Shaking Table Tests of a Typical Mexican Colonial Temple: Evaluation of Two Retrofitting Techniques

2013 ◽  
Vol 29 (4) ◽  
pp. 1209-1231 ◽  
Author(s):  
Marcos Chávez ◽  
Roberto Meli
Keyword(s):  
Energy Dissipation ◽  
Research Program ◽  
Maximum Intensity ◽  
Shaking Table ◽  
Scale Model ◽  
Stone Masonry ◽  
Significant Source ◽  
Second Phase ◽  
Shaking Table Tests ◽  
Displacement Capacity

This paper reports the results of the second phase of a research program that carried out shaking table tests on a scale model of a typical stone masonry temple. This second phase evaluates the efficacy of two different retrofitting techniques by comparing the response of the retrofitted models with that of the original unreinforced model. It was found that both retrofitting schemes substantially enhanced the performance of the model temple. The maximum intensity of the base motion for which damage was considered to be still repairable increased by 80% and 120% for the first and the second levels of retrofitting, respectively. In terms of displacement capacity, the response of the model with the second level of retrofit reached a maximum drift of 0.4%. The initial damping ratios were found to be in the range of 7% to 9%, both in the original and the retrofitted models. These ratios constitute a significant source of energy dissipation for this kind of structure.

Earthquake induced floor accelerations on a high-rise building: Scale model tests on a shaking table

2021 ◽  
Author(s):  
Fabio Rizzo ◽  
Alessandro Pagliaroli ◽  
Giuseppe Maddaloni ◽  
Antonio Occhiuzzi ◽  
Andrea Prota
Keyword(s):  
Soil Structure ◽  
Shaking Table ◽  
Soil Structure Interaction ◽  
Scale Model ◽  
Structural Elements ◽  
Shaking Table Tests ◽  
Building Model ◽  
High Rise ◽  
High Rise Building ◽  
Story Building

<p>The paper discusses results of shaking table tests on an in-scale high-rise building model. The purpose was to calibrate a dynamic numerical model for multi-hazard analyses to investigate the effects of floor acceleration. Accelerations, because of vibration of non-structural elements, affect both the comfort and safety of people. The research investigates the acceleration effects of both seismic and wind forces on an aeroelastic in-scale model of a multi-story building. The paper discusses the first phase of experiments and gives results of floor accelerations induced by several different base seismic impulses. Structural analyses were first performed on the full-scale prototype to take soil-structure interaction into account. Subsequently the scale model was designed through aeroelastic scale laws. Shaking table experiments were then carried out under different base accelerations. The response of the model and, in particular, amplification of effects from base to top are discussed.</p>

Shaking Table Tests on Multi-Leaf Stone Masonry Structures: Analysis of Stiffness Decay

2010 ◽  
Vol 133-134 ◽  
pp. 647-652 ◽  
Author(s):  
Nicola Mazzon ◽  
Cano M. Chavez ◽  
Maria Rosa Valluzzi ◽  
F. Casarin ◽  
Claudio Modena
Keyword(s):  
Dynamic Behaviour ◽  
Shaking Table ◽  
Stone Masonry ◽  
Mode Shapes ◽  
Masonry Structures ◽  
Shaking Table Tests ◽  
Grout Injection ◽  
Hydraulic Lime ◽  
Natural Hydraulic Lime ◽  
Before And After

The influence of the natural hydraulic lime-based grout on the dynamic behaviour of injected multi-leaf stone masonry elements is discussed in the paper. Shaking table experiments on two stone masonry buildings, tested before and after grout injection, have been performed. The paper focuses on the analysis of both the recorded accelerations and related displacements, at the bottom and at each further storey. This leads to evaluate the stiffness of the unstrengthened and injected structures. The input at increasing PGA allowed the stiffness decay to be studied, simulating a gradual damaging of the structures. These results were also interpreted in the light of both computed frequencies and mode shapes. Finally, the comparison among these results, obtained from all the models, allows to deepen the knowledge concerning the effects induced by the lime-based grout injection and on its capability to modify the dynamic behaviour, when intervening on a damaged (repairing) or on an undamaged (strengthening) structure.

Comparative dynamic investigation of cross-laminated wooden panel systems: Shaking-table tests and analysis

2017 ◽  
Vol 21 (10) ◽  
pp. 1421-1436 ◽  
Author(s):  
Viktor Hristovski ◽  
Violeta Mircevska ◽  
Bruno Dujic ◽  
Mihail Garevski
Keyword(s):  
Energy Dissipation ◽  
Earthquake Engineering ◽  
Dynamic Properties ◽  
Seismic Energy ◽  
Experimental Tests ◽  
Shaking Table ◽  
Shaking Table Tests ◽  
Equivalent Viscous Damping ◽  
Cross Laminated Timber ◽  
Engineering Seismology

Cross-laminated timber has recently gained great popularity in earthquake-prone areas for construction of residential, administrative, and other types of buildings. At the Laboratory of the Institute of Earthquake Engineering and Engineering Seismology in Skopje, comparative full-scale shaking-table tests of cross-laminated timber panel systems have been carried out as a part of the full research program on the seismic behavior of these types of wooden systems, realized by Institute of Earthquake Engineering and Engineering Seismology, Skopje, and the Faculty of Civil and Geodetic Engineering (UL FCG), University of Ljubljana. Two different specimens built of cross-laminated timber panels have been tested: specimen containing a pair of single-unit principal wall elements (Specimen 1) and specimen containing a pair of two-unit principal wall elements (Specimen 2). In this article, the results from the shaking-table tests obtained for Specimen 2 and numerically verified by using appropriate finite element method–based computational model are discussed. Reference is also made to the comparative analysis of the test results obtained for both specimens. One of the most important aspects of the research has been the estimation of the seismic energy-dissipation ability of Specimen 1 and 2, via calculation of the equivalent viscous damping using the performed experimental tests. It is generally concluded that Specimen 2 exhibits a similar rocking behavior as Specimen 1, with similar energy-dissipation ability. Both specimens have manifested slightly different dynamic properties, mostly because Specimen 2 has been designed with one anchor more compared to Specimen 1. Forced vibration tests have been used for identification of the effective stiffness on the contacts for Specimen 2. This research is expected to be a contribution toward clarification of the behavior and practical design of cross-laminated timber panel systems subjected to earthquake loading.

Shaking Table Test on Unreinforced Stone Masonry Pagoda

2012 ◽  
Vol 166-169 ◽  
pp. 730-733 ◽  
Author(s):  
Fei Zhu ◽  
Feng Lai Wang ◽  
Xu Jie Sun ◽  
Y. Zhao
Keyword(s):  
Dynamic Behavior ◽  
Seismic Performance ◽  
Seismic Design ◽  
Shaking Table Test ◽  
Shaking Table ◽  
Cultural Value ◽  
Scale Model ◽  
Stone Masonry ◽  
Experimental Program ◽  
Ancient China

Unreinforced stone masonry pagodas have great cultural value and should be detailed investigation its mechanical properties. These buildings were not designed to resist earthquakes in ancient China, at least not in the way of current methods. The objectives of this research were to understand the dynamic behavior of unreinforced stone masonry pagoda and its seismic performance. To accomplish these, a 1/12 scale model of China Dinosaurs Pagoda was constructed and tested on shaking table. The octangle model height is 3.96m, with aspect ratio of height to width is 2.93, both parameters exceed the stipulated limit of Code for Seismic Design of Building. The model built with the stones and motars similar to the prototype materials and the arrangements. Its dynamic behavior and seismic performance were tested on the shaking table towards the free vibration and three earthquake waves. The experimental program adopted in the research is explained in this paper.

Rc Infilled Frame: Shaking Table Tests on a Full Scale Model

2007 ◽  
Vol 347 ◽  
pp. 285-290
Author(s):  
Elena Candigliota ◽  
Alain Le Maoult
Keyword(s):  
Research Program ◽  
Structural Characteristics ◽  
Seismic Intensity ◽  
Full Scale ◽  
Shaking Table ◽  
Frame Structure ◽  
Scale Model ◽  
Limit States ◽  
Infilled Frame ◽  
Set Up

Tests on shaking table have been carried out on a 3D full scale infilled r.c. frame specimen (55 tons). These tests have been performed by the EMSI Laboratory of C.E.A. Saclay (France) together with a research team of the Universities of Chieti-Pescara (Italy), Roma Tre (Italy) and Patras (Greece). These tests are included in Ecoleader European research program. Many characterization tests of infill components (mortar and bricks) have been performed in the SCAM Laboratory of the University of Chieti-Pescara while tests on masonry walls were made in the laboratory of University of Rome 3. The structure represents the first floor of a two floors frame structure previously tested. The mockup is a full-scale one storey rc infilled frame with four columns, 3 meters high, with about 4 meters side square floor and infilled with double bricks wall. The main aim is to get information about the behavior of real structures. The instrumentation with about one hundred channels was set up to measure the rc frame response and the different behavior of the double walls during the tests. First, monodirectional and bidirectional tests at low seismic intensity (0.10 g and 0.15 g PGA levels) have been performed on the bare frame in order to characterize its structural characteristics and to check the design provisions. Then, the bare frame has been infilled and other tests have carried out at increasing seismic intensity in order to define its serviceability and ultimate limit states. Monodirectional and bidirectional tests up to 0.45 g PGA level were carried out. The last sequence included a monodirectional test on the infilled frame with only two walls. The high seismic input (0.55 g PGA level) was parallel to the direction of the walls. In this paper, research program and some main test results are presented.

Influence of Viscoelastic Dampers on the Seismic Response of a Lightly Reinforced Concrete Flat Slab Structure

1999 ◽  
Vol 15 (4) ◽  
pp. 681-710 ◽  
Author(s):  
John R. Hayes ◽  
Douglas A. Foutch ◽  
Sharon L. Wood
Keyword(s):  
Reinforced Concrete ◽  
Energy Dissipation ◽  
Horizontal Displacement ◽  
Shaking Table ◽  
Scale Model ◽  
Earthquake Simulation ◽  
Flat Slab ◽  
Viscoelastic Dampers ◽  
Seismic Rehabilitation ◽  
Lightly Reinforced Concrete

A 1/3-scale model of a section of a three-story lightly reinforced concrete flat slab structure was constructed. Researchers installed a viscoelastic damper (VED) seismic rehabilitation system on the model and subjected it to seismic simulations on a shaking table. Successive simulations were conducted with increasing base accelerations until the horizontal displacement limit of the shaking table was reached. The dampers were then removed, and the simulations were repeated until structural failure occurred. This paper summarizes the responses of the model. Brief comparisons of the responses of the model with and without VEDs installed are made. The VEDs improved energy dissipation characteristics and serviceability of the structure by reducing interstory displacements. Earthquake simulation responses indicated that the damper configuration that was employed in the experimental investigation permitted rotations of the VEDs, which lowered their energy dissipation efficiency. An alternate arrangement for the VEDs is proposed to alleviate this problem.

Experimental Study on Seismic Failure of High Arch Dam with Scale Model Test on Shaking Table

2013 ◽  
Vol 353-356 ◽  
pp. 2004-2007
Author(s):  
Peng Fei Gao ◽  
Xin Feng ◽  
Jing Zhou
Keyword(s):  
Shaking Table Test ◽  
Failure Process ◽  
Arch Dam ◽  
Shaking Table ◽  
Scale Model ◽  
Experimental Investigations ◽  
Shaking Table Tests ◽  
High Arch Dam ◽  
Structural Concrete ◽  
Concrete Material

This paper presents the experimental investigations into the seismic failure for high arch dam with shaking table test. The similitude scale of high arch dam was studied firstly. Then we developed a like concrete material to simulate the mechanical behavior of the structural concrete in high arch dam. The shaking table tests have been performed on the scale model. The experimental results reveal the failure process of high arch dam with respect to the different earthquake intensities.

Shaking Table Tests on 1/3-Scale Model of Wooden Horizontal Hybrid Structure

2018 ◽  
Vol 144 (8) ◽  
pp. 04018123 ◽  
Author(s):  
Di Wu ◽  
Yoshihiro Yamazaki ◽  
Sayoko Sawada ◽  
Hiroyasu Sakata
Keyword(s):  
Hybrid Structure ◽  
Shaking Table ◽  
Scale Model ◽  
Shaking Table Tests
Sign in / Sign up

Export Citation Format

Share Document