scholarly journals Monitoring the fate of injected CO2 using geodetic techniques

2020 ◽  
Vol 39 (1) ◽  
pp. 29-37 ◽  
Author(s):  
Donald W. Vasco ◽  
Timothy H. Dixon ◽  
Alessandro Ferretti ◽  
Sergey V. Samsonov
Keyword(s):  
Oil Recovery ◽  
Surface Deformation ◽  
Cost Effective ◽  
Time Lapse ◽  
Geologic Sequestration ◽  
Geophysical Field ◽  
Long Term Storage ◽  
Sampling Intervals ◽  
Frequent Sampling ◽  
Pressure Changes

Geodetic methods comprise one class of geophysical data that are sensitive to changes in effective pressure within operating reservoirs, albeit indirectly through induced deformation. Geodetic observations, which have observation intervals that vary from seconds to days, weeks, or months, generally provide more frequent sampling compared to existing geophysical methodologies (such as seismic time-lapse monitoring), which typically invoke repeat times of months to years. These differences in sampling intervals are primarily due to the extensive effort, and hence cost, of conducting geophysical field operations, which often precludes executing a large number of surveys. Satellite-based interferometric synthetic aperture radar (InSAR) is cost effective and used in many applications, including monitoring the injection of carbon dioxide (CO2) for both long-term storage and enhanced oil production. An application to the geologic sequestration of CO2 in Algeria revealed northwest migration along a fault/fracture zone intersected by the injection well. A study in a Texas field demonstrated that enhanced oil recovery utilizing CO2 leads to observable surface deformation that may be used to characterize the sequestered CO2 and to estimate the pressure changes within the reservoir induced by injection and production.

Technologies for Advancing Offshore Enhanced Oil Recovery Capabilities

2021 ◽  
Author(s):  
Elena Subia Melchert ◽  
Roy Clayton Long
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Carbon Capture ◽  
Cost Effective ◽  
Department Of Energy ◽  
Life Extension ◽  
Data Sets ◽  
Offshore Platforms ◽  
Long Term Storage ◽  
Readiness Level

Abstract Last year the Department of Energy (DOE) presented a description of the expansion of its research portfolio from one focused on research primarily for onshore applications to one that includes projects specifically for offshore application. That paper (OTC - 30469-MS) also included key research results for the portfolio beginning with projects initiated in 2007. This paper follows on that theme and presents an overview of the Department's current research portfolio focusing on recent-past learnings, current learnings, and research gaps identified from the projects in the current research portfolio 2017-2023. Discussion includes projects that are sponsored by the Department as part of its public-private partnerships with principal investigators from industry and academia, and those projects sponsored by the Department at its National Laboratories. The discussion also includes an overview of activities and projects jointly pursued by DOE and the Department of the Interior's Bureau of Safety and Environmental Enforcement (BSEE) pursuant to the July 2020 Memorandum of Collaboration signed by both agencies. Major insights presented in this paper focus on innovative mid-Technology Readiness Level (mid-TRL) technologies that will enable cost-effective enhanced oil recovery in deepwater and ultra-deepwater including insights for cement and wellbore integrity, flow assurance, life extension of offshore platforms and risers, sensors and telecommunications, early kick detection, chemical delivery, data analytics involving big data sets and modeling, and advanced sensors for EOR operations. Many of the projects reviewed in this paper are part of the portfolio of projects that are sponsored by the Department at the National Laboratories while at the same time includes projects that are cost-shared with private sector and research partners in academia. The breadth of the portfolio illustrates the overall approach of the offshore research portfolio especially for enhanced oil recovery. Recently the National Petroleum Council completed a study for the Secretary of Energy titled Meeting the Dual Challenge: A roadmap to at-scale deployment of carbon capture, use, and storage in which the potential for the use and potential long-term storage of CO2 used in enhanced oil recovery is considered for both onshore and offshore settings (NPC 2019).

scholarly journals CO$$_{2}$$ Convection in Hydrocarbon Under Flowing Conditions

2021 ◽  
Author(s):  
Trine S. Mykkeltvedt ◽  
Sarah E. Gasda ◽  
Tor Harald Sandve
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Flow Behavior ◽  
Cost Effective ◽  
Fine Grid ◽  
Cost Effective Method ◽  
Gravity Effects ◽  
Petroleum Resources ◽  
Nearby Point ◽  
Diffusive Processes

AbstractCarbon-neutral oil production is one way to improve the sustainability of petroleum resources. The emissions from produced hydrocarbons can be offset by injecting capture CO$$_{2}$$ 2 from a nearby point source into a saline aquifer for storage or a producing oil reservoir. The latter is referred to as enhanced oil recovery (EOR) and would enhance the economic viability of CO$$_{2}$$ 2 sequestration. The injected CO$$_{2}$$ 2 will interact with the oil and cause it to flow more freely within the reservoir. Consequently, the overall recovery of oil from the reservoir will increase. This enhanced oil recovery (EOR) technique is perceived as the most cost-effective method for disposing captured CO$$_{2}$$ 2 emissions and has been performed for many decades with the focus on oil recovery. The interaction between existing oil and injected CO$$_{2}$$ 2 needs to be fully understood to effectively manage CO$$_{2}$$ 2 migration and storage efficiency. When CO$$_{2}$$ 2 and oil mix in a fully miscible setting, the density can change non-linearly and cause density instabilities. These instabilities involve complex convective-diffusive processes, which are hard to model and simulate. The interactions occur at the sub-centimeter scale, and it is important to understand its implications for the field scale migration of CO$$_{2}$$ 2 and oil. In this work, we simulate gravity effects, namely gravity override and convective mixing, during miscible displacement of CO$$_{2}$$ 2 and oil. The flow behavior due to the competition between viscous and gravity effects is complex, and can only be accurately simulated with a very fine grid. We demonstrate that convection occurs rapidly, and has a strong effect on breakthrough of CO$$_{2}$$ 2 at the outlet. This work for the first time quantifies these effects for a simple system under realistic conditions.

The Mechanism of Flue Gas Injection for Enhanced Light Oil Recovery

2004 ◽  
Vol 126 (2) ◽  
pp. 119-124 ◽  
Author(s):  
O. S. Shokoya ◽  
S. A. (Raj) Mehta ◽  
R. G. Moore ◽  
B. B. Maini ◽  
M. Pooladi-Darvish ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Flue Gas ◽  
Gas Injection ◽  
Cost Effective ◽  
Air Injection ◽  
Oil Reservoirs ◽  
Flue Gases ◽  
Low Permeability ◽  
Light Oil ◽  
Light Oil Reservoirs

Flue gas injection into light oil reservoirs could be a cost-effective gas displacement method for enhanced oil recovery, especially in low porosity and low permeability reservoirs. The flue gas could be generated in situ as obtained from the spontaneous ignition of oil when air is injected into a high temperature reservoir, or injected directly into the reservoir from some surface source. When operating at high pressures commonly found in deep light oil reservoirs, the flue gas may become miscible or near–miscible with the reservoir oil, thereby displacing it more efficiently than an immiscible gas flood. Some successful high pressure air injection (HPAI) projects have been reported in low permeability and low porosity light oil reservoirs. Spontaneous oil ignition was reported in some of these projects, at least from laboratory experiments; however, the mechanism by which the generated flue gas displaces the oil has not been discussed in clear terms in the literature. An experimental investigation was carried out to study the mechanism by which flue gases displace light oil at a reservoir temperature of 116°C and typical reservoir pressures ranging from 27.63 MPa to 46.06 MPa. The results showed that the flue gases displaced the oil in a forward contacting process resembling a combined vaporizing and condensing multi-contact gas drive mechanism. The flue gases also became near-miscible with the oil at elevated pressures, an indication that high pressure flue gas (or air) injection is a cost-effective process for enhanced recovery of light oils, compared to rich gas or water injection, with the potential of sequestering carbon dioxide, a greenhouse gas.

scholarly journals Rediscovering Zygorhizidium affluens Canter: Molecular Taxonomy, Infectious Cycle, and Cryopreservation of a Chytrid Infecting the Bloom-Forming Diatom Asterionella formosa

2018 ◽  
Vol 84 (23) ◽  
Author(s):  
Cecilia Rad-Menéndez ◽  
Mélanie Gerphagnon ◽  
Andrea Garvetto ◽  
Paola Arce ◽  
Yacine Badis ◽  
...  
Keyword(s):  
Molecular Taxonomy ◽  
Cost Effective ◽  
Trophic Levels ◽  
Content Type ◽  
Long Term Storage ◽  
Asterionella Formosa ◽  
Infectious Cycle ◽  
Cryopreservation Method ◽  
Term Storage

ABSTRACT Parasitic Chytridiomycota (chytrids) are ecologically significant in various aquatic ecosystems, notably through their roles in controlling bloom-forming phytoplankton populations and in facilitating the transfer of nutrients from inedible algae to higher trophic levels. The diversity and study of these obligate parasites, while critical to understand the interactions between pathogens and their hosts in the environment, have been hindered by challenges inherent to their isolation and stable long-term maintenance under laboratory conditions. Here, we isolated an obligate chytrid parasite (CCAP 4086/1) on the freshwater bloom-forming diatom Asterionella formosa and characterized its infectious cycle under controlled conditions. Phylogenetic analyses based on 18S, 5.8S, and 28S ribosomal DNAs (rDNAs) revealed that this strain belongs to the recently described clade SW-I within the Lobulomycetales. All morphological features observed agree with the description of the known Asterionella parasite Zygorhizidium affluens Canter. We thus provide a phylogenetic placement for this chytrid and present a robust and simple assay that assesses both the infection success and the viability of the host. We also validate a cryopreservation method for stable and cost-effective long-term storage and demonstrate its recovery after thawing. All the above-mentioned tools establish a new gold standard for the isolation and long-term preservation of parasitic aquatic chytrids, thus opening new perspectives to investigate the diversity of these organisms and their physiology in a controlled laboratory environment. IMPORTANCE Despite their ecological relevance, parasitic aquatic chytrids are understudied, especially due to the challenges associated with their isolation and maintenance in culture. Here we isolated and established a culture of a chytrid parasite infecting the bloom-forming freshwater diatom Asterionella formosa. The chytrid morphology suggests that it corresponds to the Asterionella parasite known as Zygorhizidium affluens. The phylogenetic reconstruction in the present study supports the hypothesis that our Z. affluens isolate belongs to the order Lobulomycetales and clusters within the novel clade SW-I. We also validate a cryopreservation method for stable and cost-effective long-term storage of parasitic chytrids of phytoplankton. The establishment of a monoclonal pathosystem in culture and its successful cryopreservation opens the way to further investigate this ecologically relevant parasitic interaction.

Cost-effective Time Lapse Seismic Based on Direct Transmitted P-waves for Monitoring Sagd Heavy Oil Production

2018 ◽  
Author(s):  
M. Gareev ◽  
M. Amerkhanov ◽  
M. Lyabipov ◽  
A. Stepanov ◽  
R. Sitdikov ◽  
...  
Keyword(s):  
Heavy Oil ◽  
Oil Production ◽  
Cost Effective ◽  
Time Lapse ◽  
P Waves ◽  
Effective Time

Time-lapse CCR survey for a cost effective safety evaluation of river embankments

2018 ◽  
Author(s):  
C. Konishi ◽  
H. Saito ◽  
A. Shinsei ◽  
Y. Yamashita ◽  
T. Kobayashi
Keyword(s):  
Safety Evaluation ◽  
Cost Effective ◽  
Time Lapse

scholarly journals A Cost-Effective Method to Reproduce the Morphology of the Nearshore and Intertidal Zone in Microtidal Environments

2020 ◽  
Vol 12 (11) ◽  
pp. 1880
Author(s):  
Stefano Furlani ◽  
Valeria Vaccher ◽  
Vanja Macovaz ◽  
Stefano Devoto
Keyword(s):  
Intertidal Zone ◽  
Field Tests ◽  
Cost Effective ◽  
Time Lapse ◽  
3D Models ◽  
The North ◽  
Cost Effective Method ◽  
Photogrammetric Method ◽  
The Difference ◽  
Sea Wall

The photogrammetric method is widely used in coastal areas and in submerged environments. Time-lapse images collected with unmanned aerial vehicles are used to reproduce the emerged areas, while images taken by divers are used to reproduce submerged ones. Conversely, 3D models of natural or human-made objects lying at the water level are severely affected by the difference in refractive index between air and seawater. For this reason, the matching of 3D models of emergent and submerged coasts has been very rarely tested and never used in Earth Sciences. The availability of a large number of time-lapse images, collected at the intertidal zone during previous snorkel surveys, encouraged us to test the merging of 3D models of emerged and submerged environments. Considering the rapid and effective nature of the aforementioned program of swim surveys, photogrammetric targets were not used during image acquisition. This forced us to test the matching of the independent models by recognizing prominent landforms along the waterline. Here we present the approach used to test the method, the instrumentation used for the field tests, and the setting of cameras fixed to a specially built aluminum support console and discuss both its advantages and its limits compared to UAVs. 3D models of sea cliffs were generated by applying structure-from-motion (SfM) photogrammetry. Horizontal time-lapse images, collected with action cameras while swimming parallel to the coastline at nearly constant velocity, were used for the tests. Subsequently, prominent coastal landforms were used to couple the independent models obtained from the emergent and submerged cliffs. The method was pilot tested in two coastal sites in the north-eastern Adriatic (part of the Mediterranean basin). The first site was a 25 m sea wall of sandstone set within a small harbor, while the second site was a 150 m route below plunging limestone cliffs. The data show that inexpensive action cameras provide a sufficient resolution to support and integrate geomorphological field surveys along rocky coastlines.

Estimating fluvial wood discharge using time-lapse photography with varying sampling intervals

2014 ◽  
Vol 39 (6) ◽  
pp. 844-852 ◽  
Author(s):  
Natalie Kramer ◽  
Ellen Wohl
Keyword(s):  
Time Lapse ◽  
Sampling Intervals ◽  
Time Lapse Photography

Biosurfactants as demulsifying agents for oil recovery from oily sludge – performance evaluation

2013 ◽  
Vol 67 (12) ◽  
pp. 2875-2881 ◽  
Author(s):  
Evans M. N. Chirwa ◽  
Tshepo Mampholo ◽  
Oluwademilade Fayemiwo
Keyword(s):  
Oil Recovery ◽  
Sodium Dodecyl ◽  
Cost Effective ◽  
Solid Particles ◽  
Second Step ◽  
Oily Sludge ◽  
Waste Sludge ◽  
Complex Interactions ◽  
Oil Water ◽  
Living Organisms

The oil producing and petroleum refining industries dispose of a significant amount of oily sludge annually. The sludge typically contains a mixture of oil, water and solid particles in the form of complex slurry. The oil in the waste sludge is inextractible due to the complex composition and complex interactions in the sludge matrix. The sludge is disposed of on land or into surface water bodies thereby creating toxic conditions or depleting oxygen required by aquatic animals. In this study, a fumed silica mixture with hydrocarbons was used to facilitate stable emulsion (‘Pickering’ emulsion) of the oily sludge. The second step of controlled demulsification and separation of oil and sludge into layers was achieved using either a commercial surfactant (sodium dodecyl sulphate (SDS)) or a cost-effective biosurfactant from living organisms. The demulsification and separation of the oil layer using the commercial surfactant SDS was achieved within 4 hours after stopping mixing, which was much faster than the 10 days required to destabilise the emulsion using crude biosurfactants produced by a consortium of petrochemical tolerant bacteria. The recovery rate with bacteria could be improved by using a more purified biosurfactant without the cells.

Sign in / Sign up

Export Citation Format

Share Document