic coupling is shown to generally have an adverse effect on system stability. For a supercritical rotor and a typical value of the coupling parameter, the stability margin to the left of the design point is shown to decrease by about 5% in flow coefficient (from 20% for the uncoupled case). Doubling the value of the coupling parameter not only produces a reduction of about 8% in the stability margin at low flow coefficients, but also gives rise to a rotordynamic instability at flow coefficients 7% higher than the design point.

The Dynamical Behaviour of a Flexible Cable in a Uniform Flow Field

1971 ◽  
Vol 22 (2) ◽  
pp. 183-195 ◽  
Author(s):  
R. R. Huffman ◽  
Joseph Genin
Keyword(s):  
Mathematical Model ◽  
Shock Waves ◽  
Flow Field ◽  
Flow Speed ◽  
Dynamical Behaviour ◽  
Uniform Flow ◽  
Aerodynamic Forces ◽  
Cable Length ◽  
Flow Speeds ◽  
The Stability

SummaryA non-linear mathematical model for the study of the dynamics of an extensible cable subjected to aerodynamic forces generated by a uniform flow field is formulated. Solutions are found considering large displacement caused by suddenly applied loads (i.e., gusts, shock waves, turbulence) for a range of flow speeds and cable lengths. Transition from overdamped to oscillatory motion is observed when flow speed and cable length are increased and decreased respectively. The stability of the system is discussed.

Sign in / Sign up

Export Citation Format

Share Document