The “cheerleader effect” in facial and bodily attractiveness: A result of memory bias and not perceptual encoding

2020 ◽  
pp. 174702182097608
Author(s):  
Jean YJ Hsieh ◽  
O Scott Gwinn ◽  
Kevin R Brooks ◽  
Ian D Stephen ◽  
Daniel J Carragher ◽  
...  
Keyword(s):  
Memory Bias ◽  
Memory Condition ◽  
Body Images ◽  
Perceptual Condition ◽  
Initial Stage ◽  
Two Parameters

Individual faces are rated as more attractive when presented in a group compared with when presented individually; a finding dubbed the “cheerleader effect.” As a relatively recent discovery, the conditions necessary to observe the effect are not clearly understood. We sought to better define these conditions by examining two parameters associated with the effect. Our first aim was to determine whether the effect is specific to faces or occurs also for human bodies. Both face and body images were rated as being more attractive when presented in groups than when presented in isolation, demonstrating that the cheerleader effect is not restricted to faces. Furthermore, the effect was significantly larger for bodies than faces. Our second aim was to determine whether the cheerleader effect originates from a bias in memory or occurs during perceptual encoding. Participants in the “memory” condition provided attractiveness ratings after images had been removed from the testing screen, whereas participants in the “perceptual” condition provided ratings while the images remained visible, thereby eliminating the memory components of the paradigm. Significant cheerleader effects were only observed in the memory condition. We conclude that the cheerleader effect for faces and bodies is due to a bias in memory and does not occur at an initial stage of perceptual encoding.

A linear stability analysis of tidally generated sand waves

2000 ◽  
Vol 417 ◽  
pp. 303-322 ◽  
Author(s):  
THEO GERKEMA
Keyword(s):  
Stability Analysis ◽  
Linear Stability ◽  
Linear Stability Analysis ◽  
Sand Wave ◽  
Length Scale ◽  
Wave Regime ◽  
Sand Waves ◽  
Initial Stage ◽  
Bed Slope ◽  
Two Parameters

A linear stability analysis is carried out to examine the initial stage of sand-wave growth under tidal flows and the occurrence of a preferred length scale. The fact that these bedforms typically have length scales small compared to the tidal excursion is exploited by adopting an asymptotic approach to solve the hydrodynamic part of the problem, i.e. to find the hydrodynamic response to an initially small bed perturbation. This method is shown to have important advantages over previously used methods, since it allows an exploration of the complete sand-wave regime (whereas other methods fail for short sand waves), and in general it is also more accurate. It is found that the selection of a preferred length scale depends mainly on only two parameters (the bed-slope coefficient, and the ratio of friction velocity to eddy viscosity), whereas there appears to be almost no dependence on the water depth.

scholarly journals Geometry-Based Preliminary Quantification of Landslide-Induced Impulse Wave Attenuation in Mountain Lakes

2021 ◽  
Vol 11 (24) ◽  
pp. 11614
Author(s):  
Andrea Franco ◽  
Barbara Schneider-Muntau ◽  
Nicholas J. Roberts ◽  
John J. Clague ◽  
Bernhard Gems
Keyword(s):  
Wave Attenuation ◽  
Mountain Lakes ◽  
Flow Depth ◽  
Wave Decay ◽  
Novel Approach ◽  
Initial Stage ◽  
Decay Potential ◽  
Impulse Waves ◽  
Highly Correlated ◽  
Two Parameters

In this work, a simple methodology for preliminarily assessing the magnitude of potential landslide-induced impulse waves’ attenuation in mountain lakes is presented. A set of metrics is used to define the geometries of theoretical mountain lakes of different sizes and shapes and to simulate impulse waves in them using the hydrodynamic software Flow-3D. The modeling results provide the ‘wave decay potential’, a ratio between the maximum wave amplitude and the flow depth at the shoreline. Wave decay potential is highly correlated with what is defined as the ‘shape product’, a metric that represents lake geometry. The relation between these two parameters can be used to evaluate wave dissipation in a natural lake given its geometric properties, and thus estimate expected flow depth at the shoreline. This novel approach is tested by applying it to a real-world event, the 2007 landslide-generated wave in Chehalis Lake (Canada), where the results match well with those obtained using the empirical equation provided by ETH Zurich (2019 Edition). This work represents the initial stage in the development of this method, and it encourages additional research and modeling in which the influence of the impacting characteristics on the resulting waves and flow depths is investigated.

Photo-electric Hβ and uvby photometry

1966 ◽  
Vol 24 ◽  
pp. 170-180
Author(s):  
D. L. Crawford
Keyword(s):  
Narrow Band ◽  
Line Strength ◽  
Interference Filter ◽  
B Stars ◽  
Relative Line ◽  
The Mean ◽  
F Stars ◽  
Two Parameters ◽  
Filter Photometry ◽  
The Continuum

Early in the 1950's Strömgren (1, 2, 3, 4, 5) introduced medium to narrow-band interference filter photometry at the McDonald Observatory. He used six interference filters to obtain two parameters of astrophysical interest. These parameters he calledlandc, for line and continuum hydrogen absorption. The first measured empirically the absorption line strength of Hβby means of a filter of half width 35Å centered on Hβand compared to the mean of two filters situated in the continuum near Hβ. The second index measured empirically the Balmer discontinuity by means of a filter situated below the Balmer discontinuity and two above it. He showed that these two indices could accurately predict the spectral type and luminosity of both B stars and A and F stars. He later derived (6) an indexmfrom the same filters. This index was a measure of the relative line blanketing near 4100Å compared to two filters above 4500Å. These three indices confirmed earlier work by many people, including Lindblad and Becker. References to this earlier work and to the systems discussed today can be found in Strömgren's article inBasic Astronomical Data(7).

Radiation Damage of Support Films

1981 ◽  
Vol 39 ◽  
pp. 28-29
Author(s):  
H.A. Cohen ◽  
W. Chiu
Keyword(s):  
Transfer Function ◽  
Low Temperatures ◽  
Carbon Support ◽  
Contrast Transfer Function ◽  
Electron Dose ◽  
Imaging Parameters ◽  
Negative Stain ◽  
Phase Corrections ◽  
Two Parameters ◽  
Medium Dose

The goal of imaging the finest detail possible in biological specimens leads to contradictory requirements for the choice of an electron dose. The dose should be as low as possible to minimize object damage, yet as high as possible to optimize image statistics. For specimens that are protected by low temperatures or for which the low resolution associated with negative stain is acceptable, the first condition may be partially relaxed, allowing the use of (for example) 6 to 10 e/Å2. However, this medium dose is marginal for obtaining the contrast transfer function (CTF) of the microscope, which is necessary to allow phase corrections to the image. We have explored two parameters that affect the CTF under medium dose conditions.Figure 1 displays the CTF for carbon (C, row 1) and triafol plus carbon (T+C, row 2). For any column, the images to which the CTF correspond were from a carbon covered hole (C) and the adjacent triafol plus carbon support film (T+C), both recorded on the same micrograph; therefore the imaging parameters of defocus, illumination angle, and electron statistics were identical.

Reaction couples of ceramic thin films prepared by CVD

1988 ◽  
Vol 46 ◽  
pp. 798-799
Author(s):  
D.W. Susnitzky ◽  
S.R. Summerfelt ◽  
C.B. Carter
Keyword(s):  
Thin Film ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Deposition Process ◽  
Solid State Reactions ◽  
Spatial Distributions ◽  
Diffusion Couples ◽  
Kinetics Studies ◽  
Ceramic Thin Films ◽  
Initial Stage

Solid-state reactions have traditionally been studied in the form of diffusion couples. This ‘bulk’ approach has been modified, for the specific case of the reaction between NiO and Al2O3, by growing NiAl2O4 (spinel) from electron-transparent Al2O3 TEM foils which had been exposed to NiO vapor at 1415°C. This latter ‘thin-film’ approach has been used to characterize the initial stage of spinel formation and to produce clean phase boundaries since further TEM preparation is not required after the reaction is completed. The present study demonstrates that chemical-vapor deposition (CVD) can be used to deposit NiO particles, with controlled size and spatial distributions, onto Al2O3 TEM specimens. Chemical reactions do not occur during the deposition process, since CVD is a relatively low-temperature technique, and thus the NiO-Al2O3 interface can be characterized. Moreover, a series of annealing treatments can be performed on the same sample which allows both Ni0-NiAl2O4 and NiAl2O4-Al2O3 interfaces to be characterized and which therefore makes this technique amenable to kinetics studies of thin-film reactions.

Applications of Scanning Microscopy in Biomedical Research

1968 ◽  
Vol 26 ◽  
pp. 354-355
Author(s):  
T. L. Hayes
Keyword(s):  
Information Content ◽  
Biomedical Research ◽  
Biomedical Applications ◽  
Three Dimensional ◽  
Dental Enamel ◽  
Resolving Power ◽  
Whole Mount ◽  
Two Parameters ◽  
Content Information ◽  
Sectioned Tissue

Biomedical applications of the scanning electron microscope (SEM) have increased in number quite rapidly over the last several years. Studies have been made of cells, whole mount tissue, sectioned tissue, particles, human chromosomes, microorganisms, dental enamel and skeletal material. Many of the advantages of using this instrument for such investigations come from its ability to produce images that are high in information content. Information about the chemical make-up of the specimen, its electrical properties and its three dimensional architecture all may be represented in such images. Since the biological system is distinctive in its chemistry and often spatially scaled to the resolving power of the SEM, these images are particularly useful in biomedical research.In any form of microscopy there are two parameters that together determine the usefulness of the image. One parameter is the size of the volume being studied or resolving power of the instrument and the other is the amount of information about this volume that is displayed in the image. Both parameters are important in describing the performance of a microscope. The light microscope image, for example, is rich in information content (chemical, spatial, living specimen, etc.) but is very limited in resolving power.

Decoration technique and surface physics

1978 ◽  
Vol 36 (1) ◽  
pp. 436-437 ◽  
Author(s):  
H. Bethge
Keyword(s):  
Diffusion Path ◽  
Special Importance ◽  
Surface Physics ◽  
Step Structure ◽  
Initial Stage ◽  
Special Cases ◽  
Atomic Surface ◽  
The Mean ◽  
Bulk Structure ◽  
Decoration Technique

Besides the atomic surface structure, diverging in special cases with respect to the bulk structure, the real structure of a surface Is determined by the step structure. Using the decoration technique /1/ it is possible to image step structures having step heights down to a single lattice plane distance electron-microscopically. For a number of problems the knowledge of the monatomic step structures is important, because numerous problems of surface physics are directly connected with processes taking place at these steps, e.g. crystal growth or evaporation, sorption and nucleatlon as initial stage of overgrowth of thin films.To demonstrate the decoration technique by means of evaporation of heavy metals Fig. 1 from our former investigations shows the monatomic step structure of an evaporated NaCI crystal. of special Importance Is the detection of the movement of steps during the growth or evaporation of a crystal. From the velocity of a step fundamental quantities for the molecular processes can be determined, e.g. the mean free diffusion path of molecules.

Transcription factor/DNA interactions visualized by electron spectroscopic imaging

1992 ◽  
Vol 50 (1) ◽  
pp. 450-451
Author(s):  
David P. Bazett-Jones ◽  
Mark L. Brown
Keyword(s):  
Transcription Factor ◽  
Dna Sequences ◽  
Transcription Initiation ◽  
Molecular Mechanisms ◽  
Phosphorus Content ◽  
Spectroscopic Imaging ◽  
Electron Spectroscopic Imaging ◽  
Dna Backbone ◽  
Two Parameters ◽  
High Level

A multisubunit RNA polymerase enzyme is ultimately responsible for transcription initiation and elongation of RNA, but recognition of the proper start site by the enzyme is regulated by general, temporal and gene-specific trans-factors interacting at promoter and enhancer DNA sequences. To understand the molecular mechanisms which precisely regulate the transcription initiation event, it is crucial to elucidate the structure of the transcription factor/DNA complexes involved. Electron spectroscopic imaging (ESI) provides the opportunity to visualize individual DNA molecules. Enhancement of DNA contrast with ESI is accomplished by imaging with electrons that have interacted with inner shell electrons of phosphorus in the DNA backbone. Phosphorus detection at this intermediately high level of resolution (≈lnm) permits selective imaging of the DNA, to determine whether the protein factors compact, bend or wrap the DNA. Simultaneously, mass analysis and phosphorus content can be measured quantitatively, using adjacent DNA or tobacco mosaic virus (TMV) as mass and phosphorus standards. These two parameters provide stoichiometric information relating the ratios of protein:DNA content.

Practical Importance of Spatial Resolution and Analytical Sensitivity in AEM X-ray Microanalysis

1990 ◽  
Vol 48 (2) ◽  
pp. 432-433
Author(s):  
J. Zhang ◽  
D.B. Williams ◽  
J.I. Goldstein
Keyword(s):  
Spatial Resolution ◽  
Practical Importance ◽  
Beam Current ◽  
Specimen Thickness ◽  
Analytical Sensitivity ◽  
Related Factors ◽  
X Ray ◽  
Probe Size ◽  
Excitation Volume ◽  
Two Parameters

Analytical sensitivity and spatial resolution are important and closely related factors in x-ray microanalysis using the AEM. Analytical sensitivity is the ability to distinguish, for a given element under given conditions, between two concentrations that are nearly equal. The analytical sensitivity is directly related to the number of x-ray counts collected and, therefore, to the probe current, specimen thickness and counting time. The spatial resolution in AEM analysis is determined by the probe size and beam broadening in the specimen. A finer probe and a thinner specimen give a higher spatial resolution. However, the resulting lower beam current and smaller X-ray excitation volume degrade analytical sensitivity. A compromise must be made between high spatial resolution and an acceptable analytical sensitivity. In this paper, we show the necessity of evaluating these two parameters in order to determine the low temperature Fe-Ni phase diagram.A Phillips EM400T AEM with an EDAX/TN2000 EDS/MCA system and a VG HB501 FEG STEM with a LINK AN10 EDS/MCA system were used.

Nucleation and initial growth of Pd2Si crystals on Si(111)

1993 ◽  
Vol 51 ◽  
pp. 844-845
Author(s):  
Xianghong Tong ◽  
Oliver Pohland ◽  
J. Murray Gibson
Keyword(s):  
High Vacuum ◽  
Dark Field ◽  
Ultra High Vacuum ◽  
Initial Growth ◽  
Surface And Interface ◽  
Dark Field Imaging ◽  
Transmission Electron ◽  
Initial Stage ◽  
Effect Of Surface

The nucleation and initial stage of Pd2Si crystals on Si(111) surface is studied in situ using an Ultra-High Vacuum (UHV) Transmission Electron Microscope (TEM). A modified JEOL 200CX TEM is used for the study. The Si(111) sample is prepared by chemical thinning and is cleaned inside the UHV chamber with base pressure of 1x10−9 τ. A Pd film of 20 Å thick is deposited on to the Si(111) sample in situ using a built-in mini evaporator. This room temperature deposited Pd film is thermally annealed subsequently to form Pd2Si crystals. Surface sensitive dark field imaging is used for the study to reveal the effect of surface and interface steps.The initial growth of the Pd2Si has three stages: nucleation, growth of the nuclei and coalescence of the nuclei. Our experiments shows that the nucleation of the Pd2Si crystal occurs randomly and almost instantaneously on the terraces upon thermal annealing or electron irradiation.

Sign in / Sign up

Export Citation Format

Share Document