Evaluation of environmental impacts of hotel buildings having different envelopes using a life cycle analysis approach

2017 ◽  
Vol 27 (4) ◽  
pp. 561-580 ◽  
Author(s):  
D. Kaoula ◽  
A. Bouchair
Keyword(s):  
Life Cycle ◽  
Environmental Impacts ◽  
Life Cycle Analysis ◽  
Energy Performance ◽  
Hot Water ◽  
Environmental Cost ◽  
Analysis Approach ◽  
Comparative Approach ◽  
The Impact ◽  
Selective Collection

A life cycle analysis approach was used to assess the environmental impacts for three types of hotel buildings having various envelope configurations and materials, built in different climates: Algeria and France. The study assesses through a comparative approach the impact of building components on its energy performance and their environmental cost over the entire life cycle of the building. The life cycle analysis was performed using PLEIADES software tools. The results show that it is possible to reduce the energy requirements of both traditional and standard building envelopes by assigning low-consumption building scenarios. However, although these scenarios could reduce some environmental impacts, they could also enhance others. In order to improve the results of life cycle analysis, another variant that generates less impacts than previously simulated variants was developed by retaining the following environmental scenarios: superfluous material at the site, 5%; lifetime of doors and windows should be 30 years; coating life-time should be 10 years; use of natural gas for heating; wood energy for domestic hot water; consumption of cold water should be 0.2 m3/person/day; selective collection of glass, 50%; selective collection of paper, 30%; incinerated waste, 30%; and the produced waste should not be more than 1 kg/person/day.

scholarly journals Comparative Study on the Environmental Impact of Traditional Clay Bricks Mixed with Organic Waste Using Life Cycle Analysis

2018 ◽  
Vol 10 (8) ◽  
pp. 2917 ◽  
Author(s):  
José Lozano-Miralles ◽  
Manuel Hermoso-Orzáez ◽  
Carmen Martínez-García ◽  
José Rojas-Sola
Keyword(s):  
Life Cycle ◽  
Environmental Impact ◽  
Comparative Study ◽  
Environmental Impacts ◽  
Life Cycle Analysis ◽  
Organic Waste ◽  
Organic Additives ◽  
Promising Alternative ◽  
Clay Bricks ◽  
The Impact

The construction industry is responsible for 40–45% of primary energy consumption in Europe. Therefore, it is essential to find new materials with a lower environmental impact to achieve sustainable buildings. The objective of this study was to carry out the life cycle analysis (LCA) to evaluate the environmental impacts of baked clay bricks incorporating organic waste. The scope of this comparative study of LCA covers cradle to gate and involves the extraction of clay and organic waste from the brick, transport, crushing, modelling, drying and cooking. Local sustainability within a circular economy strategy is used as a laboratory test. The energy used during the cooking process of the bricks modified with organic waste, the gas emission concentrate and the emission factors are quantified experimentally in the laboratory. Potential environmental impacts are analysed and compared using the ReCiPe midpoint LCA method using SimaPro 8.0.5.13. These results achieved from this method are compared with those obtained with a second method—Impact 2002+ v2.12. The results of LCA show that the incorporation of organic waste in bricks is favourable from an environmental point of view and is a promising alternative approach in terms of environmental impacts, as it leads to a decrease of 15–20% in all the impact categories studied. Therefore, the suitability of the use of organic additives in clay bricks was confirmed, as this addition was shown to improve their efficiency and sustainability, thus reducing the environmental impact.

scholarly journals Cost-efficient Nearly Zero-Energy Buildings

2019 ◽  
Vol 111 ◽  
pp. 03075 ◽  
Author(s):  
Heike Erhorn-Kluttig ◽  
Hans Erhorn ◽  
Micha Illner
Keyword(s):  
Life Cycle ◽  
Minimum Energy ◽  
Energy Performance ◽  
Building Envelope ◽  
Hot Water ◽  
Technical Solution ◽  
Zero Energy ◽  
Solution Sets ◽  
The Impact ◽  
New Buildings

The next level of energy performance of new buildings within the European Union will be the Nearly Zero-Energy Building (NZEB). A lot of work has been spent on pilot and demonstration buildings on this and also even higher energy performance levels throughout all EU countries. However, most of the high performance buildings realised so far result in higher investment costs when compared to the current national minimum energy performance requirements. The considerably higher investment costs are one of the main barriers to the early application of the NZEB-level in Europe. The EU H2020 project CoNZEBs works on technical solution sets that result in lower investment costs for NZEBs, bringing the costs close to those of conventional new buildings. The focus is on multi-family houses. In each of the four participating countries Germany, Denmark, Italy and Slovenia a team of researchers is analysing which sets of marketready technologies at the building envelope, the services systems for heating, domestic hot water, ventilation and cooling (where required) in combination with renewable energy systems can fulfil the NZEB requirements at lower costs than those incurred by the national mainstream NZEB application. Additional efforts are being spent on the life-cycle costs and the life-cycle analysis of the solution sets, as well as on the impact of future developments of primary energy factors, energy costs and technology efficiencies.

scholarly journals Life Cycle Assessment of an Innovative Hybrid Energy Storage System for Residential Buildings in Continental Climates

2021 ◽  
Vol 11 (9) ◽  
pp. 3820
Author(s):  
Noelia Llantoy ◽  
Gabriel Zsembinszki ◽  
Valeria Palomba ◽  
Andrea Frazzica ◽  
Mattia Dallapiccola ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Residential Buildings ◽  
Storage System ◽  
Energy Storage System ◽  
Hot Water ◽  
Hybrid Energy ◽  
Hybrid Energy Storage ◽  
Innovative System ◽  
The Impact

With the aim of contributing to achieving the decarbonization of the energy sector, the environmental impact of an innovative system to produce heating and domestic hot water for heating demand-dominated climates is assessed is evaluated. The evaluation is conducted using the life cycle assessment (LCA) methodology and the ReCiPe and IPCC GWP indicators for the manufacturing and operation stages, and comparing the system to a reference one. Results show that the innovative system has a lower overall impact than the reference one. Moreover, a parametric study to evaluate the impact of the refrigerant is carried out, showing that the impact of the overall systems is not affected if the amount of refrigerant or the impact of refrigerant is increased.

scholarly journals Life Cycle Assessment (LCA) of an Innovative Compact Hybrid Electrical-Thermal Storage System for Residential Buildings in Mediterranean Climate

2021 ◽  
Vol 13 (9) ◽  
pp. 5322
Author(s):  
Gabriel Zsembinszki ◽  
Noelia Llantoy ◽  
Valeria Palomba ◽  
Andrea Frazzica ◽  
Mattia Dallapiccola ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Mediterranean Climate ◽  
Residential Buildings ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Hot Water ◽  
Electrical Consumption ◽  
The Impact

The buildings sector is one of the least sustainable activities in the world, accounting for around 40% of the total global energy demand. With the aim to reduce the environmental impact of this sector, the use of renewable energy sources coupled with energy storage systems in buildings has been investigated in recent years. Innovative solutions for cooling, heating, and domestic hot water in buildings can contribute to the buildings’ decarbonization by achieving a reduction of building electrical consumption needed to keep comfortable conditions. However, the environmental impact of a new system is not only related to its electrical consumption from the grid, but also to the environmental load produced in the manufacturing and disposal stages of system components. This study investigates the environmental impact of an innovative system proposed for residential buildings in Mediterranean climate through a life cycle assessment. The results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage. A parametric study was also performed to investigate the effect of the design of the storage system on the overall system impact.

scholarly journals LCA and Exergo-Environmental Evaluation of a Combined Heat and Power Double-Flash Geothermal Power Plant

2021 ◽  
Vol 13 (4) ◽  
pp. 1935
Author(s):  
Vitantonio Colucci ◽  
Giampaolo Manfrida ◽  
Barbara Mendecka ◽  
Lorenzo Talluri ◽  
Claudio Zuffi
Keyword(s):  
Life Cycle ◽  
Power Plant ◽  
Environmental Analysis ◽  
Combined Heat And Power ◽  
Hot Water ◽  
Environmental Cost ◽  
Published Data ◽  
Geothermal Power Plant ◽  
Geothermal Power ◽  
Double Flash

This study deals with the life cycle assessment (LCA) and an exergo-environmental analysis (EEvA) of the geothermal Power Plant of Hellisheiði (Iceland), a combined heat and power double flash plant, with an installed power of 303.3 MW for electricity and 133 MW for hot water. LCA approach is used to evaluate and analyse the environmental performance at the power plant global level. A more in-depth study is developed, at the power plant components level, through EEvA. The analysis employs existing published data with a realignment of the inventory to the latest data resource and compares the life cycle impacts of three methods (ILCD 2011 Midpoint, ReCiPe 2016 Midpoint-Endpoint, and CML-IA Baseline) for two different scenarios. In scenario 1, any emission abatement system is considered. In scenario 2, re-injection of CO2 and H2S is accounted for. The analysis identifies some major hot spots for the environmental power plant impacts, like acidification, particulate matter formation, ecosystem, and human toxicity, mainly caused by some specific sources. Finally, an exergo-environmental analysis allows indicating the wells as significant contributors of the environmental impact rate associated with the construction, Operation & Maintenance, and end of life stages and the HP condenser as the component with the highest environmental cost rate.

scholarly journals Life Cycle Assessment of Households in Santiago, Chile: Environmental Hotspots and Policy Analysis

2021 ◽  
Vol 13 (5) ◽  
pp. 2525
Author(s):  
Camila López-Eccher ◽  
Elizabeth Garrido-Ramírez ◽  
Iván Franchi-Arzola ◽  
Edmundo Muñoz
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Food Consumption ◽  
Household Income ◽  
Resource Scarcity ◽  
Life Cycles ◽  
The Impact ◽  
Freshwater Eutrophication

The aim of this study is to assess the environmental impacts of household life cycles in Santiago, Chile, by household income level. The assessment considered scenarios associated with environmental policies. The life cycle assessment was cradle-to-grave, and the functional unit considered all the materials and energy required to meet an inhabitant’s needs for one year (1 inh/year). Using SimaPro 9.1 software, the Recipe Midpoint (H) methodology was used. The impact categories selected were global warming, fine particulate matter formation, terrestrial acidification, freshwater eutrophication, freshwater ecotoxicity, mineral resource scarcity, and fossil resource scarcity. The inventory was carried out through the application of 300 household surveys and secondary information. The main environmental sources of households were determined to be food consumption, transport, and electricity. Food consumption is the main source, responsible for 33% of the environmental impacts on global warming, 69% on terrestrial acidification, and 29% on freshwater eutrophication. The second most crucial environmental hotspot is private transport, whose contribution to environmental impact increases as household income rises, while public transport impact increases in the opposite direction. In this sense, both positive and negative environmental effects can be generated by policies. Therefore, life-cycle environmental impacts, the synergy between policies, and households’ socio-economic characteristics must be considered in public policy planning and consumer decisions.

Environmental Analysis of Consumer Products During the Conceptual Phase of Product Design

2010 ◽  
Author(s):  
Matt R. Bohm ◽  
Karl R. Haapala ◽  
Kerry Poppa ◽  
Robert B. Stone ◽  
Irem Y. Tumer
Keyword(s):  
Life Cycle ◽  
Product Design ◽  
Environmental Impacts ◽  
Life Cycle Analysis ◽  
Real Life ◽  
Consumer Products ◽  
Design Knowledge ◽  
Concept Generation ◽  
Analysis Techniques ◽  
Research Show

This paper describes efforts taken to further transition life cycle analysis techniques from the latter, more detailed phases of design, to the early-on conceptual phase of product development. By using modern design methodologies such as automated concept generation and an archive of product design knowledge, known as the Design Repository, virtual concepts are created and specified. Streamlined life cycle analysis techniques are then used to determine the environmental impacts of the virtual concepts. As a means to benchmark the virtual results, analogous real-life products that have functional and component similarities are identified. The identified products are then scrutinized to determine their material composition and manufacturing attributes in order to perform an additional round of life cycle analysis for the actual products. The results of this research show that enough information exists within the conceptual phase of design (utilizing the Design Repository) to reasonably predict the relative environmental impacts of actual products based on virtual concepts.

scholarly journals Strategies to Improve the Energy Performance of Buildings: A Review of Their Life Cycle Impact

Buildings ◽  
2018 ◽  
Vol 8 (8) ◽  
pp. 105 ◽  
Author(s):  
Nadia MIRABELLA ◽  
Martin RÖCK ◽  
Marcella Ruschi Mendes SAADE ◽  
Carolin SPIRINCKX ◽  
Marc BOSMANS ◽  
...  
Keyword(s):  
Life Cycle ◽  
Case Studies ◽  
Environmental Impacts ◽  
Energy Use ◽  
Ghg Emissions ◽  
Energy Performance ◽  
Environmental Benefits ◽  
Embodied Energy ◽  
Trade Offs ◽  
Operational Energy

Globally, the building sector is responsible for more than 40% of energy use and it contributes approximately 30% of the global Greenhouse Gas (GHG) emissions. This high contribution stimulates research and policies to reduce the operational energy use and related GHG emissions of buildings. However, the environmental impacts of buildings can extend wide beyond the operational phase, and the portion of impacts related to the embodied energy of the building becomes relatively more important in low energy buildings. Therefore, the goal of the research is gaining insights into the environmental impacts of various building strategies for energy efficiency requirements compared to the life cycle environmental impacts of the whole building. The goal is to detect and investigate existing trade-offs in current approaches and solutions proposed by the research community. A literature review is driven by six fundamental and specific research questions (RQs), and performed based on two main tasks: (i) selection of literature studies, and (ii) critical analysis of the selected studies in line with the RQs. A final sample of 59 papers and 178 case studies has been collected, and key criteria are systematically analysed in a matrix. The study reveals that the high heterogeneity of the case studies makes it difficult to compare these in a straightforward way, but it allows to provide an overview of current methodological challenges and research gaps. Furthermore, the most complete studies provide valuable insights in the environmental benefits of the identified energy performance strategies over the building life cycle, but also shows the risk of burden shifting if only operational energy use is focused on, or when a limited number of environmental impact categories are assessed.

Sign in / Sign up

Export Citation Format

Share Document