Characterisation of Hydroxyapatite/Bacterial Cellulose Nanocomposites

2009 ◽  
Vol 17 (6) ◽  
pp. 353-358 ◽  
Author(s):  
Shengnan Zhang ◽  
Guangyao Xiong ◽  
Fang He ◽  
Yuan Huang ◽  
Yulin Wang ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Bacterial Cellulose ◽  
Photoelectron Spectroscopy ◽  
Thermo Gravimetric Analysis ◽  
Hydroxyl Groups ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Cellulose Nanocomposites

A novel nanocomposite material consisting of hydroxyapatite (HAp) deposited on a phosphorylated bacterial cellulose (BC) has been synthesised via a biomimetic route. X-ray photoelectron spectroscopy (XPS) showed that phosphate groups were successfully introduced to the hydroxyl groups of BC by phosphorylation reaction to promote the growth of calcium phosphate. Transmission electron microscopy (TEM) and the corresponding selected area electron diffraction (SAED) patterns of HAp/BC demonstrated that HAp crystals wrap the surfaces of BC fibres. In this work, HAp/BC nanocomposites were studied using thermo-gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The TGA result suggested that HAp/BC nanocomposite, similar to natural bone in terms of composition, contained carbonate ions, in agreement with our previous Fourier transform infrared (FTIR) spectroscopy results. Thermal behaviour differences between BC and HAp/BC were observed by differential scanning calorimetry (DSC). The thermal stability of HAp/BC obtained from DSC showed an improvement when compared to that of a pure BC sample.

scholarly journals 3D Printed Silicone Meniscus Implants: Influence of the 3D Printing Process on Properties of Silicone Implants

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 2136
Author(s):  
Eric Luis ◽  
Houwen Matthew Pan ◽  
Anil Kumar Bastola ◽  
Ram Bajpai ◽  
Swee Leong Sing ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Weight Bearing ◽  
Thermo Gravimetric Analysis ◽  
Silicone Implants ◽  
Osteoarthritis Of The Knee ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Hydrogel Scaffolds ◽  
Custom Made ◽  
3D Printed

Osteoarthritis of the knee with meniscal pathologies is a severe meniscal pathology suffered by the aging population worldwide. However, conventional meniscal substitutes are not 3D-printable and lack the customizability of 3D printed implants and are not mechanically robust enough for human implantation. Similarly, 3D printed hydrogel scaffolds suffer from drawbacks of being mechanically weak and as a result patients are unable to execute immediate post-surgical weight-bearing ambulation and rehabilitation. To solve this problem, we have developed a 3D silicone meniscus implant which is (1) cytocompatible, (2) resistant to cyclic loading and mechanically similar to native meniscus, and (3) directly 3D printable. The main focus of this study is to determine whether the purity, composition, structure, dimensions and mechanical properties of silicone implants are affected by the use of a custom-made in-house 3D-printer. We have used the phosphate buffer saline (PBS) absorption test, Fourier transform infrared (FTIR) spectroscopy, surface profilometry, thermo-gravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM) to effectively assess and compare material properties between molded and 3D printed silicone samples.

The Research for the Properties of the Outlast/Viscose Blended Yarns

2014 ◽  
Vol 633-634 ◽  
pp. 464-467
Author(s):  
Rui Peng Jin ◽  
Zi Min Jin ◽  
Xue Qin Wang ◽  
Yu Xiu Yan ◽  
Jian Wei Tao
Keyword(s):  
Thermal Stability ◽  
Differential Scanning Calorimetry ◽  
Elastic Property ◽  
Thermo Gravimetric Analysis ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Thermo Gravimetric ◽  
Blended Yarn ◽  
Environment Temperature ◽  
Comfort Property

Outlast fiber is a kind of thermostat fiber that could absorb and release heat according to the changed environment temperature. It has been widely used in thermostat textiles. The outlast/viscose blended yarn we researched in this paper will be used in apparel fabric. As the demand in durability and comfort property of apparel fabric, we characterized the yarn by regain, tensile and damage properties, elastic property, differential scanning calorimetry (DSC) and thermo gravimetric analysis (TGA). The experiment results show that the outlast/viscose blended yarns have good hydroscopicity, elastic property, temperature adjusting performance and thermal stability.

The Effect of Bacterial Cellulose on the Mechanical and Thermal Expansion Properties of Kenaf/Polylactic Acid Composites

2011 ◽  
Vol 117-119 ◽  
pp. 1343-1351 ◽  
Author(s):  
Prakit Sukyai ◽  
Klana Rong Sriroth ◽  
Byoung Ho Lee ◽  
Joong Kim Hyun
Keyword(s):  
Thermal Stability ◽  
Bacterial Cellulose ◽  
Storage Modulus ◽  
Loss Modulus ◽  
Thermo Gravimetric Analysis ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Fiber Volume ◽  
Nano Cellulose ◽  
Electron Microscopes

The reinforcement of PLA matrix with natural fibers aims to generate the sustainable biocomposites. Kenaf fiber (KF) and bacterial cellulose (BC) were employed to reinforce and diminish the usage of PLA matrix. Particularly, BC is nano-cellulose which was anticipated to increased interfacial area and therefore low volume fractions of additives. That was consequently to attain mechanical property improvement. Thus, the incorporation of KF and BC reinforced PLA composites was investigated. The extrusion method was utilized and materials were mixed outside prior to adding. The specimens were examined mechanical testing, Dynamic Mechanical Analysis (DMA), Differential Scanning Calorimetry (DSC), Thermo Gravimetric Analysis (TGA) and Scanning Electron Microscopes (SEM). The mechanical study revealed that the increment of elastic modulus increased concomitantly with the augmentation of KF content. Interestingly, PLA/KF/BC sample at ratio of 60/39/1 wt.% was efficiently to maintain tensile and flexural strength comparing to 50% reduction of without BC sample with equal fiber volume. Therefore, it could recognize that mechanical properties was improved by using low amount of nano-cellulose. This would be a high aspect ratio of BC that capable to connect between PLA matrix and KF which enhanced a large contact surface and therefore excellent coherence. The temperature dependence of storage, loss and tan delta was determined by DMA. A decrease of storage modulus was consistent with increasing of temperature, result from softening of the composites. Loss modulus was increased approximately at Tg which related to storage modulus cause. In addition, the tan delta peaks of PLA and composites were around 60°C and it did not significantly shift when emerged of fiber. DSC of both composites indicated an influence of fiber on the crystallization and enthalpy. On the other hand, glass transition and melting temperature did not significantly affect. The composites exhibited a small reduction of thermal stability when examined by TGA analysis. Notwithstanding, BC showed an improvement of thermal stability of PLA/KF/BC sample at 40 wt.% total fiber content. The linkage of BC between PLA matrix and KF was monitored by SEM.

Probing Water Mobility in Human Dentine with Neutron Spectroscopy

2018 ◽  
Vol 97 (9) ◽  
pp. 1017-1022 ◽  
Author(s):  
A.K. Lauritsen ◽  
J.E.M. Pereira ◽  
F. Juranyi ◽  
H.N. Bordallo ◽  
L. Larsen ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Differential Scanning Calorimetry ◽  
Bound Water ◽  
Organic Content ◽  
Hydroxyl Groups ◽  
Neutron Spectroscopy ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Proton Mobility ◽  
Human Dentine

The aim of this study was to investigate hydrogen mobility within innate and demineralized human dentine. Dentine sections from extracted human molars, demineralized or not, were analyzed by combining neutron spectroscopy with thermal analysis. For the thermal analysis of the samples, differential scanning calorimetry and thermal gravimetric analysis, coupled with Fourier transform infrared spectroscopy, were performed. The hydrogen dynamics of water, collagen, and hydroxyl groups present in the samples were investigated via neutron spectroscopy. From the mass loss observed from the thermogravimetric analysis curves up to 600 °C, the same amount of organic content is identified in the samples. From the differential scanning calorimetry curves, a higher change in enthalpy associated with the denaturation of collagen is registered in the demineralized dentine; that is, a structural change occurs in the collagen subsequent to demineralization. Since the intensity measured by neutron spectroscopy is dominated by the signal from hydrogen, in our samples—coming mostly from the bulk-like and loosely bound water as well as from the collagen itself—higher proton mobility within the demineralized dentine was detected when compared with innate dentine. In the demineralized dentine, this proton mobility amounts to 80%, while the remaining hydrogen accounts for a combination of 1) structural hydroxyls, as a result of the incomplete dissolution of the mineral phase by acid etching, and 2) hydrogen tightly bound in the collagen structure. By combining neutron spectroscopy with the calorimetry data, our findings support the idea that hydroxyapatite protects the collagen in innate dentine. Demineralized dentine, however, acts as a sponge where free bulk-like water is trapped.

Hydrodeoxygenation of stearic acid for the production of “green” diesel

2014 ◽  
Vol 3 (6) ◽  
Author(s):  
Antonina A. Stepacheva ◽  
Linda Zh. Nikoshvili ◽  
Esther M. Sulman ◽  
Valentina G. Matveeva
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Photoelectron Spectroscopy ◽  
Hypercrosslinked Polystyrene ◽  
Biodiesel Production ◽  
Scanning Calorimetry ◽  
Green Diesel ◽  
X Ray ◽  
Transmission Electron

AbstractThe current work is devoted to the second-generation biodiesel production via fatty acids catalytic hydrodeoxygenation (HDO). Pd-containing catalysts based on polymeric matrix of hypercrosslinked polystyrene (HPS) with different metal loading were investigated in the process. The catalysts were characterized by low-temperature nitrogen physisorption, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The selectivity of the process (regarding to

scholarly journals Influence of different functionalization methods of multi-walled carbon nanotubes on the properties of poly(L-lactide) based nanocomposites

2019 ◽  
Vol 73 (3) ◽  
pp. 183-196 ◽  
Author(s):  
Nevena Vukic ◽  
Ivan Ristic ◽  
Milena Marinovic-Cincovic ◽  
Radmila Radicevic ◽  
Branka Pilic ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Thermo Gravimetric Analysis ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Transmission Electron ◽  
Multi Walled Carbon Nanotubes ◽  
Ft Ir ◽  
Walled Carbon Nanotubes ◽  
Functionalized Mwcnts

This paper presents influence of the type of carbon nanotube functionalization on properties of poly(L-lactide) (PLLA) based nanocomposite materials. For this purpose surface modifications of multi-walled carbon nanotubes (MWCNTs) were performed by chemical and irradiation techniques, while thermo gravimetric analysis, UV-Visible and Fourier-transform infrared (FT-IR) spectroscopies confirmed successful covalent functionalization. Series of PLLA bionanocom-posites with different contents of functionalized MWCNTs (0.7; 1.6; 2.1 wt%), were synthesized via ring-opening solution polymerisation of L-lactide. FT-IR analysis confirmed that grafting of L-lactide, under controlled condition, is possible to perform starting from the surface of functionalized MWCNTs. From differential scanning calorimetry results it was concluded that even low contents of chemically and irradiation functionalized MWCNTs had a significant effect on thermal properties of the prepared nanocomposites, raising the values of melting and glass transition temperatures. Thermogravimetric analysis (TGA) has shown that the degradation onset temperature for composites with chemically functionalized MWCNTs, was much higher than that for the neat poly(L-lactide) sample and composites with irradiation functionalized MWCNTs. Morphology studies by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) indicated that poly(L-lactide) covered surfaces and separated functionalized MWCNTs. Good dispersion of carbon nanotubes in polymer matrix enabled conductivity of synthesized materials, as determined by conductivity tests.

scholarly journals Enhancement of Antioxidant and Hydrophobic Properties of Alginate via Aromatic Derivatization: Preparation, Characterization, and Evaluation

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2575
Author(s):  
Smaher M. Elbayomi ◽  
Haili Wang ◽  
Tamer M. Tamer ◽  
Yezi You
Keyword(s):  
Radical Scavenging Activity ◽  
Radical Scavenging ◽  
Hydroxyl Group ◽  
Hydroxyl Groups ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Benzoyl Group ◽  
Antioxidant Evaluation ◽  
Thermo Stability

The preparation of bioactive polymeric molecules requires the attention of scientists as it has a potential function in biomedical applications. In the current study, functional substitution of alginate with a benzoyl group was prepared via coupling its hydroxyl group with benzoyl chloride. Fourier transform infrared spectroscopy indicated the characteristic peaks of aromatic C=C in alginate derivative at 1431 cm−1. HNMR analysis demonstrated the aromatic protons at 7.5 ppm assigned to benzoyl groups attached to alginate hydroxyl groups. Wetting analysis showed a decrease in hydrophilicity in the new alginate derivative. Differential scanning calorimetry and thermal gravimetric analysis showed that the designed aromatic alginate derivative demonstrated higher thermo-stability than alginates. The aromatic alginate derivative displayed high anti-inflammatory properties compared to alginate. Finally, the in vitro antioxidant evaluation of the aromatic alginate derivative showed a significant increase in free radical scavenging activity compared to neat alginate against DPPH (2,2-diphenyll-picrylhydrazyl) and ABTS free radicals. The obtained results proposed that the new alginate derivative could be employed for gene and drug delivery applications.

scholarly journals Biocomposites of Bio-Polyethylene Reinforced with a Hydrothermal-Alkaline Sugarcane Bagasse Pulp and Coupled with a Bio-Based Compatibilizer

Molecules ◽  
2020 ◽  
Vol 25 (9) ◽  
pp. 2158
Author(s):  
Nanci Vanesa Ehman ◽  
Diana Ita-Nagy ◽  
Fernando Esteban Felissia ◽  
María Evangelina Vallejos ◽  
Isabel Quispe ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Water Absorption ◽  
Sugarcane Bagasse ◽  
Thermo Gravimetric Analysis ◽  
Decomposition Temperature ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Cradle To Gate ◽  
Bagasse Pulp

Bio-polyethylene (BioPE, derived from sugarcane), sugarcane bagasse pulp, and two compatibilizers (fossil and bio-based), were used to manufacture biocomposite filaments for 3D printing. Biocomposite filaments were manufactured and characterized in detail, including measurement of water absorption, mechanical properties, thermal stability and decomposition temperature (thermo-gravimetric analysis (TGA)). Differential scanning calorimetry (DSC) was performed to measure the glass transition temperature (Tg). Scanning electron microscopy (SEM) was applied to assess the fracture area of the filaments after mechanical testing. Increases of up to 10% in water absorption were measured for the samples with 40 wt% fibers and the fossil compatibilizer. The mechanical properties were improved by increasing the fraction of bagasse fibers from 0% to 20% and 40%. The suitability of the biocomposite filaments was tested for 3D printing, and some shapes were printed as demonstrators. Importantly, in a cradle-to-gate life cycle analysis of the biocomposites, we demonstrated that replacing fossil compatibilizer with a bio-based compatibilizer contributes to a reduction in CO2-eq emissions, and an increase in CO2 capture, achieving a CO2-eq storage of 2.12 kg CO2 eq/kg for the biocomposite containing 40% bagasse fibers and 6% bio-based compatibilizer.

Preparation and Characterization of Ultrafine Monodisperse Iron Oxide Nanoparticles by Solvothermal Method

2015 ◽  
Vol 748 ◽  
pp. 93-96
Author(s):  
Cheng Mei Liu ◽  
Yu Xia Zhao ◽  
Jin Dong ◽  
Lu Hai Li ◽  
Yen Wei ◽  
...  
Keyword(s):  
Iron Oxide ◽  
Iron Oxide Nanoparticles ◽  
Solvothermal Method ◽  
Physical Property Measurement System ◽  
Thermo Gravimetric Analysis ◽  
Physical Property ◽  
Oxide Nanoparticles ◽  
Gravimetric Analysis ◽  
Transmission Electron ◽  
Different Diameters

Using iron-oleate complex as a precursor, oleic acid as a stabilizer and 1-octadecene as a reductant, uniform-sized and highly monodisperse iron oxide nanoparitcles with different diameters were successfully synthesized via solvothermal method by changing reaction time. Transmission electron microscope (TEM), thermo-gravimetric analysis (TGA), fourier transform infrared spectroscopy (FT-IR), physical property measurement system (PPMS) and dynamic light scattering (DLS) was used to characterize obtained iron oxide nanoparticles. These results indicated that iron oxide nanoparitcles with the diameter ranging from 4 to 8 nm can be controllably synthesized.

scholarly journals Enhanced Photocatalytic Activity of Cu2O Cabbage/RGO Nanocomposites under Visible Light Irradiation

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1712
Author(s):  
Appusamy Muthukrishnaraj ◽  
Salma Ahmed Al-Zahrani ◽  
Ahmed Al Otaibi ◽  
Semmedu Selvaraj Kalaivani ◽  
Ayyar Manikandan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thermo Gravimetric Analysis ◽  
Visible Region ◽  
Catalytic Performance ◽  
Precipitation Method ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Dye Pollutants ◽  
Transmission Electron

Towards the utilization of Cu2O nanomaterial for the degradation of industrial dye pollutants such as methylene blue and methyl orange, the graphene-incorporated Cu2O nanocomposites (GCC) were developed via a precipitation method. Using Hummers method, the grapheme oxide (GO) was initially synthesized. The varying weight percentages (1–4 wt %) of GO was incorporated along with the precipitation of Cu2O catalyst. Various characterization techniques such as Fourier-transform infra-red (FT-IR), X-ray diffraction (XRD), UV–visible diffused reflectance (UV-DRS), Raman spectroscopy, thermo gravimetric analysis (TGA), energy-dispersive X-ray analysis (EDX), and electro chemical impedance (EIS) were followed for characterization. The cabbage-like morphology of the developed Cu2O and its composites were ascertained from field-emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HR-TEM). In addition, the growth mechanism was also proposed. The results infer that 2 wt % GO-incorporated Cu2O composites shows the highest value of degradation efficiency (97.9% and 96.1%) for MB and MO at 160 and 220 min, respectively. Further, its catalytic performance over visible region (red shift) was also enhanced to an appreciable extent, when compared with that of other samples.

Sign in / Sign up

Export Citation Format

Share Document