scholarly journals AUTORADIOGRAPHIC LOCALIZATION OF LIPID- AND WATER-SOLUBLE COMPOUNDS: A NEW APPROACH

1965 ◽  
Vol 13 (1) ◽  
pp. 38-43 ◽  
Author(s):  
KENNETH R. WILSKE ◽  
RUSSELL ROSS ◽  
Leslie E. Caldwell ◽  
Dawn E. Bockus
Keyword(s):  
Epoxy Resin ◽  
Tissue Section ◽  
Vapor Phase ◽  
Cellular Localization ◽  
Osmium Tetroxide ◽  
Water Soluble ◽  
Tissue Preparation ◽  
New Approach ◽  
The Media

An approach to the localization of isotopically labelled lipid-soluble and water-soluble substances by autoradiography is presented. Previous attempts to retain such substances in situ in tissues have often been unsuccessful due to diffusion in the media involved in tissue preparation; and at the interface between the emulsion and the tissue section. Rats were given estradiol-H3 and aspirin-H3 as representatives of lipid-soluble and partially water-soluble compounds. After removal, tissues were quick frozen, frozen-dried, fixed in the vapor phase with osmium tetroxide or paraformaldehyde and vacuum embedded in Epon. One-micron sections were coated with emulsion and subsequently developed. Discrete localization of isotope was seen in autoradiographs. Data is presented to demonstrate the marked solubility of these compounds in the media used for routine fixation and dehydration, in contrast to their insolubility in epoxy resin. These findings present an opportunity for the cellular localization of numerous compounds by autoradiography that heretofore has not been possible.

A rapid technique using epoxy resin Quetol 651 to prepare woody plant tissues for ultrastructural study

1988 ◽  
Vol 66 (4) ◽  
pp. 677-682 ◽  
Author(s):  
A. R. Abad ◽  
K. R. Cease ◽  
R. A. Blanchette
Keyword(s):  
Epoxy Resin ◽  
Woody Plant ◽  
Water Soluble ◽  
Plant Tissues ◽  
Ultrastructural Observation ◽  
Rapid Preparation ◽  
Low Viscosity ◽  
Transmission Electron ◽  
The Media ◽  
A New Technique

A new technique was evaluated for rapid preparation of woody plant tissues for transmission electron microscopy. A low-viscosity medium formulation was developed using a water-soluble epoxy resin, Quetol 651. No dehydrating solvents were needed during preparation. Samples from living trees and xylary tissues of sound and decayed wood were studied to assess the quality of the media and embedding techniques. Infiltration, preservation of ultrastructural detail, sectioning qualities, and staining of the wood samples were found to be very good. The technique provided a fast, reliable method for preparing wood samples for ultrastructural observation.

A Resorcinol-Formaldehyde Resin as an Embedding Material for Electron Microscopy of Membranes

1969 ◽  
Vol 27 ◽  
pp. 328-329 ◽  
Author(s):  
J. G. Robertson ◽  
D. F. Parsons
Keyword(s):  
Electron Microscopy ◽  
Osmium Tetroxide ◽  
Neutral Lipids ◽  
Lipid Extraction ◽  
Water Soluble ◽  
Formaldehyde Resin ◽  
Electron Microscope Autoradiography ◽  
Resorcinol Formaldehyde ◽  
Major Disadvantage ◽  
Cell Organization

The extraction of lipids from tissues during fixation and embedding for electron microscopy is widely recognized as a source of possible artifact, especially at the membrane level of cell organization. Lipid extraction is also a major disadvantage in electron microscope autoradiography of radioactive lipids, as in studies of the uptake of radioactive fatty acids by intestinal slices. Retention of lipids by fixation with osmium tetroxide is generally limited to glycolipids, phospholipids and highly unsaturated neutral lipids. Saturated neutral lipids and sterols tend to be easily extracted by organic dehydrating reagents prior to embedding. Retention of the more saturated lipids in embedded tissue might be achieved by developing new cross-linking reagents, by the use of highly water soluble embedding materials or by working at very low temperatures.

Functional Poly(p-Xylylene)s via Chemical Reduction of Poly(p-Phenylene Vinylene)s

2019 ◽  
Author(s):  
Ain Uddin ◽  
Weifan Sang ◽  
Yong Gao ◽  
Kyle Plunkett
Keyword(s):  
Film Formation ◽  
Chemical Reduction ◽  
Water Soluble ◽  
Phenylene Vinylene ◽  
Polymer Modification ◽  
Polymer Backbone ◽  
Crosslinking Process ◽  
Conducting Membranes ◽  
In Situ Crosslinking

The synthesis of poly(p-xylylene)s (PPXs) with sidechains containing alkyl bromide functionality, and their post-polymer modification, is described. The PPXs were prepared by a diimide hydrogenation of poly(p-phenylene vinylene)s (PPVs) that were originally synthesized by a Gilch polymerization. The polymer backbone reduction was carried out with hydrazine hydrate in toluene at 80 °C to provide polymers with the sidechain-containing bromide functionality intact. To demonstrate post-polymer modification of the sidechains, the resulting PPX polymers were modified with trimethylamine to form tetraalkylammonium ion functionality and were evaluated as anion conducting membranes. While PPX homopolymers containing tetralkylammonium ions were completely water soluble and not able to form valuable films, PPX copolymers containing mixed tetraalkylammonium ions and hydrophobic chains were capable of film formation and alkaline stability. In addition, an in situ crosslinking process that used N,N,N',N'-tetramethyl-1,6-hexanediamine during the tetraalkylammonium formation of brominated PPX polymers was also evaluated and gave reasonable films with conductivities of ~10 mS-cm-1.

Functional Poly(p-Xylylene)s via Chemical Reduction of Poly(p-Phenylene Vinylene)s

2019 ◽  
Author(s):  
Ain Uddin ◽  
Weifan Sang ◽  
Yong Gao ◽  
Kyle Plunkett
Keyword(s):  
Film Formation ◽  
Chemical Reduction ◽  
Water Soluble ◽  
Phenylene Vinylene ◽  
Polymer Modification ◽  
Polymer Backbone ◽  
Crosslinking Process ◽  
Conducting Membranes ◽  
In Situ Crosslinking

The synthesis of poly(p-xylylene)s (PPXs) with sidechains containing alkyl bromide functionality, and their post-polymer modification, is described. The PPXs were prepared by a diimide hydrogenation of poly(p-phenylene vinylene)s (PPVs) that were originally synthesized by a Gilch polymerization. The polymer backbone reduction was carried out with hydrazine hydrate in toluene at 80 °C to provide polymers with the sidechain-containing bromide functionality intact. To demonstrate post-polymer modification of the sidechains, the resulting PPX polymers were modified with trimethylamine to form tetraalkylammonium ion functionality and were evaluated as anion conducting membranes. While PPX homopolymers containing tetralkylammonium ions were completely water soluble and not able to form valuable films, PPX copolymers containing mixed tetraalkylammonium ions and hydrophobic chains were capable of film formation and alkaline stability. In addition, an in situ crosslinking process that used N,N,N',N'-tetramethyl-1,6-hexanediamine during the tetraalkylammonium formation of brominated PPX polymers was also evaluated and gave reasonable films with conductivities of ~10 mS-cm-1.

scholarly journals Synthesis of a sucrose dimer with enone tether; a study on its functionalization

2014 ◽  
Vol 10 ◽  
pp. 1246-1254 ◽  
Author(s):  
Zbigniew Pakulski ◽  
Norbert Gajda ◽  
Magdalena Jawiczuk ◽  
Jadwiga Frelek ◽  
Piotr Cmoch ◽  
...  
Keyword(s):  
Circular Dichroism ◽  
Double Bond ◽  
Carbonyl Group ◽  
Osmium Tetroxide ◽  
Cd Spectroscopy ◽  
Allylic Alcohol ◽  
Circular Dichroïsm

The reaction of appropriately functionalized sucrose phosphonate with sucrose aldehyde afforded a dimer composed of two sucrose units connected via their C6-positions (‘the glucose ends’). The carbonyl group in this product (enone) was stereoselectively reduced with zinc borohydride and the double bond (after protection of the allylic alcohol formed after reduction) was oxidized with osmium tetroxide to a diol. Absolute configurations of the allylic alcohol as well as the diol were determined by circular dichroism (CD) spectroscopy using the in situ dimolybdenum methodology.

scholarly journals Neuroimmune Response Mediated by Cytokines in Natural Scrapie after Chronic Dexamethasone Treatment

Biomolecules ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 204
Author(s):  
Isabel M. Guijarro ◽  
Moisés Garcés ◽  
Pol Andrés-Benito ◽  
Belén Marín ◽  
Alicia Otero ◽  
...  
Keyword(s):  
Prion Diseases ◽  
Global Approach ◽  
Profile Data ◽  
Dexamethasone Treatment ◽  
New Approach ◽  
Complex Interactions ◽  
Natural Scrapie ◽  
Anti Inflammatory

The actual role of prion protein-induced glial activation and subsequent cytokine secretion during prion diseases is still incompletely understood. The overall aim of this study is to assess the effect of an anti-inflammatory treatment with dexamethasone on different cytokines released by neuroglial cells that are potentially related to neuroinflammation in natural scrapie. This study emphasizes the complex interactions existent among several pleiotropic neuromodulator peptides and provides a global approach to clarify neuroinflammatory processes in prion diseases. Additionally, an impairment of communication between microglial and astroglial populations mediated by cytokines, mainly IL-1, is suggested. The main novelty of this study is that it is the first one assessing in situ neuroinflammatory activity in relation to chronic anti-inflammatory therapy, gaining relevance because it is based on a natural model. The cytokine profile data would suggest the activation of some neurotoxicity-associated route. Consequently, targeting such a pathway might be a new approach to modify the damaging effects of neuroinflammation.

scholarly journals A thin, deformable, high-performance supercapacitor implant that can be biodegraded and bioabsorbed within an animal body

2021 ◽  
Vol 7 (2) ◽  
pp. eabe3097
Author(s):  
Hongwei Sheng ◽  
Jingjing Zhou ◽  
Bo Li ◽  
Yuhang He ◽  
Xuetao Zhang ◽  
...  
Keyword(s):  
High Performance ◽  
Electronic Devices ◽  
Form Factors ◽  
Time Frame ◽  
Water Soluble ◽  
Two Dimensional ◽  
Medical Electronics ◽  
Thin Structure ◽  
Shed Light

It has been an outstanding challenge to achieve implantable energy modules that are mechanically soft (compatible with soft organs and tissues), have compact form factors, and are biodegradable (present for a desired time frame to power biodegradable, implantable medical electronics). Here, we present a fully biodegradable and bioabsorbable high-performance supercapacitor implant, which is lightweight and has a thin structure, mechanical flexibility, tunable degradation duration, and biocompatibility. The supercapacitor with a high areal capacitance (112.5 mF cm−2 at 1 mA cm−2) and energy density (15.64 μWh cm−2) uses two-dimensional, amorphous molybdenum oxide (MoOx) flakes as electrodes, which are grown in situ on water-soluble Mo foil using a green electrochemical strategy. Biodegradation behaviors and biocompatibility of the associated materials and the supercapacitor implant are systematically studied. Demonstrations of a supercapacitor implant that powers several electronic devices and that is completely degraded after implantation and absorbed in rat body shed light on its potential uses.

scholarly journals Enhanced Tensile Strength of Monolithic Epoxy with Highly Dispersed TiO2-Graphene Nanocomposites

2021 ◽  
Vol 5 (7) ◽  
pp. 191
Author(s):  
Yanshuai Wang ◽  
Siyao Guo ◽  
Biqin Dong ◽  
Feng Xing
Keyword(s):  
Tensile Strength ◽  
Epoxy Resin ◽  
Mechanical Performance ◽  
Chemical Properties ◽  
High Mechanical Property ◽  
Graphene Nanocomposites ◽  
Highly Dispersed ◽  
Dispersion State ◽  
Physical And Chemical

The functionalization of graphene has been reported widely, showing special physical and chemical properties. However, due to the lack of surface functional groups, the poor dispersibility of graphene in solvents strongly limits its engineering applications. This paper develops a novel green “in-situ titania intercalation” method to prepare a highly dispersed graphene, which is enabled by the generation of the titania precursor between the layer of graphene at room temperature to yield titania-graphene nanocomposites (TiO2-RGO). The precursor of titania will produce amounts of nano titania between the graphene interlayers, which can effectively resist the interfacial van der Waals force of the interlamination in graphene for improved dispersion state. Such highly dispersed TiO2-RGO nanocomposites were used to modify epoxy resin. Surprisingly, significant enhancement of the mechanical performance of epoxy resin was observed when incorporating the titania-graphene nanocomposites, especially the improvements in tensile strength and elongation at break, with 75.54% and 176.61% increases at optimal usage compared to the pure epoxy, respectively. The approach presented herein is easy and economical for industry production, which can be potentially applied to the research of high mechanical property graphene/epoxy composite system.

scholarly journals RNA In Situ Hybridization for Detecting Gene Expression Patterns in the Abdomens and Wings of Drosophila Species

2021 ◽  
Vol 4 (1) ◽  
pp. 20
Author(s):  
Mujeeb Shittu ◽  
Tessa Steenwinkel ◽  
William Dion ◽  
Nathan Ostlund ◽  
Komal Raja ◽  
...  
Keyword(s):  
Gene Expression ◽  
In Situ Hybridization ◽  
Expression Patterns ◽  
Drosophila Species ◽  
Gene Expression Patterns ◽  
Probe Design ◽  
Tissue Preparation ◽  
Design And Synthesis ◽  
Rna In Situ Hybridization

RNA in situ hybridization (ISH) is used to visualize spatio-temporal gene expression patterns with broad applications in biology and biomedicine. Here we provide a protocol for mRNA ISH in developing pupal wings and abdomens for model and non-model Drosophila species. We describe best practices in pupal staging, tissue preparation, probe design and synthesis, imaging of gene expression patterns, and image-editing techniques. This protocol has been successfully used to investigate the roles of genes underlying the evolution of novel color patterns in non-model Drosophila species.

Sign in / Sign up

Export Citation Format

Share Document