scholarly journals Characteristics of relocated hypocenters of the 2018 M6.7 Hokkaido Eastern Iburi earthquake and its aftershocks with a three-dimensional seismic velocity structure

2019 ◽  
Vol 71 (1) ◽  
Author(s):  
Saeko Kita
Keyword(s):  
Seismic Velocity ◽  
Three Dimensional ◽  
Double Difference ◽  
Earthquake Catalog ◽  
Seismic Structure ◽  
Depth Limit ◽  
High Attenuation ◽  
South Central ◽  
Collision Zone ◽  
Hidaka Collision Zone

AbstractI relocated the hypocenters of the 2018 M6.7 Hokkaido Eastern Iburi earthquake and its surrounding area, using a three-dimensional seismic structure, the double-difference relocation method, and the JMA earthquake catalog. After relocation, the focal depth of the mainshock became 35.4 km. As previous studies show, in south-central Hokkaido, the Hidaka collision zone is formed, and anomalous deep and thickened forearc crust material is subducting at depths of less than 70 km. The mainshock and its aftershocks are located at depths of approximately 10 to 40 km within the lower crust of the anomalous deep and thickened curst near the uppermost mantle material intrusions in the northwestern edge of this Hidaka collision zone. Like the two previous large events, the aftershocks of this event incline steeply eastward and appear to be distributed in the deeper extension of the Ishikari-teichi-toen fault zone. The highly inclined fault in the present study is consistent with a fault model by a geodetic analysis with InSAR. The aftershocks at depths of 10 to 20 km are located at the western edge of the high-attenuation (low-Qp) zone. These kinds of relationships between hypocenters and materials are the same as the 1970 and 1982 events in the Hidaka collision zone. The anomalous large focal depths of these large events compared with the average depth limit of inland earthquakes in Japan could be caused by the locally lower temperature in south-central Hokkaido. This event is one of the approximately M7 large inland earthquakes that occurred repeatedly at a recurrence interval of approximately 40 years and is important in the collision process in the Hidaka collision zone.

scholarly journals Electrical resistivity modeling around the Hidaka collision zone, northern Japan: regional structural background of the 2018 Hokkaido Eastern Iburi earthquake (Mw 6.6)

2019 ◽  
Vol 71 (1) ◽  
Author(s):  
Hiroshi Ichihara ◽  
Toru Mogi ◽  
Hideyuki Satoh ◽  
Yusuke Yamaya
Keyword(s):  
Three Dimensional ◽  
High Resistivity ◽  
Reverse Fault ◽  
Magnetotelluric Data ◽  
Epicentral Area ◽  
Collision Zone ◽  
Conductive Zone ◽  
Significant Area ◽  
Resistivity Model ◽  
Hidaka Collision Zone

Abstract The Hidaka collision zone, the collision boundary between the NE Japan and Kurile arcs, is known to be an ideal region to study the evolution of island arcs. The hypocenter of the 2018 Hokkaido Eastern Iburi earthquake (Mw 6.6) in the western part of the Hidaka collision zone was unusually deep for an inland earthquake, and the reverse fault that caused the earthquake has an uncharacteristically steep dip. In this study, we used three-dimensional inversion to reanalyze broadband magnetotelluric data acquired in the collision zone. The inverted resistivity model showed a significant area of high resistivity around the center of the collision boundary. We also identified a conductive zone beneath an area of serpentinite mélange in a zone of high P–T metamorphic rocks west of the high-resistivity zone. The conductive zone possibly reflects areas rich in pore fluids related to the formation and elevation of the serpentinites. Sensitivity tests indicated the need for additional magnetotelluric survey data to delineate the resistivity distribution around the epicentral area of the 2018 earthquake although the resistivity model showed a conductive zone in this area.

Seismotectonic evidence for subduction beneath the Eastern Greater Caucasus

2020 ◽  
Vol 224 (3) ◽  
pp. 1825-1834
Author(s):  
Michael Gunnels ◽  
Gurban Yetrimishli ◽  
Sabina Kazimova ◽  
Eric Sandvol
Keyword(s):  
Caspian Sea ◽  
Velocity Structure ◽  
Seismic Velocity ◽  
Double Difference ◽  
Mountain Range ◽  
Seismic Structure ◽  
The Caspian Sea ◽  
Study Region ◽  
Greater Caucasus ◽  
Velocity Models

SUMMARY We generated high-resolution 3-D seismic velocity models as well as a relocated earthquake catalogue across the eastern Greater Caucasus and Kura basins. This work was done using data from the recently upgraded Republic Seismological Survey Center's (RSSC) seismic network. We generated our tomographic images of crustal velocity structure in Azerbaijan using double-difference inversions (i.e. tomoDD and hypoDD). Earthquake catalogues from the RSSC between 2011 and 2016 were used; these catalogues include absolute arrival times of 103 288 P- and 120 952 S-wave traveltime picks for 7574 events recorded at 35 stations in Azerbaijan. Beginning with a layered, 1-D velocity model that was estimated using VELEST, we inverted simultaneously for relative location, Vp and Vs on a 3-D grid with dimensions 670 × 445 × 45 km, with a uniform grid spacing of 55 × 55 × 5 km for all of Azerbaijan. We observe that the relocated hypocentres cluster into two depth ranges, at the surface and at depth, that appear to correspond to major fault zones and the top of a subducting plate. Additionally, we note intermediate depth seismicity (∼50–60 km) beneath the Kura Basin, and a northward deepening of earthquake depths. Seismic velocities vary significantly throughout the study region; we observe very slow velocities throughout the Kura Basin between 5 and 15 km, and elevated velocities at 20–35 km. The wholesale velocity structure and seismic structure of Kura Basin strongly mirrors that of the Caspian Sea, which suggests that the geodynamics of the Caspian continue westwards into Azerbaijan. The key results of this study suggest that the northward subduction observed in the Caspian Sea continues beneath the Eastern Greater Caucasus, as well as provides evidence for active faulting along the southern margin of the mountain range.

scholarly journals Compressional and EM wave velocity anisotropy in a temperate glacier due to basal crevasses, and implications for water content estimation

2013 ◽  
Vol 54 (64) ◽  
pp. 168-178 ◽  
Author(s):  
John H. Bradford ◽  
Joshua Nichols ◽  
Joel T. Harper ◽  
Toby Meierbachtol
Keyword(s):  
Water Content ◽  
Seismic Velocity ◽  
Three Dimensional ◽  
Compressional Wave ◽  
P Wave ◽  
Velocity Anisotropy ◽  
South Central ◽  
Glacier Flow ◽  
Ground Penetrating ◽  
Wave Normal

AbstractWe have conducted a series of experiments designed to investigate elastic and electromagnetic (EM) velocity anisotropy associated with a preferentially aligned fracture system on a temperate valley glacier in south-central Alaska, USA. Measurements include a three-dimensional compressional wave (P-wave) seismic reflection survey conducted over a 300 m x 300 m survey patch, with uniform source grid and static checkerboard receiver pattern. Additionally, we acquired a multi-azimuth, multi-offset, polarimetric ground-penetrating radar (GPR) reflection experiment in a wagon-wheel geometry with 94° of azimuthal coverage. Results show azimuthal variation in the P-wave normal-moveout velocity of >3% (3765 and 3630 m s–1in the fast and slow directions respectively) and difference of nearly 5% between the fast (0.164 m ns–1) and slow (0.156 m ns–1) EM velocities. Fracture orientations estimated from the GPR and seismic velocity data are consistent and indicate a preferred fracture orientation that is 30-45° oblique to glacier flow; these measurements agree with borehole observations. Anisotropic analysis of the polarimetric data gives a single volumetric water content estimate of 0.73 ±0.11%. We conclude that meaningful estimates of physical properties in glaciers based on EM or seismic velocity measurements require collecting data such that the presence of anisotropy can be evaluated and an anisotropic analysis employed when necessary.

scholarly journals Long Short-Term Memory Networks for Pattern Recognition of Synthetical Complete Earthquake Catalog

2021 ◽  
Vol 13 (9) ◽  
pp. 4905
Author(s):  
Chen Cao ◽  
Xiangbin Wu ◽  
Lizhi Yang ◽  
Qian Zhang ◽  
Xianying Wang ◽  
...  
Keyword(s):  
Pattern Recognition ◽  
Short Term Memory ◽  
Three Dimensional ◽  
Earthquake Risk ◽  
Earthquake Activity ◽  
Earthquake Catalog ◽  
Short Term ◽  
Term Memory ◽  
Earthquake Migration ◽  
Long Short Term Memory

Exploring the spatiotemporal distribution of earthquake activity, especially earthquake migration of fault systems, can greatly to understand the basic mechanics of earthquakes and the assessment of earthquake risk. By establishing a three-dimensional strike-slip fault model, to derive the stress response and fault slip along the fault under regional stress conditions. Our study helps to create a long-term, complete earthquake catalog. We modelled Long-Short Term Memory (LSTM) networks for pattern recognition of the synthetical earthquake catalog. The performance of the models was compared using the mean-square error (MSE). Our results showed clearly the application of LSTM showed a meaningful result of 0.08% in the MSE values. Our best model can predict the time and magnitude of the earthquakes with a magnitude greater than Mw = 6.5 with a similar clustering period. These results showed conclusively that applying LSTM in a spatiotemporal series prediction provides a potential application in the study of earthquake mechanics and forecasting of major earthquake events.

scholarly journals Seismic Structure of Local Crustal Earthquakes beneath the Zipingpu Reservoir of Longmenshan Fault Zone

2011 ◽  
Vol 2011 ◽  
pp. 1-6 ◽  
Author(s):  
Haiou Li ◽  
Xiwei Xu ◽  
Wentao Ma ◽  
Ronghua Xie ◽  
Jingli Yuan ◽  
...  
Keyword(s):  
Fault Zone ◽  
Three Dimensional ◽  
P Wave ◽  
The Tibetan Plateau ◽  
Seismic Structure ◽  
Infiltration Depth ◽  
Low Velocity ◽  
Longmenshan Fault Zone ◽  
Velocity Models ◽  
Longmenshan Fault

Three-dimensional P wave velocity models under the Zipingpu reservoir in Longmenshan fault zone are obtained with a resolution of 2 km in the horizontal direction and 1 km in depth. We used a total of 8589 P wave arrival times from 1014 local earthquakes recorded by both the Zipingpu reservoir network and temporary stations deployed in the area. The 3-D velocity images at shallow depth show the low-velocity regions have strong correlation with the surface trace of the Zipingpu reservoir. According to the extension of those low-velocity regions, the infiltration depth directly from the Zipingpu reservoir itself is limited to 3.5 km depth, while the infiltration depth downwards along the Beichuan-Yingxiu fault in the study area is about 5.5 km depth. Results show the low-velocity region in the east part of the study area is related to the Proterozoic sedimentary rocks. The Guanxian-Anxian fault is well delineated by obvious velocity contrast and may mark the border between the Tibetan Plateau in the west and the Sichuan basin in the east.

scholarly journals Structure-controlled asperities of the 1920 Haiyuan M8.5 and 1927 Gulang M8 earthquakes, NE Tibet, China, revealed by high-resolution seismic tomography

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Quan Sun ◽  
Shunping Pei ◽  
Zhongxiong Cui ◽  
Yongshun John Chen ◽  
Yanbing Liu ◽  
...  
Keyword(s):  
High Resolution ◽  
Seismic Tomography ◽  
High Velocity ◽  
Three Dimensional ◽  
Large Earthquake ◽  
Velocity Model ◽  
Tectonic Stress ◽  
Double Difference ◽  
Source Regions ◽  
Large Earthquakes

AbstractDetailed crustal structure of large earthquake source regions is of great significance for understanding the earthquake generation mechanism. Numerous large earthquakes have occurred in the NE Tibetan Plateau, including the 1920 Haiyuan M8.5 and 1927 Gulang M8 earthquakes. In this paper, we obtained a high-resolution three-dimensional crustal velocity model around the source regions of these two large earthquakes using an improved double-difference seismic tomography method. High-velocity anomalies encompassing the seismogenic faults are observed to extend to depths of 15 km, suggesting the asperity (high-velocity area) plays an important role in the preparation process of large earthquakes. Asperities are strong in mechanical strength and could accumulate tectonic stress more easily in long frictional locking periods, large earthquakes are therefore prone to generate in these areas. If the close relationship between the aperity and high-velocity bodies is valid for most of the large earthquakes, it can be used to predict potential large earthquakes and estimate the seismogenic capability of faults in light of structure studies.

Three-dimensional seismic structure of the lithosphere under Montana Lasa

1976 ◽  
Vol 66 (2) ◽  
pp. 501-524
Author(s):  
Keiiti Aki ◽  
Anders Christoffersson ◽  
Eystein S. Husebye
Keyword(s):  
Generalized Inverse ◽  
Random Medium ◽  
Three Dimensional ◽  
P Wave ◽  
Seismic Structure ◽  
Low Velocity ◽  
Medium Theory ◽  
Velocity Anomaly ◽  
Inversion Techniques ◽  
Teleseismic Events

abstract Using P-wave residuals for teleseismic events observed at the Montana Large Aperture Seismic Array (LASA), we have determined the three-dimensional seismic structure of the lithosphere under the array to a depth of 140 km. The root-mean-square velocity fluctuation was found to be at least 3.2 per cent which may be compared to estimate of ca. 2 per cent based on the Chernov random medium theory. The solutions are given by both the generalized inverse and stochastic inverse methods in order to demonstrate the relative merit of different inversion techniques. The most conspicuous feature of the lithosphere under LASA is a low-velocity anomaly in the central and northeast part of the array siting area with the N60°E trend and persisting from the upper crust to depths greater than 100 km. We interpret this low-velocity anomaly as a zone of weakness caused by faulting and shearing associated with the building of the Rocky Mountains.

Sign in / Sign up

Export Citation Format

Share Document