MONITORING INTERPARTICLE DISTANCE IN MAGNETORHEOLOGICAL COMPOSITES

2007 ◽  
Vol 21 (28n29) ◽  
pp. 4868-4874
Author(s):  
G. BOSSIS ◽  
E. COQUELLE ◽  
C. NOEL ◽  
F. GIULIERI ◽  
A. M. CHAZE
Keyword(s):  
Magnetic Field ◽  
Liquid Crystal ◽  
Energy Dissipation ◽  
Viscoelastic Properties ◽  
Magnetic Particles ◽  
Interparticle Distance ◽  
Magnetorheological Elastomer ◽  
Magnetorheological Elastomers ◽  
Magnetic Spheres ◽  
The Creation

We describe two different systems, the first one based on a magnetorheological elastomer and the second one on magnetic particles inside a liquid crystal. In both system we manage to have chain structures with particles that are not in contact. The effect of the gap between particles on the viscoelastic properties are studied. We show in particular how in magnetorheological elastomers, the energy dissipation is closely related to the creation and the motion of cavities in the gap between the particles. In liquid crystal chaining of particles can occur without applying a magnetic field. This happens if the anchoring of liquid crystal on the surface of the particles is homeotropic. We demonstrate how the combination of elastic defects and of a magnetic field allow to obtain microscopic springs made of a pair of magnetic spheres.

Sensing Behavior of Magnetorheological Elastomers

2009 ◽  
Vol 131 (9) ◽  
Author(s):  
Xiaojie Wang ◽  
Faramarz Gordaninejad ◽  
Mert Calgar ◽  
Yanming Liu ◽  
Joko Sutrisno ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Electrical Properties ◽  
Magnetic Particles ◽  
External Stimulus ◽  
Magnetorheological Elastomer ◽  
Polymer Medium ◽  
Mechanical Loads ◽  
Magnetorheological Elastomers ◽  
Impedance Response ◽  
Ferromagnetic Particles

A magnetorheological elastomer (MRE) is comprised of ferromagnetic particles aligned in a polymer medium by exposure to a magnetic field. The structures of the magnetic particles within elastomers are very sensitive to the external stimulus of either mechanical force or magnetic field, which result in multiresponse behaviors in a MRE. In this study, the sensing properties of MREs are investigated through experimentally characterizing the electrical properties of MRE materials and their interfaces with external stimulus (magnetic field or stress/strain). A phenomenological model is proposed to understand the impedance response of MREs under mechanical loads and magnetic fields. Results show that MRE samples exhibit significant changes in measured values of impedance and resistance in response to compressive deformation, as well as the applied magnetic field.

Soft magnetorheological elastomers as new actuators for valves

2012 ◽  
Vol 23 (9) ◽  
pp. 989-994 ◽  
Author(s):  
Holger Böse ◽  
Raman Rabindranath ◽  
Johannes Ehrlich
Keyword(s):  
Magnetic Field ◽  
Magnetic Particles ◽  
Air Flow ◽  
Inhomogeneous Magnetic Field ◽  
Magnetorheological Elastomer ◽  
Magnetorheological Elastomers ◽  
Type Device ◽  
New Type ◽  
Flow Through ◽  
The Magnetic Field

The actuation behavior of soft silicone-based magnetorheological elastomers in magnetic fields of variable strength was investigated. An inhomogeneous magnetic field gives rise to a reversible actuation effect, which is the result of the competition between magnetic and elastic forces in the material. Magnetorheological elastomers are capable of performing more pronounced deformations than known rigid actuator materials. In this article, the actuation behavior of magnetorheological elastomer ring-shaped bodies in a valve-type device for the control of an air flow is demonstrated. For this purpose, magnetorheological elastomer rings with different Shore hardness were prepared and used in the valve. In addition to the common isotropic magnetorheological elastomer samples, rings with an anisotropic arrangement of the magnetic particles were also prepared. The actuation of these anisotropic magnetorheological elastomers was compared with that of the isotropic samples. Based on simulations, the inhomogeneity of the magnetic field at the magnetorheological elastomer material which is required for the actuation could be strongly affected by the shape in the design of the magnetic yoke. In this study, the closing characteristics of the valve with different yoke shapes and magnetorheological elastomer materials were evaluated by measuring the dependence of the air flow rate on the magnetic field strength. It is demonstrated that the air flow through the valve can be controlled by the current in the field-generating coil, which yields the base for a new type of magnetic valve.

scholarly journals Magnetorheological Elastomers: Fabrication, Characteristics, and Applications

Materials ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 4597
Author(s):  
Sung Kang ◽  
Kisuk Choi ◽  
Jae-Do Nam ◽  
Hyoung Choi
Keyword(s):  
Magnetic Field ◽  
Electromagnetic Wave ◽  
Viscoelastic Properties ◽  
Magnetic Particles ◽  
Advanced Materials ◽  
Vibration Absorber ◽  
Solid Base ◽  
Magnetorheological Elastomers ◽  
Electromagnetic Wave Absorption ◽  
Elastomeric Materials

Magnetorheological (MR) elastomers become one of the most powerful smart and advanced materials that can be tuned reversibly, finely, and quickly in terms of their mechanical and viscoelastic properties by an input magnetic field. They are composite materials in which magnetizable particles are dispersed in solid base elastomers. Their distinctive behaviors are relying on the type and size of dispersed magnetic particles, the type of elastomer matrix, and the type of non-magnetic fillers such as plasticizer, carbon black, and crosslink agent. With these controllable characteristics, they can be applied to various applications such as vibration absorber, isolator, magnetoresistor, and electromagnetic wave absorption. This review provides a summary of the fabrication, properties, and applications of MR elastomers made of various elastomeric materials.

VISCOELASTIC PROPERTIES OF SILICONE-BASED MAGNETORHEOLOGICAL ELASTOMERS

2007 ◽  
Vol 21 (28n29) ◽  
pp. 4790-4797 ◽  
Author(s):  
HOLGER BÖSE
Keyword(s):  
Magnetic Field ◽  
Smart Materials ◽  
Viscoelastic Properties ◽  
Magnetic Particles ◽  
Relative Increase ◽  
Matrix Composites ◽  
Mechanical Stiffness ◽  
Storage And Loss Moduli ◽  
Order Of Magnitude ◽  
Reported Data

Magnetorheological (MR) elastomers are composite materials consisting of magnetic particles in elastomer matrices, whose mechanical properties can be influenced by applying a magnetic field. Main parameters which determine the behavior of these smart materials are the concentration of the magnetic particles and the mechanical stiffness of the elastomer matrix. The viscoelastic properties of silicone-based MR elastomers are outlined in terms of their storage and loss moduli. The mechanical behavior of the material is also influenced by a magnetic field during the curing of the elastomer matrix, which leads to materials with anisotropic microstructures. The storage modulus of soft elastomer matrix composites can be increased in the presence of a magnetic field by significantly more than one order of magnitude or several hundreds of kPa. The relative increase exceeds that of all previously reported data. A shape memory effect, i. e. the deformation of an MR elastomer in a magnetic field and its return to original shape on cessasion of the magnetic field, is described.

Shock attenuation mechanisms of magnetorheological elastomers absorbers: A theoretical analysis

2016 ◽  
Vol 51 (5) ◽  
pp. 721-730 ◽  
Author(s):  
Dingxin Leng ◽  
Xiaojie Wang ◽  
Lingyu Sun ◽  
Faramarz Gordaninejad
Keyword(s):  
Magnetic Field ◽  
Energy Dissipation ◽  
Variable Stiffness ◽  
Rubber Matrix ◽  
Interfacial Friction ◽  
Response Force ◽  
Shock Attenuation ◽  
Interfacial Bond ◽  
Magnetorheological Elastomers ◽  
Shock Absorbers

To predict the dynamic response of shock absorbers based on magnetorheological elastomers and investigate the contributions of various possible energy dissipation mechanisms, a modified four-parameter model of magnetorheological elastomers was proposed, which includes the viscoelastic characteristics of rubber matrix, the variable stiffness and damping property, and the interfacial bond conditions of magnetorheological elastomers under the applied magnetic field. The constitutive equations of magnetorheological elastomers were derived and all parameters were identified based on a published literature. It is theoretically demonstrated that the maximum response force under an impulse input could be attenuated approximately 30% when the magnetic field with 0.57 T is applied. Using the proposed theoretical model, it is shown that the energy dissipation mechanisms mainly come from the interfacial friction between particles and matrix, and the increment on stiffness and dynamic viscosity of the rubber matrix provides reverse contributions to the shock mitigation, while the interfacial bond stiffness has little influence on the response force amplitude. Hence, when magnetorheological elastomers are utilized in shock absorbers, it is suggested to take advantage of the interfacial friction energy.

scholarly journals Experiments and Numerical Implementation of a Boundary Value Problem Involving a Magnetorheological Elastomer Layer Subjected to a Nonuniform Magnetic Field

2021 ◽  
Vol 88 (7) ◽  
Author(s):  
Charles Dorn ◽  
Laurence Bodelot ◽  
Kostas Danas
Keyword(s):  
Magnetic Field ◽  
Magnetic Fields ◽  
Boundary Value Problem ◽  
Magnetic Particles ◽  
Boundary Value ◽  
Energetic Efficiency ◽  
Iron Core ◽  
Isotropic Layer ◽  
Magnetorheological Elastomer ◽  
Electromagnetic Coil

Abstract This study investigates experimentally and numerically the response of a magnetorheological elastomer (MRE) layer placed atop an electromagnetic coil. The MRE layer is deflected upon application of a current in the coil, which creates highly nonuniform magnetic fields. Isotropic and transversely isotropic layers (i.e., containing chains of magnetic particles) are tested experimentally, and the isotropic layer exhibits the largest deflection. To enhance the energetic efficiency of the model device, an iron core is introduced inside the electromagnetic coil, thereby leading to an increase in the resulting magnetic field near the center of the MRE layer. In parallel, the boundary value problem —including the MRE layer, the coil, the core (if present) and the surrounding air—is modeled numerically. For this, a magneto-mechanical, vector potential-based variational formulation is implemented in a standard three-dimensional finite element model at finite strains. For the material description, a recently proposed analytical homogenization-guided model is used to analyze the MRE in the “coil-only” configuration. It is then employed to predict the response of the layer in the “coil plus core” configuration, thus circumventing the need for a separate material characterization procedure. The proposed numerical simulation strategy provides a deeper understanding of the underlying complexity of the magnetic fields and of their interaction with the MRE layer. This study also reveals the importance of modeling the entire setup for predicting the response of MRE materials and, as a result, constitutes a step toward designing more efficient MRE-based devices.

Anisotropic Silicone Rubber Based Magnetorheological Elastomer with Oil Silicone and Iron Microparticles

2012 ◽  
Vol 190 ◽  
pp. 645-648 ◽  
Author(s):  
I. Bica ◽  
Maria Balasoiu ◽  
A.I. Kuklin
Keyword(s):  
Magnetic Field ◽  
Elastic Properties ◽  
Silicone Rubber ◽  
Longitudinal Magnetic Field ◽  
Dipole Approximation ◽  
Continuous Linear ◽  
Magnetorheological Elastomer ◽  
Magnetorheological Elastomers ◽  
Young Module ◽  
Linear Body

Results on anisotropic magnetorheological elastomers magnetoelasticity are presented and discussed. In the dipole approximation, and considering the MRE as a continuous linear body, the effects of magnetic field on its main elastic properties (linear deformations and Young module) are investigated. Experimental evidences that the compression of the cylindrical bar is influenced by the intensity of the longitudinal magnetic field and the Young module of the MRE sample increases with the intensity H of the longitudinal magnetic field are obtained and the results discussed.

Folding Actuation and Locomotion of Novel Magneto-Active Elastomer (MAE) Composites

2013 ◽  
Author(s):  
Paris von Lockette ◽  
Robert Sheridan
Keyword(s):  
Magnetic Field ◽  
Barium Ferrite ◽  
Magnetic Particles ◽  
Flat Surface ◽  
Iron Particles ◽  
Soft Magnetic ◽  
Magnetorheological Elastomers ◽  
Vibration Attenuation ◽  
Magnetically Aligned ◽  
Mechanical Actuation

Magneto-active elastomers (also called magnetorheological elastomers) are most often used in vibration attenuation application due to their ability to increase in shear modulus under a magnetic field. These shear-stiffening materials are generally comprised of soft-magnetic iron particles embedded in a rubbery elastomer matrix. More recently researchers have begun fabricating MAEs using hard-magnetic particles such as barium ferrite. Under the influence of uniform magnetic fields these hard-magnetic MAEs have shown large deformation bending behaviors resulting from magnetic torques acting on the distributed particles and consequently highlight their ability for use as remotely powered actuators. Using the magnetic-torque-driven hard-magnetic MAE materials and an unfilled silicone elastomer, this work develops novel composite geometries for actuation and locomotion. MAE materials are fabricated using 30% v/v 325 mesh barium ferrite particles in Dow Corning HS II silicone elastomers. MAE materials are cured in a 2T magnetic field to create magnetically aligned (anisotropic) materials as confirmed by vibrating sample magnetometry (VSM). Gelest optical encapsulant is used as the uniflled elastomer material. Mechanical actuation tests of cantilevers in bending and of accordion folding structures highlight the ability of the material to perform work in moderate, uniform fields of μ0H = 150 mT. Computational simulations are developed for comparison. Folding structures are also investigated as a means to produce untethered locomotion across a flat surface when subjected to an alternating field similar to scratch drive actuators; geometries investigated show promising results.

Viscoelastic Responses of Silicone-Rubber-Based Magnetorheological Elastomers Under Compressive and Shear Loadings

2013 ◽  
Vol 135 (2) ◽  
Author(s):  
Rui Li ◽  
L. Z. Sun
Keyword(s):  
Magnetic Field ◽  
Silicone Rubber ◽  
Viscoelastic Properties ◽  
Mechanical Performance ◽  
Dynamic Stiffness ◽  
Zero Magnetic Field ◽  
Dynamic Strain ◽  
Loading Frequency ◽  
Magnetorheological Elastomers ◽  
Mr Effect

Magnetorheological elastomers (MREs) are adaptive composite materials in the sense that their mechanical properties are tailored by the applied magnetic field. In this paper we developed both isotropic and anisotropic silicone-rubber-based MREs. We examined the zero-magnetic-field dynamic stiffness and damping along with the magnetic field induced changes (the magnetorheological (MR) effect) for the viscoelastic properties of the MREs by conducting both compression and shear investigations. While the anisotropic MREs exhibited substantial magnetic-field-dependent viscoelastic properties at a medium magnetic field, the isotropic ones showed a negligible MR effect. The magnetic filler structure and concentration, loading frequency, and dynamic strain amplitude were all confirmed to play significant roles in the dynamic mechanical performance of the MREs.

Electrical Properties of Magneto-Rheological Elastomers

2008 ◽  
Author(s):  
Xiaojie Wang ◽  
Faramarz Gordaninejad ◽  
Mert Calgar ◽  
Yanming Liu ◽  
Joko Sutrisno ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Electrical Properties ◽  
Magnetic Particles ◽  
External Stimulus ◽  
Magnetorheological Elastomer ◽  
Polymer Medium ◽  
Impedance Response ◽  
Properties Of Materials ◽  
Magneto Rheological ◽  
Ferromagnetic Particles

A magnetorheological elastomer (MRE) is comprised of ferromagnetic particles aligned in a polymer medium by exposure to a magnetic field. The structures of the magnetic particles within elastomers are very sensitive to the external stimulus of either mechanical force or magnetic field, which result in multi-response behaviors in MRE. In this study, sensing properties of MREs through experimentally characterizing the electrical properties of materials and theirs interfaces with external stimulus (magnetic field or stress/strain) are investigated. A phenomenological model is proposed to model the impedance response of MREs. Results show that MRE samples exhibit significant changes in measured values of impedance and resistance in response to compressive deformation, as well as applied magnetic field.

Sign in / Sign up

Export Citation Format

Share Document