Mechanical Behavior of Regular Twill Weave Structures; Part I: 3D Meso-Scale Geometrical Modelling

2015 ◽  
Vol 10 (1) ◽  
pp. 155892501501000
Author(s):  
Mostafa Jamshidi Avanaki ◽  
Ali Asghar Asgharian Jeddi
Keyword(s):  
Experimental Data ◽  
Mechanical Behavior ◽  
Structural Parameters ◽  
Woven Fabrics ◽  
Form Solution ◽  
Dimensional Structure ◽  
Uniaxial Tensile ◽  
Geometrical Modelling ◽  
Woven Structures ◽  
Meso Scale

The mechanical behavior of fabrics with different configurations has been investigated in many works by various approaches including the force equilibrium or energy methods. However, representing a suitable geometrical model for fabric structure is prerequisite to apply these approaches. This paper introduces an analytic 3D meso-scale geometrical modelling of regular twill weaves, in terms of a few structural parameters in 2D biaxial orthogonal woven fabrics. The model is proposed for the fabrics in their fully relaxed state considering their inherent skewness. For this purpose, a three dimensional structure is used to show this phenomenon. In this model, the yarns cross-section is assumed to be circular and the yarns path is assumed to be straight line (saw-tooth) in the unit cell which leads to the results that are in reasonable agreement with experimental data. These assumptions will be helpful in finding a close form solution for the mechanical behavior of woven structures. The proposed model has been verified by comparing its output with some experimental data for its areal mass and thickness in 2/2 twill fabric as a case study. By applying this model, the geometrical structural parameters such as skewness and weave angles as well as their total consumed yarns can be predicted theoretically. This model is a framework which will be used for estimating the initial deformation behavior of regular twill woven structures under uniaxial tensile loads in our forthcoming works.

Yield Characteristics of a Twill Dutch Woven Wire Mesh Via Experiments and Numerical Modeling

2013 ◽  
Vol 80 (4) ◽  
Author(s):  
Steven M. Kraft ◽  
Ali P. Gordon
Keyword(s):  
Heat Treatment ◽  
Numerical Modeling ◽  
Tensile Tests ◽  
Woven Fabrics ◽  
Wire Mesh ◽  
Uniaxial Tensile ◽  
3D Numerical Modeling ◽  
Stainless Steel 316L ◽  
Treatment Development ◽  
Woven Structures

Woven structures are steadily emerging as excellent reinforcing components in composite materials. Metallic woven meshes, unlike most woven fabrics, show high potential for strengthening via classical methods such as heat treatment. Development of strengthening processes for metallic woven materials, however, must account not only for behavior of the constituent wires, but also for the interactions between contacting wires. Yield behavior of a 325 × 2300 stainless steel 316L (SS316L) twill dutch woven wire mesh is analyzed via experimental data and 3D numerical modeling. The effects of short dwell-time heat treatment on the mechanical properties of this class of materials is investigated via uniaxial tensile tests in the main weave orientations. Scanning electron microscopy (SEM) is employed to investigate the effects of heat treatment on contacting wire interaction, prompted by observations of reduced ductility in the macrostructure of the mesh. Finally, the finite element method (FEM) is used to simulate the accumulation of plastic deformation in the mesostructure of the mesh, investigating how this wire level plasticity ultimately affects global material yielding.

A Non-Orthogonal Constitutive Material Model for Advanced Woven Fabrics Based on a Mesoscale Unit Cell

2016 ◽  
Author(s):  
Ozan Erol ◽  
Brian M. Powers ◽  
Michael Keefe
Keyword(s):  
Mechanical Behavior ◽  
Mechanical Response ◽  
Material Model ◽  
Shear Resistance ◽  
Woven Fabrics ◽  
Unit Cell ◽  
Uniaxial Tensile ◽  
Constitutive Material Model ◽  
Proposed Model ◽  
Constitutive Material

Advanced woven fabrics can provide a wide range of mechanical properties since the yarns can be arranged in different architectural patterns thus allowing the fabric structure to be tuned based on the specific needs. This adjustable nature makes them an attractive material choice for applications where versatility is highly desired. Hence, there is an increasing interest in woven fabrics in the recent years. They have been used in various applications such as deployable structures, protective garments, medical scaffolds and composites. With the increased interest, there is a need for efficient and accurate computational tools to investigate the mechanical behavior and deformation of woven fabrics for specific applications. Although there are several computational models in the literature that can model uniaxial and biaxial behavior of woven fabrics, there are not any commonly accepted material models for woven fabrics due to the complex interaction of trellising and deformation. Here, we propose an easy to implement constitutive material model based on a mesoscale unit cell of the woven fabrics. The proposed model utilizes the two prominent deformation mechanisms affecting the mechanical response at the mesoscale level: (1) Yarn stretching, and (2) shearing. These mesoscale mechanisms are mechanistically implemented within an unit cell by using truss and rotational springs to generate the mechanical response of the woven fabric. The yarns’ nonlinear mechanical behavior is modeled with non-linear trusses and assumed to be pin-jointed at the center of the unit cell. The truss elements are allowed to rotate at the pin-joint reproducing the yarns’ relative rotational motion during shearing. The fabric’s shear resistance involves two components: yarn-to-yarn relative rotation/sliding and yarn locking due to the yarn transverse compression. These components of the fabric shear resistance are modeled as a non-linear rotational spring located at the pin-joint which generates a moment resisting the shear deformation. The developed forces and moments from the trusses and rotational spring within the unit cell structure are then used to determine the continuum stress state of the material point. The material properties and parameters defined in the proposed model are easy to obtain from uniaxial tensile and shear tests on fabrics. To validate the material model, plain weave Kevlar KM2 fabric is modeled by replicating the standard uniaxial tensile and bias extension tests. The results obtained show that the material model provides a good description of the in-plane deformation and mechanical response.

Influence of post-welding tempering on mechanical behavior of friction welded joints from medium-carbon steels during tensile test

2020 ◽  
pp. 40-49
Author(s):  
A. S. Atamashkin ◽  
E. Yu. Priymak ◽  
N. V. Firsova
Keyword(s):  
Mechanical Behavior ◽  
Welded Joints ◽  
Welded Joint ◽  
Crack Nucleation ◽  
Carbon Steels ◽  
Uniaxial Tensile ◽  
Medium Carbon ◽  
Uniaxial Tensile Testing ◽  
Rotary Friction Welding ◽  
Medium Carbon Steels

The paper presents an analysis of the mechanical behavior of friction samples of welded joints from steels 30G2 (36 Mn 5) and 40 KhN (40Ni Cr 6), made by rotary friction welding (RFW). The influence of various temperature conditions of postweld tempering on the mechanical properties and deformation behavior during uniaxial tensile testing is analyzed. Vulnerabilities where crack nucleation and propagation occurred in specimens with a welded joint were identified. It was found that with this combination of steels, postweld tempering of the welded joint contributes to a decrease in the integral strength characteristics under conditions of static tension along with a significant decrease in the relative longitudinal deformation of the tested samples.

scholarly journals Experimental and Numerical Evaluation of Mechanical Properties of 3D-Printed Stainless Steel 316L Lattice Structures

2021 ◽  
Author(s):  
M. Carraturo ◽  
G. Alaimo ◽  
S. Marconi ◽  
E. Negrello ◽  
E. Sgambitterra ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Mechanical Behavior ◽  
Numerical Simulations ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test ◽  
Lattice Structures ◽  
Stainless Steel 316L ◽  
Research Attention ◽  
Octet Truss

AbstractAdditive manufacturing (AM), and in particular selective laser melting (SLM) technology, allows to produce structural components made of lattice structures. These kinds of structures have received a lot of research attention over recent years due to their capacity to generate easy-to-manufacture and lightweight components with enhanced mechanical properties. Despite a large amount of work available in the literature, the prediction of the mechanical behavior of lattice structures is still an open issue for researchers. Numerical simulations can help to better understand the mechanical behavior of such a kind of structure without undergoing long and expensive experimental campaigns. In this work, we compare numerical and experimental results of a uniaxial tensile test for stainless steel 316L octet-truss lattice specimen. Numerical simulations are based on both the nominal as-designed geometry and the as-build geometry obtained through the analysis of µ-CT images. We find that the use of the as-build geometry is fundamental for an accurate prediction of the mechanical behavior of lattice structures.

scholarly journals Brain capillary structures of schizophrenia cases and controls show a correlation with their neuron structures

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Rino Saiga ◽  
Masayuki Uesugi ◽  
Akihisa Takeuchi ◽  
Kentaro Uesugi ◽  
Yoshio Suzuki ◽  
...  
Keyword(s):  
Blood Vessels ◽  
Structural Parameters ◽  
Three Dimensional ◽  
Superior Temporal Gyrus ◽  
Anterior Cingulate ◽  
Dimensional Structure ◽  
Constant Diameter ◽  
The Mean ◽  
Cartesian Coordinate ◽  
Micrometer Scale

AbstractBrain blood vessels constitute a micrometer-scale vascular network responsible for supply of oxygen and nutrition. In this study, we analyzed cerebral tissues of the anterior cingulate cortex and superior temporal gyrus of schizophrenia cases and age/gender-matched controls by using synchrotron radiation microtomography or micro-CT in order to examine the three-dimensional structure of cerebral vessels. Over 1 m of cerebral blood vessels was traced to build Cartesian-coordinate models, which were then used for calculating structural parameters including the diameter and curvature of the vessels. The distribution of vessel outer diameters showed a peak at 7–9 μm, corresponding to the diameter of the capillaries. Mean curvatures of the capillary vessels showed a significant correlation to the mean curvatures of neurites, while the mean capillary diameter was almost constant, independent of the cases. Our previous studies indicated that the neurites of schizophrenia cases are thin and tortuous compared to controls. The curved capillaries with a constant diameter should occupy a nearly constant volume, while neurons suffering from neurite thinning should have reduced volumes, resulting in a volumetric imbalance between the neurons and the vessels. We suggest that the observed structural correlation between neurons and blood vessels is related to neurovascular abnormalities in schizophrenia.

scholarly journals Ability of Constitutive Models to Characterize the Temperature Dependence of Rubber Hyperelasticity and to Predict the Stress-Strain Behavior of Filled Rubber under Different Defor Mation States

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 369
Author(s):  
Xintao Fu ◽  
Zepeng Wang ◽  
Lianxiang Ma
Keyword(s):  
Experimental Data ◽  
Temperature Dependence ◽  
Mechanical Response ◽  
Constitutive Models ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test ◽  
Chain Model ◽  
Stress Strain ◽  
Filled Rubber ◽  
Yeoh Model

In this paper, some representative hyperelastic constitutive models of rubber materials were reviewed from the perspectives of molecular chain network statistical mechanics and continuum mechanics. Based on the advantages of existing models, an improved constitutive model was developed, and the stress–strain relationship was derived. Uniaxial tensile tests were performed on two types of filled tire compounds at different temperatures. The physical phenomena related to rubber deformation were analyzed, and the temperature dependence of the mechanical behavior of filled rubber in a larger deformation range (150% strain) was revealed from multiple angles. Based on the experimental data, the ability of several models to describe the stress–strain mechanical response of carbon black filled compound was studied, and the application limitations of some constitutive models were revealed. Combined with the experimental data, the ability of Yeoh model, Ogden model (n = 3), and improved eight-chain model to characterize the temperature dependence was studied, and the laws of temperature dependence of their parameters were revealed. By fitting the uniaxial tensile test data and comparing it with the Yeoh model, the improved eight-chain model was proved to have a better ability to predict the hyperelastic behavior of rubber materials under different deformation states. Finally, the improved eight-chain model was successfully applied to finite element analysis (FEA) and compared with the experimental data. It was found that the improved eight-chain model can accurately describe the stress–strain characteristics of filled rubber.

Mechanical behavior of chemically treated ostrich pericardium subjected to uniaxial tensile testing: influence of the suture

2002 ◽  
Vol 62 (1) ◽  
pp. 73-81 ◽  
Author(s):  
J. M. García Páez ◽  
A. Carrera ◽  
E. Jorge Herrero ◽  
I. Millán ◽  
A. Rocha ◽  
...  
Keyword(s):  
Mechanical Behavior ◽  
Tensile Testing ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Testing ◽  
Chemically Treated

Mechanical properties of PVDF-coated fabric under tensile tests

2015 ◽  
Vol 35 (4) ◽  
pp. 377-390 ◽  
Author(s):  
Andrzej Ambroziak
Keyword(s):  
Mechanical Properties ◽  
Polyvinylidene Fluoride ◽  
Cyclic Load ◽  
Tensile Tests ◽  
Woven Fabrics ◽  
Uniaxial Tensile ◽  
Cyclic Tests ◽  
Comprehensive Investigation ◽  
Coated Fabric ◽  
Coated Fabrics

Abstract This article describes the laboratory tests necessary to identify the mechanical properties of the polyvinylidene fluoride (PVDF)-coated fabrics named Precontraint 1202S and Precontraint 1302S. First, a short survey of the literature concerning the description of coated woven fabrics is presented. Second, the material parameters for PVDF-coated fabrics are specified on the basis of biaxial tensile tests. A comparison of the 1:1 biaxial and the uniaxial tensile tests results is also given. Additionally, biaxial cyclic tests were performed to observe the change of immediate mechanical properties under cyclic load. The article is aimed as an introduction to a comprehensive investigation of the mechanical properties of coated fabrics.

Sign in / Sign up

Export Citation Format

Share Document