Using spectroscopic techniques to monitor food composition

Author(s):  
P Grenier ◽  
Cemagref ◽  
R Wilson ◽  
P Niemela¨ ◽  
V Bellen-Maurel
Author(s):  
P. Grenier ◽  
V. Bellon-Maurel ◽  
R. Wilson ◽  
P. Niemelä

Author(s):  
Marcos F. Maestre

Recently we have developed a form of polarization microscopy that forms images using optical properties that have previously been limited to macroscopic samples. This has given us a new window into the distribution of structure on a microscopic scale. We have coined the name differential polarization microscopy to identify the images obtained that are due to certain polarization dependent effects. Differential polarization microscopy has its origins in various spectroscopic techniques that have been used to study longer range structures in solution as well as solids. The differential scattering of circularly polarized light has been shown to be dependent on the long range chiral order, both theoretically and experimentally. The same theoretical approach was used to show that images due to differential scattering of circularly polarized light will give images dependent on chiral structures. With large helices (greater than the wavelength of light) the pitch and radius of the helix could be measured directly from these images.


Author(s):  
Bradley L. Thiel ◽  
Chan Han R. P. ◽  
Kurosky L. C. Hutter ◽  
I. A. Aksay ◽  
Mehmet Sarikaya

The identification of extraneous phases is important in understanding of high Tc superconducting oxides. The spectroscopic techniques commonly used in determining the origin of superconductivity (such as RAMAN, XPS, AES, and EXAFS) are surface-sensitive. Hence a grain boundary phase several nanometers thick could produce irrelevant spectroscopic results and cause erroneous conclusions. The intergranular phases present a major technological consideration for practical applications. In this communication we report the identification of a Cu2O grain boundary phase which forms during the sintering of YBa2Cu3O7-x (1:2:3 compound).Samples are prepared using a mixture of Y2O3. CuO, and BaO2 powders dispersed in ethanol for complete mixing. The pellets pressed at 20,000 psi are heated to 950°C at a rate of 5°C per min, held for 1 hr, and cooled at 1°C per min to room temperature. The samples show a Tc of 91K with a transition width of 2K. In order to prevent damage, a low temperature stage is used in milling to prepare thin foils which are then observed, using a liquid nitrogen holder, in a Philips 430T at 300 kV.


2012 ◽  
Vol 82 (3) ◽  
pp. 209-215 ◽  
Author(s):  
Simone Bell ◽  
Heikki Pakkala ◽  
Michael P. Finglas

Food composition data (FCD) comprises the description and identification of foods, as well as their nutrient content, other constituents, and food properties. FCD are required for a range of purposes including food labeling, supporting health claims, nutritional and clinical management, consumer information, and research. There have been differences within and beyond Europe in the way FCD are expressed with respect to food description, definition of nutrients and other food properties, and the methods used to generate data. One of the major goals of the EuroFIR NoE project (2005 - 10) was to provide tools to overcome existing differences among member states and parties with respect to documentation and interchange of FCD. The establishment of the CEN’s (European Committee for Standardisation) TC 387 project committee on Food Composition Data, led by the Swedish Standards Institute, and the preparation of the draft Food Data Standard, has addressed these deficiencies by enabling unambiguous identification and description of FCD and their quality, for dissemination and data interchange. Another major achievement of the EuroFIR NoE project was the development and dissemination of a single, authoritative source of FCD in Europe enabling the interchange and update of data between countries, and also giving access to users of FCD.


1997 ◽  
Vol 77 (03) ◽  
pp. 504-509 ◽  
Author(s):  
Sarah L Booth ◽  
Jacqueline M Charnley ◽  
James A Sadowski ◽  
Edward Saltzman ◽  
Edwin G Bovill ◽  
...  

SummaryCase reports cited in Medline or Biological Abstracts (1966-1996) were reviewed to evaluate the impact of vitamin K1 dietary intake on the stability of anticoagulant control in patients using coumarin derivatives. Reported nutrient-drug interactions cannot always be explained by the vitamin K1 content of the food items. However, metabolic data indicate that a consistent dietary intake of vitamin K is important to attain a daily equilibrium in vitamin K status. We report a diet that provides a stable intake of vitamin K1, equivalent to the current U.S. Recommended Dietary Allowance, using food composition data derived from high-performance liquid chromatography. Inconsistencies in the published literature indicate that prospective clinical studies should be undertaken to clarify the putative dietary vitamin K1-coumarin interaction. The dietary guidelines reported here may be used in such studies.


2011 ◽  
Vol 7 (2) ◽  
pp. 1338-1347
Author(s):  
Tarek Ali Fahad ◽  
Shaker.A.N. AL-Jadaan

Two new heterocyclic Organmercury compounds   were prepared from the reaction of Sulfamethaxazole and Sulfadiazine with 4-acetaminophenol as a coupler and separated as solids with characteristic colors. these compounds were characterized by F.T.IR-spectroscopy 1H-NMR , Micro-elemental Analysis and UV-Vis spectroscopic techniques . The work involves a study of acid – base properties compounds at different pH values, the ionization and protonation constants were calculated. The thermal behavior of these two compounds   were investigated on the basis of thermogravimetric (TGA) and differential thermogravimetric (DTG) analyses, Thermal decomposition of these compounds is multi-stage processes.


Author(s):  
Lenore Arab ◽  
Marion Wittler ◽  
Gotthard Schettler

2018 ◽  
Author(s):  
Ravi Shankar ◽  
Sofia Marchesini ◽  
Camille Petit

Porous boron nitride is gaining significant attention for applications in molecular separations, photocatalysis, and drug delivery. All these areas call for a high degree of stability (or a controlled stability) over a range of chemical environments, and particularly under humid conditions. The hydrolytic stability of the various forms of boron nitride, including porous boron nitride, has been sparingly addressed in the literature. Here, we map the physical-chemical properties of the material to its hydrolytic stability for a range of conditions. Using analytical, imaging and spectroscopic techniques, we identify the links between the hydrolytic instability of porous boron nitride and its limited crystallinity, high porosity as well as the presence of oxygen atoms. To address this instability issue, we demonstrate that subjecting the material to a thermal treatment leads to the formation of crystalline domains of h-BN exhibiting a hydrophobic character. The heat-treated sample exhibits enhanced hydrolytic stability, while maintaining a high porosity. This work provides an effective and simple approach to producing stable porous boron nitride structures, and will progress the implementation of the material in applications involving interfacial phenomena.<br>


Sign in / Sign up

Export Citation Format

Share Document