Time-lapse CCR survey for a cost effective safety evaluation of river embankments

Author(s):  
C. Konishi ◽  
H. Saito ◽  
A. Shinsei ◽  
Y. Yamashita ◽  
T. Kobayashi
Author(s):  
M. Gareev ◽  
M. Amerkhanov ◽  
M. Lyabipov ◽  
A. Stepanov ◽  
R. Sitdikov ◽  
...  

2020 ◽  
Vol 12 (11) ◽  
pp. 1880
Author(s):  
Stefano Furlani ◽  
Valeria Vaccher ◽  
Vanja Macovaz ◽  
Stefano Devoto

The photogrammetric method is widely used in coastal areas and in submerged environments. Time-lapse images collected with unmanned aerial vehicles are used to reproduce the emerged areas, while images taken by divers are used to reproduce submerged ones. Conversely, 3D models of natural or human-made objects lying at the water level are severely affected by the difference in refractive index between air and seawater. For this reason, the matching of 3D models of emergent and submerged coasts has been very rarely tested and never used in Earth Sciences. The availability of a large number of time-lapse images, collected at the intertidal zone during previous snorkel surveys, encouraged us to test the merging of 3D models of emerged and submerged environments. Considering the rapid and effective nature of the aforementioned program of swim surveys, photogrammetric targets were not used during image acquisition. This forced us to test the matching of the independent models by recognizing prominent landforms along the waterline. Here we present the approach used to test the method, the instrumentation used for the field tests, and the setting of cameras fixed to a specially built aluminum support console and discuss both its advantages and its limits compared to UAVs. 3D models of sea cliffs were generated by applying structure-from-motion (SfM) photogrammetry. Horizontal time-lapse images, collected with action cameras while swimming parallel to the coastline at nearly constant velocity, were used for the tests. Subsequently, prominent coastal landforms were used to couple the independent models obtained from the emergent and submerged cliffs. The method was pilot tested in two coastal sites in the north-eastern Adriatic (part of the Mediterranean basin). The first site was a 25 m sea wall of sandstone set within a small harbor, while the second site was a 150 m route below plunging limestone cliffs. The data show that inexpensive action cameras provide a sufficient resolution to support and integrate geomorphological field surveys along rocky coastlines.


2015 ◽  
Vol 4 (1) ◽  
pp. 23-34 ◽  
Author(s):  
A. Messerli ◽  
A. Grinsted

Abstract. The use of time-lapse camera systems is becoming an increasingly popular method for data acquisition. The camera setup is often cost-effective and simple, allowing for a large amount of data to be accumulated over a variety of environments for relatively minimal effort. The acquired data can, with the correct post-processing, result in a wide range of useful quantitative and qualitative information in remote and dangerous areas. The post-processing requires a significant amount of steps to transform images into meaningful data for quantitative analysis, such as velocity fields. To the best of our knowledge at present a complete, openly available package that encompasses georeferencing, georectification and feature tracking of terrestrial, oblique images is still absent. This study presents a complete, yet adaptable, open-source package developed in MATLAB, that addresses and combines each of these post-processing steps into one complete suite in the form of an "Image GeoRectification and Feature Tracking" (ImGRAFT: http://imgraft.glaciology.net) toolbox. The toolbox can also independently produce other useful outputs, such as viewsheds, georectified and orthorectified images. ImGRAFT is primarily focused on terrestrial oblique images, for which there are currently limited post-processing options available. In this study, we illustrate ImGRAFT for glaciological applications on a small outlet glacier Engabreen, Norway.


2021 ◽  
Vol 12 ◽  
Author(s):  
Dilip Thomas ◽  
Sushma Shenoy ◽  
Nazish Sayed

Cardiovascular disease (CVD) complications have contributed significantly toward poor survival of cancer patients worldwide. These complications that result in myocardial and vascular damage lead to long-term multisystemic disorders. In some patient cohorts, the progression from acute to symptomatic CVD state may be accelerated due to exacerbation of underlying comorbidities such as obesity, diabetes and hypertension. In such situations, cardio-oncologists are often left with a clinical predicament in finding the optimal therapeutic balance to minimize cardiovascular risks and maximize the benefits in treating cancer. Hence, prognostically there is an urgent need for cost-effective, rapid, sensitive and patient-specific screening platform to allow risk-adapted decision making to prevent cancer therapy related cardiotoxicity. In recent years, momentous progress has been made toward the successful derivation of human cardiovascular cells from induced pluripotent stem cells (iPSCs). This technology has not only provided deeper mechanistic insights into basic cardiovascular biology but has also seamlessly integrated within the drug screening and discovery programs for early efficacy and safety evaluation. In this review, we discuss how iPSC-derived cardiovascular cells have been utilized for testing oncotherapeutics to pre-determine patient predisposition to cardiovascular toxicity. Lastly, we highlight the convergence of tissue engineering technologies and precision medicine that can enable patient-specific cardiotoxicity prognosis and treatment on a multi-organ level.


2020 ◽  
Vol 39 (1) ◽  
pp. 29-37 ◽  
Author(s):  
Donald W. Vasco ◽  
Timothy H. Dixon ◽  
Alessandro Ferretti ◽  
Sergey V. Samsonov

Geodetic methods comprise one class of geophysical data that are sensitive to changes in effective pressure within operating reservoirs, albeit indirectly through induced deformation. Geodetic observations, which have observation intervals that vary from seconds to days, weeks, or months, generally provide more frequent sampling compared to existing geophysical methodologies (such as seismic time-lapse monitoring), which typically invoke repeat times of months to years. These differences in sampling intervals are primarily due to the extensive effort, and hence cost, of conducting geophysical field operations, which often precludes executing a large number of surveys. Satellite-based interferometric synthetic aperture radar (InSAR) is cost effective and used in many applications, including monitoring the injection of carbon dioxide (CO2) for both long-term storage and enhanced oil production. An application to the geologic sequestration of CO2 in Algeria revealed northwest migration along a fault/fracture zone intersected by the injection well. A study in a Texas field demonstrated that enhanced oil recovery utilizing CO2 leads to observable surface deformation that may be used to characterize the sequestered CO2 and to estimate the pressure changes within the reservoir induced by injection and production.


Author(s):  
A. Messerli ◽  
A. Grinsted

Abstract. The use of time-lapse camera systems is becoming an increasingly popular method for data acquisition. The camera setup is often cost-effective and simple, allowing for a large amount of data to be accumulated over a variety of environments for relatively minimal effort. The acquired data can, with the correct post-processing, result in a wide range of useful quantitative and qualitative information in remote and dangerous areas. The post-processing requires a significant amount of steps to transform images into meaningful and comparable data, such as velocity data. To the best of our knowledge at present a complete, openly available package that encompasses georeferencing, georectification and feature tracking of terrestrial, oblique images is still absent. This study presents a complete, yet adaptable, open-source package developed in MATLAB, that addresses and combines each of these post-processing steps into one complete suite in the form of an "Image GeoRectification and Feature Tracking" (ImGRAFT: http://imgraft.glaciology.net) toolbox. The toolbox, can also independently produce other useful outputs, such as viewsheds, georectified and orthorectified images. ImGRAFT is primarily focused on terrestrial oblique images, for which there are currently limited post-processing options available. In this study we illustrate ImGRAFT for glaciological applications on a small outlet glacier Engabreen, Norway.


2017 ◽  
Vol 35 (15_suppl) ◽  
pp. e22023-e22023 ◽  
Author(s):  
Karissa N Kusick ◽  
Madeline Waldron ◽  
Anthony Zembillas ◽  
Maya Wai ◽  
Rabi Hanna ◽  
...  

e22023 Background: Aprepitant is an antiemetic that antagonizes the substance P neurokinin-1 receptor. Fosaprepitant is an intravenous prodrug of aprepitant and is FDA-approved for the prevention of chemotherapy-induced nausea and vomiting (CINV) in adults. Although the FDA extended approval of oral aprepitant to children and adolescents for CINV, pediatric patients have challenges obtaining aprepitant due to insurance or have difficulty taking oral medications during chemotherapy. Fosaprepitant is a logical alternative but data are lacking for safe and effective dosing in children. In 2015, fosaprepitant was added to our hospital formulary for pediatric patients receiving moderate to highly emetogenic chemotherapy. The fosaprepitant dose established was 150mg for weight ≥30kg or 3mg/kg/dose for < 30kg. There is also potential for overall cost savings to our institution. Fosaprepitant is about half the cost of aprepitant using equivalent adult doses. Methods: This retrospective chart review was considered exempt from IRB.All pediatric patients who received fosaprepitant between April 2015 and October 2016 while inpatient were included.Patients undergoing bone marrow transplant were excluded from the study.The primary objective was to determine safety of fosaprepitant. To evaluate safety, incidence of infusion related reactions related to fosaprepitant administration were assessed. Secondary objectives include efficacy of fosaprepitant in pediatric patients and evaluation of cost savings. To evaluate efficacy, the use of breakthrough antiemetics, documented emesis, and Adapted Rhodes Index for Nausea and Vomiting score were collected. Descriptive statistics were used for all data analyses on a per cycle basis. Results: A preliminary safety evaluation of 20 patients ages 9 months through 16 years received 87 doses of fosaprepitant for CINV prophylaxis.Six patients < 30kg received weight-based dosing; the other 14 patients received a dose of 150mg.One patient experienced an infusion related reaction from fosaprepitant but symptoms resolved after the infusion was stopped. Conclusions: Fosaprepitant appears to be safe and cost-effective to prevent CINV in children.


2014 ◽  
Vol 7 (3) ◽  
pp. 2783-2825
Author(s):  
H. M. Schulz ◽  
S.-C. Chang ◽  
B. Thies ◽  
J. Bendix

Abstract. A new method for the determination of cloud top heights from the footage of a time-lapse camera is presented. Contact points between cloud tops and underlying terrain are automatically detected in the camera image based on differences in the brightness, texture and movement of cloudy and non-cloudy areas. The height of the detected cloud top positions is determined by comparison with a digital elevation model projected to the view of the camera. The technique has been validated using data about the cloud immersion of a second camera as well as via visual assessment. The validation shows a high detection quality, especially regarding the requirements for the validation of satellite cloud top retrieval algorithms.


PeerJ ◽  
2016 ◽  
Vol 4 ◽  
pp. e2120 ◽  
Author(s):  
William W. Deacy ◽  
William B. Leacock ◽  
Lisa A. Eby ◽  
Jack A. Stanford

Accurately estimating population sizes is often a critical component of fisheries research and management. Although there is a growing appreciation of the importance of small-scale salmon population dynamics to the stability of salmon stock-complexes, our understanding of these populations is constrained by a lack of efficient and cost-effective monitoring tools for streams. Weirs are expensive, labor intensive, and can disrupt natural fish movements. While conventional video systems avoid some of these shortcomings, they are expensive and require excessive amounts of labor to review footage for data collection. Here, we present a novel method for quantifying salmon in small streams (<15 m wide, <1 m deep) that uses both time-lapse photography and video in a model-based double sampling scheme. This method produces an escapement estimate nearly as accurate as a video-only approach, but with substantially less labor, money, and effort. It requires servicing only every 14 days, detects salmon 24 h/day, is inexpensive, and produces escapement estimates with confidence intervals. In addition to escapement estimation, we present a method for estimating in-stream salmon abundance across time, data needed by researchers interested in predator--prey interactions or nutrient subsidies. We combined daily salmon passage estimates with stream specific estimates of daily mortality developed using previously published data. To demonstrate proof of concept for these methods, we present results from two streams in southwest Kodiak Island, Alaska in which high densities of sockeye salmon spawn.


2017 ◽  
Author(s):  
Sarab S. Sethi ◽  
Robert M. Ewers ◽  
Nick S. Jones ◽  
C. David L. Orme ◽  
Lorenzo Picinali

AbstractAutomated methods of monitoring ecosystems provide a cost-effective way to track changes in natural system’s dynamics across temporal and spatial scales. However, methods of recording and storing data captured from the field still require significant manual effort.Here we introduce an open source, inexpensive, fully autonomous ecosystem monitoring unit for capturing and remotely transmitting continuous data streams from field sites over long time-periods. We provide a modular software framework for deploying various sensors, together with implementations to demonstrate proof of concept for continuous audio monitoring and time-lapse photography.We show how our system can outperform comparable technologies for fractions of the cost, provided a local mobile network link is available. The system is robust to unreliable network signals and has been shown to function in extreme environmental conditions, such as in the tropical rainforests of Sabah, Borneo.We provide full details on how to assemble the hardware, and the open-source software. Paired with appropriate automated analysis techniques, this system could provide spatially dense, near real-time, continuous insights into ecosystem and biodiversity dynamics at a low cost.


Sign in / Sign up

Export Citation Format

Share Document