scholarly journals Nanodesigned coatings obtained by plasma electrolytic oxidation of titanium implant and their cytotoxicity

2021 ◽  
Vol 19 ◽  
pp. 228080001882225
Author(s):  
Marko Magić ◽  
Božana Čolović ◽  
Saša Vasilijić ◽  
Nenad Tadić ◽  
Stevan Stojadinović ◽  
...  
Keyword(s):  
Plasma Electrolytic Oxidation ◽  
Cell Attachment ◽  
Titanium Implant ◽  
Ionic Exchange ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic ◽  
The Given ◽  
Scanning Electron

The titanium implant was treated with plasma electrolytic oxidation and subsequent ionic exchange and thermal treatment in order to obtain bioactive layer consisting of titanium oxide, calcium and sodium titanates and hydroxyapatite, as confirmed by X-ray diffraction (XRD). Scanning electron microscopy (SEM) revealed that the given method, besides corresponding phase composition, enables suitable nanotopology for cell attachment and proliferation. Cytotoxicity investigations by MTT, LDH and propidium iodide assays and light microscopy showed that these coatings were not toxic to L929 cells.

MICROSTRUCTURE AND WEARING PROPERTIES OF PEO COATINGS: EFFECTS OF Al2O3 AND TiO2

2018 ◽  
Vol 25 (05) ◽  
pp. 1850102 ◽  
Author(s):  
Y. ZHANG ◽  
W. FAN ◽  
H. Q. DU ◽  
Y. W. ZHAO
Keyword(s):  
Photoelectron Spectroscopy ◽  
Plasma Electrolytic Oxidation ◽  
Xps Analysis ◽  
X Ray Diffraction ◽  
Properties Of Coatings ◽  
X Ray ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic ◽  
Peo Coatings ◽  
Scanning Electron

Plasma electrolytic oxidation (PEO) coatings were formed on aluminium alloy in additive Al2O3- and TiO2-containing Na2SiO3-based electrolytes, respectively. The effect of these additives on morphology, composition and wearing properties of coatings was investigated. The morphology and composition of coatings were studied by means of scanning electron microscopy (SEM) and X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS). Analysis of wearing properties of coatings were done by friction and wearing experiment. It was found that the use of additives greatly affects the surface morphology of coatings. It is shown that the content of [Formula: see text]-Al2O3 in coatings formed in Al2O3-containing electrolytes increased with the addition of Al2O3. However, the content of [Formula: see text]-Al2O3 in coatings formed in TiO2-containing electrolytes first increased and then decreased. Among these coatings, the coating formed in silicate-based electrolytes system containing 7[Formula: see text]g/L Al2O3 showed the most superior wearing properties.

Composition, Surface Structure and Catalytic Properties of Manganese- and Cobalt-Containing Oxide Layers on Titanium

2014 ◽  
Vol 875-877 ◽  
pp. 351-355 ◽  
Author(s):  
M.S. Vasilyeva ◽  
V.S. Rudnev
Keyword(s):  
Surface Structure ◽  
Plasma Electrolytic Oxidation ◽  
Catalytic Properties ◽  
Oxidation Of Co ◽  
Oxide Layers ◽  
X Ray ◽  
Electrolytic Oxidation ◽  
Catalytically Active ◽  
Plasma Electrolytic ◽  
Scanning Electron

Silicon-containing oxide layers deposited on titanium using the plasma electrolytic oxidation (PEO) method were modified with manganese and cobalt compound through impregnation followed by annealing. The obtained manganese composites are catalytically active in the process of oxidation of CO at 100 оС, while cobalt-containing structures demonstrate this type of activity at temperatures above 200оС. The composition and surface structure of the obtained systems were investigated by means of X-ray phase and energy dispersive analyses and by high resolution scanning electron microscopy (SEM). Granule-like particles with diameters of a few dozens of nanometers were observed on the surface of oxide-cobalt layers on titanium, whereas the surface of oxide-manganese layers was coated by nano-whiskers of diameters <50 nm and length <1 μm. The presence of manganese-containing nano-whiskers substantially increases the catalyst specific surface, thus facilitating the attainment of higher degree of transformation of initial gaseous substances.

scholarly journals Incorporation of zirconium into PEO coating on Ti6Al4V alloy from acidic electrolyte

2021 ◽  
Vol 8 (6) ◽  
pp. 974-989
Author(s):  
Jie Sun ◽  
◽  
Tzvetanka Boiadjieva-Scherzer ◽  
Hermann Kronberger ◽  
Keyword(s):  
Phase Composition ◽  
Plasma Electrolytic Oxidation ◽  
Ti6al4v Alloy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electrolytic Oxidation ◽  
Acidic Electrolyte ◽  
Plasma Electrolytic ◽  
Cu And Zn ◽  
Zr Alloys

<abstract> <p>To imitate the superior biocompatibility of Ti–Zr alloys at reduced cost, conventional Ti6Al4V alloy was modified via plasma electrolytic oxidation (PEO). The influence of different additives on the phase composition and topography was investigated in acidic electrolytes containing Zr(SO<sub>4</sub>)<sub>2</sub>·H<sub>2</sub>O with potentiostatically controlled PEO at different pulse frequencies. Apart from the primary intention to generate Zr enriched phases, formation and incorporation in the ceramic layer of potential antibacterial Cu and Zn species was achieved and examined by X-ray diffraction. The thickness of the oxide layer, the adhesion and the layers' composition were evaluated using FIB and SEM-EDX.</p> </abstract>

scholarly journals Microstructure and phase composition of surface layers formed on aluminium alloys by plasma electrolytic oxidation

2020 ◽  
Vol 30 (1) ◽  
pp. 1-6
Author(s):  
Maria-Magdalena DICU ◽  
◽  
Paul-Costinel DICU
Keyword(s):  
Aluminium Alloys ◽  
Plasma Electrolytic Oxidation ◽  
Sodium Metasilicate ◽  
X Ray Diffraction ◽  
Surface Layers ◽  
X Ray ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic ◽  
Xrd Techniques

This paper presents elaboration and structural characterization of surface layers formed on aluminumalloys by plasma electrolytic oxidation (PEO). The electrolyte is a mixture consisting: sodium metasilicate and sodium hydroxide. The coatings obtained by PEO were investigated with: scanning electron microscopy (SEM) with Energy dispersive X-ray spectrometer (EDX) and X-ray diffraction (XRD)techniques.

scholarly journals Plasma Electrolytic Oxidation Treatment of Zr-2.5%Nb Alloy for Corrosion Resistance Enhancement

2019 ◽  
Vol 69 (12) ◽  
pp. 3490-3493
Author(s):  
Elisabeta Coaca ◽  
Alexandru Marin ◽  
Oana Rusu ◽  
Viorel Malinovschi ◽  
Victor Andrei
Keyword(s):  
Corrosion Resistance ◽  
Plasma Electrolytic Oxidation ◽  
Aqueous Electrolyte ◽  
Oxide Coating ◽  
Electrolyte Solutions ◽  
X Ray Diffraction ◽  
Oxidation Treatment ◽  
X Ray ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic

Anticorrosion layers were prepared on commercial Zr-2.5%Nb alloy by employing plasma electrolytic oxidation (PEO) process in aqueous electrolyte solutions. Microstructure and electrochemical behavior were evaluated using X-ray diffraction (XRD), optical metallography and potentiodynamic polarization measurements. The obtained coatings are uneven, presenting a dominant monoclinic crystallographic phase of ZrO2. Enhanced corrosion resistance was attributed to the PEO-treated samples compared to the commercial black oxide coating.

Tribological Properties of the Ceramic Coatings Prepared by Plasma Electrolytic Oxidation (PEO) on the Al6061 Alloy

2010 ◽  
Vol 123-125 ◽  
pp. 1063-1066 ◽  
Author(s):  
Kai Wang ◽  
Sang Sik Beyun ◽  
Bon Heun Koo ◽  
Yi Qi Wang ◽  
Jung I. Song
Keyword(s):  
Plasma Electrolytic Oxidation ◽  
Ceramic Coatings ◽  
X Ray Diffraction ◽  
Abrasive Resistance ◽  
X Ray ◽  
Electrolytic Oxidation ◽  
Microhardness Profile ◽  
Al6061 Alloy ◽  
Plasma Electrolytic ◽  
Phosphate Electrolyte

The ceramic coatings were prepared on the T6-tempered Al6061 alloy substrate under a hybrid voltage by PEO treatment in 5-30 min in a phosphate electrolyte. The X-Ray diffraction (XRD) and scanning electron microscopy (SEM) were used to investigate the coating microstructures. With increasing the PEO treating time, the different compositions of coatings eliminate the sharp slope of the microhardness profile. The coatings PEO-treated in 30min presents excellent abrasive resistance property.

Preparation and Tribological Properties of Graphite-Containing Plasma Electrolytic Oxidation Coatings on Al Alloy

2014 ◽  
Vol 1081 ◽  
pp. 183-186
Author(s):  
Qing Biao Li ◽  
Qing Wang ◽  
Jun Liang
Keyword(s):  
Tribological Properties ◽  
Plasma Electrolytic Oxidation ◽  
Composite Coatings ◽  
Al Alloy ◽  
Constant Voltage ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
X Ray ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic

Graphite-containing plasma electrolytic oxidation (PEO) composite coatings were prepared on Al alloy using periodically constant voltage, with addition of graphite in silicate electrolyte. The surface and cross-sectional morphologies of the coatings were examined using scanning electron microscope (SEM), the composition of the coatings was investigated by X-ray diffraction (XRD) and Raman spectra, the tribological properties of the coatings were evaluated on a tribometer. The results show that friction-reducing PEO composite coatings on Al alloy can be prepared in graphite-dispersed electrolyte using periodically constant voltage, the yielded coatings exhibit relatively lower and more stable friction coefficient.

scholarly journals Comparison of Biocompatible Coatings Produced by Plasma Electrolytic Oxidation on cp-Ti and Ti-Zr-Nb Superelastic Alloy

Coatings ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 401
Author(s):  
Ruzil Farrakhov ◽  
Olga Melnichuk ◽  
Evgeny Parfenov ◽  
Veta Mukaeva ◽  
Arseniy Raab ◽  
...  
Keyword(s):  
Plasma Electrolytic Oxidation ◽  
Electrochemical Impedance ◽  
Pure Titanium ◽  
Commercially Pure Titanium ◽  
X Ray ◽  
Kinetic Coefficients ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic ◽  
Cp Ti ◽  
Peo Coatings

The paper compares the coatings produced by plasma electrolytic oxidation (PEO) on commercially pure titanium and a novel superelastic alloy Ti-18Zr-15Nb (at. %) for implant applications. The PEO coatings were produced on both alloys in the identical pulsed bipolar regime. The properties of the coatings were examined using scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDX), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS). The PEO process kinetics was modeled based on the Avrami theorem and Cottrell equation using a relaxation method. The resultant coatings contain TiO2, for both alloys, and NbO2, Nb2O5, ZrO2 for Ti-18Zr-15Nb alloy. The coating on the Ti-18Zr-15Nb alloy has a higher thickness, porosity, and roughness compared to that on cp-Ti. The values of the kinetic coefficients of the PEO process—higher diffusion coefficient and lower time constant for the processing of Ti-18Zr-15Nb—explain this effect. According to the electrochemical studies, PEO coatings on Ti-18Zr-15Nb alloy provide better corrosion protection. Higher corrosion resistance, porosity, and roughness contribute to better biocompatibility of the PEO coating on Ti-18Zr-15Nb alloy compared to cp-Ti.

scholarly journals Effects of a Carbon Nanotube Additive on the Corrosion-Resistance and Heat-Dissipation Properties of Plasma Electrolytic Oxidation on AZ31 Magnesium Alloy

Materials ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 2438 ◽  
Author(s):  
Myungwon Hwang ◽  
Wonsub Chung
Keyword(s):  
Corrosion Resistance ◽  
Carbon Nanotube ◽  
Plasma Electrolytic Oxidation ◽  
Heat Dissipation ◽  
X Ray ◽  
Steady State Method ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic ◽  
Dissipation Property ◽  
Peo Coatings

Plasma electrolytic oxidation (PEO) coating was obtained on AZ31 Mg alloy using a direct current in a sodium silicate-based electrolyte with and without a carbon nanotube (CNT) additive. The surface morphology and phase composition of the PEO coatings were investigated through field emission scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The corrosion-resistance properties of the PEO coatings were evaluated using potentiodynamic polarization measurements and electrochemical impedance spectroscopy (EIS) in a 3.5 wt.% NaCl solution. Furthermore, the heat-dissipation property was evaluated by a heat-flux measurement setup using a modified steady-state method and Fourier transform infrared spectroscopy (FT-IR). The results demonstrate that, by increasing the concentration of CNT additive in the electrolyte, the micropores and cracks of the PEO coatings are greatly decreased. In addition, the anticorrosion performance of the PEO coatings that incorporated CNT for the protection of the Mg substrate was improved. Finally, the coating’s heat-dissipation property was improved by the incorporation of CNT with high thermal conductivity and high thermal emissivity.

Sign in / Sign up

Export Citation Format

Share Document