Experimental Studies on Metamorphism of Crustal Rocks Under Mantle Pressures

1988 ◽  
Vol 52 (364) ◽  
pp. 1-26 ◽  
Author(s):  
Werner Schreyer

AbstractMetamorphic rocks of undoubted crustal origin have been described in recent years, principally from Mediterranean collision zones that have been subjected to PT conditions along very low geothermal gradients (∼ 7°C/km) and have reached pressures up to 30 kbar. MgAl-rich metapelites develop particularly diagnostic high-pressure minerals and mineral assemblages that have been and are being studied experimentally in model systems involving the components K2O, MgO, Al2O3, TiO2, SiO2, P2O5, and H2O up to pressures of 50 kbar and temperatures of 1000°C.In the present review the following synthetic phases and phase assemblages are discussed, emphasizing their water-pressure-temperature stability fields (approximated in parentheses here), their reaction relationships, and their known or potential occurrences in metamorphic rocks. Sudoite (0 to ∼ 12 kbar, 150? to 380°C) occurs in very low-grade metapelites. Mg-carpholite (∼ 7 to ∼ 45 kbar, ∼ 200 to 600°C) is found in subducted metabauxites, metapelites, and related quartz veins. Mg-chloritoid (18 to 45 kbar?; 400 to 760°C) has not been found in nature as pure or nearly pure end-member; it requires silica-deficient environments. Yoderite, known in nature only from a single talc-kyanite schist occurrence, has only a small stability field (9 to 18 kbar?, 700 to 870°C?), cannot coexist with quartz, but may be stabilized by Fe3+. Pyrope (∼ 15 to at least 50 kbar, ∼ 700°C to melting), with or without relic coesite inclusions, occurs spectacularly in quartzites. Mg-staurolite (∼ 14 to some 90 kbar?, 700 to 1000°C), recently discovered as inclusions in pyrope, requires silica-deficiency. MgMgAl-pumpellyite is a new synthetic phase in which Mg totally replaces Ca of normal pumpellyite; because of its very high-pressure, low-temperature stability (∼ 37 to at least 55 kbar, < 400 to 780°C) it may not form within our globe. Ellenbergerite, the new high-pressure mineral forming inclusions in pyrope, apparently exhibits a rather composition-dependent stability with Ti-ellenbergerite, requiring higher pressures (> 20 kbar) than P-bearing, Ti-free members; a pure hydrous Mg-phosphate with ellenbergerite structure was synthesized at 10 kbar. Phengites, the widespread MgSi-substituted muscovites, require increasingly high water pressures (up to ∼ 20 kbar) for higher degrees of substitution, but the Al-celadonite end-member is not stable under any conditions; the compositions of phengites coexisting with limiting assemblages such as phlogopite, K-feldspar, and an SiO2 phase are useful geobarometers. The common assemblage Mg-chlorite + Al2SiO5 (mainly kyanite) has an extensive stability field ranging from near zero to 31 kbar at temperatures varying from some 320 to ∼ 760°C depending on pressure. The whiteschist assemblage talc + kyanite (6 to ∼ 45 kbar, 550 to 810°C) plays an important role in collision zone metamorphism as it forms from the greenschist assemblage chlorite + quartz at low grades but is also known to break down into pyrope + coesite at the highest grade observed thus far. The assemblage talc-phengite (11 to at least 35 kbar, 300? to 820°C depending on pressure), on the other hand, is well known from subducted metapelites. At pressures of 15–20 kbar and temperatures of 400–650°C a very K,Mg-rich, siliceous fluid forms as a consequence of the mutual reaction of the minerals K-feldspar and phlogopite (biotite) which are very common in crustal rocks including granites. Such fluids are bound to cause metasomatism in neighbouring mantle rocks which, upon subsequent increase of temperature, produce post-collisional ultrapotassic, lamproitic melts.

1988 ◽  
Vol 25 (3) ◽  
pp. 433-441 ◽  
Author(s):  
Moira Smith

The northwestern Cascades structural province can be interpreted as an accretionary complex comprising fault-bounded blocks of pre-Tertiary metamorphic rocks of diverse age and lithologic type. This paper documents the deformation in a portion of the Chilliwack Group, a unit in this complex. The Chilliwack Group is a thick sequence of volcaniclastic sedimentary rocks, calc-alkaline volcanic rocks, and limestone that is metamorphosed to low-grade blueschist facies. The rocks underwent ductile deformation during a Late Cretaceous orogenic event, producing a subhorizontal foliation and, in appropriate lithologies, subhorizontal stretching lineations that trend N20°W. Finite strain sustained by coarse clastic rocks produced RXZ values averaging 3.5. The deformation at least partially postdates the high pressure metamorphic event, based on the presence of bent and broken high-pressure mineral grains. Although early studies postulated west-vergent thrust imbrication of units in the northwest Cascades, the N20°W direction of apparent elongation in the Chilliwack Group, consistent with the direction of motion along segments of the Shuksan fault elucidated in other more recent studies, may reflect significant, highly oblique components of convergence during formation of the western North Cascades collisional orogen.


2013 ◽  
Vol 33 (3) ◽  
pp. 633-641 ◽  
Author(s):  
A. Friedrich ◽  
W. Morgenroth ◽  
L. Bayarjargal ◽  
E. A. Juarez-Arellano ◽  
B. Winkler ◽  
...  

2019 ◽  
Vol 104 (11) ◽  
pp. 1656-1662
Author(s):  
Earl F. O'Bannon ◽  
Quentin Williams

Abstract Topaz [Al2SiO4(F,OH)2] is a subduction-related mineral that is found in metasediments and has a large pressure and temperature stability field. Here, we use luminescence spectroscopy of Cr3+ to probe the Al site in topaz at pressures up to ~60 GPa, which corresponds to a depth of ~1400 km in the Earth. This technique allows us to probe all three unique Al environments (i.e., [AlO4(OH)2]7–, [AlO4(F)2]7–, and [AlO4OH,F]7–) simultaneously under high pressure. We find that the R-line luminescence from all three Al environments shift linearly to longer wavelength to ~40 GPa. Above ~40 GPa, they shift nonlinearly and begin to flatten out at ~48 GPa, with a pressure shift of ~0 cm–1/GPa from ~48–55 GPa. Our results, combined with previous high-pressure single-crystal X-ray diffraction studies to ~45 GPa, strongly indicate that there is a change in the compression mechanism in topaz above ~40 GPa. Our high-pressure room-temperature results show that the metastable persistence of topaz on compression represents one of the most extreme cases among tetrahedrally coordinated silicates.


1983 ◽  
Vol 47 (343) ◽  
pp. 153-160 ◽  
Author(s):  
G. A. Jenner ◽  
D. H. Green

AbstractPyroxene phase relations in the Mg-rich corner of the pyroxene quadrilateral, at 1 atmosphere, have been reinvestigated. Experimental studies on sixteen selected compositions in the systems CMS and CFMS were undertaken in the temperature range 1100–1400 °C. The results of this study clarify our understanding of the pyroxene stability relations at low pressure. In particular, the demonstration that there is a high-temperature stability field of orthoenstatite denies the existence of a stable (or real) invariant point defined by the reactions OE = PE + DI, PE + DI = PI, and OE + DI = PI, in the system CaMgSi2O6-Mg2Si2O6. New phase relations, consistent with the experimental findings of this and other studies, for the Mg-rich corner of the pyroxene quadrilateral are presented. These new phase relations may be of use in interpreting the origin of volcanic rocks containing magnesian pigeonite.


1998 ◽  
Vol 62 (6) ◽  
pp. 869-876 ◽  
Author(s):  
H.-J. Massonne ◽  
F. Hervé ◽  
O. Medenbach ◽  
V. Muñoz ◽  
A. P. Willner

AbstractZussmanite KFe13[AlSi17O42](OH)14, a modulated 2:1 layer silicate, has so far been found only in iron-rich metasediments from Laytonville, California (Agrellet al.), 1965). A new occurrence is reported here from Punta Nihue north of Valdivia, Chile, in banded stilpnomelane-schists. These are intercalated in the ‘Western Series’, a complex of low-grade metamorphic rocks with local high-pressure, low-temperature overprint (e.g. blueschists).The rock contains conspicuous porphyroblasts of zussmanite of mm size and is composed of chemically distinct bands with the subsequent assemblages: (1) zussmanite-stilpnomelane-quartz, (2) siderite-quartz±stilpnomelane (3) apatite-stilpnomelane-quartz±siderite. The chemical composition of zussmanite, (K0.80Na0.05Ba0.01)(Fe11.292+Mg1.11Mn0.25Fe0.143+Cr0.01Al0.19Ti0.01)[Al1.23Si16.77O42](OH)14, its optical properties and X-ray data correlate well with the Californian occurrence. Additionally, we present new IR data. In type (2) bands of fine-grained crystals of a K,Al poor mineral formed from siderite and quartz. Its chemical composition is close to that of zussmanite. A similar phase was also reported from Laytonville, California (Muir Wood, 1980).The rarity of rock-forming zussmanite can be explained by its occurrence in strongly Fe-rich and reduced rocks, as well as, by a possibly narrowP-Tstability field.


2011 ◽  
Vol 78 (4) ◽  
Author(s):  
K. Kluz ◽  
E. S. Geskin

The work presented investigates numerically and experimentally a formation of high velocity liquid projectiles in the course of the unsteady water acceleration by gaseous products of a propellant combustion. The projectiles were generated in a water launcher, a cylindrical enclosure entailed with a tapered converging nozzle. Previous studies demonstrated that liquid projectiles could be utilized as forming, microforming, welding, and boring tools. It is expected that other applications, such as detonation free explosive neutralization or emission-free coal combustion, are also possible. While the effectiveness of a water projectile is determined directly by its velocity, the principal constraint of the proposed technology is water pressure developed in the launcher. Numerical and experimental studies of the correlation between the water pressure and projectile velocity were performed. The work involved application of a computational fluid dynamics (CFD) package, strain gauge tests, and direct measurement of water projectile velocity. Several assumptions were made for the development of a numerical procedure. The behavior of propellant combustion products, at the pressure approaching 1 GPa, was approximated by the Noble–Abel equation, and the process is assumed to be adiabatic. Moreover, the formalism of the equilibrium thermodynamics is applied to a high pressure (∼1 GPa) supersonic fluid flow. Recorded enclosure strains and projectile velocities confirmed the practical accuracy of the numerical method applied. The major finding of this study is the influence of traveling compression waves on water pressure developed in the barrel and projectile exit velocity. The high pressure, cyclically amplified by wave processes, is a significant engineering obstacle compromising durability of the system.


2006 ◽  
Vol 43 (12) ◽  
pp. 1755-1776 ◽  
Author(s):  
E Mposkos ◽  
A Krohe

The ultra-high-pressure (UHP) Kimi complex (uppermost eastern Rhodope Mountains) is a tectonic mixture of crustal and mantle derived associations. Pressure–temperature (P–T) paths and microtextural and geochronological data reveal that crustal and mantle parts juxtaposed against each other at a depth corresponding to ~15 kbar (1 kbar = 100 MPa) had separate ascend histories. The crustal rocks comprise amphibolitised eclogites, orthogneisses, marbles, and migmatitic pelitic gneisses. The latter document UHP metamorphism within the dehydration-melting range of pelitic gneisses, with maximum P–T conditions of >45 kbar at ~1000 °C, as determined by diamond inclusions in garnet and rutile needle exsolutions in Na-bearing garnet. Decompression was combined with only little cooling before 15 kbar, followed by more significant cooling between 15 and 10 kbar. This P–T path probably reflects ascent of UHP rocks within a subduction channel, followed by accretion in the lower crust of a thickened wedge. Although the first ascend phase was probably rapid, the overall time span for UHP metamorphism and final exhumation may have extended over more than 70 Ma. A U–Pb sensitive high-resolution ion microprobe (SHRIMP) age on zircons of ±149 Ma was suggested to date the UHP metamorphism, whereas Rb–Sr white mica and U–Pb zircon ages from syn-shearing pegmatites of ±65 Ma constrain medium- to low-grade shearing and final exhumation of UHP rocks. Mantle parts consisting of spinel–garnet metaperidotites and garnet pyroxenites reached maximum P–T conditions in the garnet-peridotite field at T > 1200 °C and P > 25 kbar. This was associated with plastic flow and followed by severe near isothermal cooling to T < 800 °C at 15 kbar and static annealing. A garnet–clinopyroxene whole-rock Sm–Nd age from a garnet pyroxenite of ±119 Ma probably reflects the age of metamorphic mantle processes (static annealing following the high P/high T strain episode), rather than constraining the age of UHP metamorphism.


1999 ◽  
Vol 63 (4) ◽  
pp. 489-501 ◽  
Author(s):  
S. W. Faryad ◽  
G. Hoinkes

AbstractLow-grade metamorphic rocks from the Meliata unit (Western Carpathians) are characterized by the presence of typical blueschist-facies minerals. In metabasalt, an early low-pressure assemblage (<0.5 GPa at 350°C characterized by muscovite and zoisite, is followed by high-pressure glaucophane, phengite, Na-pyroxene, chlorite, clinozoisite and Al-poor titanite, indicating pressures of >1.2 GPa at 450°C Na-pyroxene shows strong compositional variations between the end-members Jd4–70, Aeg10–49 and Q17–49, respectively. Phengite has high Si content of 3.5 a.p.f.u. The zoisite with Al2Fe (100[Fetot/(−2+Altot+Fetot)]) = 3–5%, is rimmed by clinozoisite, with a maximum of 75% Al2Fe, as well as being enclosed by glaucophane. The occurrence of clinozoisite, rimming zoisite, suggests that the transformation of orthorhombic to monoclinic epidote depends not only on the temperature but also on the pressure. In the studied metabasalt, retrograde phases reflecting greenschist-facies conditions are albite and chlorite. Some neighbouring metabasites may additionally contain actinolite and biotite.


Author(s):  
Gejing Li ◽  
D. R. Peacor ◽  
D. S. Coombs ◽  
Y. Kawachi

Recent advances in transmission electron microscopy (TEM) and analytical electron microscopy (AEM) have led to many new insights into the structural and chemical characteristics of very finegrained, optically homogeneous mineral aggregates in sedimentary and very low-grade metamorphic rocks. Chemical compositions obtained by electron microprobe analysis (EMPA) on such materials have been shown by TEM/AEM to result from beam overlap on contaminant phases on a scale below resolution of EMPA, which in turn can lead to errors in interpretation and determination of formation conditions. Here we present an in-depth analysis of the relation between AEM and EMPA data, which leads also to the definition of new mineral phases, and demonstrate the resolution power of AEM relative to EMPA in investigations of very fine-grained mineral aggregates in sedimentary and very low-grade metamorphic rocks.Celadonite, having end-member composition KMgFe3+Si4O10(OH)2, and with minor substitution of Fe2+ for Mg and Al for Fe3+ on octahedral sites, is a fine-grained mica widespread in volcanic rocks and volcaniclastic sediments which have undergone low-temperature alteration in the oceanic crust and in burial metamorphic sequences.


Sign in / Sign up

Export Citation Format

Share Document