Soft magnetorheological elastomers as new actuators for valves

2012 ◽  
Vol 23 (9) ◽  
pp. 989-994 ◽  
Author(s):  
Holger Böse ◽  
Raman Rabindranath ◽  
Johannes Ehrlich
Keyword(s):  
Magnetic Field ◽  
Magnetic Particles ◽  
Air Flow ◽  
Inhomogeneous Magnetic Field ◽  
Magnetorheological Elastomer ◽  
Magnetorheological Elastomers ◽  
Type Device ◽  
New Type ◽  
Flow Through ◽  
The Magnetic Field

The actuation behavior of soft silicone-based magnetorheological elastomers in magnetic fields of variable strength was investigated. An inhomogeneous magnetic field gives rise to a reversible actuation effect, which is the result of the competition between magnetic and elastic forces in the material. Magnetorheological elastomers are capable of performing more pronounced deformations than known rigid actuator materials. In this article, the actuation behavior of magnetorheological elastomer ring-shaped bodies in a valve-type device for the control of an air flow is demonstrated. For this purpose, magnetorheological elastomer rings with different Shore hardness were prepared and used in the valve. In addition to the common isotropic magnetorheological elastomer samples, rings with an anisotropic arrangement of the magnetic particles were also prepared. The actuation of these anisotropic magnetorheological elastomers was compared with that of the isotropic samples. Based on simulations, the inhomogeneity of the magnetic field at the magnetorheological elastomer material which is required for the actuation could be strongly affected by the shape in the design of the magnetic yoke. In this study, the closing characteristics of the valve with different yoke shapes and magnetorheological elastomer materials were evaluated by measuring the dependence of the air flow rate on the magnetic field strength. It is demonstrated that the air flow through the valve can be controlled by the current in the field-generating coil, which yields the base for a new type of magnetic valve.

MONITORING INTERPARTICLE DISTANCE IN MAGNETORHEOLOGICAL COMPOSITES

2007 ◽  
Vol 21 (28n29) ◽  
pp. 4868-4874
Author(s):  
G. BOSSIS ◽  
E. COQUELLE ◽  
C. NOEL ◽  
F. GIULIERI ◽  
A. M. CHAZE
Keyword(s):  
Magnetic Field ◽  
Liquid Crystal ◽  
Energy Dissipation ◽  
Viscoelastic Properties ◽  
Magnetic Particles ◽  
Interparticle Distance ◽  
Magnetorheological Elastomer ◽  
Magnetorheological Elastomers ◽  
Magnetic Spheres ◽  
The Creation

We describe two different systems, the first one based on a magnetorheological elastomer and the second one on magnetic particles inside a liquid crystal. In both system we manage to have chain structures with particles that are not in contact. The effect of the gap between particles on the viscoelastic properties are studied. We show in particular how in magnetorheological elastomers, the energy dissipation is closely related to the creation and the motion of cavities in the gap between the particles. In liquid crystal chaining of particles can occur without applying a magnetic field. This happens if the anchoring of liquid crystal on the surface of the particles is homeotropic. We demonstrate how the combination of elastic defects and of a magnetic field allow to obtain microscopic springs made of a pair of magnetic spheres.

Sensing Behavior of Magnetorheological Elastomers

2009 ◽  
Vol 131 (9) ◽  
Author(s):  
Xiaojie Wang ◽  
Faramarz Gordaninejad ◽  
Mert Calgar ◽  
Yanming Liu ◽  
Joko Sutrisno ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Electrical Properties ◽  
Magnetic Particles ◽  
External Stimulus ◽  
Magnetorheological Elastomer ◽  
Polymer Medium ◽  
Mechanical Loads ◽  
Magnetorheological Elastomers ◽  
Impedance Response ◽  
Ferromagnetic Particles

A magnetorheological elastomer (MRE) is comprised of ferromagnetic particles aligned in a polymer medium by exposure to a magnetic field. The structures of the magnetic particles within elastomers are very sensitive to the external stimulus of either mechanical force or magnetic field, which result in multiresponse behaviors in a MRE. In this study, the sensing properties of MREs are investigated through experimentally characterizing the electrical properties of MRE materials and their interfaces with external stimulus (magnetic field or stress/strain). A phenomenological model is proposed to understand the impedance response of MREs under mechanical loads and magnetic fields. Results show that MRE samples exhibit significant changes in measured values of impedance and resistance in response to compressive deformation, as well as the applied magnetic field.

A mechanical characterization of electroconductive magnetorheological elastomer and semi-analytical modeling of magnetic force

2019 ◽  
Vol 33 (25) ◽  
pp. 1950290
Author(s):  
Salah Aguib ◽  
Abdelkader Nour ◽  
Toufik Djedid
Keyword(s):  
Magnetic Field ◽  
Magnetic Force ◽  
Magnetic Field Intensity ◽  
Experimental Characterization ◽  
Iron Particles ◽  
Magnetorheological Elastomer ◽  
Magnetorheological Elastomers ◽  
Global Industry ◽  
The Magnetic Field

Materials with novel properties and compounds of intelligent material combinations are a key to innovation in various successful sectors of the global industry as well as for its export. Magnetorheological elastomer materials have interesting physical properties; most of these properties are modified and adapted under the influence of external parameters such as the magnetic field. In this work, an experimental characterization of the magnetorheological elastomers (MRE) loaded with 20% of the iron particles was made. The results showed that the properties of these materials can be modified very selectively and reversibly under the influence of magnetic field, where the stiffness of the material varies depending on the magnetic field intensity that influences the attractive force between iron particles.

Monte Carlo calculation of the energy parameters and spatial distribution of the cathodic arc ions while passing through the macro-particles filters

2018 ◽  
Vol 1 (1) ◽  
pp. 30-34 ◽  
Author(s):  
Alexey Chernogor ◽  
Igor Blinkov ◽  
Alexey Volkhonskiy
Keyword(s):  
Magnetic Field ◽  
Mass Transfer ◽  
Monte Carlo ◽  
Monte Carlo Calculation ◽  
Inhomogeneous Magnetic Field ◽  
Flow Energy ◽  
Wide Range ◽  
Field Concentrator ◽  
Cathodic Arc ◽  
The Magnetic Field

The flow, energy distribution and concentrations profiles of Ti ions in cathodic arc are studied by test particle Monte Carlo simulations with considering the mass transfer through the macro-particles filters with inhomogeneous magnetic field. The loss of ions due to their deposition on filter walls was calculated as a function of electric current and number of turns in the coil. The magnetic field concentrator that arises in the bending region of the filters leads to increase the loss of the ions component of cathodic arc. The ions loss up to 80 % of their energy resulted by the paired elastic collisions which correspond to the experimental results. The ion fluxes arriving at the surface of the substrates during planetary rotating of them opposite the evaporators mounted to each other at an angle of 120° characterized by the wide range of mutual overlapping.

Magnetorheological fluid based on amorphous Fe-Si-B alloy magnetic particles

2021 ◽  
pp. 1045389X2110643
Author(s):  
Chuncheng Yang ◽  
Zhong Liu ◽  
Xiangyu Pei ◽  
Cuiling Jin ◽  
Mengchun Yu ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Field Strength ◽  
Rheological Property ◽  
Magnetic Particles ◽  
Annealing Treatment ◽  
Magnetorheological Fluid ◽  
The Stability ◽  
The Magnetic Field ◽  
Amorphous Particle ◽  
Better Than

Magnetorheological fluids (MRFs) based on amorphous Fe-Si-B alloy magnetic particles were prepared. The influence of annealing treatment on stability and rheological property of MRFs was investigated. The saturation magnetization ( Ms) of amorphous Fe-Si-B particles after annealing at 550°C is 131.5 emu/g, which is higher than that of amorphous Fe-Si-B particles without annealing. Moreover, the stability of MRF with annealed amorphous Fe-Si-B particles is better than that of MRF without annealed amorphous Fe-Si-B particles. Stearic acid at 3 wt% was added to the MRF2 to enhance the fluid stability to greater than 90%. In addition, the rheological properties demonstrate that the prepared amorphous particle MRF shows relatively strong magnetic responsiveness, especially when the magnetic field strength reaches 365 kA/m. As the magnetic field intensified, the yield stress increased dramatically and followed the Herschel-Bulkley model.

scholarly journals Radio Emission Model of a 'Typical' Pulsar

1987 ◽  
Vol 40 (6) ◽  
pp. 755 ◽  
Author(s):  
AZ Kazbegi ◽  
GZ Machabeli ◽  
G Melikidze
Keyword(s):  
Magnetic Field ◽  
Electromagnetic Waves ◽  
Emission Model ◽  
Radio Waves ◽  
Resonance Case ◽  
Pulsar Magnetosphere ◽  
Pulsar Emission ◽  
Dipole Magnetic Field ◽  
New Type ◽  
The Magnetic Field

The generation of radio waves in the plasma of the pulsar magnetosphere is considered taking into account the inhomogeneity of the dipole magnetic field. It is shown that the growth rate of the instability of the electromagnetic waves calculated in the non-resonance case turns out to be of the order of 1/ TO (where TO is the time of plasma escape from the light cylinder). However, the generation of electromagnetic waves from a new type Cherenkov resonance is possible, occurring when the particles have transverse velocities caused by the drift due to the inhomogeneity of the magnetic field. Estimates show that the development of this type of instability is possible only for pulsars with ages which exceed 104 yr. We make an attempt to explain some peculiarities of 'typical' pulsar emission on the basis of the model developed.

scholarly journals Modified boundary integral method for pressure driven MHD duct flow

1989 ◽  
Vol 12 (1) ◽  
pp. 159-174
Author(s):  
B. D. Aggarwala ◽  
P. D. Ariel
Keyword(s):  
Magnetic Field ◽  
Integral Method ◽  
Boundary Integral ◽  
Boundary Integral Method ◽  
Duct Flow ◽  
Rectangular Duct ◽  
Computationally Efficient ◽  
Electrically Conducting ◽  
Flow Through ◽  
The Magnetic Field

In this paper, we investigate the flow of a viscous, Incompressible, electrically conducting fluid through a rectangular duct in the presence of a magnetic field, when one of the boundaries perpedicular to the magnetic field is partly conducting and partly Insulating, by a modified Boundary Integral Method.Three problems are considered (i) flow through an infinite channel, (ii) flow through a rectangular duct when the conducting part is symmetrically situated, and (iii) flow through a rectangular duct when the conducting part is arbltrarily positioned.Such problems have been studied before by asymptotic means for large values of M, the Hartmann number. Hoverer, the present modification of the Boundary Integral Method renders the problem computationally efficient and provides a reliable numerical solution for all values of M. For large M, our coputation time decreases significantly.

Sign in / Sign up

Export Citation Format

Share Document